d68875eb7e
controller. These controllers are also known as L1C(AR8131) and L2C(AR8132) respectively. These controllers resembles the first generation controller L1 but usage of different descriptor format and new register mappings over L1 register space requires a new driver. There are a couple of registers I still don't understand but the driver seems to have no critical issues for performance and stability. Currently alc(4) supports the following hardware features. o MSI o TCP Segmentation offload o Hardware VLAN tag insertion/stripping o Tx/Rx interrupt moderation o Hardware statistics counters(dev.alc.%d.stats) o Jumbo frame o WOL AR8131/AR8132 also supports Tx checksum offloading but I disabled it due to stability issues. I'm not sure this comes from broken sample boards or hardware bugs. If you know your controller works without problems you can still enable it. The controller has a silicon bug for Rx checksum offloading, so the feature was not implemented. I'd like to say big thanks to Atheros. Atheros kindly sent sample boards to me and answered several questions I had. HW donated by: Atheros Communications, Inc.
449 lines
20 KiB
Plaintext
449 lines
20 KiB
Plaintext
# This is loader.conf - a file full of useful variables that you can
|
|
# set to change the default load behavior of your system. You should
|
|
# not edit this file! Put any overrides into one of the
|
|
# loader_conf_files instead and you will be able to update these
|
|
# defaults later without spamming your local configuration information.
|
|
#
|
|
# All arguments must be in double quotes.
|
|
#
|
|
# $FreeBSD$
|
|
|
|
##############################################################
|
|
### Basic configuration options ############################
|
|
##############################################################
|
|
|
|
exec=".( Loading /boot/defaults/loader.conf ) cr"
|
|
|
|
kernel="kernel" # /boot sub-directory containing kernel and modules
|
|
bootfile="kernel" # Kernel name (possibly absolute path)
|
|
kernel_options="" # Flags to be passed to the kernel
|
|
|
|
loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local"
|
|
nextboot_conf="/boot/nextboot.conf"
|
|
nextboot_enable="NO"
|
|
|
|
verbose_loading="NO" # Set to YES for verbose loader output
|
|
|
|
|
|
##############################################################
|
|
### Splash screen configuration ############################
|
|
##############################################################
|
|
|
|
splash_bmp_load="NO" # Set this to YES for bmp splash screen!
|
|
splash_pcx_load="NO" # Set this to YES for pcx splash screen!
|
|
vesa_load="NO" # Set this to YES to load the vesa module
|
|
bitmap_load="NO" # Set this to YES if you want splash screen!
|
|
bitmap_name="splash.bmp" # Set this to the name of the bmp or pcx file
|
|
bitmap_type="splash_image_data" # and place it on the module_path
|
|
|
|
|
|
##############################################################
|
|
### Loader settings ########################################
|
|
##############################################################
|
|
|
|
#autoboot_delay="10" # Delay in seconds before autobooting,
|
|
# set to -1 if you don't want user to be
|
|
# allowed to interrupt autoboot process and
|
|
# escape to the loader prompt, set to
|
|
# "NO" to disable autobooting
|
|
#beastie_disable="NO" # Turn the beastie boot menu on and off
|
|
#loader_logo="fbsdbw" # Desired logo: fbsdbw, beastiebw, beastie, none
|
|
#comconsole_speed="9600" # Set the current serial console speed
|
|
#console="vidconsole" # A comma separated list of console(s)
|
|
#currdev="disk1s1a" # Set the current device
|
|
module_path="/boot/modules" # Set the module search path
|
|
#prompt="\\${interpret}" # Set the command prompt
|
|
#root_disk_unit="0" # Force the root disk unit number
|
|
#rootdev="disk1s1a" # Set the root filesystem
|
|
|
|
|
|
##############################################################
|
|
### Kernel settings ########################################
|
|
##############################################################
|
|
|
|
# The following boot_ variables are enabled by setting them to any value.
|
|
# Their presence in the kernel environment (see kenv(1)) has the same
|
|
# effect as setting the given boot flag (see boot(8)).
|
|
|
|
#boot_askname="" # -a: Prompt the user for the name of the root device
|
|
#boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM
|
|
#boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger
|
|
#boot_dfltroot="" # -r: Use the statically configured root file system
|
|
#boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger
|
|
#boot_multicons="" # -D: Use multiple consoles
|
|
#boot_mute="" # -m: Mute the console
|
|
#boot_pause="" # -p: Pause after each line during device probing
|
|
#boot_serial="" # -h: Use serial console
|
|
#boot_single="" # -s: Start system in single-user mode
|
|
#boot_verbose="" # -v: Causes extra debugging information to be printed
|
|
#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init:/stand/sysinstall"
|
|
# Sets the list of init candidates
|
|
#init_shell="/bin/sh" # The shell binary used by init(8).
