d5c9bbfbf2
- Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
1220 lines
29 KiB
C
1220 lines
29 KiB
C
/* $NetBSD: ugen.c,v 1.27 1999/10/28 12:08:38 augustss Exp $ */
|
|
/* $FreeBSD$ */
|
|
|
|
/*
|
|
* Copyright (c) 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (augustss@carlstedt.se) at
|
|
* Carlstedt Research & Technology.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
#include <sys/device.h>
|
|
#include <sys/ioctl.h>
|
|
#elif defined(__FreeBSD__)
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/ioccom.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/filio.h>
|
|
#endif
|
|
#include <sys/conf.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/file.h>
|
|
#include <sys/select.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/vnode.h>
|
|
#include <sys/poll.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
|
|
#ifdef UGEN_DEBUG
|
|
#define DPRINTF(x) if (ugendebug) logprintf x
|
|
#define DPRINTFN(n,x) if (ugendebug>(n)) logprintf x
|
|
int ugendebug = 10;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#define DPRINTFN(n,x)
|
|
#endif
|
|
|
|
struct ugen_endpoint {
|
|
struct ugen_softc *sc;
|
|
usb_endpoint_descriptor_t *edesc;
|
|
usbd_interface_handle iface;
|
|
int state;
|
|
#define UGEN_ASLP 0x02 /* waiting for data */
|
|
#define UGEN_SHORT_OK 0x04 /* short xfers are OK */
|
|
usbd_pipe_handle pipeh;
|
|
struct clist q;
|
|
struct selinfo rsel;
|
|
void *ibuf;
|
|
u_int32_t timeout;
|
|
};
|
|
|
|
#define UGEN_CHUNK 128 /* chunk size for read */
|
|
#define UGEN_IBSIZE 1020 /* buffer size */
|
|
#define UGEN_BBSIZE 1024
|
|
|
|
struct ugen_softc {
|
|
USBBASEDEVICE sc_dev; /* base device */
|
|
usbd_device_handle sc_udev;
|
|
|
|
char sc_is_open[USB_MAX_ENDPOINTS];
|
|
struct ugen_endpoint sc_endpoints[USB_MAX_ENDPOINTS][2];
|
|
#define OUT 0
|
|
#define IN 1
|
|
|
|
int sc_refcnt;
|
|
u_char sc_dying;
|
|
};
|
|
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
cdev_decl(ugen);
|
|
#elif defined(__FreeBSD__)
|
|
d_open_t ugenopen;
|
|
d_close_t ugenclose;
|
|
d_read_t ugenread;
|
|
d_write_t ugenwrite;
|
|
d_ioctl_t ugenioctl;
|
|
d_poll_t ugenpoll;
|
|
|
|
#define UGEN_CDEV_MAJOR 114
|
|
|
|
static struct cdevsw ugen_cdevsw = {
|
|
/* open */ ugenopen,
|
|
/* close */ ugenclose,
|
|
/* read */ ugenread,
|
|
/* write */ ugenwrite,
|
|
/* ioctl */ ugenioctl,
|
|
/* poll */ ugenpoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ nostrategy,
|
|
/* name */ "ugen",
|
|
/* maj */ UGEN_CDEV_MAJOR,
|
|
/* dump */ nodump,
|
|
/* psize */ nopsize,
|
|
/* flags */ 0,
|
|
/* bmaj */ -1
|
|
};
|
|
#endif
|
|
|
|
static void ugenintr __P((usbd_xfer_handle xfer, usbd_private_handle addr,
|
|
usbd_status status));
|
|
|
|
static int ugen_do_read __P((struct ugen_softc *, int, struct uio *, int));
|
|
static int ugen_do_write __P((struct ugen_softc *, int, struct uio *, int));
|
|
static int ugen_do_ioctl __P((struct ugen_softc *, int, u_long,
|
|
caddr_t, int, struct proc *));
|
|
static int ugen_set_config __P((struct ugen_softc *sc, int configno));
|
|
static usb_config_descriptor_t *ugen_get_cdesc __P((struct ugen_softc *sc,
|
|
int index, int *lenp));
|
|
static usbd_status ugen_set_interface __P((struct ugen_softc *, int, int));
|
|
static int ugen_get_alt_index __P((struct ugen_softc *sc, int ifaceidx));
|
|
|
|
#define UGENUNIT(n) ((minor(n) >> 4) & 0xf)
|
|
#define UGENENDPOINT(n) (minor(n) & 0xf)
|
|
#define UGENMINOR(u, e) (((u) << 4) | (e))
|
|
|
|
USB_DECLARE_DRIVER(ugen);
|
|
|
|
USB_MATCH(ugen)
|
|
{
|
|
USB_MATCH_START(ugen, uaa);
|
|
|
|
if (uaa->usegeneric)
|
|
return (UMATCH_GENERIC);
|
|
else
|
|
return (UMATCH_NONE);
|
|
}
|
|
|
|
USB_ATTACH(ugen)
|
|
{
|
|
USB_ATTACH_START(ugen, sc, uaa);
|
|
char devinfo[1024];
|
|
usbd_status err;
|
|
int conf;
|
|
|
|
usbd_devinfo(uaa->device, 0, devinfo);
|
|
USB_ATTACH_SETUP;
|
|
printf("%s: %s\n", USBDEVNAME(sc->sc_dev), devinfo);
|
|
|
|
sc->sc_udev = uaa->device;
|
|
conf = 1; /* XXX should not hard code 1 */
|
|
err = ugen_set_config(sc, conf);
|
|
if (err) {
|
|
printf("%s: setting configuration %d failed\n",
|
|
USBDEVNAME(sc->sc_dev), conf);
