freebsd-skq/bin/pax/cpio.c
pfg 872b698bd4 General further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:49:47 +00:00

1155 lines
29 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1992 Keith Muller.
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Keith Muller of the University of California, San Diego.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
#if 0
static char sccsid[] = "@(#)cpio.c 8.1 (Berkeley) 5/31/93";
#endif
#endif /* not lint */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/time.h>
#include <sys/stat.h>
#include <string.h>
#include <stdint.h>
#include <stdio.h>
#include "pax.h"
#include "cpio.h"
#include "extern.h"
static int rd_nm(ARCHD *, int);
static int rd_ln_nm(ARCHD *);
static int com_rd(ARCHD *);
/*
* Routines which support the different cpio versions
*/
static int swp_head; /* binary cpio header byte swap */
/*
* Routines common to all versions of cpio
*/
/*
* cpio_strd()
* Fire up the hard link detection code
* Return:
* 0 if ok -1 otherwise (the return values of lnk_start())
*/
int
cpio_strd(void)
{
return(lnk_start());
}
/*
* cpio_trail()
* Called to determine if a header block is a valid trailer. We are
* passed the block, the in_sync flag (which tells us we are in resync
* mode; looking for a valid header), and cnt (which starts at zero)
* which is used to count the number of empty blocks we have seen so far.
* Return:
* 0 if a valid trailer, -1 if not a valid trailer,
*/
int
cpio_trail(ARCHD *arcn)
{
/*
* look for trailer id in file we are about to process
*/
if ((strcmp(arcn->name, TRAILER) == 0) && (arcn->sb.st_size == 0))
return(0);
return(-1);
}
/*
* com_rd()
* operations common to all cpio read functions.
* Return:
* 0
*/
static int
com_rd(ARCHD *arcn)
{
arcn->skip = 0;
arcn->pat = NULL;
arcn->org_name = arcn->name;
switch(arcn->sb.st_mode & C_IFMT) {
case C_ISFIFO:
arcn->type = PAX_FIF;
break;
case C_ISDIR:
arcn->type = PAX_DIR;
break;
case C_ISBLK:
arcn->type = PAX_BLK;
break;
case C_ISCHR:
arcn->type = PAX_CHR;
break;
case C_ISLNK:
arcn->type = PAX_SLK;
break;
case C_ISOCK:
arcn->type = PAX_SCK;
break;
case C_ISCTG:
case C_ISREG:
default:
/*
* we have file data, set up skip (pad is set in the format
* specific sections)
*/
arcn->sb.st_mode = (arcn->sb.st_mode & 0xfff) | C_ISREG;
arcn->type = PAX_REG;
arcn->skip = arcn->sb.st_size;
break;
}
if (chk_lnk(arcn) < 0)
return(-1);
return(0);
}
/*
* cpio_end_wr()
* write the special file with the name trailer in the proper format
* Return:
* result of the write of the trailer from the cpio specific write func
*/
int
cpio_endwr(void)
{
ARCHD last;
/*
* create a trailer request and call the proper format write function
*/
memset(&last, 0, sizeof(last));
last.nlen = sizeof(TRAILER) - 1;
last.type = PAX_REG;
last.sb.st_nlink = 1;
(void)strcpy(last.name, TRAILER);
return((*frmt->wr)(&last));
}
/*
* rd_nam()
* read in the file name which follows the cpio header
* Return:
* 0 if ok, -1 otherwise
*/
static int
rd_nm(ARCHD *arcn, int nsz)
{
/*
* do not even try bogus values
*/
if ((nsz == 0) || (nsz > (int)sizeof(arcn->name))) {
paxwarn(1, "Cpio file name length %d is out of range", nsz);
return(-1);
}
/*
* read the name and make sure it is not empty and is \0 terminated
*/
if ((rd_wrbuf(arcn->name,nsz) != nsz) || (arcn->name[nsz-1] != '\0') ||
(arcn->name[0] == '\0')) {
paxwarn(1, "Cpio file name in header is corrupted");
return(-1);
}
return(0);
}
/*
* rd_ln_nm()
* read in the link name for a file with links. The link name is stored
* like file data (and is NOT \0 terminated!)
