freebsd-skq/share/examples/bhyve/vmrun.sh
allanjude f1ed5f10fd Add UEFI support to vmrun.sh
Adds:
 -E: Use UEFI mode
 -f: path to UEFI firmware image (default: path to uefi-edk2-bhyve package)
 -F: UEFI framebuffer size (default: w=1024,h=768)
 -L: IP to listen for VNC connections on (default: 127.0.0.1)
 -P: Port to listen for VNC connections on (default: 5900)
 -T: Enable tablnet device (for VNC)
 -v: Wait for VNC client before booting VM

Submitted by:	Shawn Webb <shawn.webb@hardenedbsd.org>
MFC after:	2 weeks
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D10378
2017-04-13 00:07:39 +00:00

372 lines
9.1 KiB
Bash
Executable File

#!/bin/sh
#
# Copyright (c) 2013 NetApp, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
#
LOADER=/usr/sbin/bhyveload
BHYVECTL=/usr/sbin/bhyvectl
FBSDRUN=/usr/sbin/bhyve
DEFAULT_MEMSIZE=512M
DEFAULT_CPUS=2
DEFAULT_TAPDEV=tap0
DEFAULT_CONSOLE=stdio
DEFAULT_VIRTIO_DISK="./diskdev"
DEFAULT_ISOFILE="./release.iso"
errmsg() {
echo "*** $1"
}
usage() {
local msg=$1
echo "Usage: vmrun.sh [-aEhiTv] [-c <CPUs>] [-C <console>] [-d <disk file>]"
echo " [-e <name=value>] [-f <path of firmware>] [-F <size>]"
echo " [-g <gdbport> ] [-H <directory>]"
echo " [-I <location of installation iso>] [-l <loader>]"
echo " [-L <VNC IP for UEFI framebuffer>]"
echo " [-m <memsize>] [-P <port>] [-t <tapdev>] <vmname>"
echo ""
echo " -h: display this help message"
echo " -a: force memory mapped local APIC access"
echo " -c: number of virtual cpus (default is ${DEFAULT_CPUS})"
echo " -C: console device (default is ${DEFAULT_CONSOLE})"
echo " -d: virtio diskdev file (default is ${DEFAULT_VIRTIO_DISK})"
echo " -e: set FreeBSD loader environment variable"
echo " -E: Use UEFI mode"
echo " -f: Use a specific UEFI firmware"
echo " -F: Use a custom UEFI GOP framebuffer size (default: w=1024,h=768)"
echo " -g: listen for connection from kgdb at <gdbport>"
echo " -H: host filesystem to export to the loader"
echo " -i: force boot of the Installation CDROM image"
echo " -I: Installation CDROM image location (default is ${DEFAULT_ISOFILE})"
echo " -l: the OS loader to use (default is /boot/userboot.so)"
echo " -L: IP address for UEFI GOP VNC server (default: 127.0.0.1)"
echo " -m: memory size (default is ${DEFAULT_MEMSIZE})"
echo " -p: pass-through a host PCI device at bus/slot/func (e.g. 10/0/0)"
echo " -P: UEFI GOP VNC port (default: 5900)"
echo " -t: tap device for virtio-net (default is $DEFAULT_TAPDEV)"
echo " -T: Enable tablet device (for UEFI GOP)"
echo " -u: RTC keeps UTC time"
echo " -v: Wait for VNC client connection before booting VM"
echo " -w: ignore unimplemented MSRs"
echo ""
[ -n "$msg" ] && errmsg "$msg"
exit 1
}
if [ `id -u` -ne 0 ]; then
errmsg "This script must be executed with superuser privileges"
exit 1
fi
kldstat -n vmm > /dev/null 2>&1
if [ $? -ne 0 ]; then
errmsg "vmm.ko is not loaded"
exit 1
fi
force_install=0
isofile=${DEFAULT_ISOFILE}
memsize=${DEFAULT_MEMSIZE}
console=${DEFAULT_CONSOLE}
cpus=${DEFAULT_CPUS}
tap_total=0
disk_total=0
gdbport=0
loader_opt=""
bhyverun_opt="-H -A -P"
pass_total=0
# EFI-specific options
efi_mode=0
efi_firmware="/usr/local/share/uefi-firmware/BHYVE_UEFI.fd"
vncwait=""
vnchost="127.0.0.1"
vncport=5900
fbsize="w=1024,h=768"
tablet=""
while getopts ac:C:d:e:Ef:F:g:hH:iI:l:m:p:P:t:Tuvw c ; do
case $c in
a)
bhyverun_opt="${bhyverun_opt} -a"
;;
c)
cpus=${OPTARG}
;;
C)
console=${OPTARG}
;;
d)
disk_dev=${OPTARG%%,*}
disk_opts=${OPTARG#${disk_dev}}
eval "disk_dev${disk_total}=\"${disk_dev}\""
eval "disk_opts${disk_total}=\"${disk_opts}\""
disk_total=$(($disk_total + 1))
;;
e)
loader_opt="${loader_opt} -e ${OPTARG}"
;;
E)
efi_mode=1
;;
f)
efi_firmware="${OPTARG}"
;;
F)
fbsize="${OPTARG}"
;;
g)
gdbport=${OPTARG}
;;
H)
host_base=`realpath ${OPTARG}`
;;
i)
force_install=1
;;
I)
isofile=${OPTARG}
;;
l)
loader_opt="${loader_opt} -l ${OPTARG}"
;;
L)
vnchost="${OPTARG}"
;;
m)
memsize=${OPTARG}
;;
p)
eval "pass_dev${pass_total}=\"${OPTARG}\""