|
|
#init_script="" # Initial script to run by init(8) before chrooting.
|
|
#init_chroot="" # Directory for init(8) to chroot into.
|
|
|
|
|
|
##############################################################
|
|
### Kernel tunables ########################################
|
|
##############################################################
|
|
|
|
#hw.physmem="1G" # Limit physical memory. See loader(8)
|
|
#kern.dfldsiz="" # Set the initial data size limit
|
|
#kern.dflssiz="" # Set the initial stack size limit
|
|
#kern.hz="100" # Set the kernel interval timer rate
|
|
#kern.maxbcache="" # Set the max buffer cache KVA storage
|
|
#kern.maxdsiz="" # Set the max data size
|
|
#kern.maxfiles="" # Set the sys. wide open files limit
|
|
#kern.maxproc="" # Set the maximum # of processes
|
|
#kern.maxssiz="" # Set the max stack size
|
|
#kern.maxswzone="" # Set the max swmeta KVA storage
|
|
#kern.maxtsiz="" # Set the max text size
|
|
#kern.maxusers="32" # Set size of various static tables
|
|
#kern.nbuf="" # Set the number of buffer headers
|
|
#kern.ncallout="" # Set the maximum # of timer events
|
|
#kern.sgrowsiz="" # Set the amount to grow stack
|
|
#kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI
|
|
#kern.ipc.maxsockets="" # Set the maximum number of sockets avaliable
|
|
#kern.ipc.nmbclusters="" # Set the number of mbuf clusters
|
|
#kern.ipc.nmbufs="" # Set the maximum number of mbufs
|
|
#kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs
|
|
#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE
|
|
#vfs.root.mountfrom="" # Specify root partition in a way the
|
|
# kernel understands
|
|
#vm.kmem_size="" # Sets the size of kernel memory (bytes)
|
|
#debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on
|
|
#debug.ktr.mask="0x1200" # Bitmask of KTR events to enable
|
|
#debug.ktr.verbose="1" # Enable console dump of KTR events
|
|
#net.graph.maxalloc="128" # Maximum number of queue items to allocate
|
|
|
|
|
|
##############################################################
|
|
### Filesystem and related modules #########################
|
|
##############################################################
|
|
|
|
# Filesystems
|
|
|
|
cd9660_load="NO" # ISO 9660 filesystem
|
|
coda_load="NO" # CODA filesystem
|
|
fdescfs_load="NO" # Filedescriptors filesystem
|
|
linprocfs_load="NO" # Linux compatibility process filesystem
|
|
linsysfs_load="NO" # Linux compatibility system filesystem
|
|
msdosfs_load="NO" # FAT-12/16/32
|
|
nfsclient_load="NO" # NFS client
|
|
nfsserver_load="NO" # NFS server
|
|
ntfs_load="NO" # NTFS
|
|
nullfs_load="NO" # Null filesystem
|
|
portalfs_load="NO" # Portal filesystem
|
|
procfs_load="NO" # Process filesystem
|
|
reiserfs_load="NO" # ReiserFS
|
|
unionfs_load="NO" # Union filesystem
|
|
xfs_load="NO" # XFS
|
|
zfs_load="NO" # ZFS
|
|
|
|
# Related stuff
|
|
|
|
geom_bde_load="NO" # Disk encryption driver (see gbde(4,8))
|
|
geom_ccd_load="NO" # Concatenated disk driver (see ccd(4),
|
|
# ccdconfig(8))
|
|
geom_concat_load="NO" # Concatenated disk driver (see gconcat(8))
|
|
geom_eli_load="NO" # Disk encryption driver (see geli(8))
|
|
geom_gate_load="NO" # Userland disk driver (see geom_gate(4),
|
|
# ggatec(8), ggated(8), ggatel(8))
|
|
geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8))
|
|
geom_label_load="NO" # File system labels (see glabel(8))
|
|
geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see
|
|
# md(4), mdconfig(8))
|
|
geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8))
|
|
geom_nop_load="NO" # Transparent disk driver (see gnop(8))
|
|
geom_raid3_load="NO" # RAID3 disk driver (see graid3(8))
|
|
geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8))
|
|
geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8))
|
|
geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8))
|
|
geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4))
|
|
|
|
|
|
##############################################################
|
|
### Screen saver modules ###################################
|
|
##############################################################
|
|
|
|
# This is best done in rc.conf
|
|
|
|
screensave_load="NO" # Set to YES to load a screensaver module
|
|
screensave_name="green_saver" # Set to the name of the screensaver module
|
|
|
|
|
|
##############################################################
|
|
### Emulation modules ######################################
|
|
##############################################################
|
|
|
|
ibcs2_load="NO" # IBCS2 (SCO) emulation
|
|
ibcs2_coff_load="NO"
|
|
linux_load="NO" # Linux emulation
|
|
svr4_load="NO" # SystemV R4 emulation
|
|
streams_load="NO" # System V streams module
|
|
|
|
|
|