* Return:
* 0 if ok, -1 otherwise
*/
static int
rd_ln_nm(ARCHD *arcn)
{
/*
* check the length specified for bogus values
*/
if ((arcn->sb.st_size == 0) ||
((size_t)arcn->sb.st_size >= sizeof(arcn->ln_name))) {
# ifdef NET2_STAT
paxwarn(1, "Cpio link name length is invalid: %lu",
arcn->sb.st_size);
# else
paxwarn(1, "Cpio link name length is invalid: %ju",
(uintmax_t)arcn->sb.st_size);
# endif
return(-1);
}
/*
* read in the link name and \0 terminate it
*/
if (rd_wrbuf(arcn->ln_name, (int)arcn->sb.st_size) !=
(int)arcn->sb.st_size) {
paxwarn(1, "Cpio link name read error");
return(-1);
}
arcn->ln_nlen = arcn->sb.st_size;
arcn->ln_name[arcn->ln_nlen] = '\0';
/*
* watch out for those empty link names
*/
if (arcn->ln_name[0] == '\0') {
paxwarn(1, "Cpio link name is corrupt");
return(-1);
}
return(0);
}
/*
* Routines common to the extended byte oriented cpio format
*/
/*
* cpio_id()
* determine if a block given to us is a valid extended byte oriented
* cpio header
* Return:
* 0 if a valid header, -1 otherwise
*/
int
cpio_id(char *blk, int size)
{
if ((size < (int)sizeof(HD_CPIO)) ||
(strncmp(blk, AMAGIC, sizeof(AMAGIC) - 1) != 0))
return(-1);
return(0);
}
/*
* cpio_rd()
* determine if a buffer is a byte oriented extended cpio archive entry.
* convert and store the values in the ARCHD parameter.
* Return:
* 0 if a valid header, -1 otherwise.
*/
int
cpio_rd(ARCHD *arcn, char *buf)
{
int nsz;
HD_CPIO *hd;
/*
* check that this is a valid header, if not return -1
*/
if (cpio_id(buf, sizeof(HD_CPIO)) < 0)
return(-1);
hd = (HD_CPIO *)buf;
/*
* byte oriented cpio (posix) does not have padding! extract the octal
* ascii fields from the header
*/
arcn->pad = 0L;
arcn->sb.st_dev = (dev_t)asc_ul(hd->c_dev, sizeof(hd->c_dev), OCT);
arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), OCT);
arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), OCT);
arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), OCT);
arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), OCT);
arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink),
OCT);
arcn->sb.st_rdev = (dev_t)asc_ul(hd->c_rdev, sizeof(hd->c_rdev), OCT);
#ifdef NET2_STAT
arcn->sb.st_mtime = (time_t)asc_ul(hd->c_mtime, sizeof(hd->c_mtime),
OCT);
#else
arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime, sizeof(hd->c_mtime),
OCT);
#endif
arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
#ifdef NET2_STAT
arcn->sb.st_size = (off_t)asc_ul(hd->c_filesize,sizeof(hd->c_filesize),
OCT);
#else
arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,sizeof(hd->c_filesize),
OCT);
#endif
/*
* check name size and if valid, read in the name of this entry (name
* follows header in the archive)
*/
if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),OCT)) < 2)
return(-1);
arcn->nlen = nsz - 1;
if (rd_nm(arcn, nsz) < 0)
return(-1);
if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) {
/*
* no link name to read for this file
*/
arcn->ln_nlen = 0;
arcn->ln_name[0] = '\0';
return(com_rd(arcn));
}
/*
* check link name size and read in the link name. Link names are
* stored like file data.
*/
if (rd_ln_nm(arcn) < 0)
return(-1);
/*
* we have a valid header (with a link)
*/
return(com_rd(arcn));
}
/*
* cpio_endrd()
* no cleanup needed here, just return size of the trailer (for append)
* Return:
* size of trailer header in this format
*/
off_t
cpio_endrd(void)
{
return((off_t)(sizeof(HD_CPIO) + sizeof(TRAILER)));
}
/*
* cpio_stwr()
* start up the device mapping table
* Return:
* 0 if ok, -1 otherwise (what dev_start() returns)
*/
int
cpio_stwr(void)
{
return(dev_start());
}
/*
* cpio_wr()
* copy the data in the ARCHD to buffer in extended byte oriented cpio
* format.
