freebsd-skq/sys/i386/isa/sound/cs4232.c
peter d5ef9c3e61 I've been using these tweaks to enable the sound driver to talk to the
(mutant) Crystal CSS4236 chip on the Intel PR440FX SMP motherboard.

XXX this uses some rather ugly PnP bootstrap code that is *NOT* compatable
with 'controller pnp0' or *ANY* other PnP devices.  If you use some other
PnP devices, enabling css0 will burn your house down. :-]  The
"simplified" PnP init sequence directly blats your config(8) settings onto
the chip.  I'm pretty sure 'css0' will conflict with 'mss0', this whole
area desperately needs a cleanup.

I have been using the following with some success on the PR440FX:
controller   snd0
device css0  at isa? port 0x534 irq 5 drq 1 flags 0x08 vector adintr
device opl0  at isa? port 0x388
device mpu0  at isa? port 0x330 irq 10 vector mpuintr
1997-12-12 14:08:50 +00:00

205 lines
5.9 KiB
C

/*
* sound/cs4232.c
*
* The low level driver for Crystal CS4232 based cards. The CS4232 is a PnP
* compatible chip which contains a CS4231A codec, SB emulation, a MPU401
* compatible MIDI port, joystick and synthesizer and IDE CD-ROM interfaces.
* This is just a temporary driver until full PnP support gets inplemented.
* Just the WSS codec, FM synth and the MIDI ports are supported. Other
* interfaces are left uninitialized.
*
* Copyright by Hannu Savolainen 1995
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer. 2.
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <i386/isa/sound/sound_config.h>
#if defined(CONFIG_CS4232)
#define KEY_PORT 0x279 /* Same as LPT1 status port */
#define CSN_NUM 0x99 /* Just a random number */
#define CS_OUT(a) outb( KEY_PORT, a)
#define CS_OUT2(a, b) {CS_OUT(a);CS_OUT(b);}
#define CS_OUT3(a, b, c) {CS_OUT(a);CS_OUT(b);CS_OUT(c);}
static int mpu_base = 0, mpu_irq = 0;
static int mpu_detected = 0;
int
probe_cs4232_mpu(struct address_info * hw_config)
{
/*
* Just write down the config values.
*/
mpu_base = hw_config->io_base;
mpu_irq = hw_config->irq;
return 0;
}
void
attach_cs4232_mpu(struct address_info * hw_config)
{
}
static unsigned char crystal_key[] = /* A 32 byte magic key sequence */
{
0x96, 0x35, 0x9a, 0xcd, 0xe6, 0xf3, 0x79, 0xbc,
0x5e, 0xaf, 0x57, 0x2b, 0x15, 0x8a, 0xc5, 0xe2,
0xf1, 0xf8, 0x7c, 0x3e, 0x9f, 0x4f, 0x27, 0x13,
0x09, 0x84, 0x42, 0xa1, 0xd0, 0x68, 0x34, 0x1a
};
int
probe_cs4232(struct address_info * hw_config)
{
int i;
int base = hw_config->io_base, irq = hw_config->irq;
int dma1 = hw_config->dma, dma2 = hw_config->dma2;
/*
* Verify that the I/O port range is free.
*/
if (0) {
printf("cs4232.c: I/O port 0x%03x not free\n", base);
return 0;
}
/*
* This version of the driver doesn't use the PnP method when
* configuring the card but a simplified method defined by Crystal.
* This means that just one CS4232 compatible device can exist on the
* system. Also this method conflicts with possible PnP support in
* the OS. For this reason driver is just a temporary kludge.
*/
/*
* Wake up the card by sending a 32 byte Crystal key to the key port.
*/
for (i = 0; i < 32; i++)
CS_OUT(crystal_key[i]);
/*
* Now set the CSN (Card Select Number).
*/
CS_OUT2(0x06, CSN_NUM);
/*
* Ensure that there is no other codec using the same address.
*/
CS_OUT2(0x15, 0x00); /* Select logical device 0 (WSS/SB/FM) */
CS_OUT2(0x33, 0x00); /* Inactivate logical dev 0 */
/*
* Then set some config bytes. First logical device 0
*/
CS_OUT2(0x15, 0x00); /* Select logical device 0 (WSS/SB/FM) */
CS_OUT3(0x47, (base >> 8) & 0xff, base & 0xff); /* WSSbase */
if (0) /* Not free */
CS_OUT3(0x48, 0x00, 0x00) /* FMbase off */
else
CS_OUT3(0x48, 0x03, 0x88); /* FMbase 0x388 */
CS_OUT3(0x42, 0x00, 0x00); /* SBbase off */
CS_OUT2(0x22, irq); /* SB+WSS IRQ */
CS_OUT2(0x2a, dma1); /* SB+WSS DMA */
if (dma2 != -1)
CS_OUT2(0x25, dma2) /* WSS DMA2 */
else
CS_OUT2(0x25, 4); /* No WSS DMA2 */
CS_OUT2(0x33, 0x01); /* Activate logical dev 0 */
/*
* Initialize logical device 3 (MPU)
*/
#if (defined(CONFIG_MPU401) || defined(CONFIG_MPU_EMU)) && defined(CONFIG_MIDI)
if (mpu_base != 0 && mpu_irq != 0) {
CS_OUT2(0x15, 0x03); /* Select logical device 3 (MPU) */
CS_OUT3(0x47, (mpu_base >> 8) & 0xff, mpu_base & 0xff); /* MPUbase */
CS_OUT2(0x22, mpu_irq); /* MPU IRQ */
CS_OUT2(0x33, 0x01); /* Activate logical dev 3 */
}
#endif
/*
* Finally activate the chip
*/
CS_OUT(0x79);
/*
* Then try to detect the codec part of the chip
*/
return ad1848_detect(hw_config->io_base, NULL, hw_config->osp);
}
void
attach_cs4232(struct address_info * hw_config)
{
int base = hw_config->io_base, irq = hw_config->irq;
int dma1 = hw_config->dma, dma2 = hw_config->dma2;
if (dma2 == -1)
dma2 = dma1;
ad1848_init("CS4232", base,
irq,
dma1, /* Playback DMA */
dma2, /* Capture DMA */
0,
hw_config->osp);
#if (defined(CONFIG_MPU401) || defined(CONFIG_MPU_EMU)) && defined(CONFIG_MIDI)
if (mpu_base != 0 && mpu_irq != 0) {
static struct address_info hw_config2 =
{0}; /* Ensure it's initialized */
hw_config2.io_base = mpu_base;
hw_config2.irq = mpu_irq;
hw_config2.dma = -1;
hw_config2.dma2 = -1;
hw_config2.always_detect = 0;
hw_config2.name = NULL;
hw_config2.card_subtype = 0;
hw_config2.osp = hw_config->osp;
if (probe_mpu401(&hw_config2)) {
mpu_detected = 1;
attach_mpu401(&hw_config2);
} else {
mpu_base = mpu_irq = 0;
}
}
#endif
}
#endif