##############################################################
|
|
### Networking modules #####################################
|
|
##############################################################
|
|
|
|
if_disc_load="NO" # Discard device
|
|
if_ef_load="NO" # pseudo-device providing support for multiple
|
|
# ethernet frame types
|
|
if_faith_load="NO" # IPv6-to-IPv4 TCP relay capturing interface
|
|
if_gif_load="NO" # generic tunnel interface
|
|
if_gre_load="NO" # encapsulating network device
|
|
if_ppp_load="NO" # Kernel ppp
|
|
if_sl_load="NO" # SLIP
|
|
if_stf_load="NO" # 6to4 tunnel interface
|
|
if_tap_load="NO" # Ethernet tunnel software network interface
|
|
if_tun_load="NO" # Tunnel driver (user process ppp)
|
|
if_vlan_load="NO" # IEEE 802.1Q VLAN network interface
|
|
ipfw_load="NO" # Firewall
|
|
pf_load="NO" # packet filter
|
|
|
|
|
|
##############################################################
|
|
### Networking drivers #####################################
|
|
##############################################################
|
|
|
|
miibus_load="NO" # miibus support, needed for some drivers
|
|
if_ae_load="NO" # Attansic/Atheros L2 FastEthernet
|
|
if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet
|
|
if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet
|
|
if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet
|
|
if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs
|
|
if_ar_load="NO" # Digi SYNC/570i
|
|
if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs
|
|
if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet
|
|
if_awi_load="NO" # AMD PCnetMobile IEEE 802.11 wireless NICs
|
|
if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet
|
|
if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet
|
|
if_bfe_load="NO" # Broadcom BCM4401
|
|
if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet
|
|
if_cm_load="NO" # SMC (90c26, 90c56, 90c66)
|
|
if_cs_load="NO" # Crystal Semiconductor CS8920
|
|
if_cue_load="NO" # CATC USB-EL1210A USB Ethernet
|
|
if_dc_load="NO" # DEC/Intel 21143 and various workalikes
|
|
if_de_load="NO" # DEC DC21x4x Ethernet
|
|
if_ed_load="NO" # National Semiconductor DS8390/WD83C690
|
|
# Ethernet
|
|
if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet
|
|
if_en_load="NO" # Midway-based ATM interfaces
|
|
if_ep_load="NO" # 3Com Etherlink III (3c5x9)
|
|
if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet
|
|
if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet
|
|
# adapters
|
|
if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558)
|
|
if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC
|
|
if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet
|
|
if_ie_load="NO" # Intel 82586
|
|
if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet
|
|
if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless
|
|
if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG
|
|
# wireless
|
|
if_ixgb_load="NO" # Intel PRO/10Gb Ethernet
|
|
if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express
|
|
if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
|
|
if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet
|
|
if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit
|
|
# Ethernet
|
|
if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless
|
|
# adapter
|
|
if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet
|
|
if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet
|
|
if_my_load="NO" # Myson PCI Fast Ethernet
|
|
if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter
|
|
if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet
|
|
if_nve_load="NO" # NVIDIA nForce MCP Networking Adapter
|
|
if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet
|
|
if_pcn_load="NO" # AMD PCnet PCI
|
|
if_ral_load="NO" # Ralink Technology wireless
|
|
if_ray_load="NO" # Raytheon Raylink/Webgear Aviator PCCard
|
|
if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S
|
|
if_rl_load="NO" # RealTek 8129/8139
|
|
if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet
|
|
if_sbni_load="NO" # Granch SBNI12 leased line adapters
|
|
if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
|
|
if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
|
|
if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet
|
|
if_sn_load="NO" # SMC 91Cxx
|
|
if_sr_load="NO" # synchronous RISCom/N2 / WANic 400/405
|
|
if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet
|
|
if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet
|
|
if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2
|
|
if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN")
|
|
if_tx_load="NO" # SMC 83c17x Fast Ethernet
|
|
if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990)
|
|
