ru db8b2a901c Under a heavy RX load, at least with D-Link DFE-550TX adapters, ... the driver's RX ring head may fall behind the chip, causing the stuck traffic, disordered packets, etc. Work around this by adopting the technique of resyncing RX head used in dc(4) and xl(4) drivers, but do it in a slightly different place to reduce the number of resyncs needed. Also, set the NIC's RX polling period to a more meaningful value, to stop overloading the PCI bus (this also reduces the number of resyncs by a factor of 3 or more in a long run; the actual number is very dependent on a nature of the traffic). Maintain the statistics counter as the hw.ste_rxsyncs sysctl. In cooperation with: Vsevolod Lobko OK'ed by: ambrisko MFC after: 5 days		2004-03-31 21:10:01 +00:00
..
agp_ali.c
agp_amd.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
agp_i810.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
agp_if.m
agp_intel.c	Recognise the 82845G AGP bridge, and poke it appropriately at	2004-03-13 16:06:32 +00:00
agp_nvidia.c
agp_sis.c
agp_via.c
agp.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
agppriv.h
agpreg.h
agpvar.h
alpm.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
amdpm.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
cy_pci.c
dc21040reg.h
if_dc.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_dcreg.h
if_de.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_devar.h
if_mn.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_pcn.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_pcnreg.h
if_rl.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_rlreg.h
if_sf.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_sfreg.h
if_sis.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_sisreg.h
if_sk.c	Support the D-Link DGE-530T. Mine appears to have a blank eeprom, so assume	2004-03-31 12:35:51 +00:00
if_skreg.h	Support the D-Link DGE-530T. Mine appears to have a blank eeprom, so assume	2004-03-31 12:35:51 +00:00
if_ste.c	Under a heavy RX load, at least with D-Link DFE-550TX adapters,	2004-03-31 21:10:01 +00:00
if_stereg.h	Added polling(4) support for ste(4).	2004-03-31 20:39:20 +00:00
if_ti.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_tireg.h
if_tl.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_tlreg.h
if_vr.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_vrreg.h
if_wb.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
if_wbreg.h
if_xl.c	solid reports that it is buggy *and* that it slows down transmit	2004-03-19 23:20:23 +00:00
if_xlreg.h
intpm.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
intpmreg.h
locate.pl
ncr.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
ncrreg.h
ti_fw2.h
ti_fw.h
viapm.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
xmaciireg.h
xrpu.c	Convert callers to the new bus_alloc_resource_any(9) API.	2004-03-17 17:50:55 +00:00
yukonreg.h