|
|
sc->sc_dying = 1;
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
|
|
USB_ATTACH_SUCCESS_RETURN;
|
|
}
|
|
|
|
static int
|
|
ugen_set_config(sc, configno)
|
|
struct ugen_softc *sc;
|
|
int configno;
|
|
{
|
|
usbd_device_handle dev = sc->sc_udev;
|
|
usbd_interface_handle iface;
|
|
usb_endpoint_descriptor_t *ed;
|
|
struct ugen_endpoint *sce;
|
|
u_int8_t niface, nendpt;
|
|
int ifaceno, endptno, endpt;
|
|
usbd_status err;
|
|
int dir;
|
|
|
|
DPRINTFN(1,("ugen_set_config: %s to configno %d, sc=%p\n",
|
|
USBDEVNAME(sc->sc_dev), configno, sc));
|
|
if (usbd_get_config_descriptor(dev)->bConfigurationValue != configno) {
|
|
/* Avoid setting the current value. */
|
|
err = usbd_set_config_no(dev, configno, 0);
|
|
if (err)
|
|
return (err);
|
|
}
|
|
|
|
err = usbd_interface_count(dev, &niface);
|
|
if (err)
|
|
return (err);
|
|
memset(sc->sc_endpoints, 0, sizeof sc->sc_endpoints);
|
|
for (ifaceno = 0; ifaceno < niface; ifaceno++) {
|
|
DPRINTFN(1,("ugen_set_config: ifaceno %d\n", ifaceno));
|
|
err = usbd_device2interface_handle(dev, ifaceno, &iface);
|
|
if (err)
|
|
return (err);
|
|
err = usbd_endpoint_count(iface, &nendpt);
|
|
if (err)
|
|
return (err);
|
|
for (endptno = 0; endptno < nendpt; endptno++) {
|
|
ed = usbd_interface2endpoint_descriptor(iface,endptno);
|
|
endpt = UE_GET_ADDR(ed->bEndpointAddress);
|
|
dir = UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN?
|
|
IN : OUT;
|
|
|
|
sce = &sc->sc_endpoints[endpt][dir];
|
|
DPRINTFN(1,("ugen_set_config: endptno %d, endpt=0x%02x"
|
|
"(%d,%d), sce=%p\n",
|
|
endptno, endpt, endpt, dir, sce));
|
|
|
|
sce->sc = sc;
|
|
sce->edesc = ed;
|
|
sce->iface = iface;
|
|
}
|
|
}
|
|
|
|
|
|
#if defined(__FreeBSD__)
|
|
/* the main device, ctrl endpoint */
|
|
make_dev(&ugen_cdevsw, UGENMINOR(USBDEVUNIT(sc->sc_dev), 0),
|
|
UID_ROOT, GID_OPERATOR, 0644, "%s", USBDEVNAME(sc->sc_dev));
|
|
|
|
for (endptno = 1; endptno < USB_MAX_ENDPOINTS; endptno++) {
|
|
if (sc->sc_endpoints[endptno][IN].sc != NULL ||
|
|
sc->sc_endpoints[endptno][OUT].sc != NULL ) {
|
|
/* endpt can be 0x81 and 0x01, representing
|
|
* endpoint address 0x01 and IN/OUT directions.
|
|
* We map both endpts to the same device,
|
|
* IN is reading from it, OUT is writing to it.
|
|
*
|
|
* In the if clause above we check whether one
|
|
* of the structs is populated.
|
|
*/
|
|
make_dev(&ugen_cdevsw,
|
|
UGENMINOR(USBDEVUNIT(sc->sc_dev), endptno),
|
|
UID_ROOT, GID_OPERATOR, 0644,
|
|
"%s.%d",
|
|
USBDEVNAME(sc->sc_dev), endptno);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return (USBD_NORMAL_COMPLETION);
|
|
}
|
|
|
|
int
|
|
ugenopen(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
struct ugen_softc *sc;
|
|
int unit = UGENUNIT(dev);
|
|
int endpt = UGENENDPOINT(dev);
|
|
usb_endpoint_descriptor_t *edesc;
|
|
struct ugen_endpoint *sce;
|
|
int dir, isize;
|
|
usbd_status err;
|
|
|
|
USB_GET_SC_OPEN(ugen, unit, sc);
|
|
|
|
DPRINTFN(5, ("ugenopen: flag=%d, mode=%d, unit=%d endpt=%d\n",
|
|
flag, mode, unit, endpt));
|
|
|
|
if (sc == NULL || sc->sc_dying)
|
|
return (ENXIO);
|
|
|
|
if (sc->sc_is_open[endpt])
|
|
return (EBUSY);
|
|
|
|
if (endpt == USB_CONTROL_ENDPOINT) {
|
|
sc->sc_is_open[USB_CONTROL_ENDPOINT] = 1;
|
|
return (0);
|
|
}
|
|
/* Make sure there are pipes for all directions. */
|
|
for (dir = OUT; dir <= IN; dir++) {
|
|
if (flag & (dir == OUT ? FWRITE : FREAD)) {
|
|
sce = &sc->sc_endpoints[endpt][dir];
|
|
if (sce == 0 || sce->edesc == 0)
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
/* Actually open the pipes. */
|
|
/* XXX Should back out properly if it fails. */
|
|
for (dir = OUT; dir <= IN; dir++) {
|
|
if (!(flag & (dir == OUT ? FWRITE : FREAD)))
|
|
continue;
|
|
sce = &sc->sc_endpoints[endpt][dir];
|
|
sce->state = 0;
|
|
sce->timeout = USBD_NO_TIMEOUT;
|
|
DPRINTFN(5, ("ugenopen: sc=%p, endpt=%d, dir=%d, sce=%p\n",
|
|
sc, endpt, dir, sce));
|
|
edesc = sce->edesc;
|
|
switch (edesc->bmAttributes & UE_XFERTYPE) {
|
|
case UE_INTERRUPT:
|
|
isize = UGETW(edesc->wMaxPacketSize);
|
|
if (isize == 0) /* shouldn't happen */
|
|
return (EINVAL);
|
|
sce->ibuf = malloc(isize, M_USBDEV, M_WAITOK);
