freebsd-skq/sys/dev/zs/zs_sbus.c
jake 780a41f3ca Split this into bus specific front end(s), so that it can be used by ppc.
This abstracts out all the differences I could see between the netbsd
sparc64 and macppc zs drivers.   In particular the offsets of the csr and
data registers are different, so we use a separate bus handle for each and
use bus_space_subregion to add the bus specific offsets.

Requested by:	benno
2003-01-08 23:36:16 +00:00

282 lines
7.3 KiB
C

/*-
* Copyright (c) 2003 Jake Burkholder.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <ofw/openfirm.h>
#include <sparc64/sbus/sbusvar.h>
#include <dev/zs/z8530reg.h>
#include <dev/zs/z8530var.h>
#define ZS_SBUS_CHAN_A 4
#define ZS_SBUS_CHAN_B 0
#define ZS_SBUS_CSR 0
#define ZS_SBUS_DATA 2
#define ZS_SBUS_CLOCK (9600 * 512)
#define ZS_SBUS_CLOCK_DIV (16)
#define ZS_SBUS_DEF_SPEED (9600)
struct zs_sbus_softc {
struct zs_softc sc_zs;
struct resource *sc_irqres;
int sc_irqrid;
void *sc_ih;
struct resource *sc_memres;
int sc_memrid;
};
static int zs_sbus_attach(device_t dev);
static int zs_sbus_detach(device_t dev);
static int zs_sbus_probe(device_t dev);
static int zstty_sbus_attach(device_t dev);
static int zstty_sbus_probe(device_t dev);
static int zstty_keyboard(device_t dev);
static device_method_t zs_sbus_methods[] = {
DEVMETHOD(device_probe, zs_sbus_probe),
DEVMETHOD(device_attach, zs_sbus_attach),
DEVMETHOD(device_detach, zs_sbus_detach),
DEVMETHOD(bus_print_child, bus_generic_print_child),
{ 0, 0 }
};
static device_method_t zstty_sbus_methods[] = {
DEVMETHOD(device_probe, zstty_sbus_probe),
DEVMETHOD(device_attach, zstty_sbus_attach),
DEVMETHOD(device_detach, bus_generic_detach),
{ 0, 0 }
};
static driver_t zs_sbus_driver = {
"zs",
zs_sbus_methods,
sizeof(struct zs_sbus_softc),
};
static driver_t zstty_sbus_driver = {
"zstty",
zstty_sbus_methods,
sizeof(struct zstty_softc),
};
static devclass_t zs_sbus_devclass;
static devclass_t zstty_sbus_devclass;
DRIVER_MODULE(zstty, zs, zstty_sbus_driver, zstty_sbus_devclass, 0, 0);
DRIVER_MODULE(zs, sbus, zs_sbus_driver, zs_sbus_devclass, 0, 0);
static uint8_t zs_sbus_init_reg[16] = {
0, /* 0: CMD (reset, etc.) */
0, /* 1: No interrupts yet. */
0, /* 2: IVECT */
ZSWR3_RX_8 | ZSWR3_RX_ENABLE,
ZSWR4_CLK_X16 | ZSWR4_ONESB | ZSWR4_EVENP,
ZSWR5_TX_8 | ZSWR5_TX_ENABLE,
0, /* 6: TXSYNC/SYNCLO */
0, /* 7: RXSYNC/SYNCHI */
0, /* 8: alias for data port */
ZSWR9_MASTER_IE | ZSWR9_NO_VECTOR,
0, /* 10: Misc. TX/RX control bits */
ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD,
((ZS_SBUS_CLOCK/32)/ZS_SBUS_DEF_SPEED)-2,
0,
ZSWR14_BAUD_ENA | ZSWR14_BAUD_FROM_PCLK,
ZSWR15_BREAK_IE,
};
static int
zs_sbus_probe(device_t dev)
{
if (strcmp(sbus_get_name(dev), "zs") != 0 ||
device_get_unit(dev) != 0)
return (ENXIO);
return (zs_probe(dev));
}
static int
zs_sbus_attach(device_t dev)
{
struct zs_sbus_softc *sc;
sc = device_get_softc(dev);
sc->sc_memres = bus_alloc_resource(dev, SYS_RES_MEMORY, &sc->sc_memrid,
0, ~0, 1, RF_ACTIVE);
if (sc->sc_memres == NULL)
goto error;
sc->sc_irqres = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->sc_irqrid, 0,
