d3bbf3ef4d
Choose older MULTIPORT version, because lastest bde version not worked. Don't force HUPCL for bidirectional case. From bde: Use bit (1 << (16 + 4)) in schedsoftcom() to avoid clash with non-serial h/w on IRQ4. Allow FIFO_TRIGGER in config. Clear com->mcr_image when clearing mcr for init of 4port. The usual value MCR_IENABLE should have broken 4ports unless something happened to clear it later. Turn off interrupts as well as DTR after an error waiting for carrier (bidir dialin case). Drain fifo more carefully. Don't hang up if debugging. Rearrange siointr() -> siointr1() for multiport case for speed, lower latency and clarity. Use suser() to check perms. Provide missing splx() after failed perms checks. c_ispeed == 0 means c_ispeed = c_ospeed (POSIX). Set parameters (except speed) for c_ospeed == 0 as well as hanging up. Better initialization for console (fifo stuff...). Misc. cleanups. Fix dead hang if modem power is off.
1819 lines
46 KiB
C
1819 lines
46 KiB
C
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)com.c 7.5 (Berkeley) 5/16/91
|
|
* $Id: sio.c,v 1.21 1994/01/02 10:17:29 ache Exp $
|
|
*/
|
|
|
|
#include "sio.h"
|
|
#if NSIO > 0
|
|
/*
|
|
* Serial driver, based on 386BSD-0.1 com driver.
|
|
* Mostly rewritten to use pseudo-DMA.
|
|
* Works for National Semiconductor NS8250-NS16550AF UARTs.
|
|
* COM driver, based on HP dca driver.
|
|
*/
|
|
#include "param.h"
|
|
#include "systm.h"
|
|
#include "ioctl.h"
|
|
#include "tty.h"
|
|
#include "proc.h"
|
|
#include "user.h"
|
|
#include "conf.h"
|
|
#include "file.h"
|
|
#include "uio.h"
|
|
#include "kernel.h"
|
|
#include "syslog.h"
|
|
|
|
#include "i386/isa/isa.h"
|
|
#include "i386/isa/isa_device.h"
|
|
#include "i386/isa/comreg.h"
|
|
#include "i386/isa/ic/ns16550.h"
|
|
|
|
#define FAKE_DCD(unit) ((unit) == comconsole)
|
|
#define LOTS_OF_EVENTS 64 /* helps separate urgent events from input */
|
|
#define RB_I_HIGH_WATER (RBSZ - 2 * RS_IBUFSIZE)
|
|
#define RB_I_LOW_WATER ((RBSZ - 2 * RS_IBUFSIZE) * 7 / 8)
|
|
#define RS_IBUFSIZE 256
|
|
#define TTY_BI TTY_FE /* XXX */
|
|
#define TTY_OE TTY_PE /* XXX */
|
|
|
|
#ifndef COM_BIDIR
|
|
#define UNIT(x) (minor(x)) /* XXX */
|
|
#else /* COM_BIDIR */
|
|
#define COM_UNITMASK 0x7f
|
|
#define COM_CALLOUTMASK 0x80
|
|
#define UNIT(x) (minor(x) & COM_UNITMASK)
|
|
#define CALLOUT(x) (minor(x) & COM_CALLOUTMASK)
|
|
#endif /* COM_BIDIR */
|
|
|
|
#ifdef COM_MULTIPORT
|
|
/* checks in flags for multiport and which is multiport "master chip"
|
|
* for a given card
|
|
*/
|
|
#define COM_ISMULTIPORT(dev) ((dev)->id_flags & 0x01)
|
|
#define COM_MPMASTER(dev) (((dev)->id_flags >> 8) & 0x0ff)
|
|
#endif /* COM_MULTIPORT */
|
|
|
|
#ifndef FIFO_TRIGGER
|
|
/*
|
|
* This driver is fast enough to work with any value and for high values
|
|
* to be only slightly more efficient. Low values may be better because
|
|
* they give lower latency.
|
|
* TODO: always use low values for low speeds. Mouse movements are jerky
|
|
* if more than one packet arrives at once. The low speeds used for
|
|
* serial mice help avoid this, but not if (large) fifos are enabled.
|
|
*/
|
|
#define FIFO_TRIGGER FIFO_TRIGGER_14
|
|
#endif
|
|
|
|
#define com_scr 7 /* scratch register for 16450-16550 (R/W) */
|
|
#define schedsoftcom() (ipending |= 1 << (16 + 4)) /* XXX */
|
|
|
|
/*
|
|
* Input buffer watermarks.
|
|
* The external device is asked to stop sending when the buffer exactly reaches
|
|
* high water, or when the high level requests it.
|
|
* The high level is notified immediately (rather than at a later clock tick)
|
|
* when this watermark is reached.
|
|
* The buffer size is chosen so the watermark should almost never be reached.
|
|
* The low watermark is invisibly 0 since the buffer is always emptied all at
|
|
* once.
|
|
*/
|
|
#define RS_IHIGHWATER (3 * RS_IBUFSIZE / 4)
|
|
|
|
/*
|
|
* com state bits.
|
|
* (CS_BUSY | CS_TTGO) and (CS_BUSY | CS_TTGO | CS_ODEVREADY) must be higher
|
|
* than the other bits so that they can be tested as a group without masking
|
|
* off the low bits.
|
|
*
|
|
* The following com and tty flags correspond closely:
|
|
* TS_BUSY = CS_BUSY (maintained by comstart() and comflush())
|
|
* CS_TTGO = ~TS_TTSTOP (maintained by comstart() and siostop())
|
|
* CS_CTS_OFLOW = CCTS_OFLOW (maintained by comparam())
|
|
* CS_RTS_IFLOW = CRTS_IFLOW (maintained by comparam())
|
|
* TS_FLUSH is not used.
|
|
* Bug: I think TIOCSETA doesn't clear TS_TTSTOP when it clears IXON.
|
|
*/
|
|
#define CS_BUSY 0x80 /* output in progress */
|
|
#define CS_TTGO 0x40 /* output not stopped by XOFF */
|
|
#define CS_ODEVREADY 0x20 /* external device h/w ready (CTS) */
|
|
#define CS_CHECKMSR 1 /* check of MSR scheduled */
|
|
#define CS_CTS_OFLOW 2 /* use CTS output flow control */
|
|
#define CS_ODONE 4 /* output completed */
|
|
#define CS_RTS_IFLOW 8 /* use RTS input flow control */
|
|
|
|
static char *error_desc[] = {
|
|
#define CE_OVERRUN 0
|
|
"silo overflow",
|
|
#define CE_INTERRUPT_BUF_OVERFLOW 1
|
|
"interrupt-level buffer overflow",
|
|
#define CE_TTY_BUF_OVERFLOW 2
|
|
"tty-level buffer overflow",
|
|
};
|
|
|
|
#define CE_NTYPES 3
|
|
#define CE_RECORD(com, errnum) (++(com)->delta_error_counts[errnum])
|
|
|
|
/* types. XXX - should be elsewhere */
|
|
typedef u_int Port_t; /* hardware port */
|
|
typedef int Bool_t; /* promoted boolean */
|
|
typedef u_char bool_t; /* boolean */
|
|
|
|
/* com device structure */
|
|
struct com_s {
|
|
u_char state; /* miscellaneous flag bits */
|
|
u_char cfcr_image; /* copy of value written to CFCR */
|
|
bool_t hasfifo; /* nonzero for 16550 UARTs */
|
|
u_char mcr_image; /* copy of value written to MCR */
|
|
#ifdef COM_BIDIR
|
|
bool_t bidir; /* is this unit bidirectional? */
|
|
bool_t active; /* is the port active _at all_? */
|
|
bool_t active_in; /* is the incoming port in use? */
|
|
bool_t active_out; /* is the outgoing port in use? */
|
|
#endif /* COM_BIDIR */
|
|
#ifdef COM_MULTIPORT
|
|
bool_t multiport; /* is this unit part of a multiport device? */
|
|
#endif /* COM_MULTIPORT */
|
|
int dtr_wait; /* time to hold DTR down on close (* 1/HZ) */
|
|
|
|
/*
|
|
* The high level of the driver never reads status registers directly
|
|
* because there would be too many side effects to handle conveniently.
|
|
* Instead, it reads copies of the registers stored here by the
|
|
* interrupt handler.
