d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d95ddf0251
freebsd-skq/sys/net80211/ieee80211_var.h
Sam Leffler 68e8e04e93 Update 802.11 wireless support: 
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00

573 lines
25 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_VAR_H_
#define _NET80211_IEEE80211_VAR_H_
/*
* Definitions for IEEE 802.11 drivers.
*/
#define IEEE80211_DEBUG
#undef IEEE80211_DEBUG_REFCNT /* node refcnt stuff */
/* NB: portability glue must go first */
#ifdef __NetBSD__
#include <net80211/ieee80211_netbsd.h>
#elif __FreeBSD__
#include <net80211/ieee80211_freebsd.h>
#elif __linux__
#include <net80211/ieee80211_linux.h>
#else
#error "No support for your operating system!"
#endif
#include <net80211/_ieee80211.h>
#include <net80211/ieee80211.h>
#include <net80211/ieee80211_crypto.h>
#include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */
#include <net80211/ieee80211_node.h>
#include <net80211/ieee80211_power.h>
#include <net80211/ieee80211_proto.h>
#include <net80211/ieee80211_scan.h>
#define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */
#define IEEE80211_TXPOWER_MIN 0 /* kill radio */
#define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */
#define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */
#define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */
#define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */
#define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */
#define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */
#define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */
#define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */
#define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */
#define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */
#define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */
#define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */
#define IEEE80211_FIXED_RATE_NONE -1
#define IEEE80211_MCAST_RATE_DEFAULT (2*1) /* default mcast rate (1M) */
#define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX
#define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX
#define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
#define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000)
#define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000))
struct ieee80211_aclator;
struct sysctl_ctx_list;
struct ieee80211com {
SLIST_ENTRY(ieee80211com) ic_next;
struct ifnet *ic_ifp; /* associated device */
ieee80211_com_lock_t ic_comlock; /* state update lock */
ieee80211_beacon_lock_t ic_beaconlock; /* beacon update lock */
struct ieee80211_stats ic_stats; /* statistics */
struct sysctl_ctx_list *ic_sysctl; /* dynamic sysctl context */
uint32_t ic_debug; /* debug msg flags */
int ic_vap; /* virtual AP index */
int ic_headroom; /* driver tx headroom needs */
enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */
enum ieee80211_opmode ic_opmode; /* operation mode */
struct ifmedia ic_media; /* interface media config */
uint8_t ic_myaddr[IEEE80211_ADDR_LEN];
uint32_t ic_flags; /* state flags */
uint32_t ic_flags_ext; /* extended state flags */
uint32_t ic_caps; /* capabilities */
uint8_t ic_modecaps[2]; /* set of mode capabilities */
uint16_t ic_curmode; /* current mode */
struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
uint16_t ic_bintval; /* beacon interval */
uint16_t ic_lintval; /* listen interval */
uint16_t ic_holdover; /* PM hold over duration */
uint16_t ic_txpowlimit; /* global tx power limit */
uint32_t ic_htcaps; /* HT capabilities */
int ic_ampdu_rxmax; /* A-MPDU rx limit (bytes) */
int ic_ampdu_density;/* A-MPDU density */
int ic_ampdu_limit; /* A-MPDU tx limit (bytes) */
int ic_amsdu_limit; /* A-MSDU tx limit (bytes) */
/*
* Channel state:
*
* ic_channels is the set of available channels for the device;
* it is setup by the driver
* ic_nchans is the number of valid entries in ic_channels
* ic_chan_avail is a bit vector of these channels used to check
* whether a channel is available w/o searching the channel table.