|
|
DPRINTFN(5, ("ugenopen: intr endpt=%d,isize=%d\n",
|
|
endpt, isize));
|
|
if (clalloc(&sce->q, UGEN_IBSIZE, 0) == -1)
|
|
return (ENOMEM);
|
|
err = usbd_open_pipe_intr(sce->iface,
|
|
edesc->bEndpointAddress,
|
|
USBD_SHORT_XFER_OK, &sce->pipeh, sce,
|
|
sce->ibuf, isize, ugenintr,
|
|
USBD_DEFAULT_INTERVAL);
|
|
if (err) {
|
|
free(sce->ibuf, M_USBDEV);
|
|
clfree(&sce->q);
|
|
return (EIO);
|
|
}
|
|
DPRINTFN(5, ("ugenopen: interrupt open done\n"));
|
|
break;
|
|
case UE_BULK:
|
|
err = usbd_open_pipe(sce->iface,
|
|
edesc->bEndpointAddress, 0, &sce->pipeh);
|
|
if (err)
|
|
return (EIO);
|
|
break;
|
|
case UE_CONTROL:
|
|
case UE_ISOCHRONOUS:
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
sc->sc_is_open[endpt] = 1;
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ugenclose(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
int endpt = UGENENDPOINT(dev);
|
|
struct ugen_softc *sc;
|
|
struct ugen_endpoint *sce;
|
|
int dir;
|
|
|
|
USB_GET_SC(ugen, UGENUNIT(dev), sc);
|
|
|
|
DPRINTFN(5, ("ugenclose: flag=%d, mode=%d, unit=%d, endpt=%d\n",
|
|
flag, mode, UGENUNIT(dev), endpt));
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (!sc->sc_is_open[endpt]) {
|
|
printf("ugenclose: not open\n");
|
|
return (EINVAL);
|
|
}
|
|
#endif
|
|
|
|
if (endpt == USB_CONTROL_ENDPOINT) {
|
|
DPRINTFN(5, ("ugenclose: close control\n"));
|
|
sc->sc_is_open[endpt] = 0;
|
|
return (0);
|
|
}
|
|
|
|
for (dir = OUT; dir <= IN; dir++) {
|
|
if (!(flag & (dir == OUT ? FWRITE : FREAD)))
|
|
continue;
|
|
sce = &sc->sc_endpoints[endpt][dir];
|
|
if (sce == NULL || sce->pipeh == NULL)
|
|
continue;
|
|
DPRINTFN(5, ("ugenclose: endpt=%d dir=%d sce=%p\n",
|
|
endpt, dir, sce));
|
|
|
|
usbd_abort_pipe(sce->pipeh);
|
|
usbd_close_pipe(sce->pipeh);
|
|
sce->pipeh = NULL;
|
|
|
|
if (sce->ibuf != NULL) {
|
|
free(sce->ibuf, M_USBDEV);
|
|
sce->ibuf = NULL;
|
|
clfree(&sce->q);
|
|
|
|
}
|
|
}
|
|
sc->sc_is_open[endpt] = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ugen_do_read(sc, endpt, uio, flag)
|
|
struct ugen_softc *sc;
|
|
int endpt;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
struct ugen_endpoint *sce = &sc->sc_endpoints[endpt][IN];
|
|
u_int32_t n, tn;
|
|
char buf[UGEN_BBSIZE];
|
|
usbd_xfer_handle xfer;
|
|
usbd_status err;
|
|
int s;
|
|
int error = 0;
|
|
u_char buffer[UGEN_CHUNK];
|
|
|
|
DPRINTFN(5, ("%s: ugenread: %d\n", USBDEVNAME(sc->sc_dev), endpt));
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
if (endpt == USB_CONTROL_ENDPOINT)
|
|
return (ENODEV);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sce->edesc == NULL) {
|
|
printf("ugenread: no edesc\n");
|
|
return (EIO);
|
|
}
|
|
if (sce->pipeh == NULL) {
|
|
printf("ugenread: no pipe\n");
|
|
return (EIO);
|
|
}
|
|
#endif
|
|
|
|
switch (sce->edesc->bmAttributes & UE_XFERTYPE) {
|
|
case UE_INTERRUPT:
|
|
/* Block until activity occured. */
|
|
s = splusb();
|
|
while (sce->q.c_cc == 0) {
|
|
if (flag & IO_NDELAY) {
|
|
splx(s);
|
|
return (EWOULDBLOCK);
|
|
}
|
|
sce->state |= UGEN_ASLP;
|
|
DPRINTFN(5, ("ugenread: sleep on %p\n", sc));
|
|
error = tsleep(sce, PZERO | PCATCH, "ugenri", 0);
|
|
DPRINTFN(5, ("ugenread: woke, error=%d\n", error));
|
|
if (sc->sc_dying)
|
|
error = EIO;
|
|
if (error) {
|
|
sce->state &= ~UGEN_ASLP;
|
|
break;
|
|
}
|
|
}
|
|
splx(s);
|
|
|
|
/* Transfer as many chunks as possible. */
|
|
while (sce->q.c_cc > 0 && uio->uio_resid > 0 && !error) {
|
|
n = min(sce->q.c_cc, uio->uio_resid);
|
|
if (n > sizeof(buffer))
|
|
n = sizeof(buffer);
|
|
|
|
/* Remove a small chunk from the input queue. */
|
|
q_to_b(&sce->q, buffer, n);
|
|
DPRINTFN(5, ("ugenread: got %d chars\n", n));
|
|
|
|
/* Copy the data to the user process. */
|
|
error = uiomove(buffer, n, uio);
|
|
if (error)
|
|
break;
|
|
}
|
|
break;
|
|
case UE_BULK:
|
|
xfer = usbd_alloc_xfer(sc->sc_udev);
|
|
if (xfer == 0)
|
|
return (ENOMEM);
|
|
while ((n = min(UGEN_BBSIZE, uio->uio_resid)) != 0) {
|
|
DPRINTFN(1, ("ugenread: start transfer %d bytes\n",n));
|
|
tn = n;
|
|
err = usbd_bulk_transfer(
|
|
xfer, sce->pipeh,
|
|
sce->state & UGEN_SHORT_OK ?
