freebsd-skq/sys/dev/ath/if_ath_tx.h
adrian 9c9f0d74e1 net80211: separate mbuf cleanup from ieee80211_fragment()
* Create ieee80211_free_mbuf() which frees a list of mbufs.
* Use it in the fragment transmit path and ath / uath transmit paths.
* Call it in xmit_pkt() if the transmission fails; otherwise fragments
  may be leaked.

This should be a big no-op.

Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3769
2015-10-12 03:27:08 +00:00

169 lines
6.0 KiB
C

/*-
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD$
*/
#ifndef __IF_ATH_TX_H__
#define __IF_ATH_TX_H__
/*
* some general macros
*/
#define INCR(_l, _sz) (_l) ++; (_l) &= ((_sz) - 1)
/*
* return block-ack bitmap index given sequence and starting sequence
*/
#define ATH_BA_INDEX(_st, _seq) (((_seq) - (_st)) & (IEEE80211_SEQ_RANGE - 1))
#define WME_BA_BMP_SIZE 64
#define WME_MAX_BA WME_BA_BMP_SIZE
/*
* How 'busy' to try and keep the hardware txq
*/
#define ATH_AGGR_MIN_QDEPTH 2
#define ATH_NONAGGR_MIN_QDEPTH 32
/*
* Watermark for scheduling TIDs in order to maximise aggregation.
*
* If hwq_depth is greater than this, don't schedule the TID
* for packet scheduling - the hardware is already busy servicing
* this TID.
*
* If hwq_depth is less than this, schedule the TID for packet
* scheduling in the completion handler.
*/
#define ATH_AGGR_SCHED_HIGH 4
#define ATH_AGGR_SCHED_LOW 2
/*
* return whether a bit at index _n in bitmap _bm is set
* _sz is the size of the bitmap
*/
#define ATH_BA_ISSET(_bm, _n) (((_n) < (WME_BA_BMP_SIZE)) && \
((_bm)[(_n) >> 5] & (1 << ((_n) & 31))))
/* extracting the seqno from buffer seqno */
#define SEQNO(_a) ((_a) >> IEEE80211_SEQ_SEQ_SHIFT)
/*
* Whether the current sequence number is within the
* BAW.
*/
#define BAW_WITHIN(_start, _bawsz, _seqno) \
((((_seqno) - (_start)) & 4095) < (_bawsz))
/*
* Maximum aggregate size
*/
#define ATH_AGGR_MAXSIZE 65530
extern void ath_tx_node_flush(struct ath_softc *sc, struct ath_node *an);
extern void ath_tx_txq_drain(struct ath_softc *sc, struct ath_txq *txq);
extern void ath_txfrag_cleanup(struct ath_softc *sc, ath_bufhead *frags,
struct ieee80211_node *ni);
extern int ath_txfrag_setup(struct ath_softc *sc, ath_bufhead *frags,
struct mbuf *m0, struct ieee80211_node *ni);
extern int ath_tx_start(struct ath_softc *sc, struct ieee80211_node *ni,
struct ath_buf *bf, struct mbuf *m0);
extern int ath_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_bpf_params *params);
/* software queue stuff */
extern void ath_tx_swq(struct ath_softc *sc, struct ieee80211_node *ni,
struct ath_txq *txq, int queue_to_head, struct ath_buf *bf);
extern void ath_tx_tid_init(struct ath_softc *sc, struct ath_node *an);
extern void ath_tx_tid_hw_queue_aggr(struct ath_softc *sc, struct ath_node *an,
struct ath_tid *tid);
extern void ath_tx_tid_hw_queue_norm(struct ath_softc *sc, struct ath_node *an,
struct ath_tid *tid);
extern void ath_txq_sched(struct ath_softc *sc, struct ath_txq *txq);
extern void ath_tx_normal_comp(struct ath_softc *sc, struct ath_buf *bf,
int fail);
extern void ath_tx_aggr_comp(struct ath_softc *sc, struct ath_buf *bf,
int fail);
extern void ath_tx_addto_baw(struct ath_softc *sc, struct ath_node *an,
struct ath_tid *tid, struct ath_buf *bf);
extern struct ieee80211_tx_ampdu * ath_tx_get_tx_tid(struct ath_node *an,
int tid);
extern void ath_tx_tid_sched(struct ath_softc *sc, struct ath_tid *tid);
/* TX addba handling */
extern int ath_addba_request(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap, int dialogtoken,
int baparamset, int batimeout);
extern int ath_addba_response(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap, int dialogtoken,
int code, int batimeout);
extern void ath_addba_stop(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap);
extern void ath_bar_response(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap, int status);
extern void ath_addba_response_timeout(struct ieee80211_node *ni,
struct ieee80211_tx_ampdu *tap);
/*
* AP mode power save handling (of stations)
*/
extern void ath_tx_node_sleep(struct ath_softc *sc, struct ath_node *an);
extern void ath_tx_node_wakeup(struct ath_softc *sc, struct ath_node *an);
extern int ath_tx_node_is_asleep(struct ath_softc *sc, struct ath_node *an);
extern void ath_tx_node_reassoc(struct ath_softc *sc, struct ath_node *an);
/*
* Hardware queue stuff
*/
extern void ath_tx_push_pending(struct ath_softc *sc, struct ath_txq *txq);
/*
* Misc debugging stuff
*/
#ifdef ATH_DEBUG_ALQ
extern void ath_tx_alq_post(struct ath_softc *sc, struct ath_buf *bf_first);
#endif /* ATH_DEBUG_ALQ */
/*
* Setup path
*/
#define ath_txdma_setup(_sc) \
(_sc)->sc_tx.xmit_setup(_sc)
#define ath_txdma_teardown(_sc) \
(_sc)->sc_tx.xmit_teardown(_sc)
#define ath_txq_restart_dma(_sc, _txq) \
(_sc)->sc_tx.xmit_dma_restart((_sc), (_txq))
#define ath_tx_handoff(_sc, _txq, _bf) \
(_sc)->sc_tx.xmit_handoff((_sc), (_txq), (_bf))
#define ath_draintxq(_sc, _rtype) \
(_sc)->sc_tx.xmit_drain((_sc), (_rtype))
extern void ath_xmit_setup_legacy(struct ath_softc *sc);
#endif