freebsd-skq/sys/dev/mpt/mpilib/mpi_init.h
Matt Jacob 7fed69ee80 Update MPILIB from code received from LSI. Make changes in the rest of
the driver based upon some somewhat gratuitous name changes.
2003-06-03 17:47:48 +00:00

345 lines
16 KiB
C

/* $FreeBSD$ */
/*
* Copyright (c) 2000, 2001 by LSI Logic Corporation
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
* Name: MPI_INIT.H
* Title: MPI initiator mode messages and structures
* Creation Date: June 8, 2000
*
* MPI_INIT.H Version: 01.02.06
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000.
* 05-24-00 00.10.02 Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
* 06-06-00 01.00.01 Update version number for 1.0 release.
* 06-08-00 01.00.02 Added MPI_SCSI_RSP_INFO_ definitions.
* 11-02-00 01.01.01 Original release for post 1.0 work.
* 12-04-00 01.01.02 Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
* 02-20-01 01.01.03 Started using MPI_POINTER.
* 03-27-01 01.01.04 Added structure offset comments.
* 04-10-01 01.01.05 Added new MsgFlag for MSG_SCSI_TASK_MGMT.
* 08-08-01 01.02.01 Original release for v1.2 work.
* 08-29-01 01.02.02 Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET.
* Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for
* MSG_SCSI_IO_REPLY.
* 09-28-01 01.02.03 Added structures and defines for SCSI Enclosure
* Processor messages.
* 10-04-01 01.02.04 Added defines for SEP request Action field.
* 05-31-02 01.02.05 Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
* for SCSI IO requests.
* 11-15-02 01.02.06 Added special extended SCSI Status defines for FCP.
* --------------------------------------------------------------------------
*/
#ifndef MPI_INIT_H
#define MPI_INIT_H
/*****************************************************************************
*
* S C S I I n i t i a t o r M e s s a g e s
*
*****************************************************************************/
/****************************************************************************/
/* SCSI IO messages and assocaited structures */
/****************************************************************************/
typedef struct _MSG_SCSI_IO_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Control; /* 14h */
U8 CDB[16]; /* 18h */
U32 DataLength; /* 28h */
U32 SenseBufferLowAddr; /* 2Ch */
SGE_IO_UNION SGL; /* 30h */
} MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST,
SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t;
/* SCSI IO MsgFlags bits */
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32 (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 (0x01)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION (0x02)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST (0x00)
#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC (0x02)
#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR (0x04)
/* SCSI IO LUN fields */
#define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF)
#define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000)
#define MPI_SCSIIO_LUN_LEVEL_1_WORD (0xFF00)
#define MPI_SCSIIO_LUN_LEVEL_1_DWORD (0x0000FF00)
/* SCSI IO Control bits */
#define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
#define MPI_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
#define MPI_SCSIIO_CONTROL_WRITE (0x01000000)
#define MPI_SCSIIO_CONTROL_READ (0x02000000)
#define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK (0x3C000000)
#define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
#define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
#define MPI_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
#define MPI_SCSIIO_CONTROL_HEADOFQ (0x00000100)
#define MPI_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
#define MPI_SCSIIO_CONTROL_ACAQ (0x00000400)
#define MPI_SCSIIO_CONTROL_UNTAGGED (0x00000500)
#define MPI_SCSIIO_CONTROL_NO_DISCONNECT (0x00000700)
#define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK (0x00FF0000)
#define MPI_SCSIIO_CONTROL_OBSOLETE (0x00800000)
#define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV (0x00400000)
#define MPI_SCSIIO_CONTROL_TARGET_RESET (0x00200000)
#define MPI_SCSIIO_CONTROL_LUN_RESET_RSV (0x00100000)
#define MPI_SCSIIO_CONTROL_RESERVED (0x00080000)
#define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV (0x00040000)
#define MPI_SCSIIO_CONTROL_ABORT_TASK_SET (0x00020000)
#define MPI_SCSIIO_CONTROL_RESERVED2 (0x00010000)
/* SCSI IO reply structure */
typedef struct _MSG_SCSI_IO_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 CDBLength; /* 04h */
U8 SenseBufferLength; /* 05h */
U8 Reserved; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 SCSIStatus; /* 0Ch */
U8 SCSIState; /* 0Dh */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TransferCount; /* 14h */
U32 SenseCount; /* 18h */
U32 ResponseInfo; /* 1Ch */
} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY,
SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t;
/* SCSI IO Reply SCSIStatus values (SAM-2 status codes) */
#define MPI_SCSI_STATUS_SUCCESS (0x00)
#define MPI_SCSI_STATUS_CHECK_CONDITION (0x02)
#define MPI_SCSI_STATUS_CONDITION_MET (0x04)
#define MPI_SCSI_STATUS_BUSY (0x08)
