1ab3783e1a
bottom of the manpages and order them consistently. GNU groff doesn't care about the ordering, and doesn't even mention CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put them. Found by: mdocml lint run Reviewed by: ru
446 lines
13 KiB
Groff
446 lines
13 KiB
Groff
.\"
|
|
.\" Copyright (c) 1994, David Greenman
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
.\" must display the following acknowledgement:
|
|
.\" This product includes software developed by David Greenman.
|
|
.\" 4. The name of the author may not be used to endorse or promote products
|
|
.\" derived from this software without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd April 9, 2009
|
|
.Dt ED 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm ed
|
|
.Nd "NE-2000 and WD-80x3 Ethernet driver"
|
|
.Sh SYNOPSIS
|
|
To compile this driver into the kernel,
|
|
place the following lines in your
|
|
kernel configuration file:
|
|
.Bd -ragged -offset indent
|
|
.Cd "device miibus"
|
|
.Cd "device ed"
|
|
.Ed
|
|
.Pp
|
|
Alternatively, to load the driver as a
|
|
module at boot time, place the following line in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
if_ed_load="YES"
|
|
.Ed
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
driver provides support for 8 and 16bit Ethernet cards that are based on
|
|
the National Semiconductor DS8390 and similar NICs manufactured by
|
|
other companies.
|
|
The
|
|
.Nm
|
|
driver also supports many PC Card chips which interface via MII to a PHY.
|
|
Axiom's AX88790, AX88190 and AX88190A;
|
|
DLink's DL10019 and DL10022; and
|
|
Tamarack's TC5299J chips all support internal or external MII/PHY combinations.
|
|
Realtek's PCI and ISA RTL80x9-based cards are also supported.
|
|
For these chipsets, autonegotiation and status reporting are supported.
|
|
.Pp
|
|
In addition to the standard port and IRQ specifications, the
|
|
.Nm
|
|
driver also supports a number of
|
|
.Cd flags
|
|
which can force 8/16bit mode, enable/disable multi-buffering, and select the default
|
|
interface type (AUI/BNC, and for cards with twisted pair, AUI/10BaseT).
|
|
.Pp
|
|
The
|
|
.Cd flags
|
|
are a bit field, and are summarized as follows:
|
|
.Bl -tag -width indent
|
|
.It Li 0x01
|
|
Disable transceiver.
|
|
On those cards which support it, this flag causes the transceiver to
|
|
be disabled and the AUI connection to be used by default.
|
|
.It Li 0x02
|
|
Force 8bit mode.
|
|
This flag forces the card to 8bit mode regardless of how the
|
|
card identifies itself.
|
|
This may be needed for some clones which incorrectly
|
|
identify themselves as 16bit, even though they only have an 8bit interface.
|
|
This flag takes precedence over force 16bit mode.
|
|
.It Li 0x04
|
|
Force 16bit mode.
|
|
This flag forces the card to 16bit mode regardless of how the
|
|
card identifies itself.
|
|
This may be needed for some clones which incorrectly
|
|
identify themselves as 8bit, even though they have a 16bit ISA interface.
|
|
.It Li 0x08
|
|
Disable transmitter multi-buffering.
|
|
This flag disables the use of multiple
|
|
transmit buffers and may be necessary in rare cases where packets are sent out
|
|
faster than a machine on the other end can handle (as evidenced by severe packet
|
|
lossage).
|
|
Some
|
|
.No ( non- Ns Fx
|
|
:-)) machines have terrible Ethernet performance
|
|
and simply cannot cope with 1100K+ data rates.
|
|
Use of this flag also provides
|
|
one more packet worth of receiver buffering, and on 8bit cards, this may help
|
|
reduce receiver lossage.
|
|
.El
|
|
.Pp
|
|
When using a 3c503 card, the AUI connection may be selected by specifying the
|
|
.Cm link2
|
|
option to
|
|
.Xr ifconfig 8
|
|
(BNC is the default).