* Return
* 0 if file has data to be written after the header, 1 if file has NO
* data to write after the header, -1 if archive write failed
*/
int
cpio_wr(ARCHD *arcn)
{
HD_CPIO *hd;
int nsz;
HD_CPIO hdblk;
/*
* check and repair truncated device and inode fields in the header
*/
if (map_dev(arcn, (u_long)CPIO_MASK, (u_long)CPIO_MASK) < 0)
return(-1);
arcn->pad = 0L;
nsz = arcn->nlen + 1;
hd = &hdblk;
if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
arcn->sb.st_rdev = 0;
switch(arcn->type) {
case PAX_CTG:
case PAX_REG:
case PAX_HRG:
/*
* set data size for file data
*/
# ifdef NET2_STAT
if (ul_asc((u_long)arcn->sb.st_size, hd->c_filesize,
sizeof(hd->c_filesize), OCT)) {
# else
if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize,
sizeof(hd->c_filesize), OCT)) {
# endif
paxwarn(1,"File is too large for cpio format %s",
arcn->org_name);
return(1);
}
break;
case PAX_SLK:
/*
* set data size to hold link name
*/
if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize,
sizeof(hd->c_filesize), OCT))
goto out;
break;
default:
/*
* all other file types have no file data
*/
if (ul_asc((u_long)0, hd->c_filesize, sizeof(hd->c_filesize),
OCT))
goto out;
break;
}
/*
* copy the values to the header using octal ascii
*/
if (ul_asc((u_long)MAGIC, hd->c_magic, sizeof(hd->c_magic), OCT) ||
ul_asc((u_long)arcn->sb.st_dev, hd->c_dev, sizeof(hd->c_dev),
OCT) ||
ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino),
OCT) ||
ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode),
OCT) ||
ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid),
OCT) ||
ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid),
OCT) ||
ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink),
OCT) ||
ul_asc((u_long)arcn->sb.st_rdev, hd->c_rdev, sizeof(hd->c_rdev),
OCT) ||
ul_asc((u_long)arcn->sb.st_mtime,hd->c_mtime,sizeof(hd->c_mtime),
OCT) ||
ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), OCT))
goto out;
/*
* write the file name to the archive
*/
if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_CPIO)) < 0) ||
(wr_rdbuf(arcn->name, nsz) < 0)) {
paxwarn(1, "Unable to write cpio header for %s", arcn->org_name);
return(-1);
}
/*
* if this file has data, we are done. The caller will write the file
* data, if we are link tell caller we are done, go to next file
*/
if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
(arcn->type == PAX_HRG))
return(0);
if (arcn->type != PAX_SLK)
return(1);
/*
* write the link name to the archive, tell the caller to go to the
* next file as we are done.
*/
if (wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) {
paxwarn(1,"Unable to write cpio link name for %s",arcn->org_name);
return(-1);
}
return(1);
out:
/*
* header field is out of range
*/
paxwarn(1, "Cpio header field is too small to store file %s",
arcn->org_name);
return(1);
}
/*
* Routines common to the system VR4 version of cpio (with/without file CRC)
*/
/*
* vcpio_id()
* determine if a block given to us is a valid system VR4 cpio header
* WITHOUT crc. WATCH it the magic cookies are in OCTAL, the header
* uses HEX
* Return:
* 0 if a valid header, -1 otherwise
*/
int
vcpio_id(char *blk, int size)
{
if ((size < (int)sizeof(HD_VCPIO)) ||
(strncmp(blk, AVMAGIC, sizeof(AVMAGIC) - 1) != 0))
return(-1);
return(0);
}
/*
* crc_id()
* determine if a block given to us is a valid system VR4 cpio header
* WITH crc. WATCH it the magic cookies are in OCTAL the header uses HEX
* Return:
* 0 if a valid header, -1 otherwise
*/
int
crc_id(char *blk, int size)
{
if ((size < (int)sizeof(HD_VCPIO)) ||
(strncmp(blk, AVCMAGIC, (int)sizeof(AVCMAGIC) - 1) != 0))
return(-1);
return(0);
}
/*
* crc_strd()
w set file data CRC calculations. Fire up the hard link detection code
* Return:
* 0 if ok -1 otherwise (the return values of lnk_start())
*/
int
crc_strd(void)
{
docrc = 1;
return(lnk_start());
}
/*
* vcpio_rd()
* determine if a buffer is a system VR4 archive entry. (with/without CRC)
* convert and store the values in the ARCHD parameter.
* Return:
* 0 if a valid header, -1 otherwise.