|
|
*/
|
|
u_char last_modem_status; /* last MSR read by intr handler */
|
|
u_char prev_modem_status; /* last MSR handled by high level */
|
|
|
|
u_char *ibuf; /* start of input buffer */
|
|
u_char *ibufend; /* end of input buffer */
|
|
u_char *ihighwater; /* threshold in input buffer */
|
|
u_char *iptr; /* next free spot in input buffer */
|
|
|
|
u_char *obufend; /* end of output buffer */
|
|
int ocount; /* original count for current output */
|
|
u_char *optr; /* next char to output */
|
|
|
|
Port_t data_port; /* i/o ports */
|
|
Port_t int_id_port;
|
|
Port_t iobase;
|
|
Port_t modem_ctl_port;
|
|
Port_t line_status_port;
|
|
Port_t modem_status_port;
|
|
|
|
struct tty *tp; /* cross reference */
|
|
|
|
u_long bytes_in; /* statistics */
|
|
u_long bytes_out;
|
|
u_int delta_error_counts[CE_NTYPES];
|
|
u_int error_counts[CE_NTYPES];
|
|
|
|
/*
|
|
* Ping-pong input buffers. The extra factor of 2 in the sizes is
|
|
* to allow for an error byte for each input byte.
|
|
*/
|
|
#define CE_INPUT_OFFSET RS_IBUFSIZE
|
|
u_char ibuf1[2 * RS_IBUFSIZE];
|
|
u_char ibuf2[2 * RS_IBUFSIZE];
|
|
};
|
|
|
|
/*
|
|
* These functions in the com module ought to be declared (with a prototype)
|
|
* in a com-driver system header. The void ones may need to be int to match
|
|
* ancient devswitch declarations, but they don't actually return anything.
|
|
*/
|
|
#define Dev_t int /* promoted dev_t */
|
|
struct consdev;
|
|
|
|
int sioclose __P((Dev_t dev, int fflag, int devtype,
|
|
struct proc *p));
|
|
void siointr __P((int unit));
|
|
int sioioctl __P((Dev_t dev, int cmd, caddr_t data,
|
|
int fflag, struct proc *p));
|
|
int siocngetc __P((Dev_t dev));
|
|
void siocninit __P((struct consdev *cp));
|
|
void siocnprobe __P((struct consdev *cp));
|
|
void siocnputc __P((Dev_t dev, int c));
|
|
int sioopen __P((Dev_t dev, int oflags, int devtype,
|
|
struct proc *p));
|
|
int sioread __P((Dev_t dev, struct uio *uio, int ioflag));
|
|
int sioselect __P((Dev_t dev, int rw, struct proc *p));
|
|
void siostop __P((struct tty *tp, int rw));
|
|
int siowrite __P((Dev_t dev, struct uio *uio, int ioflag));
|
|
void softsio1 __P((void));
|
|
|
|
static int sioattach __P((struct isa_device *dev));
|
|
static void comflush __P((struct com_s *com));
|
|
static void comhardclose __P((struct com_s *com));
|
|
static void cominit __P((int unit, int rate));
|
|
#ifdef COM_MULTIPORT
|
|
static bool_t comintr1 __P((struct com_s *com));
|
|
#endif /* COM_MULTIPORT */
|
|
static void commctl __P((struct com_s *com, int bits, int how));
|
|
static int comparam __P((struct tty *tp, struct termios *t));
|
|
static int sioprobe __P((struct isa_device *dev));
|
|
static void compoll __P((void));
|
|
static void comstart __P((struct tty *tp));
|
|
static void comwakeup __P((caddr_t chan, int ticks));
|
|
static int tiocm_xxx2mcr __P((int tiocm_xxx));
|
|
|
|
/* table and macro for fast conversion from a unit number to its com struct */
|
|
static struct com_s *p_com_addr[NSIO];
|
|
#define com_addr(unit) (p_com_addr[unit])
|
|
|
|
static struct com_s com_structs[NSIO];
|
|
|
|
struct isa_driver siodriver = {
|
|
sioprobe, sioattach, "sio"
|
|
};
|
|
|
|
#ifdef COMCONSOLE
|
|
static int comconsole = COMCONSOLE;
|
|
#else
|
|
static int comconsole = -1;
|
|
#endif
|
|
static bool_t comconsinit;
|
|
static speed_t comdefaultrate = TTYDEF_SPEED;
|
|
static u_int com_events; /* input chars + weighted output completions */
|
|
static int commajor;
|
|
struct tty sio_tty[NSIO];
|
|
extern struct tty *constty;
|
|
extern u_int ipending; /* XXX */
|
|
extern int tk_nin; /* XXX */
|
|
extern int tk_rawcc; /* XXX */
|
|
|
|
#ifdef KGDB
|
|
#include "machine/remote-sl.h"
|
|
|
|
extern int kgdb_dev;
|
|
extern int kgdb_rate;
|
|
extern int kgdb_debug_init;
|
|
#endif
|
|
|
|
static struct speedtab comspeedtab[] = {
|
|
0, 0,
|
|
50, COMBRD(50),
|
|
75, COMBRD(75),
|
|
110, COMBRD(110),
|
|
134, COMBRD(134),
|
|
150, COMBRD(150),
|
|
200, COMBRD(200),
|
|
300, COMBRD(300),
|
|
600, COMBRD(600),
|
|
1200, COMBRD(1200),
|
|
1800, COMBRD(1800),
|
|
2400, COMBRD(2400),
|
|
4800, COMBRD(4800),
|
|
9600, COMBRD(9600),
|
|
19200, COMBRD(19200),
|
|
38400, COMBRD(38400),
|
|
57600, COMBRD(57600),
|
|
115200, COMBRD(115200),
|
|
-1, -1
|
|
};
|
|
|
|
/* XXX - configure this list */
|
|
static Port_t likely_com_ports[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, };
|
|
|
|
static int
|
|
sioprobe(dev)
|
|
struct isa_device *dev;
|
|
{
|
|
static bool_t already_init;
|
|
Port_t *com_ptr;
|
|
Port_t iobase;
|
|
int result;
|
|
|
|
if (!already_init) {
|
|
/*
|
|
* Turn off MCR_IENABLE for all likely serial ports. An unused
|
|
* port with its MCR_IENABLE gate open will inhibit interrupts
|
|
* from any used port that shares the interrupt vector.
|
|
*/
|
|
for (com_ptr = likely_com_ports;
|
|
com_ptr < &likely_com_ports[sizeof likely_com_ports
|
|
/ sizeof likely_com_ports[0]];
|
|
++com_ptr)
|
|
outb(*com_ptr + com_mcr, 0);
|
|
already_init = TRUE;
|
|
}
|
|
iobase = dev->id_iobase;
|
|
result = IO_COMSIZE;
|
|
|
|
/*
|
|
* We don't want to get actual interrupts, just masked ones.
|
|
* Interrupts from this line should already be masked in the ICU,
|
|
* but mask them in the processor as well in case there are some
|
|
* (misconfigured) shared interrupts.
|
|
*/
|
|
disable_intr();
|
|
|
|
/*
|
|
* Initialize the speed so that any junk in the THR or output fifo will
|
|
* be transmitted in a known time. (There may be lots of junk after a
|
|
* soft reboot, and output interrupts don't work right after a master
|
|
* reset, at least for 16550s. (The speed is undefined after MR, but
|
|
* MR empties the THR and the TSR so it's not clear why this matters)).
|
|
* Enable output interrupts (only) and check the following:
|
|
* o the CFCR, IER and MCR in UART hold the values written to them
|
|
* (the values happen to be all distinct - this is good for
|
|
* avoiding false positive tests from bus echoes).
|
|
* o an output interrupt is generated and its vector is correct.
|
|
* o the interrupt goes away when the IIR in the UART is read.
|
|
*/
|
|
outb(iobase + com_cfcr, CFCR_DLAB);
|
|
outb(iobase + com_dlbl, COMBRD(9600) & 0xff);
|
|
outb(iobase + com_dlbh, (u_int) COMBRD(9600) >> 8);
|
|
outb(iobase + com_cfcr, CFCR_8BITS); /* ensure IER is addressed */
|
|
outb(iobase + com_mcr, MCR_IENABLE); /* open gate early */
|
|
outb(iobase + com_ier, 0); /* ensure edge on next intr */
|
|
outb(iobase + com_ier, IER_ETXRDY); /* generate interrupt */
|
|
DELAY((16 + 1) * 9600 / 10); /* enough to drain 16 bytes */
|
|
if ( inb(iobase + com_cfcr) != CFCR_8BITS
|
|
|| inb(iobase + com_ier) != IER_ETXRDY
|
|
|| inb(iobase + com_mcr) != MCR_IENABLE
|
|
#ifndef COM_MULTIPORT /* XXX - need to do more to enable interrupts */
|
|
|| !isa_irq_pending(dev)
|
|
#endif
|
|
|| (inb(iobase + com_iir) & IIR_IMASK) != IIR_TXRDY
|
|
|| isa_irq_pending(dev)
|
|
|| (inb(iobase + com_iir) & IIR_IMASK) != IIR_NOPEND)
|
|
result = 0;
|
|
|
|
/*
|
|
* Turn off all device interrupts and check that they go off properly.
