ian d8b6d1ce61 Make the standard sdhci(4) driver work for the TI OMAP family SoCs. ... The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a couple quirks, which are now supported by sdhci(4) as of r254507. This should work for all TI SoCs that use the MMCHS hardware, but it has only been tested on AM335x right now, so this enables it on those platforms but leaves the existing ti_mmchs driver in place for other OMAP variants until they can be tested. This initial incarnation lacks DMA support (coming soon). Even without it this improves performance pretty noticibly over the ti_mmchs driver, primarily because it now does multiblock IO.		2013-08-20 12:33:35 +00:00
..
am335x-evm.dts	- Add musb node to shared dtsi and proper pin configuratin for every	2013-07-07 04:23:29 +00:00
am335x.dtsi	Make the standard sdhci(4) driver work for the TI OMAP family SoCs.	2013-08-20 12:33:35 +00:00
bcm2835.dtsi	Split bcm2835-rpi-b.dts into bcm2835.dtsi and rpi.dts. This DTS actually works	2013-07-01 05:01:01 +00:00
beaglebone-black.dts	- MMC1 (internal eMMC) pins should be configured as input-pullup, except	2013-07-08 04:30:12 +00:00
beaglebone.dts	- Add musb node to shared dtsi and proper pin configuratin for every	2013-07-07 04:23:29 +00:00
bindings-gpio.txt
bindings-localbus.txt
bindings-mpp.txt
cubieboard2.dts	Bring initial support for Allwinner A20 SoC (Cubieboard2).	2013-08-07 11:07:56 +00:00
cubieboard.dts	Enable uart driver for A10.	2013-03-01 01:47:11 +00:00
db88f5182.dts
db88f5281.dts
db88f6281.dts	Divide nand flash for DB6281 into two partitions. One for u-boot	2012-05-22 09:27:57 +00:00
db78100.dts
db78460.dts	Move initialization of CESA decoding windows from common section	2013-05-06 13:34:36 +00:00
dockstar.dts
dreamplug-1001.dts	Add support for the GlobalScale Technologies DreamPlug computer.	2013-01-27 01:17:37 +00:00
dreamplug-1001N.dts	Add support for the GlobalScale Technologies DreamPlug computer.	2013-01-27 01:17:37 +00:00
ea3250.dts	Merging of projects/armv6, part 8	2012-08-15 05:37:10 +00:00
efikamx.dts	Integrate Efika MX project back to home.	2013-03-20 15:39:27 +00:00
exynos5250-arndale.dts	Add FDT for Arndale board and Samsung Exynos5250 SoC.	2013-06-29 12:24:11 +00:00
exynos5250.dtsi	Add FDT for Arndale board and Samsung Exynos5250 SoC.	2013-06-29 12:24:11 +00:00
imx51x.dtsi	Integrate Efika MX project back to home.	2013-03-20 15:39:27 +00:00
mpc8555cds.dts
mpc8572ds.dts
p1020rdb.dts
p2020ds.dts
p2041rdb.dts	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p2041si.dtsi	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p3041ds.dts	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p3041si.dtsi	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p5020ds.dts	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
p5020si.dtsi	Import DTS files for the upcoming DPAA QorIQ (PowerPC) support.	2012-05-25 20:43:38 +00:00
pandaboard.dts	Let the platform calculate the timer frequency at runtime, and use that for	2013-08-05 20:14:56 +00:00
rpi.dts	Split bcm2835-rpi-b.dts into bcm2835.dtsi and rpi.dts. This DTS actually works	2013-07-01 05:01:01 +00:00
sheevaplug.dts	Add a new geom class which allows to divide NAND Flash chip	2012-05-22 08:33:14 +00:00
tegra20-paz00.dts	Add the Tegra2 DTS files. Now our dtc supports including other files use	2012-09-17 07:14:07 +00:00
tegra20.dtsi	Add the Tegra2 DTS files. Now our dtc supports including other files use	2012-09-17 07:14:07 +00:00
trimslice.dts	Merging of projects/armv6, part 9	2012-08-15 06:06:43 +00:00
ts7800.dts
versatilepb.dts	Add support for QEMU's version of Versatile Platform Board	2012-12-13 23:19:13 +00:00
xlp-basic.dts	Add correct range parameter in XLP DTS	2012-08-21 09:37:23 +00:00
zedboard.dts	Add Xilinx Zynq ARM/FPGA SoC support to FreeBSD/arm port.	2013-04-27 22:38:29 +00:00