|
|
USBD_SHORT_XFER_OK : 0,
|
|
sce->timeout, buf, &tn, "ugenrb");
|
|
if (err) {
|
|
if (err == USBD_INTERRUPTED)
|
|
error = EINTR;
|
|
else if (err == USBD_TIMEOUT)
|
|
error = ETIMEDOUT;
|
|
else
|
|
error = EIO;
|
|
break;
|
|
}
|
|
DPRINTFN(1, ("ugenread: got %d bytes\n", tn));
|
|
error = uiomove(buf, tn, uio);
|
|
if (error || tn < n)
|
|
break;
|
|
}
|
|
usbd_free_xfer(xfer);
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
ugenread(dev, uio, flag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
int endpt = UGENENDPOINT(dev);
|
|
struct ugen_softc *sc;
|
|
int error;
|
|
|
|
USB_GET_SC(ugen, UGENUNIT(dev), sc);
|
|
|
|
sc->sc_refcnt++;
|
|
error = ugen_do_read(sc, endpt, uio, flag);
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeup(USBDEV(sc->sc_dev));
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
ugen_do_write(sc, endpt, uio, flag)
|
|
struct ugen_softc *sc;
|
|
int endpt;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
struct ugen_endpoint *sce = &sc->sc_endpoints[endpt][OUT];
|
|
u_int32_t n;
|
|
int error = 0;
|
|
char buf[UGEN_BBSIZE];
|
|
usbd_xfer_handle xfer;
|
|
usbd_status err;
|
|
|
|
DPRINTFN(5, ("%s: ugenwrite: %d\n", USBDEVNAME(sc->sc_dev), endpt));
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
if (endpt == USB_CONTROL_ENDPOINT)
|
|
return (ENODEV);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sce->edesc == NULL) {
|
|
printf("ugenwrite: no edesc\n");
|
|
return (EIO);
|
|
}
|
|
if (sce->pipeh == NULL) {
|
|
printf("ugenwrite: no pipe\n");
|
|
return (EIO);
|
|
}
|
|
#endif
|
|
|
|
switch (sce->edesc->bmAttributes & UE_XFERTYPE) {
|
|
case UE_BULK:
|
|
xfer = usbd_alloc_xfer(sc->sc_udev);
|
|
if (xfer == 0)
|
|
return (EIO);
|
|
while ((n = min(UGEN_BBSIZE, uio->uio_resid)) != 0) {
|
|
error = uiomove(buf, n, uio);
|
|
if (error)
|
|
break;
|
|
DPRINTFN(1, ("ugenwrite: transfer %d bytes\n", n));
|
|
err = usbd_bulk_transfer(xfer, sce->pipeh, 0,
|
|
sce->timeout, buf, &n,"ugenwb");
|
|
if (err) {
|
|
if (err == USBD_INTERRUPTED)
|
|
error = EINTR;
|
|
else
|
|
error = EIO;
|
|
break;
|
|
}
|
|
}
|
|
usbd_free_xfer(xfer);
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
ugenwrite(dev, uio, flag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int flag;
|
|
{
|
|
int endpt = UGENENDPOINT(dev);
|
|
struct ugen_softc *sc;
|
|
int error;
|
|
|
|
USB_GET_SC(ugen, UGENUNIT(dev), sc);
|
|
|
|
sc->sc_refcnt++;
|
|
error = ugen_do_write(sc, endpt, uio, flag);
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeup(USBDEV(sc->sc_dev));
|
|
return (error);
|
|
}
|
|
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
int
|
|
ugen_activate(self, act)
|
|
device_ptr_t self;
|
|
enum devact act;
|
|
{
|
|
struct ugen_softc *sc = (struct ugen_softc *)self;
|
|
|
|
switch (act) {
|
|
case DVACT_ACTIVATE:
|
|
return (EOPNOTSUPP);
|
|
break;
|
|
|
|
case DVACT_DEACTIVATE:
|
|
sc->sc_dying = 1;
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
USB_DETACH(ugen)
|
|
{
|
|
USB_DETACH_START(ugen, sc);
|
|
struct ugen_endpoint *sce;
|
|
int i, dir;
|
|
int s;
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
int maj, mn;
|
|
#elif defined(__FreeBSD__)
|
|
int endptno;
|
|
dev_t dev;
|
|
struct vnode *vp;
|
|
#endif
|
|
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
DPRINTF(("ugen_detach: sc=%p flags=%d\n", sc, flags));
|
|
#elif defined(__FreeBSD__)
|
|
DPRINTF(("ugen_detach: sc=%p\n", sc));
|
|
#endif
|
|
|
|
sc->sc_dying = 1;
|
|
/* Abort all pipes. Causes processes waiting for transfer to wake. */
|
|
for (i = 0; i < USB_MAX_ENDPOINTS; i++) {
|
|
for (dir = OUT; dir <= IN; dir++) {