|
|
.Sh HARDWARE
|
|
The
|
|
.Nm
|
|
driver supports the following Ethernet NICs:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
3Com 3c503 Etherlink II
|
|
.Pq Cd "options ED_3C503"
|
|
.It
|
|
AR-P500 Ethernet
|
|
.It
|
|
Accton EN1644 (old model), EN1646 (old model), EN2203 (old model) (110pin)
|
|
(flags 0xd00000)
|
|
.It
|
|
Accton EN2212/EN2216/UE2216
|
|
.It
|
|
Allied Telesis CentreCOM LA100-PCM_V2
|
|
.It
|
|
Allied Telesis LA-98 (flags 0x000000) (PC-98)
|
|
.It
|
|
Allied Telesis SIC-98, SIC-98NOTE (110pin), SIU-98 (flags 0x600000) (PC-98)
|
|
.It
|
|
Allied Telesis SIU-98-D (flags 0x610000) (PC-98)
|
|
.It
|
|
AmbiCom 10BaseT card
|
|
.It
|
|
Bay Networks NETGEAR FA410TXC Fast Ethernet
|
|
.It
|
|
Belkin F5D5020 PC Card Fast Ethernet
|
|
.It
|
|
Billionton LM5LT-10B Ethernet/Modem PC Card
|
|
.It
|
|
Bromax iPort 10/100 Ethernet PC Card
|
|
.It
|
|
Bromax iPort 10 Ethernet PC Card
|
|
.It
|
|
Buffalo LPC2-CLT, LPC3-CLT, LPC3-CLX, LPC4-TX PC Card
|
|
.It
|
|
CNet BC40 adapter
|
|
.It
|
|
Compex Net-A adapter
|
|
.It
|
|
Compex RL2000
|
|
.It
|
|
Contec C-NET(98), RT-1007(98), C-NET(9N) (110pin) (flags 0xa00000) (PC-98)
|
|
.It
|
|
Contec C-NET(98)E-A, C-NET(98)L-A, C-NET(98)P (flags 0x300000) (PC-98)
|
|
.It
|
|
Corega Ether98-T (flags 0x000000) (PC-98)
|
|
.It
|
|
Corega Ether PCC-T/EtherII PCC-T/FEther PCC-TXF/PCC-TXD PCC-T/Fether II TXD
|
|
.It
|
|
Corega LAPCCTXD (TC5299J)
|
|
.It
|
|
CyQ've ELA-010
|
|
.It
|
|
DEC EtherWorks DE305
|
|
.It
|
|
Danpex EN-6200P2
|
|
.It
|
|
D-Link DE-298, DE-298P (flags 0x500000) (PC-98)
|
|
.It
|
|
D-Link DE-660, DE-660+
|
|
.It
|
|
D-Link IC-CARD/IC-CARD+ Ethernet
|
|
.It
|
|
ELECOM LD-98P (flags 0x500000) (PC-98)
|
|
.It
|
|
ELECOM LD-BDN, LD-NW801G (flags 0x200000) (PC-98)
|
|
.It
|
|
ELECOM Laneed LD-CDL/TX, LD-CDF, LD-CDS, LD-10/100CD, LD-CDWA (DP83902A)
|
|
.It
|
|
Hawking PN652TX PC Card (AX88790)
|
|
.It
|
|
HP PC Lan+ 27247B and 27252A
|
|
.Pq Cd "options ED_HPP"
|
|
.It
|
|
IBM Creditcard Ethernet I/II
|
|
.It
|
|
ICM AD-ET2-T, DT-ET-25, DT-ET-T5, IF-2766ET, IF-2771ET, NB-ET-T (110pin)
|
|
(flags 0x500000) (PC-98)
|
|
.It
|
|
I-O DATA LA/T-98, LA/T-98SB, LA2/T-98, ET/T-98 (flags 0x900000) (PC-98)
|
|
.It
|
|
I-O DATA ET2/T-PCI
|
|
.It
|
|
I-O DATA PCLATE
|
|
.It
|
|
Kansai KLA-98C/T (flags 0x900000) (PC-98)
|
|
.It
|
|
Kingston KNE-PC2, CIO10T, KNE-PCM/x Ethernet
|
|
.It
|
|
KTI ET32P2 PCI
|
|
.It
|
|
Linksys EC2T/PCMPC100/PCM100, PCMLM56
|
|
.It
|
|
Linksys EtherFast 10/100 PC Card, Combo PCMCIA Ethernet Card (PCMPC100 V2)
|
|
.It
|
|
Logitec LAN-98T (flags 0xb00000) (PC-98)
|
|
.It
|
|
MACNICA Ethernet ME1 for JEIDA
|
|
.It
|
|
MACNICA ME98 (flags 0x900000) (PC-98)
|
|
.It
|
|
MACNICA NE2098 (flags 0x400000) (PC-98)
|
|
.It
|
|
MELCO EGY-98 (flags 0x300000) (PC-98)
|
|
.It
|
|
MELCO LGH-98, LGY-98, LGY-98-N (110pin), IND-SP, IND-SS (flags 0x400000) (PC-98)
|
|
.It
|
|
MELCO LGY-PCI-TR
|
|
.It
|
|
MELCO LPC-T/LPC2-T/LPC2-CLT/LPC2-TX/LPC3-TX/LPC3-CLX
|
|
.It
|
|
NDC Ethernet Instant-Link
|
|
.It