~0, 1, RF_ACTIVE);
if (sc->sc_irqres == NULL)
goto error;
if (bus_setup_intr(dev, sc->sc_irqres, INTR_TYPE_TTY | INTR_FAST,
zs_intr, sc, &sc->sc_ih) != 0)
goto error;
sc->sc_zs.sc_bt = rman_get_bustag(sc->sc_memres);
sc->sc_zs.sc_bh = rman_get_bushandle(sc->sc_memres);
return (zs_attach(dev));
error:
zs_sbus_detach(dev);
return (ENXIO);
}
static int
zs_sbus_detach(device_t dev)
{
struct zs_sbus_softc *sc;
sc = device_get_softc(dev);
if (sc->sc_irqres != NULL) {
if (sc->sc_ih != NULL)
bus_teardown_intr(dev, sc->sc_irqres, sc->sc_ih);
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid,
sc->sc_irqres);
}
if (sc->sc_memres != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid,
sc->sc_memres);
return (0);
}
static int
zstty_sbus_probe(device_t dev)
{
if (zstty_keyboard(dev)) {
if ((device_get_unit(dev) & 1) == 0)
device_set_desc(dev, "keyboard");
else
device_set_desc(dev, "mouse");
} else {
if ((device_get_unit(dev) & 1) == 0)
device_set_desc(dev, "ttya");
else
device_set_desc(dev, "ttyb");
}
return (zstty_probe(dev));
}
static int
zstty_sbus_attach(device_t dev)
{
struct zstty_softc *sc;
sc = device_get_softc(dev);
sc->sc_parent = device_get_softc(device_get_parent(dev));
sc->sc_bt = sc->sc_parent->sc_bt;
sc->sc_brg_clk = ZS_SBUS_CLOCK / ZS_SBUS_CLOCK_DIV;
switch (device_get_unit(dev) & 1) {
case 0:
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_SBUS_CHAN_A + ZS_SBUS_CSR, 1, &sc->sc_csr);
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_SBUS_CHAN_A + ZS_SBUS_DATA, 1, &sc->sc_data);
break;
case 1:
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_SBUS_CHAN_B + ZS_SBUS_CSR, 1, &sc->sc_csr);
bus_space_subregion(sc->sc_bt, sc->sc_parent->sc_bh,
ZS_SBUS_CHAN_B + ZS_SBUS_DATA, 1, &sc->sc_data);
break;
}
bcopy(zs_sbus_init_reg, sc->sc_creg, 16);
bcopy(zs_sbus_init_reg, sc->sc_preg, 16);
return (zstty_attach(dev));
}
void
zstty_set_speed(struct zstty_softc *sc, int ospeed)
{
sc->sc_preg[12] = ospeed;
sc->sc_preg[13] = ospeed >> 8;
}
int
zstty_console(device_t dev, char *mode, int len)
{
device_t parent;
phandle_t chosen;
phandle_t options;
ihandle_t stdin;
ihandle_t stdout;
char output[32];
char input[32];
char name[32];
parent = device_get_parent(dev);
chosen = OF_finddevice("/chosen");
options = OF_finddevice("/options");
if (OF_getprop(chosen, "stdin", &stdin, sizeof(stdin)) == -1 ||
OF_getprop(chosen, "stdout", &stdout, sizeof(stdout)) == -1 ||
OF_getprop(options, "input-device", input, sizeof(input)) == -1 ||
OF_getprop(options, "output-device", output, sizeof(output)) == -1)
return (0);
if (sbus_get_node(parent) == OF_instance_to_package(stdin) &&
sbus_get_node(parent) == OF_instance_to_package(stdout) &&
strcmp(input, device_get_desc(dev)) == 0 &&
strcmp(output, device_get_desc(dev)) == 0) {
if (mode != NULL) {
sprintf(name, "%s-mode", input);
return (OF_getprop(options, name, mode, len) != -1);
} else
return (1);
}
return (0);
}
static int
zstty_keyboard(device_t dev)
{
device_t parent;
parent = device_get_parent(dev);
return (OF_getproplen(sbus_get_node(parent), "keyboard") == 0);
}