|
|
sce = &sc->sc_endpoints[i][dir];
|
|
if (sce && sce->pipeh)
|
|
usbd_abort_pipe(sce->pipeh);
|
|
}
|
|
}
|
|
|
|
s = splusb();
|
|
if (--sc->sc_refcnt >= 0) {
|
|
/* Wake everyone */
|
|
for (i = 0; i < USB_MAX_ENDPOINTS; i++)
|
|
wakeup(&sc->sc_endpoints[i][IN]);
|
|
/* Wait for processes to go away. */
|
|
usb_detach_wait(USBDEV(sc->sc_dev));
|
|
}
|
|
splx(s);
|
|
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
/* locate the major number */
|
|
for (maj = 0; maj < nchrdev; maj++)
|
|
if (cdevsw[maj].d_open == ugenopen)
|
|
break;
|
|
|
|
/* Nuke the vnodes for any open instances (calls close). */
|
|
mn = self->dv_unit * USB_MAX_ENDPOINTS;
|
|
vdevgone(maj, mn, mn + USB_MAX_ENDPOINTS - 1, VCHR);
|
|
#elif defined(__FreeBSD__)
|
|
dev = makedev(UGEN_CDEV_MAJOR, UGENMINOR(USBDEVUNIT(sc->sc_dev), 0));
|
|
destroy_dev(dev);
|
|
for (endptno = 1; endptno < USB_MAX_ENDPOINTS; endptno++) {
|
|
if (sc->sc_endpoints[endptno][IN].sc != NULL ||
|
|
sc->sc_endpoints[endptno][OUT].sc != NULL ) {
|
|
/* endpt can be 0x81 and 0x01, representing
|
|
* endpoint address 0x01 and IN/OUT directions.
|
|
* We map both endpoint addresses to the same device,
|
|
* IN is reading from it, OUT is writing to it.
|
|
*
|
|
* In the if clause above we check whether one
|
|
* of the structs is populated.
|
|
*/
|
|
dev = makedev(UGEN_CDEV_MAJOR,
|
|
UGENMINOR(USBDEVUNIT(sc->sc_dev), endptno));
|
|
vp = SLIST_FIRST(&dev->si_hlist);
|
|
if (vp)
|
|
VOP_REVOKE(vp, REVOKEALL);
|
|
|
|
destroy_dev(dev);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ugenintr(xfer, addr, status)
|
|
usbd_xfer_handle xfer;
|
|
usbd_private_handle addr;
|
|
usbd_status status;
|
|
{
|
|
struct ugen_endpoint *sce = addr;
|
|
/*struct ugen_softc *sc = sce->sc;*/
|
|
u_int32_t count;
|
|
u_char *ibuf;
|
|
|
|
if (status == USBD_CANCELLED)
|
|
return;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
DPRINTF(("ugenintr: status=%d\n", status));
|
|
usbd_clear_endpoint_stall_async(sce->pipeh);
|
|
return;
|
|
}
|
|
|
|
usbd_get_xfer_status(xfer, 0, 0, &count, 0);
|
|
ibuf = sce->ibuf;
|
|
|
|
DPRINTFN(5, ("ugenintr: xfer=%p status=%d count=%d\n",
|
|
xfer, status, count));
|
|
DPRINTFN(5, (" data = %02x %02x %02x\n",
|
|
ibuf[0], ibuf[1], ibuf[2]));
|
|
|
|
(void)b_to_q(ibuf, count, &sce->q);
|
|
|
|
if (sce->state & UGEN_ASLP) {
|
|
sce->state &= ~UGEN_ASLP;
|
|
DPRINTFN(5, ("ugen_intr: waking %p\n", sce));
|
|
wakeup(sce);
|
|
}
|
|
selwakeup(&sce->rsel);
|
|
}
|
|
|
|
static usbd_status
|
|
ugen_set_interface(sc, ifaceidx, altno)
|
|
struct ugen_softc *sc;
|
|
int ifaceidx, altno;
|
|
{
|
|
usbd_interface_handle iface;
|
|
usb_endpoint_descriptor_t *ed;
|
|
usbd_status err;
|
|
struct ugen_endpoint *sce;
|
|
u_int8_t niface, nendpt, endptno, endpt;
|
|
int dir;
|
|
|
|
DPRINTFN(15, ("ugen_set_interface %d %d\n", ifaceidx, altno));
|
|
|
|
err = usbd_interface_count(sc->sc_udev, &niface);
|
|
if (err)
|
|
return (err);
|
|
if (ifaceidx < 0 || ifaceidx >= niface)
|
|
return (USBD_INVAL);
|
|
|
|
err = usbd_device2interface_handle(sc->sc_udev, ifaceidx, &iface);
|
|
if (err)
|
|
return (err);
|
|
err = usbd_endpoint_count(iface, &nendpt);
|
|
if (err)
|
|
return (err);
|
|
for (endptno = 0; endptno < nendpt; endptno++) {
|
|
ed = usbd_interface2endpoint_descriptor(iface,endptno);
|
|
endpt = ed->bEndpointAddress;
|
|
dir = UE_GET_DIR(endpt) == UE_DIR_IN ? IN : OUT;
|
|
sce = &sc->sc_endpoints[UE_GET_ADDR(endpt)][dir];
|
|
sce->sc = 0;
|
|
sce->edesc = 0;
|
|
sce->iface = 0;
|
|
}
|
|
|
|
/* change setting */
|
|
err = usbd_set_interface(iface, altno);
|
|
if (err)
|
|
return (err);