|
|
NEC PC-9801-77, PC-9801-78 (flags 0x910000) (PC-98)
|
|
.It
|
|
NEC PC-9801-107, PC-9801-108 (flags 0x800000) (PC-98)
|
|
.It
|
|
National Semiconductor InfoMover NE4100
|
|
.It
|
|
NetGear FA-410TX
|
|
.It
|
|
NetVin NV5000SC
|
|
.It
|
|
Network Everywhere Ethernet 10BaseT PC Card
|
|
.It
|
|
Networld 98X3 (flags 0xd00000) (PC-98)
|
|
.It
|
|
Networld EC-98X, EP-98X (flags 0xd10000) (PC-98)
|
|
.It
|
|
New Media LANSurfer 10+56 Ethernet/Modem
|
|
.It
|
|
New Media LANSurfer
|
|
.It
|
|
Novell NE1000/NE2000/NE2100
|
|
.It
|
|
PLANEX ENW-8300-T
|
|
.It
|
|
PLANEX EN-2298-C (flags 0x200000) (PC-98)
|
|
.It
|
|
PLANEX EN-2298P-T, EN-2298-T (flags 0x500000) (PC-98)
|
|
.It
|
|
PLANEX FNW-3600-T
|
|
.It
|
|
Psion 10/100 LANGLOBAL Combine iT
|
|
.It
|
|
RealTek 8019
|
|
.It
|
|
RealTek 8029
|
|
.It
|
|
Relia Combo-L/M-56k PC Card
|
|
.It
|
|
SMC Elite 16 WD8013
|
|
.It
|
|
SMC Elite Ultra
|
|
.It
|
|
SMC EtherEZ98 (flags 0x000000) (PC-98)
|
|
.It
|
|
SMC WD8003E/WD8003EBT/WD8003S/WD8003SBT/WD8003W/WD8013EBT/WD8013W and clones
|
|
.It
|
|
SMC EZCard PC Card, 8040-TX, 8041-TX (AX88x90), 8041-TX V.2 (TC5299J)
|
|
.It
|
|
Socket LP-E, ES-1000 Ethernet/Serial, LP-E CF, LP-FE CF
|
|
.It
|
|
Surecom EtherPerfect EP-427
|
|
.It
|
|
Surecom NE-34
|
|
.It
|
|
TDK 3000/3400/5670 Fast Etherenet/Modem
|
|
.It
|
|
TDK LAK-CD031, Grey Cell GCS2000 Ethernet Card
|
|
.It
|
|
TDK DFL5610WS Ethernet/Modem PC Card
|
|
.It
|
|
Telecom Device SuperSocket RE450T
|
|
.It
|
|
Toshiba LANCT00A PC Card
|
|
.It
|
|
VIA VT86C926
|
|
.It
|
|
Winbond W89C940
|
|
.It
|
|
Winbond W89C940F
|
|
.El
|
|
.Pp
|
|
C-Bus, ISA, PCI and PC Card devices are supported.
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver does not support the following Ethernet NICs:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
Mitsubishi LAN Adapter B8895
|
|
.El
|
|
.Sh DIAGNOSTICS
|
|
.Bl -diag
|
|
.It "ed%d: failed to clear shared memory at %x - check configuration."
|
|
When the card was probed at system boot time, the
|
|
.Nm
|
|
driver found that it could not clear the card's shared memory.
|
|
This is most commonly
|
|
caused by a BIOS extension ROM being configured in the same address space as the
|
|
Ethernet card's shared memory.
|
|
Either find the offending card and change its BIOS
|
|
ROM to be at an address that does not conflict, or change the
|
|
settings in
|
|
.Xr device.hints 5
|
|
that the card's shared memory is mapped at a
|
|
non-conflicting address.
|
|
.It "ed%d: Invalid irq configuration (%d) must be 2-5 for 3c503."
|
|
The IRQ number that was specified in the
|
|
.Xr device.hints 5
|
|
file is not valid for the 3Com 3c503 card.
|
|
The 3c503 can only be assigned to IRQs 2 through 5.
|
|
.It "ed%d: Cannot find start of RAM."
|
|
.It "ed%d: Cannot find any RAM, start : %d, x = %d."
|
|
The probe of a Gateway card was unsuccessful in configuring the card's packet memory.
|
|
This likely indicates that the card was improperly recognized as a Gateway or that
|
|
the card is defective.