|
|
* Leave MCR_IENABLE set. It gates the OUT2 output of the UART to
|
|
* the ICU input. Closing the gate would give a floating ICU input
|
|
* (unless there is another device driving at) and spurious interrupts.
|
|
* (On the system that this was first tested on, the input floats high
|
|
* and gives a (masked) interrupt as soon as the gate is closed.)
|
|
*/
|
|
outb(iobase + com_ier, 0);
|
|
outb(iobase + com_mcr, MCR_IENABLE); /* dummy to avoid bus echo */
|
|
if ( inb(iobase + com_ier) != 0
|
|
|| isa_irq_pending(dev)
|
|
|| (inb(iobase + com_iir) & IIR_IMASK) != IIR_NOPEND)
|
|
result = 0;
|
|
|
|
enable_intr();
|
|
return (result);
|
|
}
|
|
|
|
static int /* XXX - should be void */
|
|
sioattach(isdp)
|
|
struct isa_device *isdp;
|
|
{
|
|
struct com_s *com;
|
|
static bool_t comwakeup_started = FALSE;
|
|
Port_t iobase;
|
|
int s;
|
|
int unit;
|
|
|
|
iobase = isdp->id_iobase;
|
|
unit = isdp->id_unit;
|
|
if (unit == comconsole)
|
|
DELAY(1000); /* XXX */
|
|
s = spltty();
|
|
|
|
/*
|
|
* sioprobe() has initialized the device registers as follows:
|
|
* o cfcr = CFCR_8BITS.
|
|
* It is most important that CFCR_DLAB is off, so that the
|
|
* data port is not hidden when we enable interrupts.
|
|
* o ier = 0.
|
|
* Interrupts are only enabled when the line is open.
|
|
* o mcr = MCR_IENABLE.
|
|
* Keeping MCR_DTR and MCR_RTS off might stop the external
|
|
* device from sending before we are ready.
|
|
*/
|
|
|
|
com = &com_structs[unit];
|
|
com->cfcr_image = CFCR_8BITS;
|
|
com->mcr_image = MCR_IENABLE;
|
|
com->dtr_wait = 200;
|
|
com->iptr = com->ibuf = com->ibuf1;
|
|
com->ibufend = com->ibuf1 + RS_IBUFSIZE;
|
|
com->ihighwater = com->ibuf1 + RS_IHIGHWATER;
|
|
com->iobase = iobase;
|
|
com->data_port = iobase + com_data;
|
|
com->int_id_port = iobase + com_iir;
|
|
com->modem_ctl_port = iobase + com_mcr;
|
|
com->line_status_port = iobase + com_lsr;
|
|
com->modem_status_port = iobase + com_msr;
|
|
com->tp = &sio_tty[unit];
|
|
#ifdef COM_BIDIR
|
|
/*
|
|
* if bidirectional ports possible, clear the bidir port info;
|
|
*/
|
|
com->bidir = FALSE;
|
|
com->active = FALSE;
|
|
com->active_in = com->active_out = FALSE;
|
|
#endif /* COM_BIDIR */
|
|
|
|
/* attempt to determine UART type */
|
|
printf("sio%d: type", unit);
|
|
#ifdef COM_MULTIPORT
|
|
if (!COM_ISMULTIPORT(isdp))
|
|
#endif
|
|
{
|
|
u_char scr;
|
|
u_char scr1;
|
|
u_char scr2;
|
|
|
|
scr = inb(iobase + com_scr);
|
|
outb(iobase + com_scr, 0xa5);
|
|
scr1 = inb(iobase + com_scr);
|
|
outb(iobase + com_scr, 0x5a);
|
|
scr2 = inb(iobase + com_scr);
|
|
outb(iobase + com_scr, scr);
|
|
if (scr1 != 0xa5 || scr2 != 0x5a) {
|
|
printf(" 8250");
|
|
goto determined_type;
|
|
}
|
|
}
|
|
outb(iobase + com_fifo, FIFO_ENABLE | FIFO_TRIGGER_14);
|
|
DELAY(100);
|
|
switch (inb(com->int_id_port) & IIR_FIFO_MASK) {
|
|
case FIFO_TRIGGER_1:
|
|
printf(" 16450");
|
|
break;
|
|
case FIFO_TRIGGER_4:
|
|
printf(" 16450?");
|
|
break;
|
|
case FIFO_TRIGGER_8:
|
|
printf(" 16550?");
|
|
break;
|
|
case FIFO_TRIGGER_14:
|
|
com->hasfifo = TRUE;
|
|
printf(" 16550A");
|
|
break;
|
|
}
|
|
outb(iobase + com_fifo, 0);
|
|
determined_type: ;
|
|
|
|
#ifdef COM_MULTIPORT
|
|
if (COM_ISMULTIPORT(isdp)) {
|
|
struct isa_device *masterdev;
|
|
|
|
com->multiport = TRUE;
|
|
printf(" (multiport)");
|
|
|
|
/* set the master's common-interrupt-enable reg.,
|
|
* as appropriate. YYY See your manual
|
|
*/
|
|
/* enable only common interrupt for port */
|
|
outb(com->modem_ctl_port, com->mcr_image = 0);
|
|
|
|
masterdev = find_isadev(isa_devtab_tty, &siodriver,
|
|
COM_MPMASTER(isdp));
|
|
outb(masterdev->id_iobase + com_scr, 0x80);
|
|
}
|
|
else
|
|
com->multiport = FALSE;
|
|
#endif /* COM_MULTIPORT */
|
|
printf("\n");
|
|
|
|
#ifdef KGDB
|
|
if (kgdb_dev == makedev(commajor, unit)) {
|
|
if (comconsole == unit)
|
|
kgdb_dev = -1; /* can't debug over console port */
|
|
else {
|
|
cominit(unit, kgdb_rate);
|
|
if (kgdb_debug_init) {
|
|
/*
|
|
* Print prefix of device name,
|
|
* let kgdb_connect print the rest.
|
|
*/
|
|
printf("sio%d: ", unit);
|
|
kgdb_connect(1);
|
|
}
|
|
else
|
|
printf("sio%d: kgdb enabled\n", unit);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Need to reset baud rate, etc. of next print so reset comconsinit.
|
|
*/
|
|
if (unit == comconsole)
|
|
comconsinit = FALSE;
|
|
|
|
com_addr(unit) = com;
|
|
splx(s);
|
|
if (!comwakeup_started) {
|
|
comwakeup((caddr_t) NULL, 0);
|
|
comwakeup_started = TRUE;
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
int
|
|
sioopen(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
#ifdef COM_BIDIR
|
|
bool_t callout;
|
|
#endif /* COM_BIDIR */
|
|
struct com_s *com;
|
|
int error = 0;
|
|
Port_t iobase;
|
|
int s;
|
|
struct tty *tp;
|
|
int unit;
|
|
|
|
unit = UNIT(dev);
|
|
if ((u_int) unit >= NSIO || (com = com_addr(unit)) == NULL)
|
|
return (ENXIO);
|
|
#ifdef COM_BIDIR
|
|
/* if it's a callout device, and bidir not possible on that dev, die */
|
|
callout = CALLOUT(dev);
|
|
if (callout && !(com->bidir))
|
|
return (ENXIO);
|
|
#endif /* COM_BIDIR */
|
|
|
|
tp = com->tp;
|
|
s = spltty();
|
|
|
|
#ifdef COM_BIDIR
|
|
|
|
bidir_open_top:
|
|
/* if it's bidirectional, we've gotta deal with it... */
|
|
if (com->bidir) {
|
|
if (callout) {
|
|
if (com->active_in) {
|
|
/* it's busy. die */
|
|
splx(s);
|
|
return (EBUSY);
|
|
} else {
|
|
/* it's ours. lock it down, and set it up */
|
|
com->active_out = TRUE;
|
|
}
|
|
} else {
|
|
if (com->active_out) {
|
|
/* it's busy, outgoing. wait, if possible */
|
|
if (flag & O_NONBLOCK) {
|
|
/* can't wait; bail */
|
|
splx(s);
|
|
return (EBUSY);
|
|
} else {
|
|
/* wait for it... */
|
|
error = tsleep((caddr_t)&com->active_out,
|
|
TTIPRI|PCATCH,
|
|
"siooth",
|
|
0);
|
|
/* if there was an error, take off. */
|
|
if (error != 0) {
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
/* else take it from the top */
|
|
goto bidir_open_top;
|
|
}
|
|
} else if (com->prev_modem_status & MSR_DCD
|
|
|| FAKE_DCD(unit)) {
|
|
/* there's a carrier on the line; we win */
|
|
com->active_in = TRUE;
|
|
} else {
|
|
/* there is no carrier on the line */
|
|
if (flag & O_NONBLOCK) {
|
|
/* can't wait; let it open */
|
|
com->active_in = TRUE;
|
|
} else {
|
|
/* put DTR & RTS up */
|
|
/* XXX - bring up RTS earlier? */
|
|
commctl(com, MCR_DTR | MCR_RTS, DMSET);
|
|
outb(com->iobase + com_ier, IER_EMSC);
|
|
|
|
/* wait for it... */
|
|
error = tsleep((caddr_t)&com->active_in,
|
|
TTIPRI|PCATCH,
|
|
"siodcd",
|
|
0);
|
|
|
|
/* if not active, turn intrs and DTR off */
|
|
if (!com->active) {
|
|
outb(com->iobase + com_ier, 0);
|
|
commctl(com, MCR_DTR, DMBIC);
|
|
}
|
|
|
|
/* if there was an error, take off. */
|
|
if (error != 0) {
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
/* else take it from the top */
|
|
goto bidir_open_top;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
com->active = TRUE;
|
|
#endif /* COM_BIDIR */
|
|
|
|
tp->t_oproc = comstart;
|
|
tp->t_param = comparam;
|
|
tp->t_dev = dev;
|
|
if (!(tp->t_state & TS_ISOPEN)) {
|
|
tp->t_state |= TS_WOPEN;
|
|
ttychars(tp);
|
|
if (tp->t_ispeed == 0) {
|
|
/*
|
|
* We no longer use the flags from <sys/ttydefaults.h>
|
|
* since those are only relevant for logins. It's
|
|
* important to have echo off initially so that the
|
|
* line doesn't start blathering before the echo flag
|
|
* can be turned off.