if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet
|
|
if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX
|
|
if_udav_load="NO" # Davicom DM9601 USB Ethernet
|
|
if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless
|
|
if_ural_load="NO" # Ralink Technology USB wireless
|
|
if_urtw_load="NO" # Realtek 8187L USB wireless
|
|
if_vr_load="NO" # VIA Rhine I and Rhine II
|
|
if_vx_load="NO" # 3Com 3C590 family
|
|
if_wb_load="NO" # Winbond W89C840F
|
|
if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs
|
|
if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11
|
|
if_xe_load="NO" # Xircom CreditCard PCMCIA
|
|
if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B)
|
|
|
|
##############################################################
|
|
### Netgraph modules #######################################
|
|
##############################################################
|
|
|
|
ng_UI_load="NO" # UI netgraph node type
|
|
ng_async_load="NO" # asynchronous framing netgraph node type
|
|
ng_bpf_load="NO" # Berkeley packet filter netgraph node type
|
|
ng_bridge_load="NO" # Ethernet bridging netgraph node type
|
|
ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type
|
|
ng_echo_load="NO" # Netgraph echo node type
|
|
ng_eiface_load="NO" # generic Ethernet interface netgraph node type
|
|
ng_etf_load="NO" # Ethertype filtering netgraph node type
|
|
ng_ether_load="NO" # Ethernet netgraph node type
|
|
ng_fec_load="NO" # netgraph Fast EtherChannel node
|
|
ng_frame_relay_load="NO" # frame relay netgraph node type
|
|
ng_gif_load="NO" # generic tunnel interface netgraph node type
|
|
ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes
|
|
ng_hole_load="NO" # Netgraph discard node type
|
|
ng_hub_load="NO" # packet distribution netgraph node type
|
|
ng_iface_load="NO" # interface Netgraph node type
|
|
ng_ip_input_load="NO" # netgraph IP input node type
|
|
ng_ksocket_load="NO" # kernel socket netgraph node type
|
|
ng_l2tp_load="NO" # L2TP protocol netgraph node type
|
|
ng_lmi_load="NO" # frame relay LMI protocol netgraph node type
|
|
ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and
|
|
# encryption netgraph node type
|
|
ng_netflow_load="NO" # Cisco's NetFlow netgraph node type
|
|
ng_one2many_load="NO" # packet multiplexing netgraph node type
|
|
ng_ppp_load="NO" # PPP protocol netgraph node type
|
|
ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type
|
|
ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type
|
|
ng_rfc1490_load="NO" # RFC 1490 netgraph node type
|
|
ng_socket_load="NO" # Netgraph socket node type
|
|
ng_split_load="NO" # netgraph node to separate incoming and
|
|
# outgoing flows
|
|
ng_sppp_load="NO" # sppp netgraph node type
|
|
ng_tee_load="NO" # Netgraph ``tee'' node type
|
|
ng_tty_load="NO" # Netgraph node type that is also a line
|
|
# discipline
|
|
ng_vjc_load="NO" # Van Jacobsen compression netgraph node type
|
|
ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type
|
|
|
|
##############################################################
|
|
### Sound modules ##########################################
|
|
##############################################################
|
|
|
|
sound_load="NO" # Digital sound subsystem
|
|
snd_ad1816_load="NO" # ad1816
|
|
snd_als4000_load="NO" # als4000
|
|
snd_atiixp_load="NO" # atiixp
|
|
snd_cmi_load="NO" # cmi
|
|
snd_cs4281_load="NO" # cs4281
|
|
snd_csa_load="NO" # csa
|
|
snd_ds1_load="NO" # ds1
|
|
snd_emu10k1_load="NO" # Creative Sound Blaster Live
|
|
snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy
|
|
snd_envy24_load="NO" # VIA Envy24
|
|
snd_envy24ht_load="NO" # VIA Envy24HT
|
|
snd_es137x_load="NO" # es137x
|
|
snd_ess_load="NO" # ess
|
|
snd_fm801_load="NO" # fm801
|
|
snd_hda_load="NO" # Intel High Definition Audio (Controller)
|
|
snd_ich_load="NO" # Intel ICH
|
|
snd_maestro_load="NO" # Maestro
|
|
snd_maestro3_load="NO" # Maestro3
|
|
snd_mss_load="NO" # Mss
|
|
snd_neomagic_load="NO" # Neomagic
|
|
snd_sb16_load="NO" # Sound Blaster 16
|
|
snd_sb8_load="NO" # Sound Blaster Pro
|
|
snd_sbc_load="NO" # Sbc
|
|
snd_solo_load="NO" # Solo
|
|
snd_spicds_load="NO" # SPI codecs
|
|
snd_t4dwave_load="NO" # t4dwave
|
|
snd_via8233_load="NO" # via8233
|
|
snd_via82c686_load="NO" # via82c686
|
|
snd_vibes_load="NO" # vibes
|
|
snd_driver_load="NO" # All sound drivers
|
|
|
|
##############################################################
|
|
### USB modules ############################################
|
|
##############################################################
|
|
|
|
usb_load="NO" # USB subsystem
|
|
udbp_load="NO" # USB double bulk pipe host 2 host cables
|
|
ugen_load="NO" # USB generic device, if all else fails ...