*/
int
vcpio_rd(ARCHD *arcn, char *buf)
{
HD_VCPIO *hd;
dev_t devminor;
dev_t devmajor;
int nsz;
/*
* during the id phase it was determined if we were using CRC, use the
* proper id routine.
*/
if (docrc) {
if (crc_id(buf, sizeof(HD_VCPIO)) < 0)
return(-1);
} else {
if (vcpio_id(buf, sizeof(HD_VCPIO)) < 0)
return(-1);
}
hd = (HD_VCPIO *)buf;
arcn->pad = 0L;
/*
* extract the hex ascii fields from the header
*/
arcn->sb.st_ino = (ino_t)asc_ul(hd->c_ino, sizeof(hd->c_ino), HEX);
arcn->sb.st_mode = (mode_t)asc_ul(hd->c_mode, sizeof(hd->c_mode), HEX);
arcn->sb.st_uid = (uid_t)asc_ul(hd->c_uid, sizeof(hd->c_uid), HEX);
arcn->sb.st_gid = (gid_t)asc_ul(hd->c_gid, sizeof(hd->c_gid), HEX);
#ifdef NET2_STAT
arcn->sb.st_mtime = (time_t)asc_ul(hd->c_mtime,sizeof(hd->c_mtime),HEX);
#else
arcn->sb.st_mtime = (time_t)asc_uqd(hd->c_mtime,sizeof(hd->c_mtime),HEX);
#endif
arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
#ifdef NET2_STAT
arcn->sb.st_size = (off_t)asc_ul(hd->c_filesize,
sizeof(hd->c_filesize), HEX);
#else
arcn->sb.st_size = (off_t)asc_uqd(hd->c_filesize,
sizeof(hd->c_filesize), HEX);
#endif
arcn->sb.st_nlink = (nlink_t)asc_ul(hd->c_nlink, sizeof(hd->c_nlink),
HEX);
devmajor = (dev_t)asc_ul(hd->c_maj, sizeof(hd->c_maj), HEX);
devminor = (dev_t)asc_ul(hd->c_min, sizeof(hd->c_min), HEX);
arcn->sb.st_dev = TODEV(devmajor, devminor);
devmajor = (dev_t)asc_ul(hd->c_rmaj, sizeof(hd->c_maj), HEX);
devminor = (dev_t)asc_ul(hd->c_rmin, sizeof(hd->c_min), HEX);
arcn->sb.st_rdev = TODEV(devmajor, devminor);
arcn->crc = asc_ul(hd->c_chksum, sizeof(hd->c_chksum), HEX);
/*
* check the length of the file name, if ok read it in, return -1 if
* bogus
*/
if ((nsz = (int)asc_ul(hd->c_namesize,sizeof(hd->c_namesize),HEX)) < 2)
return(-1);
arcn->nlen = nsz - 1;
if (rd_nm(arcn, nsz) < 0)
return(-1);
/*
* skip padding. header + filename is aligned to 4 byte boundaries
*/
if (rd_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)
return(-1);
/*
* if not a link (or a file with no data), calculate pad size (for
* padding which follows the file data), clear the link name and return
*/
if (((arcn->sb.st_mode&C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)) {
/*
* we have a valid header (not a link)
*/
arcn->ln_nlen = 0;
arcn->ln_name[0] = '\0';
arcn->pad = VCPIO_PAD(arcn->sb.st_size);
return(com_rd(arcn));
}
/*
* read in the link name and skip over the padding
*/
if ((rd_ln_nm(arcn) < 0) ||
(rd_skip((off_t)(VCPIO_PAD(arcn->sb.st_size))) < 0))
return(-1);
/*
* we have a valid header (with a link)
*/
return(com_rd(arcn));
}
/*
* vcpio_endrd()
* no cleanup needed here, just return size of the trailer (for append)
* Return:
* size of trailer header in this format
*/
off_t
vcpio_endrd(void)
{
return((off_t)(sizeof(HD_VCPIO) + sizeof(TRAILER) +
(VCPIO_PAD(sizeof(HD_VCPIO) + sizeof(TRAILER)))));
}
/*
* crc_stwr()
* start up the device mapping table, enable crc file calculation
* Return:
* 0 if ok, -1 otherwise (what dev_start() returns)
*/
int
crc_stwr(void)
{
docrc = 1;
return(dev_start());
}
/*
* vcpio_wr()
* copy the data in the ARCHD to buffer in system VR4 cpio
* (with/without crc) format.