pass_total=$(($pass_total + 1))
;;
P)
vncport="${OPTARG}"
;;
t)
eval "tap_dev${tap_total}=\"${OPTARG}\""
tap_total=$(($tap_total + 1))
;;
T)
tablet="-s 30,xhci,tablet"
;;
u)
bhyverun_opt="${bhyverun_opt} -u"
;;
v)
vncwait=",wait"
;;
w)
bhyverun_opt="${bhyverun_opt} -w"
;;
*)
usage
;;
esac
done
if [ $tap_total -eq 0 ] ; then
tap_total=1
tap_dev0="${DEFAULT_TAPDEV}"
fi
if [ $disk_total -eq 0 ] ; then
disk_total=1
disk_dev0="${DEFAULT_VIRTIO_DISK}"
fi
shift $((${OPTIND} - 1))
if [ $# -ne 1 ]; then
usage "virtual machine name not specified"
fi
vmname="$1"
if [ -n "${host_base}" ]; then
loader_opt="${loader_opt} -h ${host_base}"
fi
# If PCI passthru devices are configured then guest memory must be wired
if [ ${pass_total} -gt 0 ]; then
loader_opt="${loader_opt} -S"
bhyverun_opt="${bhyverun_opt} -S"
fi
if [ ${efi_mode} -gt 0 ]; then
if [ ! -f ${efi_firmware} ]; then
echo "Error: EFI Firmware ${efi_firmware} doesn't exist. Try: pkg install uefi-edk2-bhyve"
exit 1
fi
fi
make_and_check_diskdev()
{
local virtio_diskdev="$1"
# Create the virtio diskdev file if needed
if [ ! -e ${virtio_diskdev} ]; then
echo "virtio disk device file \"${virtio_diskdev}\" does not exist."
echo "Creating it ..."
truncate -s 8G ${virtio_diskdev} > /dev/null
fi
if [ ! -r ${virtio_diskdev} ]; then
echo "virtio disk device file \"${virtio_diskdev}\" is not readable"
exit 1
fi
if [ ! -w ${virtio_diskdev} ]; then
echo "virtio disk device file \"${virtio_diskdev}\" is not writable"
exit 1
fi
}
echo "Launching virtual machine \"$vmname\" ..."
first_diskdev="$disk_dev0"
${BHYVECTL} --vm=${vmname} --destroy > /dev/null 2>&1
while [ 1 ]; do
file -s ${first_diskdev} | grep "boot sector" > /dev/null
rc=$?
if [ $rc -ne 0 ]; then
file -s ${first_diskdev} | grep ": Unix Fast File sys" > /dev/null
rc=$?
fi
if [ $rc -ne 0 ]; then
need_install=1
else
need_install=0
fi
if [ $force_install -eq 1 -o $need_install -eq 1 ]; then
if [ ! -r ${isofile} ]; then
echo -n "Installation CDROM image \"${isofile}\" "
echo "is not readable"
exit 1
fi
BOOTDISKS="-d ${isofile}"
installer_opt="-s 31:0,ahci-cd,${isofile}"
else
BOOTDISKS=""
i=0
while [ $i -lt $disk_total ] ; do
eval "disk=\$disk_dev${i}"
if [ -r ${disk} ] ; then
BOOTDISKS="$BOOTDISKS -d ${disk} "
fi
i=$(($i + 1))
done
installer_opt=""
fi
if [ ${efi_mode} -eq 0 ]; then
${LOADER} -c ${console} -m ${memsize} ${BOOTDISKS} ${loader_opt} \
${vmname}
bhyve_exit=$?
if [ $bhyve_exit -ne 0 ]; then
break
fi
fi
#
# Build up args for additional tap and disk devices now.
#
nextslot=2 # slot 0 is hostbridge, slot 1 is lpc
devargs="" # accumulate disk/tap args here
i=0
while [ $i -lt $tap_total ] ; do
eval "tapname=\$tap_dev${i}"
devargs="$devargs -s $nextslot:0,virtio-net,${tapname} "
nextslot=$(($nextslot + 1))
i=$(($i + 1))
done
i=0
while [ $i -lt $disk_total ] ; do
eval "disk=\$disk_dev${i}"
eval "opts=\$disk_opts${i}"
make_and_check_diskdev "${disk}"
devargs="$devargs -s $nextslot:0,virtio-blk,${disk}${opts} "
nextslot=$(($nextslot + 1))
i=$(($i + 1))
done
i=0
while [ $i -lt $pass_total ] ; do
eval "pass=\$pass_dev${i}"
devargs="$devargs -s $nextslot:0,passthru,${pass} "
nextslot=$(($nextslot + 1))
i=$(($i + 1))
done
efiargs=""
if [ ${efi_mode} -gt 0 ]; then
efiargs="-s 29,fbuf,tcp=${vnchost}:${vncport},${fbsize}${vncwait}"
efiargs="${efiargs} -l bootrom,${efi_firmware}"
efiargs="${efiargs} ${tablet}"
fi
${FBSDRUN} -c ${cpus} -m ${memsize} ${bhyverun_opt} \
-g ${gdbport} \
-s 0:0,hostbridge \
-s 1:0,lpc \
${efiargs} \
${devargs} \
-l com1,${console} \
${installer_opt} \
${vmname}
bhyve_exit=$?
# bhyve returns the following status codes:
# 0 - VM has been reset
# 1 - VM has been powered off
# 2 - VM has been halted
# 3 - VM generated a triple fault
# all other non-zero status codes are errors
#
if [ $bhyve_exit -ne 0 ]; then
break
fi
done
case $bhyve_exit in
0|1|2)
# Cleanup /dev/vmm entry when bhyve did not exit
# due to an error.
${BHYVECTL} --vm=${vmname} --destroy > /dev/null 2>&1
;;
esac
exit $bhyve_exit