* ic_chan_active is a (potentially) constrained subset of
* ic_chan_avail that reflects any mode setting or user-specified
* limit on the set of channels to use/scan
* ic_curchan is the current channel the device is set to; it may
* be different from ic_bsschan when we are off-channel scanning
* or otherwise doing background work
* ic_bsschan is the channel selected for operation; it may
* be undefined (IEEE80211_CHAN_ANYC)
* ic_prevchan is a cached ``previous channel'' used to optimize
* lookups when switching back+forth between two channels
* (e.g. for dynamic turbo)
*/
int ic_nchans; /* # entries in ic_channels */
struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES];
uint8_t ic_chan_active[IEEE80211_CHAN_BYTES];
uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES];
struct ieee80211_channel *ic_curchan; /* current channel */
struct ieee80211_channel *ic_bsschan; /* bss channel */
struct ieee80211_channel *ic_prevchan; /* previous channel */
int ic_countrycode; /* ISO country code */
uint16_t ic_regdomain; /* regulatory domain */
uint8_t ic_location; /* unknown, indoor, outdoor */
struct ieee80211_scan_state *ic_scan; /* scan state */
enum ieee80211_roamingmode ic_roaming; /* roaming mode */
int ic_lastdata; /* time of last data frame */
int ic_lastscan; /* time last scan completed */
int ic_des_nssid; /* # desired ssids */
struct ieee80211_scan_ssid ic_des_ssid[1];/* desired ssid table */
uint8_t ic_des_bssid[IEEE80211_ADDR_LEN];
struct ieee80211_channel *ic_des_chan; /* desired channel */
int ic_des_mode; /* desired phymode */
u_int ic_bgscanidle; /* bg scan idle threshold */
u_int ic_bgscanintvl; /* bg scan min interval */
u_int ic_scanvalid; /* scan cache valid threshold */
struct ieee80211_roam ic_roam; /* sta-mode roaming state */
struct ieee80211_node_table ic_sta; /* stations/neighbors */
struct ieee80211_wme_state ic_wme; /* WME/WMM state */
const struct ieee80211_aclator *ic_acl; /* aclator glue */
void *ic_as; /* private aclator state */
enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */
uint16_t ic_nonerpsta; /* # non-ERP stations */
uint16_t ic_longslotsta; /* # long slot time stations */
uint16_t ic_sta_assoc; /* stations associated */
struct ifqueue ic_mgtq;
enum ieee80211_state ic_state; /* 802.11 state */
struct callout ic_mgtsend; /* mgmt frame response timer */
uint32_t *ic_aid_bitmap; /* association id map */
uint16_t ic_max_aid;
uint16_t ic_ps_sta; /* stations in power save */
uint16_t ic_ps_pending; /* ps sta's w/ pending frames */
uint8_t *ic_tim_bitmap; /* power-save stations w/ data*/
uint16_t ic_tim_len; /* ic_tim_bitmap size (bytes) */
uint8_t ic_dtim_period; /* DTIM period */
uint8_t ic_dtim_count; /* DTIM count for last bcn */
struct bpf_if *ic_rawbpf; /* packet filter structure */
struct ieee80211_node *ic_bss; /* information for this node */
int ic_fixed_rate; /* 802.11 rate or -1 */
int ic_mcast_rate; /* rate for mcast frames */
uint16_t ic_rtsthreshold;
uint16_t ic_fragthreshold;
uint8_t ic_bmissthreshold;
uint8_t ic_bmiss_count; /* current beacon miss count */
int ic_bmiss_max; /* max bmiss before scan */
uint16_t ic_swbmiss_count;/* beacons in last period */
uint16_t ic_swbmiss_period;/* s/w bmiss period */
struct callout ic_swbmiss; /* s/w beacon miss timer */
uint16_t ic_txmin; /* min tx retry count */
uint16_t ic_txmax; /* max tx retry count */
uint16_t ic_txlifetime; /* tx lifetime */
struct callout ic_inact; /* inactivity timer wait */
void *ic_opt_ie; /* user-specified IE's */
uint16_t ic_opt_ie_len; /* length of ni_opt_ie */
int ic_inact_init; /* initial setting */
int ic_inact_auth; /* auth but not assoc setting */
int ic_inact_run; /* authorized setting */
int ic_inact_probe; /* inactive probe time */
/*
* Cipher state/configuration.
*/
struct ieee80211_crypto_state ic_crypto;
#define ic_nw_keys ic_crypto.cs_nw_keys /* XXX compatibility */
#define ic_def_txkey ic_crypto.cs_def_txkey /* XXX compatibility */
/*
* 802.1x glue. When an authenticator attaches it
* fills in this section. We assume that when ic_ec
* is setup that the methods are safe to call.
*/
const struct ieee80211_authenticator *ic_auth;
struct eapolcom *ic_ec;
/* send/recv 802.11 management frame */
int (*ic_send_mgmt)(struct ieee80211com *,
struct ieee80211_node *, int, int);
void (*ic_recv_mgmt)(struct ieee80211com *,
struct mbuf *, struct ieee80211_node *,
int, int, int, uint32_t);
/* send raw 802.11 frame */
int (*ic_raw_xmit)(struct ieee80211_node *,
struct mbuf *,
const struct ieee80211_bpf_params *);
/* reset device state after 802.11 parameter/state change */
int (*ic_reset)(struct ifnet *);
/* update device state for 802.11 slot time change */
void (*ic_updateslot)(struct ifnet *);
/* new station association callback/notification */
void (*ic_newassoc)(struct ieee80211_node *, int);
/* node state management */
struct ieee80211_node *(*ic_node_alloc)(struct ieee80211_node_table*);
void (*ic_node_free)(struct ieee80211_node *);
void (*ic_node_cleanup)(struct ieee80211_node *);
int8_t (*ic_node_getrssi)(const struct ieee80211_node*);
void (*ic_node_getsignal)(const struct ieee80211_node*,
int8_t *, int8_t *);
/* scanning support */
void (*ic_scan_start)(struct ieee80211com *);
void (*ic_scan_end)(struct ieee80211com *);
void (*ic_set_channel)(struct ieee80211com *);
void (*ic_scan_curchan)(struct ieee80211com *,
unsigned long);
void (*ic_scan_mindwell)(struct ieee80211com *);
/* per-vap eventually... */
int (*ic_newstate)(struct ieee80211com *,
enum ieee80211_state, int);
void (*ic_set_tim)(struct ieee80211_node *, int);
/*
* 802.11n ADDBA support. A simple/generic implementation
* of A-MPDU tx aggregation is provided; the driver may
* override these methods to provide their own support.