* Return
* 0 if file has data to be written after the header, 1 if file has
* NO data to write after the header, -1 if archive write failed
*/
int
vcpio_wr(ARCHD *arcn)
{
HD_VCPIO *hd;
unsigned int nsz;
HD_VCPIO hdblk;
/*
* check and repair truncated device and inode fields in the cpio
* header
*/
if (map_dev(arcn, (u_long)VCPIO_MASK, (u_long)VCPIO_MASK) < 0)
return(-1);
nsz = arcn->nlen + 1;
hd = &hdblk;
if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
arcn->sb.st_rdev = 0;
/*
* add the proper magic value depending whether we were asked for
* file data crc's, and the crc if needed.
*/
if (docrc) {
if (ul_asc((u_long)VCMAGIC, hd->c_magic, sizeof(hd->c_magic),
OCT) ||
ul_asc((u_long)arcn->crc,hd->c_chksum,sizeof(hd->c_chksum),
HEX))
goto out;
} else {
if (ul_asc((u_long)VMAGIC, hd->c_magic, sizeof(hd->c_magic),
OCT) ||
ul_asc((u_long)0L, hd->c_chksum, sizeof(hd->c_chksum),HEX))
goto out;
}
switch(arcn->type) {
case PAX_CTG:
case PAX_REG:
case PAX_HRG:
/*
* caller will copy file data to the archive. tell him how
* much to pad.
*/
arcn->pad = VCPIO_PAD(arcn->sb.st_size);
# ifdef NET2_STAT
if (ul_asc((u_long)arcn->sb.st_size, hd->c_filesize,
sizeof(hd->c_filesize), HEX)) {
# else
if (uqd_asc((u_quad_t)arcn->sb.st_size, hd->c_filesize,
sizeof(hd->c_filesize), HEX)) {
# endif
paxwarn(1,"File is too large for sv4cpio format %s",
arcn->org_name);
return(1);
}
break;
case PAX_SLK:
/*
* no file data for the caller to process, the file data has
* the size of the link
*/
arcn->pad = 0L;
if (ul_asc((u_long)arcn->ln_nlen, hd->c_filesize,
sizeof(hd->c_filesize), HEX))
goto out;
break;
default:
/*
* no file data for the caller to process
*/
arcn->pad = 0L;
if (ul_asc((u_long)0L, hd->c_filesize, sizeof(hd->c_filesize),
HEX))
goto out;
break;
}
/*
* set the other fields in the header
*/
if (ul_asc((u_long)arcn->sb.st_ino, hd->c_ino, sizeof(hd->c_ino),
HEX) ||
ul_asc((u_long)arcn->sb.st_mode, hd->c_mode, sizeof(hd->c_mode),
HEX) ||
ul_asc((u_long)arcn->sb.st_uid, hd->c_uid, sizeof(hd->c_uid),
HEX) ||
ul_asc((u_long)arcn->sb.st_gid, hd->c_gid, sizeof(hd->c_gid),
HEX) ||
ul_asc((u_long)arcn->sb.st_mtime, hd->c_mtime, sizeof(hd->c_mtime),
HEX) ||
ul_asc((u_long)arcn->sb.st_nlink, hd->c_nlink, sizeof(hd->c_nlink),
HEX) ||
ul_asc((u_long)MAJOR(arcn->sb.st_dev),hd->c_maj, sizeof(hd->c_maj),
HEX) ||
ul_asc((u_long)MINOR(arcn->sb.st_dev),hd->c_min, sizeof(hd->c_min),
HEX) ||
ul_asc((u_long)MAJOR(arcn->sb.st_rdev),hd->c_rmaj,sizeof(hd->c_maj),
HEX) ||
ul_asc((u_long)MINOR(arcn->sb.st_rdev),hd->c_rmin,sizeof(hd->c_min),
HEX) ||
ul_asc((u_long)nsz, hd->c_namesize, sizeof(hd->c_namesize), HEX))
goto out;
/*
* write the header, the file name and padding as required.
*/
if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_VCPIO)) < 0) ||
(wr_rdbuf(arcn->name, (int)nsz) < 0) ||
(wr_skip((off_t)(VCPIO_PAD(sizeof(HD_VCPIO) + nsz))) < 0)) {
paxwarn(1,"Could not write sv4cpio header for %s",arcn->org_name);
return(-1);
}
/*
* if we have file data, tell the caller we are done, copy the file
*/
if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
(arcn->type == PAX_HRG))
return(0);
/*
* if we are not a link, tell the caller we are done, go to next file
*/
if (arcn->type != PAX_SLK)
return(1);
/*
* write the link name, tell the caller we are done.