|
|
*/
|
|
tp->t_iflag = 0;
|
|
#ifdef COMCONSOLE
|
|
tp->t_oflag = TTYDEF_OFLAG;
|
|
#else
|
|
tp->t_oflag = 0;
|
|
#endif
|
|
tp->t_cflag = CREAD | CS8 | HUPCL;
|
|
tp->t_lflag = 0;
|
|
tp->t_ispeed = tp->t_ospeed = comdefaultrate;
|
|
}
|
|
|
|
/*
|
|
* XXX the full state after a first open() needs to be
|
|
* programmable and separate for callin and callout.
|
|
*/
|
|
#ifdef COM_BIDIR
|
|
if (com->bidir) {
|
|
if (callout)
|
|
tp->t_cflag |= CLOCAL;
|
|
else
|
|
tp->t_cflag &= ~CLOCAL;
|
|
}
|
|
#endif
|
|
|
|
commctl(com, MCR_DTR | MCR_RTS, DMSET);
|
|
error = comparam(tp, &tp->t_termios);
|
|
if (error != 0)
|
|
goto out;
|
|
ttsetwater(tp);
|
|
|
|
/*
|
|
* XXX temporary fix for deadlock in ttywait().
|
|
*
|
|
* If two processes wait for output to drain from the same
|
|
* tty, and the amount of output to drain is > 0 and
|
|
* <= tp->t_lowat, then the processes will take turns
|
|
* uselessly waking each other up until the output drains,
|
|
* with cpl higher than spltty() throughout.
|
|
*
|
|
* The sleep address and TS_ASLEEP flag ought to be different
|
|
* for the different events (output done) and (output almost
|
|
* done).
|
|
*/
|
|
tp->t_lowat = 0;
|
|
|
|
iobase = com->iobase;
|
|
if (com->hasfifo) {
|
|
/* (re)enable and drain FIFO */
|
|
outb(iobase + com_fifo, FIFO_ENABLE | FIFO_TRIGGER
|
|
| FIFO_RCV_RST | FIFO_XMT_RST);
|
|
DELAY(100);
|
|
}
|
|
disable_intr();
|
|
(void) inb(com->line_status_port);
|
|
(void) inb(com->data_port);
|
|
com->last_modem_status =
|
|
com->prev_modem_status = inb(com->modem_status_port);
|
|
outb(iobase + com_ier, IER_ERXRDY | IER_ETXRDY | IER_ERLS
|
|
| IER_EMSC);
|
|
enable_intr();
|
|
if (com->prev_modem_status & MSR_DCD || FAKE_DCD(unit))
|
|
tp->t_state |= TS_CARR_ON;
|
|
}
|
|
else if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) {
|
|
splx(s);
|
|
return (EBUSY);
|
|
}
|
|
while (!(flag & O_NONBLOCK) && !(tp->t_cflag & CLOCAL)
|
|
#ifdef COM_BIDIR
|
|
/* We went through a lot of trouble to open it,
|
|
* but it's certain we have a carrier now, so
|
|
* don't spend any time on it now.
|
|
*/
|
|
&& !(com->bidir)
|
|
#endif /* COM_BIDIR */
|
|
&& !(tp->t_state & TS_CARR_ON)) {
|
|
tp->t_state |= TS_WOPEN;
|
|
error = ttysleep(tp, (caddr_t)&tp->t_raw, TTIPRI | PCATCH,
|
|
ttopen, 0);
|
|
if (error != 0)
|
|
break;
|
|
}
|
|
out:
|
|
splx(s);
|
|
if (error == 0)
|
|
error = (*linesw[tp->t_line].l_open)(dev, tp, 0);
|
|
|
|
#ifdef COM_BIDIR
|
|
/* wakeup sleepers */
|
|
wakeup((caddr_t) &com->active_in);
|
|
#endif /* COM_BIDIR */
|
|
|
|
/*
|
|
* XXX - the next step was once not done, so interrupts, DTR and RTS
|
|
* remained hot if the process was killed while it was sleeping
|
|
* waiting for carrier. Now there is the opposite problem. If several
|
|
* processes are sleeping waiting for carrier on the same line and one
|
|
* is killed, interrupts are turned off so the other processes will
|
|
* never see the carrier rise.
|
|
*/
|
|
if (error != 0 && !(tp->t_state & TS_ISOPEN))
|
|
comhardclose(com);
|
|
tp->t_state &= ~TS_WOPEN;
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*ARGSUSED*/
|
|
int
|
|
sioclose(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
struct com_s *com;
|
|
struct tty *tp;
|
|
|
|
com = com_addr(UNIT(dev));
|
|
tp = com->tp;
|
|
(*linesw[tp->t_line].l_close)(tp, flag);
|
|
comhardclose(com);
|
|
ttyclose(tp);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
comhardclose(com)
|
|
struct com_s *com;
|
|
{
|
|
Port_t iobase;
|
|
int s;
|
|
struct tty *tp;
|
|
|
|
s = spltty();
|
|
iobase = com->iobase;
|
|
outb(iobase + com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
|
|
#ifdef KGDB
|
|
/* do not disable interrupts or hang up if debugging */
|
|
if (kgdb_dev != makedev(commajor, com - &com_structs[0]))
|
|
#endif
|
|
{
|
|
outb(iobase + com_ier, 0);
|
|
tp = com->tp;
|
|
if (tp->t_cflag & HUPCL || tp->t_state & TS_WOPEN
|
|
|| !(tp->t_state & TS_ISOPEN)) {
|
|
commctl(com, MCR_RTS, DMSET);
|
|
if (com->dtr_wait != 0)
|
|
/*
|
|
* Uninterruptible sleep since we want to
|
|
* wait a fixed time.
|
|
* XXX - delay in open() (if necessary),
|
|
* not here (always).
|
|
*/
|
|
tsleep((caddr_t)&com->dtr_wait, TTIPRI,
|
|
"sioclose", com->dtr_wait);
|
|
}
|
|
}
|
|
|
|
#ifdef COM_BIDIR
|
|
com->active = com->active_in = com->active_out = FALSE;
|
|
|
|
/* wakeup sleepers who are waiting for out to finish */
|
|
wakeup((caddr_t) &com->active_out);
|
|
#endif /* COM_BIDIR */
|
|
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
sioread(dev, uio, flag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
struct tty *tp = com_addr(UNIT(dev))->tp;
|
|
|
|
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
|
|
}
|
|
|
|
int
|
|
siowrite(dev, uio, flag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
int unit = UNIT(dev);
|
|
struct tty *tp = com_addr(unit)->tp;
|
|
|
|
/*
|
|
* (XXX) We disallow virtual consoles if the physical console is
|
|
* a serial port. This is in case there is a display attached that
|
|
* is not the console. In that situation we don't need/want the X
|
|
* server taking over the console.
|
|
*/
|
|
if (constty && unit == comconsole)
|
|
constty = NULL;
|
|
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
|
|
}
|
|
|
|
void
|
|
siointr(unit)
|
|
int unit;
|
|
{
|
|
struct com_s *com;
|
|
#ifndef COM_MULTIPORT
|
|
u_char line_status;
|
|
u_char modem_status;
|
|
u_char *ioptr;
|
|
u_char recv_data;
|
|
|
|
com = com_addr(unit);
|
|
#else /* COM_MULTIPORT */
|
|
bool_t possibly_more_intrs;
|
|
|
|
/*
|
|
* Loop until there is no activity on any port. This is necessary
|
|
* to get an interrupt edge more than to avoid another interrupt.