#define MPI_SCSI_STATUS_INTERMEDIATE (0x10)
#define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
#define MPI_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
#define MPI_SCSI_STATUS_COMMAND_TERMINATED (0x22)
#define MPI_SCSI_STATUS_TASK_SET_FULL (0x28)
#define MPI_SCSI_STATUS_ACA_ACTIVE (0x30)
#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT (0x80)
#define MPI_SCSI_STATUS_FCPEXT_NO_LINK (0x81)
/* SCSI IO Reply SCSIState values */
#define MPI_SCSI_STATE_AUTOSENSE_VALID (0x01)
#define MPI_SCSI_STATE_AUTOSENSE_FAILED (0x02)
#define MPI_SCSI_STATE_NO_SCSI_STATUS (0x04)
#define MPI_SCSI_STATE_TERMINATED (0x08)
#define MPI_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
#define MPI_SCSI_STATE_QUEUE_TAG_REJECTED (0x20)
/* SCSI IO Reply ResponseInfo values */
/* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */
#define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE (0x00000000)
#define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR (0x01000000)
#define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID (0x02000000)
#define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR (0x03000000)
#define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000)
#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED (0x05000000)
#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE (0x06000000)
/****************************************************************************/
/* SCSI Task Management messages */
/****************************************************************************/
typedef struct _MSG_SCSI_TASK_MGMT
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 Reserved; /* 04h */
U8 TaskType; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 LUN[8]; /* 0Ch */
U32 Reserved2[7]; /* 14h */
U32 TaskMsgContext; /* 30h */
} MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT,
SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t;
/* TaskType values */
#define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
#define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
#define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS (0x04)
#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
/* MsgFlags bits */
#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION (0x00)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION (0x02)
#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04)
/* SCSI Task Management Reply */
typedef struct _MSG_SCSI_TASK_MGMT_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 Reserved; /* 04h */
U8 TaskType; /* 05h */
U8 Reserved1; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 Reserved2[2]; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 TerminationCount; /* 14h */
} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY,
SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t;
/****************************************************************************/
/* SCSI Enclosure Processor messages */
/****************************************************************************/
typedef struct _MSG_SEP_REQUEST
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U8 Action; /* 04h */
U8 Reserved1; /* 05h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U32 SlotStatus; /* 0Ch */
} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST,
SEPRequest_t, MPI_POINTER pSEPRequest_t;
/* Action defines */
#define MPI_SEP_REQ_ACTION_WRITE_STATUS (0x00)
#define MPI_SEP_REQ_ACTION_READ_STATUS (0x01)
/* SlotStatus bits for MSG_SEP_REQUEST */
#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK (0x00000020)
#define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT (0x00080000)
#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE (0x00400000)
#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF (0x10000000)
#define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET (0x80000000)
typedef struct _MSG_SEP_REPLY
{
U8 TargetID; /* 00h */
U8 Bus; /* 01h */
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U8 Action; /* 04h */
U8 Reserved1; /* 05h */
U8 Reserved2; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved3; /* 0Ch */
U16 IOCStatus; /* 0Eh */
U32 IOCLogInfo; /* 10h */
U32 SlotStatus; /* 14h */
} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY,
SEPReply_t, MPI_POINTER pSEPReply_t;
/* SlotStatus bits for MSG_SEP_REPLY */
#define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK (0x00000020)
#define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI_SEP_REPLY_SLOTSTATUS_REPORT (0x00010000)
#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY (0x00080000)
#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE (0x00400000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED (0x01000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED (0x02000000)
#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS (0x04000000)
#define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS (0x08000000)
#define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x10000000)
#define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED (0x40000000)
#define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED (0x80000000)
#endif