|
|
|
|
err = usbd_endpoint_count(iface, &nendpt);
|
|
if (err)
|
|
return (err);
|
|
for (endptno = 0; endptno < nendpt; endptno++) {
|
|
ed = usbd_interface2endpoint_descriptor(iface,endptno);
|
|
endpt = ed->bEndpointAddress;
|
|
dir = UE_GET_DIR(endpt) == UE_DIR_IN ? IN : OUT;
|
|
sce = &sc->sc_endpoints[UE_GET_ADDR(endpt)][dir];
|
|
sce->sc = sc;
|
|
sce->edesc = ed;
|
|
sce->iface = iface;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/* Retrieve a complete descriptor for a certain device and index. */
|
|
static usb_config_descriptor_t *
|
|
ugen_get_cdesc(sc, index, lenp)
|
|
struct ugen_softc *sc;
|
|
int index;
|
|
int *lenp;
|
|
{
|
|
usb_config_descriptor_t *cdesc, *tdesc, cdescr;
|
|
int len;
|
|
usbd_status err;
|
|
|
|
if (index == USB_CURRENT_CONFIG_INDEX) {
|
|
tdesc = usbd_get_config_descriptor(sc->sc_udev);
|
|
len = UGETW(tdesc->wTotalLength);
|
|
if (lenp)
|
|
*lenp = len;
|
|
cdesc = malloc(len, M_TEMP, M_WAITOK);
|
|
memcpy(cdesc, tdesc, len);
|
|
DPRINTFN(5,("ugen_get_cdesc: current, len=%d\n", len));
|
|
} else {
|
|
err = usbd_get_config_desc(sc->sc_udev, index, &cdescr);
|
|
if (err)
|
|
return (0);
|
|
len = UGETW(cdescr.wTotalLength);
|
|
DPRINTFN(5,("ugen_get_cdesc: index=%d, len=%d\n", index, len));
|
|
if (lenp)
|
|
*lenp = len;
|
|
cdesc = malloc(len, M_TEMP, M_WAITOK);
|
|
err = usbd_get_config_desc_full(sc->sc_udev, index, cdesc, len);
|
|
if (err) {
|
|
free(cdesc, M_TEMP);
|
|
return (0);
|
|
}
|
|
}
|
|
return (cdesc);
|
|
}
|
|
|
|
static int
|
|
ugen_get_alt_index(sc, ifaceidx)
|
|
struct ugen_softc *sc;
|
|
int ifaceidx;
|
|
{
|
|
usbd_interface_handle iface;
|
|
usbd_status err;
|
|
|
|
err = usbd_device2interface_handle(sc->sc_udev, ifaceidx, &iface);
|
|
if (err)
|
|
return (-1);
|
|
return (usbd_get_interface_altindex(iface));
|
|
}
|
|
|
|
static int
|
|
ugen_do_ioctl(sc, endpt, cmd, addr, flag, p)
|
|
struct ugen_softc *sc;
|
|
int endpt;
|
|
u_long cmd;
|
|
caddr_t addr;
|
|
int flag;
|
|
struct proc *p;
|
|
{
|
|
struct ugen_endpoint *sce;
|
|
usbd_status err;
|
|
usbd_interface_handle iface;
|
|
struct usb_config_desc *cd;
|
|
usb_config_descriptor_t *cdesc;
|
|
struct usb_interface_desc *id;
|
|
usb_interface_descriptor_t *idesc;
|
|
struct usb_endpoint_desc *ed;
|
|
usb_endpoint_descriptor_t *edesc;
|
|
struct usb_alt_interface *ai;
|
|
struct usb_string_desc *si;
|
|
u_int8_t conf, alt;
|
|
|
|
DPRINTFN(5, ("ugenioctl: cmd=%08lx\n", cmd));
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
switch (cmd) {
|
|
case FIONBIO:
|
|
/* All handled in the upper FS layer. */
|
|
return (0);
|
|
case USB_SET_SHORT_XFER:
|
|
/* This flag only affects read */
|
|
if (endpt == USB_CONTROL_ENDPOINT)
|
|
return (EINVAL);
|
|
sce = &sc->sc_endpoints[endpt][IN];
|
|
if (sce == NULL)
|
|
return (EINVAL);
|
|
#ifdef DIAGNOSTIC
|
|
if (sce->pipeh == NULL) {
|
|
printf("ugenioctl: USB_SET_SHORT_XFER, no pipe\n");
|
|
return (EIO);
|
|
}
|
|
#endif
|
|
if (*(int *)addr)
|
|
sce->state |= UGEN_SHORT_OK;
|
|
else
|
|
sce->state &= ~UGEN_SHORT_OK;
|
|
return (0);
|
|
case USB_SET_TIMEOUT:
|
|
sce = &sc->sc_endpoints[endpt][IN];
|
|
if (sce == NULL)
|
|
return (EINVAL);
|
|
#ifdef DIAGNOSTIC
|
|
if (sce->pipeh == NULL) {
|
|
printf("ugenioctl: USB_SET_TIMEOUT, no pipe\n");
|
|
return (EIO);
|
|
}
|
|
#endif
|
|
sce->timeout = *(int *)addr;
|
|
return (0);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (endpt != USB_CONTROL_ENDPOINT)
|
|
return (EINVAL);
|
|
|
|
switch (cmd) {
|
|
#ifdef UGEN_DEBUG
|
|
case USB_SETDEBUG:
|
|
ugendebug = *(int *)addr;
|
|
break;
|
|
#endif
|
|
case USB_GET_CONFIG:
|
|