*/
if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) ||
(wr_skip((off_t)(VCPIO_PAD(arcn->ln_nlen))) < 0)) {
paxwarn(1,"Could not write sv4cpio link name for %s",
arcn->org_name);
return(-1);
}
return(1);
out:
/*
* header field is out of range
*/
paxwarn(1,"Sv4cpio header field is too small for file %s",arcn->org_name);
return(1);
}
/*
* Routines common to the old binary header cpio
*/
/*
* bcpio_id()
* determine if a block given to us is an old binary cpio header
* (with/without header byte swapping)
* Return:
* 0 if a valid header, -1 otherwise
*/
int
bcpio_id(char *blk, int size)
{
if (size < (int)sizeof(HD_BCPIO))
return(-1);
/*
* check both normal and byte swapped magic cookies
*/
if (((u_short)SHRT_EXT(blk)) == MAGIC)
return(0);
if (((u_short)RSHRT_EXT(blk)) == MAGIC) {
if (!swp_head)
++swp_head;
return(0);
}
return(-1);
}
/*
* bcpio_rd()
* determine if a buffer is an old binary archive entry. (It may have byte
* swapped header) convert and store the values in the ARCHD parameter.
* This is a very old header format and should not really be used.
* Return:
* 0 if a valid header, -1 otherwise.
*/
int
bcpio_rd(ARCHD *arcn, char *buf)
{
HD_BCPIO *hd;
int nsz;
/*
* check the header
*/
if (bcpio_id(buf, sizeof(HD_BCPIO)) < 0)
return(-1);
arcn->pad = 0L;
hd = (HD_BCPIO *)buf;
if (swp_head) {
/*
* header has swapped bytes on 16 bit boundaries
*/
arcn->sb.st_dev = (dev_t)(RSHRT_EXT(hd->h_dev));
arcn->sb.st_ino = (ino_t)(RSHRT_EXT(hd->h_ino));
arcn->sb.st_mode = (mode_t)(RSHRT_EXT(hd->h_mode));
arcn->sb.st_uid = (uid_t)(RSHRT_EXT(hd->h_uid));
arcn->sb.st_gid = (gid_t)(RSHRT_EXT(hd->h_gid));
arcn->sb.st_nlink = (nlink_t)(RSHRT_EXT(hd->h_nlink));
arcn->sb.st_rdev = (dev_t)(RSHRT_EXT(hd->h_rdev));
arcn->sb.st_mtime = (time_t)(RSHRT_EXT(hd->h_mtime_1));
arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) |
((time_t)(RSHRT_EXT(hd->h_mtime_2)));
arcn->sb.st_size = (off_t)(RSHRT_EXT(hd->h_filesize_1));
arcn->sb.st_size = (arcn->sb.st_size << 16) |
((off_t)(RSHRT_EXT(hd->h_filesize_2)));
nsz = (int)(RSHRT_EXT(hd->h_namesize));
} else {
arcn->sb.st_dev = (dev_t)(SHRT_EXT(hd->h_dev));
arcn->sb.st_ino = (ino_t)(SHRT_EXT(hd->h_ino));
arcn->sb.st_mode = (mode_t)(SHRT_EXT(hd->h_mode));
arcn->sb.st_uid = (uid_t)(SHRT_EXT(hd->h_uid));
arcn->sb.st_gid = (gid_t)(SHRT_EXT(hd->h_gid));
arcn->sb.st_nlink = (nlink_t)(SHRT_EXT(hd->h_nlink));
arcn->sb.st_rdev = (dev_t)(SHRT_EXT(hd->h_rdev));
arcn->sb.st_mtime = (time_t)(SHRT_EXT(hd->h_mtime_1));
arcn->sb.st_mtime = (arcn->sb.st_mtime << 16) |
((time_t)(SHRT_EXT(hd->h_mtime_2)));
arcn->sb.st_size = (off_t)(SHRT_EXT(hd->h_filesize_1));
arcn->sb.st_size = (arcn->sb.st_size << 16) |
((off_t)(SHRT_EXT(hd->h_filesize_2)));
nsz = (int)(SHRT_EXT(hd->h_namesize));
}
arcn->sb.st_ctime = arcn->sb.st_atime = arcn->sb.st_mtime;
/*
* check the file name size, if bogus give up. otherwise read the file