|
|
ufm_load="NO" # Fm Radio
|
|
uhid_load="NO" # Human Interface Devices
|
|
ukbd_load="NO" # Keyboard
|
|
ulpt_load="NO" # Printer
|
|
ums_load="NO" # Mouse
|
|
umass_load="NO" # Mass Storage Devices
|
|
umodem_load="NO" # Modems
|
|
if_aue_load="NO" # ADMtek USB ethernet
|
|
if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet
|
|
if_cue_load="NO" # CATC USB ethernet
|
|
if_kue_load="NO" # Kawasaki LSI USB ethernet
|
|
if_rum_load="NO" # Ralink USB 802.11 wireless adapter
|
|
if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter
|
|
if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter
|
|
snd_uaudio_load="NO" # USB audio
|
|
|
|
##############################################################
|
|
### Other modules ##########################################
|
|
##############################################################
|
|
|
|
bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card
|
|
ispfw_load="NO" # Qlogic ISP Firmware
|
|
agp_load="NO" # agp module
|
|
accf_data_load="NO" # Wait for data accept filter
|
|
accf_dns_load="NO" # Wait for full DNS request accept filter
|
|
accf_http_load="NO" # Wait for full HTTP request accept filter
|
|
random_load="NO" # Random device
|
|
speaker_load="NO" # AT speaker module
|
|
coretemp_load="NO" # Intel Core CPU temperature monitor
|
|
amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor
|
|
|
|
##############################################################
|
|
### ACPI settings ##########################################
|
|
##############################################################
|
|
|
|
acpi_dsdt_load="NO" # DSDT Overriding
|
|
acpi_dsdt_type="acpi_dsdt" # Don't change this
|
|
acpi_dsdt_name="/boot/acpi_dsdt.aml"
|
|
# Override DSDT in BIOS by this file
|
|
acpi_video_load="NO" # Load the ACPI video extension driver
|
|
|
|
##############################################################
|
|
### TrustedBSD MAC settings ##################################
|
|
##############################################################
|
|
|
|
mac_biba_load="NO" # Biba MAC policy
|
|
mac_bsdextended_load="NO" # BSD/extended MAC policy
|
|
mac_ifoff="NO" # Interface silencing policy
|
|
mac_mls_load="NO" # MLS MAC policy
|
|
mac_none_load="NO" # Null MAC policy
|
|
mac_partition_load="NO" # Partition MAC policy
|
|
mac_seeotheruids_load="NO" # UID visbility MAC policy
|
|
|
|
##############################################################
|
|
### Module loading syntax example ##########################
|
|
##############################################################
|
|
|
|
#module_load="YES" # loads module "module"
|
|
#module_name="realname" # uses "realname" instead of "module"
|
|
#module_type="type" # passes "-t type" to load
|
|
#module_flags="flags" # passes "flags" to the module
|
|
#module_before="cmd" # executes "cmd" before loading the module
|
|
#module_after="cmd" # executes "cmd" after loading the module
|
|
#module_error="cmd" # executes "cmd" if load fails
|
|
|
|
##############################################################
|
|
### Always try to load ZFS pool cache file #################
|
|
##############################################################
|
|
|
|
zpool_cache_load="YES"
|
|
zpool_cache_type="/boot/zfs/zpool.cache"
|
|
zpool_cache_name="/boot/zfs/zpool.cache"
|