|
|
* If the IRQ signal is just an OR of the IRQ signals from several
|
|
* devices, then the edge from one may be lost because another is
|
|
* on.
|
|
*
|
|
* XXX getting the status from comintr1() is not best and may be
|
|
* incorrect. It would be better to test the int_id's in a tight
|
|
* loop. If each is off when it is tested, then they all must
|
|
* have been off at the start.
|
|
*/
|
|
do {
|
|
possibly_more_intrs = FALSE;
|
|
for (unit = 0; unit < NSIO; ++unit) {
|
|
com = com_addr(unit);
|
|
if (com != NULL) {
|
|
/*
|
|
* XXX call comintr1() instead of here from
|
|
* comwakeup(). The interrupt edge problem
|
|
* only exists for real interrupts.
|
|
*/
|
|
possibly_more_intrs |= comintr1(com);
|
|
}
|
|
}
|
|
} while (possibly_more_intrs);
|
|
return;
|
|
}
|
|
|
|
static bool_t
|
|
comintr1(com)
|
|
struct com_s *com;
|
|
{
|
|
u_char line_status;
|
|
u_char modem_status;
|
|
u_char *ioptr;
|
|
u_char recv_data;
|
|
bool_t donesomething;
|
|
|
|
donesomething = FALSE;
|
|
#endif /* COM_MULTIPORT */
|
|
|
|
while (TRUE) {
|
|
line_status = inb(com->line_status_port);
|
|
|
|
/* input event? (check first to help avoid overruns) */
|
|
while (line_status & LSR_RCV_MASK) {
|
|
/* break/unnattached error bits or real input? */
|
|
#ifdef COM_MULTIPORT
|
|
donesomething = TRUE;
|
|
#endif /* COM_MULTIPORT */
|
|
if (!(line_status & LSR_RXRDY))
|
|
recv_data = 0;
|
|
else
|
|
recv_data = inb(com->data_port);
|
|
++com->bytes_in;
|
|
#ifdef KGDB
|
|
/* trap into kgdb? (XXX - needs testing and optim) */
|
|
if (recv_data == FRAME_END
|
|
&& !(com->tp->t_state & TS_ISOPEN)
|
|
&& kgdb_dev == makedev(commajor, unit)) {
|
|
kgdb_connect(0);
|
|
continue;
|
|
}
|
|
#endif /* KGDB */
|
|
ioptr = com->iptr;
|
|
if (ioptr >= com->ibufend)
|
|
CE_RECORD(com, CE_INTERRUPT_BUF_OVERFLOW);
|
|
else {
|
|
++com_events;
|
|
#if 0
|
|
if (com->iptr - com->ibuf == 8)
|
|
schedsoftcom();
|
|
#endif
|
|
ioptr[0] = recv_data;
|
|
ioptr[CE_INPUT_OFFSET] = line_status;
|
|
com->iptr = ++ioptr;
|
|
if (ioptr == com->ihighwater
|
|
&& com->state & CS_RTS_IFLOW)
|
|
outb(com->modem_ctl_port,
|
|
com->mcr_image &= ~MCR_RTS);
|
|
/* XXX - move this out of isr */
|
|
if (line_status & LSR_OE)
|
|
CE_RECORD(com, CE_OVERRUN);
|
|
}
|
|
|
|
/*
|
|
* "& 0x7F" is to avoid the gcc-1.40 generating a slow
|
|
* jump from the top of the loop to here
|
|
*/
|
|
line_status = inb(com->line_status_port) & 0x7F;
|
|
}
|
|
|
|
/* modem status change? (always check before doing output) */
|
|
modem_status = inb(com->modem_status_port);
|
|
if (modem_status != com->last_modem_status) {
|
|
/*
|
|
* Schedule high level to handle DCD changes. Note
|
|
* that we don't use the delta bits anywhere. Some
|
|
* UARTs mess them up, and it's easy to remember the
|
|
* previous bits and calculate the delta.
|
|
*/
|
|
#ifdef COM_MULTIPORT
|
|
donesomething = TRUE;
|
|
#endif /* COM_MULTIPORT */
|
|
com->last_modem_status = modem_status;
|
|
if (!(com->state & CS_CHECKMSR)) {
|
|
com_events += LOTS_OF_EVENTS;
|
|
com->state |= CS_CHECKMSR;
|
|
schedsoftcom();
|
|
}
|
|
|
|
/* handle CTS change immediately for crisp flow ctl */
|
|
if (com->state & CS_CTS_OFLOW) {
|
|
if (modem_status & MSR_CTS)
|
|
com->state |= CS_ODEVREADY;
|
|
else
|
|
com->state &= ~CS_ODEVREADY;
|
|
}
|
|
}
|
|
|
|
/* output queued and everything ready? */
|
|
if (line_status & LSR_TXRDY
|
|
&& com->state >= (CS_ODEVREADY | CS_BUSY | CS_TTGO)) {
|
|
#ifdef COM_MULTIPORT
|
|
donesomething = TRUE;
|
|
#endif /* COM_MULTIPORT */
|
|
ioptr = com->optr;
|
|
outb(com->data_port, *ioptr);
|
|
++com->bytes_out;
|
|
com->optr = ++ioptr;
|
|
if (ioptr >= com->obufend) {
|
|
/* output just completed */
|
|
com_events += LOTS_OF_EVENTS;
|
|
com->state ^= (CS_ODONE | CS_BUSY);
|
|
schedsoftcom(); /* handle at high level ASAP */
|
|
}
|
|
}
|
|
|
|
/* finished? */
|
|
if ((inb(com->int_id_port) & IIR_IMASK) == IIR_NOPEND)
|
|
#ifdef COM_MULTIPORT
|
|
return (donesomething);
|
|
#else
|
|
return;
|
|
#endif /* COM_MULTIPORT */
|
|
}
|
|
}
|
|
|
|
static int
|
|
tiocm_xxx2mcr(tiocm_xxx)
|
|
int tiocm_xxx;
|
|
{
|
|
int mcr;
|
|
|
|
mcr = 0;
|
|
if (tiocm_xxx & TIOCM_DTR)
|
|
mcr |= MCR_DTR;
|
|
if (tiocm_xxx & TIOCM_RTS)
|
|
mcr |= MCR_RTS;
|
|
return (mcr);
|
|
}
|
|
|
|
int
|
|
sioioctl(dev, cmd, data, flag, p)
|
|
dev_t dev;
|
|
int cmd;
|
|
caddr_t data;
|
|
int flag;
|
|
struct proc *p;
|
|
{
|
|
struct com_s *com;
|
|
int error;
|
|
Port_t iobase;
|
|
int mcr;
|
|
int msr;
|
|
int s;
|
|
int tiocm_xxx;
|
|
struct tty *tp;
|
|
|
|
com = com_addr(UNIT(dev));
|
|
tp = com->tp;
|
|
|
|
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag);
|
|
if (error >= 0)
|
|
return (error);
|
|
error = ttioctl(tp, cmd, data, flag);
|
|
#ifdef COM_BIDIR
|
|
/* XXX: plug security hole while stucky bits not yet implemented */
|
|
|
|
if (com->bidir && com->active_in && p->p_ucred->cr_uid != 0)
|
|
tp->t_cflag &= ~CLOCAL;
|
|
#endif
|
|
if (error >= 0) {
|
|
tp->t_lowat = 0; /* XXX part of ttywait() deadlock fix */
|
|
return (error);
|
|
}
|
|
|
|
iobase = com->iobase;
|
|
s = spltty();
|
|
switch (cmd) {
|
|
case TIOCSBRK:
|
|
outb(iobase + com_cfcr, com->cfcr_image |= CFCR_SBREAK);
|
|
break;
|
|
case TIOCCBRK:
|
|
outb(iobase + com_cfcr, com->cfcr_image &= ~CFCR_SBREAK);
|
|
break;
|
|
case TIOCSDTR:
|
|
commctl(com, MCR_DTR, DMBIS);
|
|
break;
|
|
case TIOCCDTR:
|
|
commctl(com, MCR_DTR, DMBIC);
|
|
break;
|
|
case TIOCMSET:
|
|
commctl(com, tiocm_xxx2mcr(*(int *)data), DMSET);
|
|
break;
|
|
case TIOCMBIS:
|
|
commctl(com, tiocm_xxx2mcr(*(int *)data), DMBIS);
|
|
break;
|
|
case TIOCMBIC:
|
|
commctl(com, tiocm_xxx2mcr(*(int *)data), DMBIC);
|
|
break;
|
|
case TIOCMGET:
|
|
tiocm_xxx = TIOCM_LE; /* XXX - always enabled while open */
|
|
mcr = com->mcr_image;
|
|
if (mcr & MCR_DTR)
|
|
tiocm_xxx |= TIOCM_DTR;
|
|
if (mcr & MCR_RTS)
|
|
tiocm_xxx |= TIOCM_RTS;
|
|
msr = com->prev_modem_status;
|
|
if (msr & MSR_CTS)
|
|
tiocm_xxx |= TIOCM_CTS;
|
|
if (msr & MSR_DCD)
|
|
tiocm_xxx |= TIOCM_CD;
|
|
if (msr & MSR_DSR)
|
|
tiocm_xxx |= TIOCM_DSR;
|
|
/*
|
|
* XXX - MSR_RI is naturally volatile, and we make MSR_TERI
|
|
* more volatile by reading the modem status a lot. Perhaps
|
|
* we should latch both bits until the status is read here.
