freebsd-skq/sys/i386/isa/pcibus.c
Stefan Eßer d2a2d5ec41 The PCI config mechanism 1 test failed for the Intel Aries.
Make it less strict ...

Submitted by:	NIIMI Satoshi <sa2c@and.or.jp>
1995-06-30 16:11:42 +00:00

415 lines
9.4 KiB
C

/**************************************************************************
**
** $Id: pcibus.c,v 1.9 1995/06/28 15:54:57 se Exp $
**
** pci bus subroutines for i386 architecture.
**
** FreeBSD
**
**-------------------------------------------------------------------------
**
** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
***************************************************************************
*/
#define __PCIBUS_C___ "pl4 95/03/21"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <i386/isa/icu.h>
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include <pci/pcibus.h>
/*-----------------------------------------------------------------
**
** The following functions are provided by the pci bios.
** They are used only by the pci configuration.
**
** pcibus_setup():
** Probes for a pci system.
** Sets pci_maxdevice and pci_mechanism.
**
** pcibus_tag():
** Creates a handle for pci configuration space access.
** This handle is given to the read/write functions.
**
** pcibus_ftag():
** Creates a modified handle.
**
** pcibus_read():
** Read a long word from the pci configuration space.
** Requires a tag (from pcitag) and the register
** number (should be a long word alligned one).
**
** pcibus_write():
** Writes a long word to the pci configuration space.
** Requires a tag (from pcitag), the register number
** (should be a long word alligned one), and a value.
**
** pcibus_regirq():
** Register an interupt handler for a pci device.
** Requires a tag (from pcitag), the register number
** (should be a long word alligned one), and a value.
**
**-----------------------------------------------------------------
*/
static void
pcibus_setup (void);
static pcici_t
pcibus_tag (u_char bus, u_char device, u_char func);
static pcici_t
pcibus_ftag (pcici_t tag, u_char func);
static u_long
pcibus_read (pcici_t tag, u_long reg);
static void
pcibus_write (pcici_t tag, u_long reg, u_long data);
static int
pcibus_ihandler_attach (int irq, void(*ihandler)(), int arg, unsigned* maskp);
static int
pcibus_ihandler_detach (int irq, void(*handler)());
static int
pcibus_imask_include (int irq, unsigned* maskptr);
static int
pcibus_imask_exclude (int irq, unsigned* maskptr);
struct pcibus i386pci = {
"pci",
pcibus_setup,
pcibus_tag,
pcibus_ftag,
pcibus_read,
pcibus_write,
ICU_LEN,
pcibus_ihandler_attach,
pcibus_ihandler_detach,
pcibus_imask_include,
pcibus_imask_exclude,
};
/*
** Announce structure to generic driver
*/
DATA_SET (pcibus_set, i386pci);
/*--------------------------------------------------------------------
**
** Determine configuration mode
**
**--------------------------------------------------------------------
*/
#define CONF1_ENABLE 0x80000000ul
#define CONF1_ENABLE_CHK 0xF0000000ul
#define CONF1_ADDR_PORT 0x0cf8
#define CONF1_DATA_PORT 0x0cfc
#define CONF2_ENABLE_PORT 0x0cf8
#define CONF2_FORWARD_PORT 0x0cfa
static void
pcibus_setup (void)
{
u_long result, oldval;
/*---------------------------------------
** Configuration mode 1 ?
**---------------------------------------
*/
oldval = inl (CONF1_ADDR_PORT);
outl (CONF1_ADDR_PORT, CONF1_ENABLE_CHK);
outb (CONF1_ADDR_PORT +3, 0);
result = inl (CONF1_ADDR_PORT);
outl (CONF1_ADDR_PORT, oldval);
if (result & CONF1_ENABLE) {
pci_mechanism = 1;
pci_maxdevice = 32;
return;
};
/*---------------------------------------
** Configuration mode 2 ?
**---------------------------------------
*/
outb (CONF2_ENABLE_PORT, 0);
outb (CONF2_FORWARD_PORT, 0);
if (!inb (CONF2_ENABLE_PORT) && !inb (CONF2_FORWARD_PORT)) {
pci_mechanism = 2;
pci_maxdevice = 16;
return;
};
/*---------------------------------------
** No PCI bus available.
**---------------------------------------
*/
}
/*--------------------------------------------------------------------