|
|
.It "ed: packets buffered, but transmitter idle."
|
|
Indicates a logic problem in the driver.
|
|
Should never happen.
|
|
.It "ed%d: device timeout"
|
|
Indicates that an expected transmitter interrupt did not occur.
|
|
Usually caused by an
|
|
interrupt conflict with another card on the ISA bus.
|
|
This condition could also be caused if the kernel is configured for a
|
|
different IRQ channel than the one the card is actually using.
|
|
If that is the case, you will have to either reconfigure the card
|
|
using a DOS utility or set the jumpers on the card appropriately.
|
|
.It "ed%d: NIC memory corrupt - invalid packet length %d."
|
|
Indicates that a packet was received with a packet length that was either larger than
|
|
the maximum size or smaller than the minimum size allowed by the IEEE 802.3 standard.
|
|
Usually
|
|
caused by a conflict with another card on the ISA bus, but in some cases may also
|
|
indicate faulty cabling.
|
|
.It "ed%d: remote transmit DMA failed to complete."
|
|
This indicates that a programmed I/O transfer to an NE1000 or NE2000 style card
|
|
has failed to properly complete.
|
|
Usually caused by the ISA bus speed being set
|
|
too fast.
|
|
.It "ed%d: Invalid irq configuration (%ld) must be %s for %s"
|
|
Indicates the device has a different IRQ than supported or expected.
|
|
.It "ed%d: Cannot locate my ports!"
|
|
The device is using a different I/O port than the driver knows about.
|
|
.It "ed%d: Cannot extract MAC address"
|
|
Attempts to get the MAC address failed.
|
|
.It "ed%d: Missing mii!"
|
|
Probing for an MII bus has failed.
|
|
This indicates a coding error in the PC Card attachment, because a PHY
|
|
is required for the chips that generate this error message.
|
|
.El
|
|
.Sh SEE ALSO
|
|
.Xr altq 4 ,
|
|
.Xr arp 4 ,
|
|
.Xr miibus 4 ,
|
|
.Xr netintro 4 ,
|
|
.Xr ng_ether 4 ,
|
|
.Xr device.hints 5 ,
|
|
.Xr ifconfig 8
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
device driver first appeared in
|
|
.Fx 1.0 .
|
|
.Sh AUTHORS
|
|
The
|
|
.Nm
|
|
device driver and this manual page were written by
|
|
.An David Greenman .
|
|
.Sh CAVEATS
|
|
Early revision DS8390 chips have problems.
|
|
They lock up whenever the receive
|
|
ring-buffer overflows.
|
|
They occasionally switch the byte order
|
|
of the length field in the packet ring header (several different causes
|
|
of this related to an off-by-one byte alignment) - resulting in
|
|
.Qq Li "NIC memory corrupt - invalid packet length"
|
|
messages.
|
|
The card is reset
|
|
whenever these problems occur, but otherwise there is no problem with
|
|
recovering from these conditions.
|
|
.Pp
|
|
The NIC memory access to 3Com and Novell cards is much slower than it is on
|
|
WD/SMC cards; it is less than 1MB/second on 8bit boards and less than 2MB/second
|
|
on the 16bit cards.
|
|
This can lead to ring-buffer overruns resulting in
|
|
dropped packets during heavy network traffic.
|
|
.Pp
|
|
The Mitsubishi B8895 PC Card uses a DP83902, but its ASIC part is
|
|
undocumented.
|
|
Neither the NE2000 nor the WD83x0 drivers work with this card.
|
|
.Pp
|
|
.Sh BUGS
|
|
The
|
|
.Nm
|
|
driver is a bit too aggressive about resetting the card whenever any bad
|
|
packets are received.
|
|
As a result, it may throw out some good packets which
|
|
have been received but not yet transferred from the card to main memory.
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver is slow by today's standards.
|
|
.Pp
|
|
PC Card attachment supports the D-Link DMF650TX LAN/Modem card's Ethernet
|
|
port only at this time.
|
|
.Pp
|
|
Some devices supported by
|
|
.Nm
|
|
do not generate the link state change events used by
|
|
.Xr devd 8
|
|
to start
|
|
.Xr dhclinet 8 .
|
|
If you have problems with
|
|
.Xr dhclient 8
|
|
not starting and the device is always attached to the network it may
|
|
be possible to work around this by changing
|
|
.Dq Li DHCP
|
|
to
|
|
.Dq Li SYNCDHCP
|
|
in the
|
|
.Va ifconfig_ed0
|
|
entry in
|
|
.Pa /etc/rc.conf .
|