|
|
*/
|
|
if (msr & (MSR_RI | MSR_TERI))
|
|
tiocm_xxx |= TIOCM_RI;
|
|
*(int *)data = tiocm_xxx;
|
|
break;
|
|
#ifdef COM_BIDIR
|
|
case TIOCMSBIDIR:
|
|
/* must be root to set bidir. capability */
|
|
error = suser(p->p_ucred, &p->p_acflag);
|
|
if (error != 0) {
|
|
splx(s);
|
|
return(EPERM);
|
|
}
|
|
|
|
/* if it's the console, can't do it (XXX why?) */
|
|
if (UNIT(dev) == comconsole) {
|
|
splx(s);
|
|
return(ENOTTY);
|
|
}
|
|
|
|
#if 0
|
|
/* XXX - can't do the next, for obvious reasons...
|
|
* but there are problems to be looked at...
|
|
*/
|
|
/* if the port is active, don't do it */
|
|
if (com->active) {
|
|
splx(s);
|
|
return(EBUSY);
|
|
}
|
|
#endif
|
|
|
|
com->bidir = *(int *)data;
|
|
break;
|
|
case TIOCMGBIDIR:
|
|
*(int *)data = com->bidir;
|
|
break;
|
|
#endif /* COM_BIDIR */
|
|
case TIOCMSDTRWAIT:
|
|
/* must be root since the wait applies to following logins */
|
|
error = suser(p->p_ucred, &p->p_acflag);
|
|
if (error != 0) {
|
|
splx(s);
|
|
return(EPERM);
|
|
}
|
|
|
|
/* if it's the console, can't do it (XXX why?) */
|
|
if (UNIT(dev) == comconsole) {
|
|
splx(s);
|
|
return(ENOTTY);
|
|
}
|
|
|
|
com->dtr_wait = *(int *)data;
|
|
break;
|
|
case TIOCMGDTRWAIT:
|
|
*(int *)data = com->dtr_wait;
|
|
break;
|
|
default:
|
|
splx(s);
|
|
return (ENOTTY);
|
|
}
|
|
splx(s);
|
|
return (0);
|
|
}
|
|
|
|
/* cancel pending output */
|
|
static void
|
|
comflush(com)
|
|
struct com_s *com;
|
|
{
|
|
struct ringb *rbp;
|
|
|
|
disable_intr();
|
|
if (com->state & CS_ODONE)
|
|
com_events -= LOTS_OF_EVENTS;
|
|
com->state &= ~(CS_ODONE | CS_BUSY);
|
|
enable_intr();
|
|
rbp = &com->tp->t_out;
|
|
rbp->rb_hd += com->ocount;
|
|
rbp->rb_hd = RB_ROLLOVER(rbp, rbp->rb_hd);
|
|
com->ocount = 0;
|
|
com->tp->t_state &= ~TS_BUSY;
|
|
}
|
|
|
|
static void
|
|
compoll()
|
|
{
|
|
static bool_t awake = FALSE;
|
|
struct com_s *com;
|
|
int s;
|
|
int unit;
|
|
|
|
if (com_events == 0)
|
|
return;
|
|
disable_intr();
|
|
if (awake) {
|
|
enable_intr();
|
|
return;
|
|
}
|
|
awake = TRUE;
|
|
enable_intr();
|
|
s = spltty();
|
|
repeat:
|
|
for (unit = 0; unit < NSIO; ++unit) {
|
|
u_char *buf;
|
|
u_char *ibuf;
|
|
int incc;
|
|
struct tty *tp;
|
|
|
|
com = com_addr(unit);
|
|
if (com == NULL)
|
|
continue;
|
|
tp = com->tp;
|
|
|
|
buf = NULL; /* avoid compiler warning */
|
|
/* switch the role of the low-level input buffers */
|
|
if (com->iptr == (ibuf = com->ibuf))
|
|
incc = 0;
|
|
else {
|
|
buf = ibuf;
|
|
disable_intr();
|
|
incc = com->iptr - buf;
|
|
com_events -= incc;
|
|
if (ibuf == com->ibuf1)
|
|
ibuf = com->ibuf2;
|
|
else
|
|
ibuf = com->ibuf1;
|
|
com->ibufend = ibuf + RS_IBUFSIZE;
|
|
com->ihighwater = ibuf + RS_IHIGHWATER;
|
|
com->iptr = ibuf;
|
|
|
|
/*
|
|
* There is now room for another low-level buffer full
|
|
* of input, so enable RTS if it is now disabled and
|
|
* there is room in the high-level buffer.
|
|
*/
|
|
if (!(com->mcr_image & MCR_RTS)
|
|
&& !(tp->t_state & TS_RTS_IFLOW))
|
|
outb(com->modem_ctl_port,
|
|
com->mcr_image |= MCR_RTS);
|
|
enable_intr();
|
|
com->ibuf = ibuf;
|
|
}
|
|
|
|
if (com->state & CS_CHECKMSR) {
|
|
u_char delta_modem_status;
|
|
|
|
disable_intr();
|
|
delta_modem_status = com->last_modem_status
|
|
^ com->prev_modem_status;
|
|
com->prev_modem_status = com->last_modem_status;
|
|
com_events -= LOTS_OF_EVENTS;
|
|
com->state &= ~CS_CHECKMSR;
|
|
enable_intr();
|
|
if (delta_modem_status & MSR_DCD && !FAKE_DCD(unit)) {
|
|
if (com->prev_modem_status & MSR_DCD) {
|
|
(*linesw[tp->t_line].l_modem)(tp, 1);
|
|
#ifdef COM_BIDIR
|
|
wakeup((caddr_t) &com->active_in);
|
|
#endif /* COM_BIDIR */
|
|
}
|
|
else
|
|
(*linesw[tp->t_line].l_modem)(tp, 0);
|
|
}
|
|
}
|
|
|
|
/* XXX */
|
|
if (TRUE) {
|
|
u_int delta;
|
|
u_int delta_error_counts[CE_NTYPES];
|
|
int errnum;
|
|
u_long total;
|
|
|
|
disable_intr();
|
|
bcopy(com->delta_error_counts, delta_error_counts,
|
|
sizeof delta_error_counts);
|
|
bzero(com->delta_error_counts,
|
|
sizeof delta_error_counts);
|
|
enable_intr();
|
|
for (errnum = 0; errnum < CE_NTYPES; ++errnum) {
|
|
delta = delta_error_counts[errnum];
|
|
if (delta != 0) {
|
|
total =
|
|
com->error_counts[errnum] += delta;
|
|
log(LOG_WARNING,
|
|
"sio%d: %u more %s%s (total %lu)\n",
|
|
unit, delta, error_desc[errnum],
|
|
delta == 1 ? "" : "s", total);
|
|
}
|
|
}
|
|
}
|
|
if (com->state & CS_ODONE) {
|
|
comflush(com);
|
|
/* XXX - why isn't the table used for t_line == 0? */
|
|
if (tp->t_line != 0)
|
|
(*linesw[tp->t_line].l_start)(tp);
|
|
else
|
|
comstart(tp);
|
|
}
|
|
if (incc <= 0 || !(tp->t_state & TS_ISOPEN))
|
|
continue;
|
|
if (com->state & CS_RTS_IFLOW
|
|
&& RB_LEN(&tp->t_raw) + incc >= RB_I_HIGH_WATER
|
|
&& !(tp->t_state & TS_RTS_IFLOW)
|
|
/*
|
|
* XXX - need RTS flow control for all line disciplines.
|
|
* Only have it in standard one now.
|
|
*/
|
|
&& linesw[tp->t_line].l_rint == ttyinput) {
|
|
tp->t_state |= TS_RTS_IFLOW;
|
|
ttstart(tp);
|
|
}
|
|
/*
|
|
* Avoid the grotesquely inefficient lineswitch routine
|
|
* (ttyinput) in "raw" mode. It usually takes about 450
|
|
* instructions (that's without canonical processing or echo!).
|
|
* slinput is reasonably fast (usually 40 instructions plus
|
|
* call overhead).