* name
*/
if (nsz < 2)
return(-1);
arcn->nlen = nsz - 1;
if (rd_nm(arcn, nsz) < 0)
return(-1);
/*
* header + file name are aligned to 2 byte boundaries, skip if needed
*/
if (rd_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)
return(-1);
/*
* if not a link (or a file with no data), calculate pad size (for
* padding which follows the file data), clear the link name and return
*/
if (((arcn->sb.st_mode & C_IFMT) != C_ISLNK)||(arcn->sb.st_size == 0)){
/*
* we have a valid header (not a link)
*/
arcn->ln_nlen = 0;
arcn->ln_name[0] = '\0';
arcn->pad = BCPIO_PAD(arcn->sb.st_size);
return(com_rd(arcn));
}
if ((rd_ln_nm(arcn) < 0) ||
(rd_skip((off_t)(BCPIO_PAD(arcn->sb.st_size))) < 0))
return(-1);
/*
* we have a valid header (with a link)
*/
return(com_rd(arcn));
}
/*
* bcpio_endrd()
* no cleanup needed here, just return size of the trailer (for append)
* Return:
* size of trailer header in this format
*/
off_t
bcpio_endrd(void)
{
return((off_t)(sizeof(HD_BCPIO) + sizeof(TRAILER) +
(BCPIO_PAD(sizeof(HD_BCPIO) + sizeof(TRAILER)))));
}
/*
* bcpio_wr()
* copy the data in the ARCHD to buffer in old binary cpio format
* There is a real chance of field overflow with this critter. So we
* always check that the conversion is ok. nobody in their right mind
* should write an archive in this format...
* Return
* 0 if file has data to be written after the header, 1 if file has NO
* data to write after the header, -1 if archive write failed
*/
int
bcpio_wr(ARCHD *arcn)
{
HD_BCPIO *hd;
int nsz;
HD_BCPIO hdblk;
off_t t_offt;
int t_int;
time_t t_timet;
/*
* check and repair truncated device and inode fields in the cpio
* header
*/
if (map_dev(arcn, (u_long)BCPIO_MASK, (u_long)BCPIO_MASK) < 0)
return(-1);
if ((arcn->type != PAX_BLK) && (arcn->type != PAX_CHR))
arcn->sb.st_rdev = 0;
hd = &hdblk;
switch(arcn->type) {
case PAX_CTG:
case PAX_REG:
case PAX_HRG:
/*
* caller will copy file data to the archive. tell him how
* much to pad.
*/
arcn->pad = BCPIO_PAD(arcn->sb.st_size);
hd->h_filesize_1[0] = CHR_WR_0(arcn->sb.st_size);
hd->h_filesize_1[1] = CHR_WR_1(arcn->sb.st_size);
hd->h_filesize_2[0] = CHR_WR_2(arcn->sb.st_size);
hd->h_filesize_2[1] = CHR_WR_3(arcn->sb.st_size);
t_offt = (off_t)(SHRT_EXT(hd->h_filesize_1));
t_offt = (t_offt<<16) | ((off_t)(SHRT_EXT(hd->h_filesize_2)));
if (arcn->sb.st_size != t_offt) {
paxwarn(1,"File is too large for bcpio format %s",
arcn->org_name);
return(1);
}
break;
case PAX_SLK:
/*
* no file data for the caller to process, the file data has
* the size of the link
*/
arcn->pad = 0L;
hd->h_filesize_1[0] = CHR_WR_0(arcn->ln_nlen);
hd->h_filesize_1[1] = CHR_WR_1(arcn->ln_nlen);
hd->h_filesize_2[0] = CHR_WR_2(arcn->ln_nlen);
hd->h_filesize_2[1] = CHR_WR_3(arcn->ln_nlen);
t_int = (int)(SHRT_EXT(hd->h_filesize_1));
t_int = (t_int << 16) | ((int)(SHRT_EXT(hd->h_filesize_2)));