* A-MPDU rx re-ordering happens automatically if the
* driver passes out-of-order frames to ieee80211_input
* from an assocated HT station.
*/
void (*ic_recv_action)(struct ieee80211_node *,
const uint8_t *frm, const uint8_t *efrm);
int (*ic_send_action)(struct ieee80211_node *,
int category, int action,
uint16_t args[4]);
/* start/stop doing A-MPDU tx aggregation for a station */
int (*ic_addba_request)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *,
int dialogtoken, int baparamset,
int batimeout);
int (*ic_addba_response)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *,
int status, int baparamset, int batimeout);
void (*ic_addba_stop)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *);
};
#define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
#define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN)
/* ic_flags */
/* NB: bits 0x4c available */
#define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/
#define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */
#define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */
#define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
#define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */
#define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */
#define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */
#define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */
#define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
#define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/
#define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */
#define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */
#define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */
#define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/
#define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */
#define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */
#define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */
#define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */
#define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */
#define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */
#define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/
#define IEEE80211_F_TIMUPDATE 0x00400000 /* STATUS: update beacon tim */
#define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */
#define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */
#define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */
#define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */
#define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */
#define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */
#define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */
#define IEEE80211_F_WMEUPDATE 0x20000000 /* STATUS: update beacon wme */
#define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */
/* Atheros protocol-specific flags */
#define IEEE80211_F_ATHEROS \
(IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP)
/* Check if an Atheros capability was negotiated for use */
#define IEEE80211_ATH_CAP(ic, ni, bit) \
((ic)->ic_flags & (ni)->ni_ath_flags & (bit))
/* ic_flags_ext */
#define IEEE80211_FEXT_WDS 0x00000001 /* CONF: 4 addr allowed */
/* 0x00000006 reserved */
#define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */
#define IEEE80211_FEXT_ERPUPDATE 0x00000200 /* STATUS: update ERP element */
#define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */
#define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/
#define IEEE80211_FEXT_HT 0x00080000 /* CONF: HT supported */
#define IEEE80211_FEXT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */
#define IEEE80211_FEXT_AMPDU_RX 0x00200000 /* CONF: A-MPDU tx supported */
#define IEEE80211_FEXT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */
#define IEEE80211_FEXT_AMSDU_RX 0x00800000 /* CONF: A-MSDU tx supported */
#define IEEE80211_FEXT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */
#define IEEE80211_FEXT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */
#define IEEE80211_FEXT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */
#define IEEE80211_FEXT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */
#define IEEE80211_FEXT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */
/* ic_caps */
#define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */
#define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */
#define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */
#define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */
#define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */
#define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */
#define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/
#define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */
#define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */
#define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */
#define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */
#define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */
#define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */
#define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */
#define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */
#define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */
#define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */
#define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */
#define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */
#define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/
#define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */
#define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */
#define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */
/* 0x10000000 reserved */
#define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */
#define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */
/* XXX protection/barker? */
#define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */
/*
* ic_htcaps: HT-specific device/driver capabilities
*
* NB: the low 16-bits are the 802.11 definitions, the upper
* 16-bits are used to define s/w/driver capabilities.