|
|
*/
|
|
if (!(tp->t_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP
|
|
| IXOFF | IXON))
|
|
&& !(tp->t_lflag & (ECHO | ECHONL | ICANON | IEXTEN | ISIG
|
|
| PENDIN))
|
|
&& !(tp->t_state & (TS_CNTTB | TS_LNCH))
|
|
&& linesw[tp->t_line].l_rint == ttyinput) {
|
|
tk_nin += incc;
|
|
tk_rawcc += incc;
|
|
tp->t_rawcc += incc;
|
|
com->delta_error_counts[CE_TTY_BUF_OVERFLOW]
|
|
+= incc - rb_write(&tp->t_raw, (char *) buf,
|
|
incc);
|
|
ttwakeup(tp);
|
|
if (tp->t_state & TS_TTSTOP
|
|
&& (tp->t_iflag & IXANY
|
|
|| tp->t_cc[VSTART] == tp->t_cc[VSTOP])) {
|
|
tp->t_state &= ~TS_TTSTOP;
|
|
tp->t_lflag &= ~FLUSHO;
|
|
ttstart(tp);
|
|
}
|
|
}
|
|
else {
|
|
do {
|
|
u_char line_status;
|
|
int recv_data;
|
|
|
|
line_status = (u_char) buf[CE_INPUT_OFFSET];
|
|
recv_data = (u_char) *buf++;
|
|
if (line_status
|
|
& (LSR_BI | LSR_FE | LSR_OE | LSR_PE)) {
|
|
if (line_status & LSR_BI)
|
|
recv_data |= TTY_BI;
|
|
if (line_status & LSR_FE)
|
|
recv_data |= TTY_FE;
|
|
if (line_status & LSR_OE)
|
|
recv_data |= TTY_OE;
|
|
if (line_status & LSR_PE)
|
|
recv_data |= TTY_PE;
|
|
}
|
|
(*linesw[tp->t_line].l_rint)(recv_data, tp);
|
|
} while (--incc > 0);
|
|
}
|
|
if (com_events == 0)
|
|
break;
|
|
}
|
|
if (com_events >= LOTS_OF_EVENTS)
|
|
goto repeat;
|
|
splx(s);
|
|
awake = FALSE;
|
|
}
|
|
|
|
static int
|
|
comparam(tp, t)
|
|
struct tty *tp;
|
|
struct termios *t;
|
|
{
|
|
u_int cfcr;
|
|
int cflag;
|
|
struct com_s *com;
|
|
int divisor;
|
|
int error;
|
|
Port_t iobase;
|
|
int s;
|
|
int unit;
|
|
|
|
/* check requested parameters */
|
|
divisor = ttspeedtab(t->c_ospeed, comspeedtab);
|
|
if (t->c_ispeed == 0)
|
|
t->c_ispeed = t->c_ospeed;
|
|
if (divisor < 0 || t->c_ispeed != t->c_ospeed)
|
|
return (EINVAL);
|
|
|
|
/* parameters are OK, convert them to the com struct and the device */
|
|
unit = UNIT(tp->t_dev);
|
|
com = com_addr(unit);
|
|
iobase = com->iobase;
|
|
s = spltty();
|
|
if (divisor == 0)
|
|
commctl(com, MCR_DTR, DMBIC); /* hang up line */
|
|
else
|
|
commctl(com, MCR_DTR, DMBIS);
|
|
cflag = t->c_cflag;
|
|
switch (cflag & CSIZE) {
|
|
case CS5:
|
|
cfcr = CFCR_5BITS;
|
|
break;
|
|
case CS6:
|
|
cfcr = CFCR_6BITS;
|
|
break;
|
|
case CS7:
|
|
cfcr = CFCR_7BITS;
|
|
break;
|
|
default:
|
|
cfcr = CFCR_8BITS;
|
|
break;
|
|
}
|
|
if (cflag & PARENB) {
|
|
cfcr |= CFCR_PENAB;
|
|
if (!(cflag & PARODD))
|
|
cfcr |= CFCR_PEVEN;
|
|
}
|
|
if (cflag & CSTOPB)
|
|
cfcr |= CFCR_STOPB;
|
|
|
|
/*
|
|
* Some UARTs lock up if the divisor latch registers are selected
|
|
* while the UART is doing output (they refuse to transmit anything
|
|
* more until given a hard reset). Fix this by stopping filling
|
|
* the device buffers and waiting for them to drain. Reading the
|
|
* line status port outside of siointr() might lose some receiver
|
|
* error bits, but that is acceptable here.
|
|
*/
|
|
disable_intr();
|
|
retry:
|
|
com->state &= ~CS_TTGO;
|
|
enable_intr();
|
|
while ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY))
|
|
!= (LSR_TSRE | LSR_TXRDY)) {
|
|
error = ttysleep(tp, (caddr_t)&tp->t_raw, TTIPRI | PCATCH,
|
|
"sioparam", 1);
|
|
if (error != 0 && error != EAGAIN) {
|
|
if (!(tp->t_state & TS_TTSTOP)) {
|
|
disable_intr();
|
|
com->state |= CS_TTGO;
|
|
enable_intr();
|
|
}
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
disable_intr(); /* very important while com_data is hidden */
|
|
|
|
/*
|
|
* XXX - clearing CS_TTGO is not sufficient to stop further output,
|
|
* because compoll() calls comstart() which set it again because
|
|
* TS_TTSTOP is set. Clearing TS_TTSTOP would not be sufficient,
|
|
* for similar reasons.
|
|
*/
|
|
if ((inb(com->line_status_port) & (LSR_TSRE | LSR_TXRDY))
|
|
!= (LSR_TSRE | LSR_TXRDY))
|
|
goto retry;
|
|
|
|
if (divisor != 0) {
|
|
outb(iobase + com_cfcr, cfcr | CFCR_DLAB);
|
|
outb(iobase + com_dlbl, divisor & 0xFF);
|
|
outb(iobase + com_dlbh, (u_int) divisor >> 8);
|
|
}
|
|
outb(iobase + com_cfcr, com->cfcr_image = cfcr);
|
|
if (!(tp->t_state & TS_TTSTOP))
|
|
com->state |= CS_TTGO;
|
|
if (cflag & CRTS_IFLOW)
|
|
com->state |= CS_RTS_IFLOW; /* XXX - secondary changes? */
|
|
else
|
|
com->state &= ~CS_RTS_IFLOW;
|
|
|
|
/*
|
|
* Set up state to handle output flow control.
|
|
* XXX - worth handling MDMBUF (DCD) flow control at the lowest level?
|
|
* Now has 16+ msec latency, while CTS flow has 50- usec latency.