**
** Build a pcitag from bus, device and function number
**
**--------------------------------------------------------------------
*/
static pcici_t
pcibus_tag (unsigned char bus, unsigned char device, unsigned char func)
{
pcici_t tag;
tag.cfg1 = 0;
if (device >= 32) return tag;
if (func >= 8) return tag;
switch (pci_mechanism) {
case 1:
tag.cfg1 = CONF1_ENABLE
| (((u_long) bus ) << 16ul)
| (((u_long) device) << 11ul)
| (((u_long) func ) << 8ul);
break;
case 2:
if (device >= 16) break;
tag.cfg2.port = 0xc000 | (device << 8ul);
tag.cfg2.enable = 0xf1 | (func << 1ul);
tag.cfg2.forward = bus;
break;
};
return tag;
}
static pcici_t
pcibus_ftag (pcici_t tag, u_char func)
{
switch (pci_mechanism) {
case 1:
tag.cfg1 &= ~0x700ul;
tag.cfg1 |= (((u_long) func) << 8ul);
break;
case 2:
tag.cfg2.enable = 0xf1 | (func << 1ul);
break;
};
return tag;
}
/*--------------------------------------------------------------------
**
** Read register from configuration space.
**
**--------------------------------------------------------------------
*/
static u_long
pcibus_read (pcici_t tag, u_long reg)
{
u_long addr, data = 0;
if (!tag.cfg1) return (0xfffffffful);
switch (pci_mechanism) {
case 1:
addr = tag.cfg1 | (reg & 0xfc);
#ifdef PCI_DEBUG
printf ("pci_conf_read(1): addr=%x ", addr);
#endif
outl (CONF1_ADDR_PORT, addr);
data = inl (CONF1_DATA_PORT);
outl (CONF1_ADDR_PORT, 0 );
break;
case 2:
addr = tag.cfg2.port | (reg & 0xfc);
#ifdef PCI_DEBUG
printf ("pci_conf_read(2): addr=%x ", addr);
#endif
outb (CONF2_ENABLE_PORT , tag.cfg2.enable );
outb (CONF2_FORWARD_PORT, tag.cfg2.forward);
data = inl ((u_short) addr);
outb (CONF2_ENABLE_PORT, 0);
outb (CONF2_FORWARD_PORT, 0);
break;
};
#ifdef PCI_DEBUG
printf ("data=%x\n", data);
#endif
return (data);
}
/*--------------------------------------------------------------------
**
** Write register into configuration space.
**
**--------------------------------------------------------------------
*/
static void
pcibus_write (pcici_t tag, u_long reg, u_long data)
{
u_long addr;
if (!tag.cfg1) return;
switch (pci_mechanism) {
case 1:
addr = tag.cfg1 | (reg & 0xfc);
#ifdef PCI_DEBUG
printf ("pci_conf_write(1): addr=%x data=%x\n",
addr, data);
#endif
outl (CONF1_ADDR_PORT, addr);
outl (CONF1_DATA_PORT, data);
outl (CONF1_ADDR_PORT, 0 );
break;
case 2:
addr = tag.cfg2.port | (reg & 0xfc);
#ifdef PCI_DEBUG
printf ("pci_conf_write(2): addr=%x data=%x\n",
addr, data);
#endif
outb (CONF2_ENABLE_PORT, tag.cfg2.enable);
outb (CONF2_FORWARD_PORT, tag.cfg2.forward);
outl ((u_short) addr, data);
outb (CONF2_ENABLE_PORT, 0);
outb (CONF2_FORWARD_PORT, 0);
break;
};
}
/*-----------------------------------------------------------------------
**
** Register an interupt handler for a pci device.
**
**-----------------------------------------------------------------------
*/
static int
pcibus_ihandler_attach (int irq, void(*func)(), int arg, unsigned * maskptr)
{
int result;
result = register_intr(
irq, /* isa irq */
0, /* deviced?? */
0, /* flags? */
(inthand2_t*) func, /* handler */
maskptr, /* mask pointer */
arg); /* handler arg */
if (result) {
printf ("@@@ pcibus_ihandler_attach: result=%d\n", result);
return (result);
};
update_intr_masks();
INTREN ((1ul<<irq));
return (0);
}
static int
pcibus_ihandler_detach (int irq, void(*func)())
{
int result;
INTRDIS ((1ul<<irq));
result = unregister_intr (irq, (inthand2_t*) func);
if (result)
printf ("@@@ pcibus_ihandler_detach: result=%d\n", result);
update_intr_masks();
return (result);
}
static int
pcibus_imask_include (int irq, unsigned* maskptr)
{
unsigned mask;
if (!maskptr) return (0);
mask = 1ul << irq;
if (*maskptr & mask)
return (-1);
INTRMASK (*maskptr, mask);
update_intr_masks();
return (0);
}
static int
pcibus_imask_exclude (int irq, unsigned* maskptr)
{
unsigned mask;
if (!maskptr) return (0);
mask = 1ul << irq;
if (! (*maskptr & mask))
return (-1);
*maskptr &= ~mask;
update_intr_masks();
return (0);
}