freebsd-skq/sys/dev/pcf/pcfvar.h
Stefan Farfeleder 5908d366fb Consistently use __inline instead of __inline__ as the former is an empty macro
in <sys/cdefs.h> for compilers without support for inline.
2004-07-04 16:11:03 +00:00

143 lines
4.1 KiB
C

/*-
* Copyright (c) 1998 Nicolas Souchu, Marc Bouget
* Copyright (c) 2004 Joerg Wunsch
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#define IO_PCFSIZE 2
#define TIMEOUT 9999 /* XXX */
/* Status bits of S1 register (read only) */
#define nBB 0x01 /* busy when low set/reset by STOP/START*/
#define LAB 0x02 /* lost arbitration bit in multi-master mode */
#define AAS 0x04 /* addressed as slave */
#define LRB 0x08 /* last received byte when not AAS */
#define AD0 0x08 /* general call received when AAS */
#define BER 0x10 /* bus error, misplaced START or STOP */
#define STS 0x20 /* STOP detected in slave receiver mode */
#define PIN 0x80 /* pending interrupt not (r/w) */
/* Control bits of S1 register (write only) */
#define ACK 0x01
#define STO 0x02
#define STA 0x04
#define ENI 0x08
#define ES2 0x10
#define ES1 0x20
#define ESO 0x40
#define BUFSIZE 2048
#define SLAVE_TRANSMITTER 0x1
#define SLAVE_RECEIVER 0x2
#define PCF_DEFAULT_ADDR 0xaa
struct pcf_softc {
u_char pcf_addr; /* interface I2C address */
int pcf_flags; /* IIC_POLLED? */
int pcf_slave_mode; /* receiver or transmitter */
int pcf_started; /* 1 if start condition sent */
device_t iicbus; /* the corresponding iicbus */
/* Resource handling stuff. */
void *intr_cookie;
int rid_ioport;
int rid_irq;
struct resource *res_ioport;
struct resource *res_irq;
};
#define DEVTOSOFTC(dev) ((struct pcf_softc *)device_get_softc(dev))
/*
* PCF8584 datasheet : when operate at 8 MHz or more, a minimun time of
* 6 clocks cycles must be left between two consecutives access
*/
#define pcf_nops() DELAY(10)
#define dummy_read(sc) pcf_get_S0(sc)
#define dummy_write(sc) pcf_set_S0(sc, 0)
/*
* Specific register access to PCF8584
*/
static __inline void
pcf_set_S0(struct pcf_softc *sc, int data)
{
bus_space_write_1(sc->res_ioport->r_bustag,
sc->res_ioport->r_bushandle,
0, data);
pcf_nops();
}
static __inline void
pcf_set_S1(struct pcf_softc *sc, int data)
{
bus_space_write_1(sc->res_ioport->r_bustag,
sc->res_ioport->r_bushandle,
1, data);
pcf_nops();
}
static __inline char
pcf_get_S0(struct pcf_softc *sc)
{
char data;
data = bus_space_read_1(sc->res_ioport->r_bustag,
sc->res_ioport->r_bushandle, 0);
pcf_nops();
return (data);
}
static __inline char
pcf_get_S1(struct pcf_softc *sc)
{
char data;
data = bus_space_read_1(sc->res_ioport->r_bustag,
sc->res_ioport->r_bushandle, 1);
pcf_nops();
return (data);
}
extern int pcf_repeated_start(device_t, u_char, int);
extern int pcf_start(device_t, u_char, int);
extern int pcf_stop(device_t);
extern int pcf_write(device_t, char *, int, int *, int);
extern int pcf_read(device_t, char *, int, int *, int, int);
extern int pcf_rst_card(device_t, u_char, u_char, u_char *);
extern driver_intr_t pcf_intr;
#define PCF_MODVER 1
#define PCF_MINVER 1
#define PCF_MAXVER 1
#define PCF_PREFVER PCF_MODVER