|
|
*/
|
|
com->state &= ~CS_CTS_OFLOW;
|
|
com->state |= CS_ODEVREADY;
|
|
if (cflag & CCTS_OFLOW) {
|
|
com->state |= CS_CTS_OFLOW;
|
|
if (!(com->last_modem_status & MSR_CTS))
|
|
com->state &= ~CS_ODEVREADY;
|
|
}
|
|
|
|
siointr(unit); /* recover from fiddling with CS_TTGO */
|
|
enable_intr();
|
|
splx(s);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
comstart(tp)
|
|
struct tty *tp;
|
|
{
|
|
struct com_s *com;
|
|
int s;
|
|
int unit;
|
|
|
|
unit = UNIT(tp->t_dev);
|
|
com = com_addr(unit);
|
|
s = spltty();
|
|
disable_intr();
|
|
if (tp->t_state & TS_TTSTOP)
|
|
com->state &= ~CS_TTGO;
|
|
else
|
|
com->state |= CS_TTGO;
|
|
if (tp->t_state & TS_RTS_IFLOW) {
|
|
if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW)
|
|
outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS);
|
|
}
|
|
else {
|
|
if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater)
|
|
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
|
|
}
|
|
enable_intr();
|
|
if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP))
|
|
goto out;
|
|
if (RB_LEN(&tp->t_out) <= tp->t_lowat) {
|
|
if (tp->t_state & TS_ASLEEP) {
|
|
tp->t_state &= ~TS_ASLEEP;
|
|
wakeup((caddr_t)&tp->t_out);
|
|
}
|
|
if (tp->t_wsel) {
|
|
selwakeup(tp->t_wsel, tp->t_state & TS_WCOLL);
|
|
tp->t_wsel = 0;
|
|
tp->t_state &= ~TS_WCOLL;
|
|
}
|
|
}
|
|
if (com->ocount != 0) {
|
|
disable_intr();
|
|
siointr(unit);
|
|
enable_intr();
|
|
}
|
|
else if (RB_LEN(&tp->t_out) != 0) {
|
|
tp->t_state |= TS_BUSY;
|
|
com->ocount = RB_CONTIGGET(&tp->t_out);
|
|
disable_intr();
|
|
com->obufend = (com->optr = (u_char *) tp->t_out.rb_hd)
|
|
+ com->ocount;
|
|
com->state |= CS_BUSY;
|
|
siointr(unit); /* fake interrupt to start output */
|
|
enable_intr();
|
|
}
|
|
out:
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
siostop(tp, rw)
|
|
struct tty *tp;
|
|
int rw;
|
|
{
|
|
struct com_s *com;
|
|
|
|
com = com_addr(UNIT(tp->t_dev));
|
|
if (rw & FWRITE)
|
|
comflush(com);
|
|
disable_intr();
|
|
if (rw & FREAD) {
|
|
com_events -= (com->iptr - com->ibuf);
|
|
com->iptr = com->ibuf;
|
|
}
|
|
if (tp->t_state & TS_TTSTOP)
|
|
com->state &= ~CS_TTGO;
|
|
else
|
|
com->state |= CS_TTGO;
|
|
enable_intr();
|
|
}
|
|
|
|
static void
|
|
commctl(com, bits, how)
|
|
struct com_s *com;
|
|
int bits;
|
|
int how;
|
|
{
|
|
disable_intr();
|
|
switch (how) {
|
|
case DMSET:
|
|
outb(com->modem_ctl_port,
|
|
com->mcr_image = bits | (com->mcr_image & MCR_IENABLE));
|
|
break;
|
|
case DMBIS:
|
|
outb(com->modem_ctl_port, com->mcr_image |= bits);
|
|
break;
|
|
case DMBIC:
|
|
outb(com->modem_ctl_port, com->mcr_image &= ~bits);
|
|
break;
|
|
}
|
|
enable_intr();
|
|
}
|
|
|
|
static void
|
|
comwakeup(chan, ticks)
|
|
caddr_t chan;
|
|
int ticks;
|
|
{
|
|
struct com_s *com;
|
|
int unit;
|
|
|
|
timeout(comwakeup, (caddr_t) NULL, hz / 100);
|
|
if (com_events != 0)
|
|
/* schedule compoll() to run when the cpl allows */
|
|
schedsoftcom();
|
|
|
|
/* recover from lost output interrupts */
|
|
for (unit = 0; unit < NSIO; ++unit) {
|
|
com = com_addr(unit);
|
|
if (com != NULL && com->state >= (CS_BUSY | CS_TTGO)) {
|
|
disable_intr();
|
|
siointr(unit);
|
|
enable_intr();
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
void
|
|
softsio1()
|
|
{
|
|
compoll();
|
|
}
|
|
|
|
/*
|
|
* Following are all routines needed for SIO to act as console
|
|
* XXX - not tested in this version
|
|
* XXX - i386/cons.c only knows about the com driver (NCOM and not NSIO)
|
|
* XXX - check that the corresponding serial interrupts are never enabled
|
|
*/
|
|
#include "i386/i386/cons.h"
|
|
|
|
void
|
|
siocnprobe(cp)
|
|
struct consdev *cp;
|
|
{
|
|
int unit;
|
|
|
|
/* locate the major number */
|
|
for (commajor = 0; commajor < nchrdev; commajor++)
|
|
if (cdevsw[commajor].d_open == sioopen)
|
|
break;
|
|
|
|
/* XXX: ick */
|
|
unit = UNIT(CONUNIT);
|
|
com_addr(unit) = &com_structs[unit];
|
|
com_addr(unit)->iobase = CONADDR;
|
|
|
|
/* make sure hardware exists? XXX */
|
|
|
|
/* initialize required fields */
|
|
cp->cn_dev = makedev(commajor, unit);
|
|
cp->cn_tp = &sio_tty[unit];
|
|
#ifdef COMCONSOLE
|
|
cp->cn_pri = CN_REMOTE; /* Force a serial port console */
|
|
#else
|
|
cp->cn_pri = CN_NORMAL;
|
|
#endif
|
|
}
|
|
|
|
void
|
|
siocninit(cp)
|
|
struct consdev *cp;
|
|
{
|
|
int unit;
|
|
|
|
unit = UNIT(cp->cn_dev);
|
|
cominit(unit, comdefaultrate);
|
|
comconsole = unit;
|
|
comconsinit = TRUE;
|
|
}
|
|
|
|
static void
|
|
cominit(unit, rate)
|
|
int unit;
|
|
int rate;
|
|
{
|
|
Port_t iobase;
|
|
int s;
|
|
|
|
iobase = com_addr(unit)->iobase;
|
|
s = splhigh();
|
|
outb(iobase + com_cfcr, CFCR_DLAB);
|
|
rate = ttspeedtab(comdefaultrate, comspeedtab);
|
|
outb(iobase + com_dlbl, rate & 0xFF);
|
|
outb(iobase + com_dlbh, rate >> 8);
|
|
outb(iobase + com_cfcr, CFCR_8BITS);
|
|
outb(iobase + com_fifo,
|
|
FIFO_ENABLE | FIFO_TRIGGER | FIFO_RCV_RST | FIFO_XMT_RST);
|
|
DELAY(100);
|
|
(void) inb(iobase + com_lsr);
|
|
(void) inb(iobase + com_data);
|
|
(void) inb(iobase + com_msr);
|
|
|
|
/*
|
|
* XXX - fishy to enable interrupts and then poll.
|
|
* It shouldn't be necessary to ready the iir.
|
|
*/
|
|
outb(iobase + com_ier, IER_ERXRDY | IER_ETXRDY | IER_ERLS | IER_EMSC);
|
|
(void) inb(iobase + com_iir);
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
siocngetc(dev)
|
|
dev_t dev;
|
|
{
|
|
int c;
|
|
Port_t iobase;
|
|
int s;
|
|
|
|
iobase = com_addr(UNIT(dev))->iobase;
|
|
s = splhigh();
|
|
while (!(inb(iobase + com_lsr) & LSR_RXRDY))
|
|
;
|
|
c = inb(iobase + com_data);
|
|
(void) inb(iobase + com_iir);
|
|
splx(s);
|
|
return (c);
|
|
}
|
|
|
|
void
|
|
siocnputc(dev, c)
|
|
dev_t dev;
|
|
int c;
|
|
{
|
|
Port_t iobase;
|
|
int s;
|
|
int timo;
|
|
|
|
iobase = com_addr(UNIT(dev))->iobase;
|
|
s = splhigh();
|
|
#ifdef KGDB
|
|
if (dev != kgdb_dev)
|
|
#endif
|
|
if (!comconsinit) {
|
|
cominit(UNIT(dev), comdefaultrate);
|
|
comconsinit = TRUE;
|
|
}
|
|
/* wait for any pending transmission to finish */
|
|
timo = 50000;
|
|
while (!(inb(iobase + com_lsr) & LSR_TXRDY) && --timo)
|
|
;
|
|
outb(iobase + com_data, c);
|
|
/* wait for this transmission to complete */
|
|
timo = 1500000;
|
|
while (!(inb(iobase + com_lsr) & LSR_TXRDY) && --timo)
|
|
;
|
|
/* clear any interrupts generated by this transmission */
|
|
(void) inb(iobase + com_iir);
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* XXX - sioselect() is almost a copy of ttselect(). It is required because
|
|
* ttselect() can't determine the tty struct because stuff is encoded in the
|
|
* high bit of the minor number.
|
|
*/
|
|
int
|
|
sioselect(dev, rw, p)
|
|
dev_t dev;
|
|
int rw;
|
|
struct proc *p;
|
|
{
|
|
struct tty *tp = &sio_tty[UNIT(dev)];
|
|
int nread;
|
|
int s = spltty();
|
|
struct proc *selp;
|
|
|
|
switch (rw) {
|
|
|
|
case FREAD:
|
|
nread = ttnread(tp);
|
|
if (nread > 0 ||
|
|
((tp->t_cflag&CLOCAL) == 0 && (tp->t_state&TS_CARR_ON) == 0))
|
|
goto win;
|
|
if (tp->t_rsel && (selp = pfind(tp->t_rsel)) && selp->p_wchan == (caddr_t)&selwait)
|
|
tp->t_state |= TS_RCOLL;
|
|
else
|
|
tp->t_rsel = p->p_pid;
|
|
break;
|
|
|
|
case FWRITE:
|
|
if (RB_LEN(&tp->t_out) <= tp->t_lowat)
|
|
goto win;
|
|
if (tp->t_wsel && (selp = pfind(tp->t_wsel)) && selp->p_wchan == (caddr_t)&selwait)
|
|
tp->t_state |= TS_WCOLL;
|
|
else
|
|
tp->t_wsel = p->p_pid;
|
|
break;
|
|
}
|
|
splx(s);
|
|
return (0);
|
|
win:
|
|
splx(s);
|
|
return (1);
|
|
}
|
|
|
|
#endif /* NSIO > 0 */
|