err = usbd_get_config(sc->sc_udev, &conf);
|
|
if (err)
|
|
return (EIO);
|
|
*(int *)addr = conf;
|
|
break;
|
|
case USB_SET_CONFIG:
|
|
if (!(flag & FWRITE))
|
|
return (EPERM);
|
|
err = ugen_set_config(sc, *(int *)addr);
|
|
if (err)
|
|
return (EIO);
|
|
break;
|
|
case USB_GET_ALTINTERFACE:
|
|
ai = (struct usb_alt_interface *)addr;
|
|
err = usbd_device2interface_handle(sc->sc_udev,
|
|
ai->interface_index, &iface);
|
|
if (err)
|
|
return (EINVAL);
|
|
idesc = usbd_get_interface_descriptor(iface);
|
|
if (idesc == NULL)
|
|
return (EIO);
|
|
ai->alt_no = idesc->bAlternateSetting;
|
|
break;
|
|
case USB_SET_ALTINTERFACE:
|
|
if (!(flag & FWRITE))
|
|
return (EPERM);
|
|
ai = (struct usb_alt_interface *)addr;
|
|
err = usbd_device2interface_handle(sc->sc_udev,
|
|
ai->interface_index, &iface);
|
|
if (err)
|
|
return (EINVAL);
|
|
err = ugen_set_interface(sc, ai->interface_index, ai->alt_no);
|
|
if (err)
|
|
return (EINVAL);
|
|
break;
|
|
case USB_GET_NO_ALT:
|
|
ai = (struct usb_alt_interface *)addr;
|
|
cdesc = ugen_get_cdesc(sc, ai->config_index, 0);
|
|
if (cdesc == NULL)
|
|
return (EINVAL);
|
|
idesc = usbd_find_idesc(cdesc, ai->interface_index, 0);
|
|
if (idesc == NULL) {
|
|
free(cdesc, M_TEMP);
|
|
return (EINVAL);
|
|
}
|
|
ai->alt_no = usbd_get_no_alts(cdesc, idesc->bInterfaceNumber);
|
|
free(cdesc, M_TEMP);
|
|
break;
|
|
case USB_GET_DEVICE_DESC:
|
|
*(usb_device_descriptor_t *)addr =
|
|
*usbd_get_device_descriptor(sc->sc_udev);
|
|
break;
|
|
case USB_GET_CONFIG_DESC:
|
|
cd = (struct usb_config_desc *)addr;
|
|
cdesc = ugen_get_cdesc(sc, cd->config_index, 0);
|
|
if (cdesc == NULL)
|
|
return (EINVAL);
|
|
cd->desc = *cdesc;
|
|
free(cdesc, M_TEMP);
|
|
break;
|
|
case USB_GET_INTERFACE_DESC:
|
|
id = (struct usb_interface_desc *)addr;
|
|
cdesc = ugen_get_cdesc(sc, id->config_index, 0);
|
|
if (cdesc == NULL)
|
|
return (EINVAL);
|
|
if (id->config_index == USB_CURRENT_CONFIG_INDEX &&
|
|
id->alt_index == USB_CURRENT_ALT_INDEX)
|
|
alt = ugen_get_alt_index(sc, id->interface_index);
|
|
else
|
|
alt = id->alt_index;
|
|
idesc = usbd_find_idesc(cdesc, id->interface_index, alt);
|
|
if (idesc == NULL) {
|
|
free(cdesc, M_TEMP);
|
|
return (EINVAL);
|
|
}
|
|
id->desc = *idesc;
|
|
free(cdesc, M_TEMP);
|
|
break;
|
|
case USB_GET_ENDPOINT_DESC:
|
|
ed = (struct usb_endpoint_desc *)addr;
|
|
cdesc = ugen_get_cdesc(sc, ed->config_index, 0);
|
|
if (cdesc == NULL)
|
|
return (EINVAL);
|
|
if (ed->config_index == USB_CURRENT_CONFIG_INDEX &&
|
|
ed->alt_index == USB_CURRENT_ALT_INDEX)
|
|
alt = ugen_get_alt_index(sc, ed->interface_index);
|
|
else
|
|
alt = ed->alt_index;
|
|
edesc = usbd_find_edesc(cdesc, ed->interface_index,
|
|
alt, ed->endpoint_index);
|
|
if (edesc == NULL) {
|
|
free(cdesc, M_TEMP);
|
|
return (EINVAL);
|
|
}
|
|
ed->desc = *edesc;
|
|
free(cdesc, M_TEMP);
|
|
break;
|
|
case USB_GET_FULL_DESC:
|
|
{
|
|
int len;
|
|
struct iovec iov;
|
|
struct uio uio;
|
|
struct usb_full_desc *fd = (struct usb_full_desc *)addr;
|
|
int error;
|
|
|
|
cdesc = ugen_get_cdesc(sc, fd->config_index, &len);
|
|
if (len > fd->size)
|
|
len = fd->size;
|
|
iov.iov_base = (caddr_t)fd->data;
|
|
iov.iov_len = len;
|
|
uio.uio_iov = &iov;
|
|
uio.uio_iovcnt = 1;
|
|
uio.uio_resid = len;
|
|
uio.uio_offset = 0;
|
|
uio.uio_segflg = UIO_USERSPACE;
|
|
uio.uio_rw = UIO_READ;
|
|
uio.uio_procp = p;
|
|
#if defined(__NetBSD__) || defined(__OpenBSD__)
|
|
error = uiomove((caddr_t)cdesc, len, &uio);
|
|
#elif defined(__FreeBSD__)
|
|
error = uiomove((void *)cdesc, len, &uio);
|
|
#endif
|
|
free(cdesc, M_TEMP);
|
|
return (error);
|
|
}
|
|