if (arcn->ln_nlen != t_int)
goto out;
break;
default:
/*
* no file data for the caller to process
*/
arcn->pad = 0L;
hd->h_filesize_1[0] = (char)0;
hd->h_filesize_1[1] = (char)0;
hd->h_filesize_2[0] = (char)0;
hd->h_filesize_2[1] = (char)0;
break;
}
/*
* build up the rest of the fields
*/
hd->h_magic[0] = CHR_WR_2(MAGIC);
hd->h_magic[1] = CHR_WR_3(MAGIC);
hd->h_dev[0] = CHR_WR_2(arcn->sb.st_dev);
hd->h_dev[1] = CHR_WR_3(arcn->sb.st_dev);
if (arcn->sb.st_dev != (dev_t)(SHRT_EXT(hd->h_dev)))
goto out;
hd->h_ino[0] = CHR_WR_2(arcn->sb.st_ino);
hd->h_ino[1] = CHR_WR_3(arcn->sb.st_ino);
if (arcn->sb.st_ino != (ino_t)(SHRT_EXT(hd->h_ino)))
goto out;
hd->h_mode[0] = CHR_WR_2(arcn->sb.st_mode);
hd->h_mode[1] = CHR_WR_3(arcn->sb.st_mode);
if (arcn->sb.st_mode != (mode_t)(SHRT_EXT(hd->h_mode)))
goto out;
hd->h_uid[0] = CHR_WR_2(arcn->sb.st_uid);
hd->h_uid[1] = CHR_WR_3(arcn->sb.st_uid);
if (arcn->sb.st_uid != (uid_t)(SHRT_EXT(hd->h_uid)))
goto out;
hd->h_gid[0] = CHR_WR_2(arcn->sb.st_gid);
hd->h_gid[1] = CHR_WR_3(arcn->sb.st_gid);
if (arcn->sb.st_gid != (gid_t)(SHRT_EXT(hd->h_gid)))
goto out;
hd->h_nlink[0] = CHR_WR_2(arcn->sb.st_nlink);
hd->h_nlink[1] = CHR_WR_3(arcn->sb.st_nlink);
if (arcn->sb.st_nlink != (nlink_t)(SHRT_EXT(hd->h_nlink)))
goto out;
hd->h_rdev[0] = CHR_WR_2(arcn->sb.st_rdev);
hd->h_rdev[1] = CHR_WR_3(arcn->sb.st_rdev);
if (arcn->sb.st_rdev != (dev_t)(SHRT_EXT(hd->h_rdev)))
goto out;
hd->h_mtime_1[0] = CHR_WR_0(arcn->sb.st_mtime);
hd->h_mtime_1[1] = CHR_WR_1(arcn->sb.st_mtime);
hd->h_mtime_2[0] = CHR_WR_2(arcn->sb.st_mtime);
hd->h_mtime_2[1] = CHR_WR_3(arcn->sb.st_mtime);
t_timet = (time_t)(SHRT_EXT(hd->h_mtime_1));
t_timet = (t_timet << 16) | ((time_t)(SHRT_EXT(hd->h_mtime_2)));
if (arcn->sb.st_mtime != t_timet)
goto out;
nsz = arcn->nlen + 1;
hd->h_namesize[0] = CHR_WR_2(nsz);
hd->h_namesize[1] = CHR_WR_3(nsz);
if (nsz != (int)(SHRT_EXT(hd->h_namesize)))
goto out;
/*
* write the header, the file name and padding as required.
*/
if ((wr_rdbuf((char *)&hdblk, (int)sizeof(HD_BCPIO)) < 0) ||
(wr_rdbuf(arcn->name, nsz) < 0) ||
(wr_skip((off_t)(BCPIO_PAD(sizeof(HD_BCPIO) + nsz))) < 0)) {
paxwarn(1, "Could not write bcpio header for %s", arcn->org_name);
return(-1);
}
/*
* if we have file data, tell the caller we are done
*/
if ((arcn->type == PAX_CTG) || (arcn->type == PAX_REG) ||
(arcn->type == PAX_HRG))
return(0);
/*
* if we are not a link, tell the caller we are done, go to next file
*/
if (arcn->type != PAX_SLK)
return(1);
/*
* write the link name, tell the caller we are done.
*/
if ((wr_rdbuf(arcn->ln_name, arcn->ln_nlen) < 0) ||
(wr_skip((off_t)(BCPIO_PAD(arcn->ln_nlen))) < 0)) {
paxwarn(1,"Could not write bcpio link name for %s",arcn->org_name);
return(-1);
}
return(1);
out:
/*
* header field is out of range
*/
paxwarn(1,"Bcpio header field is too small for file %s", arcn->org_name);
return(1);
}