*/
#define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */
#define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */
void ieee80211_ifattach(struct ieee80211com *);
void ieee80211_ifdetach(struct ieee80211com *);
const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic,
const struct ieee80211_channel *);
void ieee80211_announce(struct ieee80211com *);
void ieee80211_announce_channels(struct ieee80211com *);
void ieee80211_media_init(struct ieee80211com *,
ifm_change_cb_t, ifm_stat_cb_t);
struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]);
int ieee80211_media_change(struct ifnet *);
void ieee80211_media_status(struct ifnet *, struct ifmediareq *);
int ieee80211_ioctl(struct ieee80211com *, u_long, caddr_t);
int ieee80211_cfgget(struct ieee80211com *, u_long, caddr_t);
int ieee80211_cfgset(struct ieee80211com *, u_long, caddr_t);
int ieee80211_rate2media(struct ieee80211com *, int,
enum ieee80211_phymode);
int ieee80211_media2rate(int);
int ieee80211_mhz2ieee(u_int, u_int);
int ieee80211_chan2ieee(struct ieee80211com *,
const struct ieee80211_channel *);
u_int ieee80211_ieee2mhz(u_int, u_int);
struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *,
int freq, int flags);
int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *);
/*
* Key update synchronization methods. XXX should not be visible.
*/
static __inline void
ieee80211_key_update_begin(struct ieee80211com *ic)
{
ic->ic_crypto.cs_key_update_begin(ic);
}
static __inline void
ieee80211_key_update_end(struct ieee80211com *ic)
{
ic->ic_crypto.cs_key_update_end(ic);
}
/*
* XXX these need to be here for IEEE80211_F_DATAPAD
*/
/*
* Return the space occupied by the 802.11 header and any
* padding required by the driver. This works for a
* management or data frame.
*/
static __inline int
ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_hdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(uint32_t));
return size;
}
/*
* Like ieee80211_hdrspace, but handles any type of frame.
*/
static __inline int
ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_anyhdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(uint32_t));
return size;
}
#define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */
#define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */
#define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */
#define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */
#define IEEE80211_MSG_INPUT 0x08000000 /* input handling */
#define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */
#define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */
#define IEEE80211_MSG_NODE 0x01000000 /* node handling */
#define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */
#define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */
#define IEEE80211_MSG_SCAN 0x00200000 /* scanning */
#define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */
#define IEEE80211_MSG_STATE 0x00080000 /* state machine */
#define IEEE80211_MSG_POWER 0x00040000 /* power save handling */
#define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */
#define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */
#define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */
#define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */
#define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */
#define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */
#define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */
#define IEEE80211_MSG_WME 0x00000400 /* WME protocol */
#define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */
#define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */
#define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */
#define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */
#define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */
#define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */
#define IEEE80211_MSG_ANY 0xffffffff /* anything */
#ifdef IEEE80211_DEBUG
#define ieee80211_msg(_ic, _m) ((_ic)->ic_debug & (_m))
#define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note(_ic, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__); \
} while (0)
void ieee80211_note(struct ieee80211com *ic, const char *fmt, ...);
void ieee80211_note_mac(struct ieee80211com *ic,
const uint8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...);
void ieee80211_note_frame(struct ieee80211com *ic,
const struct ieee80211_frame *wh, const char *fmt, ...);
#define ieee80211_msg_debug(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_DEBUG)
#define ieee80211_msg_dumppkts(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS)
#define ieee80211_msg_input(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_INPUT)
#define ieee80211_msg_radius(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADIUS)
#define ieee80211_msg_dumpradius(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADDUMP)
#define ieee80211_msg_dumpradkeys(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADKEYS)
#define ieee80211_msg_scan(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_SCAN)
#define ieee80211_msg_assoc(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_ASSOC)
/*
* Emit a debug message about discarding a frame or information
* element. One format is for extracting the mac address from
* the frame header; the other is for when a header is not
* available or otherwise appropriate.
*/
#define IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...) do { \
if ((_ic)->ic_debug & (_m)) \
ieee80211_discard_frame(_ic, _wh, _type, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...) do { \
if ((_ic)->ic_debug & (_m)) \
ieee80211_discard_ie(_ic, _wh, _type, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...) do { \
if ((_ic)->ic_debug & (_m)) \
ieee80211_discard_mac(_ic, _mac, _type, _fmt, __VA_ARGS__);\
} while (0)
void ieee80211_discard_frame(struct ieee80211com *,
const struct ieee80211_frame *, const char *type, const char *fmt, ...);
void ieee80211_discard_ie(struct ieee80211com *,
const struct ieee80211_frame *, const char *type, const char *fmt, ...);
void ieee80211_discard_mac(struct ieee80211com *,
const uint8_t mac[IEEE80211_ADDR_LEN], const char *type,
const char *fmt, ...);
#else
#define IEEE80211_DPRINTF(_ic, _m, _fmt, ...)
#define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...)
#define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...)
#define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...)
#define ieee80211_msg_dumppkts(_ic) 0
#define ieee80211_msg(_ic, _m) 0
#define IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...)
#define IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...)
#define IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...)
#endif
#endif /* _NET80211_IEEE80211_VAR_H_ */
Reference in New Issue View Git Blame Copy Permalink