case USB_GET_STRING_DESC:
|
|
si = (struct usb_string_desc *)addr;
|
|
err = usbd_get_string_desc(sc->sc_udev, si->string_index,
|
|
si->language_id, &si->desc);
|
|
if (err)
|
|
return (EINVAL);
|
|
break;
|
|
case USB_DO_REQUEST:
|
|
{
|
|
struct usb_ctl_request *ur = (void *)addr;
|
|
int len = UGETW(ur->request.wLength);
|
|
struct iovec iov;
|
|
struct uio uio;
|
|
void *ptr = 0;
|
|
usbd_status err;
|
|
int error = 0;
|
|
|
|
if (!(flag & FWRITE))
|
|
return (EPERM);
|
|
/* Avoid requests that would damage the bus integrity. */
|
|
if ((ur->request.bmRequestType == UT_WRITE_DEVICE &&
|
|
ur->request.bRequest == UR_SET_ADDRESS) ||
|
|
(ur->request.bmRequestType == UT_WRITE_DEVICE &&
|
|
ur->request.bRequest == UR_SET_CONFIG) ||
|
|
(ur->request.bmRequestType == UT_WRITE_INTERFACE &&
|
|
ur->request.bRequest == UR_SET_INTERFACE))
|
|
return (EINVAL);
|
|
|
|
if (len < 0 || len > 32767)
|
|
return (EINVAL);
|
|
if (len != 0) {
|
|
iov.iov_base = (caddr_t)ur->data;
|
|
iov.iov_len = len;
|
|
uio.uio_iov = &iov;
|
|
uio.uio_iovcnt = 1;
|
|
uio.uio_resid = len;
|
|
uio.uio_offset = 0;
|
|
uio.uio_segflg = UIO_USERSPACE;
|
|
uio.uio_rw =
|
|
ur->request.bmRequestType & UT_READ ?
|
|
UIO_READ : UIO_WRITE;
|
|
uio.uio_procp = p;
|
|
ptr = malloc(len, M_TEMP, M_WAITOK);
|
|
if (uio.uio_rw == UIO_WRITE) {
|
|
error = uiomove(ptr, len, &uio);
|
|
if (error)
|
|
goto ret;
|
|
}
|
|
}
|
|
err = usbd_do_request_flags(sc->sc_udev, &ur->request,
|
|
ptr, ur->flags, &ur->actlen);
|
|
if (err) {
|
|
error = EIO;
|
|
goto ret;
|
|
}
|
|
if (len != 0) {
|
|
if (uio.uio_rw == UIO_READ) {
|
|
error = uiomove(ptr, len, &uio);
|
|
if (error)
|
|
goto ret;
|
|
}
|
|
}
|
|
ret:
|
|
if (ptr)
|
|
free(ptr, M_TEMP);
|
|
return (error);
|
|
}
|
|
case USB_GET_DEVICEINFO:
|
|
usbd_fill_deviceinfo(sc->sc_udev,
|
|
(struct usb_device_info *)addr);
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
ugenioctl(dev, cmd, addr, flag, p)
|
|
dev_t dev;
|
|
u_long cmd;
|
|
caddr_t addr;
|
|
int flag;
|
|
struct proc *p;
|
|
{
|
|
int endpt = UGENENDPOINT(dev);
|
|
struct ugen_softc *sc;
|
|
int error;
|
|
|
|
USB_GET_SC(ugen, UGENUNIT(dev), sc);
|
|
|
|
sc->sc_refcnt++;
|
|
error = ugen_do_ioctl(sc, endpt, cmd, addr, flag, p);
|
|
if (--sc->sc_refcnt < 0)
|
|
usb_detach_wakeup(USBDEV(sc->sc_dev));
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
ugenpoll(dev, events, p)
|
|
dev_t dev;
|
|
int events;
|
|
struct proc *p;
|
|
{
|
|
struct ugen_softc *sc;
|
|
struct ugen_endpoint *sce;
|
|
int revents = 0;
|
|
int s;
|
|
|
|
USB_GET_SC(ugen, UGENUNIT(dev), sc);
|
|
|
|
if (sc->sc_dying)
|
|
return (EIO);
|
|
|
|
/* XXX always IN */
|
|
sce = &sc->sc_endpoints[UGENENDPOINT(dev)][IN];
|
|
if (sce == NULL)
|
|
return (EINVAL);
|
|
#ifdef DIAGNOSTIC
|
|
if (!sce->edesc) {
|
|
printf("ugenwrite: no edesc\n");
|
|
return (EIO);
|
|
}
|
|
if (!sce->pipeh) {
|
|
printf("ugenpoll: no pipe\n");
|
|
return (EIO);
|
|
}
|
|
#endif
|
|
s = splusb();
|
|
switch (sce->edesc->bmAttributes & UE_XFERTYPE) {
|
|
case UE_INTERRUPT:
|
|
if (events & (POLLIN | POLLRDNORM)) {
|
|
if (sce->q.c_cc > 0)
|
|
revents |= events & (POLLIN | POLLRDNORM);
|
|
else
|
|
selrecord(p, &sce->rsel);
|
|
}
|
|
break;
|
|
case UE_BULK:
|
|
/*
|
|
* We have no easy way of determining if a read will
|
|
* yield any data or a write will happen.
|
|
* Pretend they will.
|
|
*/
|
|
revents |= events &
|
|
(POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
splx(s);
|
|
return (revents);
|
|
}
|
|
|
|
#if defined(__FreeBSD__)
|
|
DRIVER_MODULE(ugen, uhub, ugen_driver, ugen_devclass, usbd_driver_load, 0);
|
|
#endif
|