freebsd-skq/sys/opencrypto/criov.c
John-Mark Gurney 08fca7a56b Add some new modes to OpenCrypto. These modes are AES-ICM (can be used
for counter mode), and AES-GCM.  Both of these modes have been added to
the aesni module.

Included is a set of tests to validate that the software and aesni
module calculate the correct values.  These use the NIST KAT test
vectors.  To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors.  Using a port
is necessary as the test vectors are around 25MB.

All the man pages were updated.  I have added a new man page, crypto.7,
which includes a description of how to use each mode.  All the new modes
and some other AES modes are present.  It would be good for someone
else to go through and document the other modes.

A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.

Add a timing safe bcmp for use to compare MACs.  Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.

Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place.  The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.

We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.

Obtained from:	p4: //depot/projects/opencrypto
Relnotes:	yes
Sponsored by:	FreeBSD Foundation
Sponsored by:	NetGate
2014-12-12 19:56:36 +00:00

239 lines
5.7 KiB
C

/* $OpenBSD: criov.c,v 1.9 2002/01/29 15:48:29 jason Exp $ */
/*-
* Copyright (c) 1999 Theo de Raadt
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/errno.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/mbuf.h>
#include <sys/uio.h>
#include <opencrypto/cryptodev.h>
/*
* This macro is only for avoiding code duplication, as we need to skip
* given number of bytes in the same way in three functions below.
*/
#define CUIO_SKIP() do { \
KASSERT(off >= 0, ("%s: off %d < 0", __func__, off)); \
KASSERT(len >= 0, ("%s: len %d < 0", __func__, len)); \
while (off > 0) { \
KASSERT(iol >= 0, ("%s: empty in skip", __func__)); \
if (off < iov->iov_len) \
break; \
off -= iov->iov_len; \
iol--; \
iov++; \
} \
} while (0)
void
cuio_copydata(struct uio* uio, int off, int len, caddr_t cp)
{
struct iovec *iov = uio->uio_iov;
int iol = uio->uio_iovcnt;
unsigned count;
CUIO_SKIP();
while (len > 0) {
KASSERT(iol >= 0, ("%s: empty", __func__));
count = min(iov->iov_len - off, len);
bcopy(((caddr_t)iov->iov_base) + off, cp, count);
len -= count;
cp += count;
off = 0;
iol--;
iov++;
}
}
void
cuio_copyback(struct uio* uio, int off, int len, caddr_t cp)
{
struct iovec *iov = uio->uio_iov;
int iol = uio->uio_iovcnt;
unsigned count;
CUIO_SKIP();
while (len > 0) {
KASSERT(iol >= 0, ("%s: empty", __func__));
count = min(iov->iov_len - off, len);
bcopy(cp, ((caddr_t)iov->iov_base) + off, count);
len -= count;
cp += count;
off = 0;
iol--;
iov++;
}
}
/*
* Return the index and offset of location in iovec list.
*/
int
cuio_getptr(struct uio *uio, int loc, int *off)
{
int ind, len;
ind = 0;
while (loc >= 0 && ind < uio->uio_iovcnt) {
len = uio->uio_iov[ind].iov_len;
if (len > loc) {
*off = loc;
return (ind);
}
loc -= len;
ind++;
}
if (ind > 0 && loc == 0) {
ind--;
*off = uio->uio_iov[ind].iov_len;
return (ind);
}
return (-1);
}
/*
* Apply function f to the data in an iovec list starting "off" bytes from
* the beginning, continuing for "len" bytes.
*/
int
cuio_apply(struct uio *uio, int off, int len, int (*f)(void *, void *, u_int),
void *arg)
{
struct iovec *iov = uio->uio_iov;
int iol = uio->uio_iovcnt;
unsigned count;
int rval;
CUIO_SKIP();
while (len > 0) {
KASSERT(iol >= 0, ("%s: empty", __func__));
count = min(iov->iov_len - off, len);
rval = (*f)(arg, ((caddr_t)iov->iov_base) + off, count);
if (rval)
return (rval);
len -= count;
off = 0;
iol--;
iov++;
}
return (0);
}
void
crypto_copyback(int flags, caddr_t buf, int off, int size, caddr_t in)
{
if ((flags & CRYPTO_F_IMBUF) != 0)
m_copyback((struct mbuf *)buf, off, size, in);
else if ((flags & CRYPTO_F_IOV) != 0)
cuio_copyback((struct uio *)buf, off, size, in);
else
bcopy(in, buf + off, size);
}
void
crypto_copydata(int flags, caddr_t buf, int off, int size, caddr_t out)
{
if ((flags & CRYPTO_F_IMBUF) != 0)
m_copydata((struct mbuf *)buf, off, size, out);
else if ((flags & CRYPTO_F_IOV) != 0)
cuio_copydata((struct uio *)buf, off, size, out);
else
bcopy(buf + off, out, size);
}
int
crypto_apply(int flags, caddr_t buf, int off, int len,
int (*f)(void *, void *, u_int), void *arg)
{
int error;
if ((flags & CRYPTO_F_IMBUF) != 0)
error = m_apply((struct mbuf *)buf, off, len, f, arg);
else if ((flags & CRYPTO_F_IOV) != 0)
error = cuio_apply((struct uio *)buf, off, len, f, arg);
else
error = (*f)(arg, buf + off, len);
return (error);
}
void
crypto_mbuftoiov(struct mbuf *mbuf, struct iovec **iovptr, int *cnt,
int *allocated)
{
struct iovec *iov;
struct mbuf *m, *mtmp;
int i, j;
*allocated = 0;
iov = *iovptr;
if (iov == NULL)
*cnt = 0;
m = mbuf;
i = 0;
while (m != NULL) {
if (i == *cnt) {
/* we need to allocate a larger array */
j = 1;
mtmp = m;
while ((mtmp = mtmp->m_next) != NULL)
j++;
iov = malloc(sizeof *iov * (i + j), M_CRYPTO_DATA,
M_WAITOK);
*allocated = 1;
*cnt = i + j;
memcpy(iov, *iovptr, sizeof *iov * i);
}
iov[i].iov_base = m->m_data;
iov[i].iov_len = m->m_len;
i++;
m = m->m_next;
}
if (*allocated)
KASSERT(*cnt == i, ("did not allocate correct amount: %d != %d",
*cnt, i));
*iovptr = iov;
*cnt = i;
}