d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
deee1de4bf
freebsd-skq/sys/dev/usb/net/if_smscreg.h
Oleksandr Tymoshenko b011f8c450 Merging of projects/armv6, part 5 
- Driver for SMSC LAN95XX and LAN8710A ethernet controllers
- Driver for LAN8710A PHY

Submitted by:	Ben Gray, Damjan Marion, Tim Kientzle
2012-08-15 04:03:55 +00:00

278 lines
11 KiB
C
Raw Blame History

/*-
* Copyright (c) 2012
* Ben Gray <bgray@freebsd.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _IF_SMSCREG_H_
#define _IF_SMSCREG_H_
/*
* Definitions for the SMSC LAN9514 and LAN9514 USB to ethernet controllers.
*
* This information was gleaned from the SMSC driver in the linux kernel, where
* it is Copyrighted (C) 2007-2008 SMSC.
*
*/
/**
* TRANSMIT FRAMES
* ---------------
* Tx frames are prefixed with an 8-byte header which describes the frame
*
* 4 bytes 4 bytes variable
* +------------+------------+--- . . . . . . . . . . . . ---+
* | TX_CTRL_0 | TX_CTRL_1 | Ethernet frame data |
* +------------+------------+--- . . . . . . . . . . . . ---+
*
* Where the headers have the following fields:
*
* TX_CTRL_0 <20:16> Data offset
* TX_CTRL_0 <13> First segment of frame indicator
* TX_CTRL_0 <12> Last segment of frame indicator
* TX_CTRL_0 <10:0> Buffer size (?)
*
* TX_CTRL_1 <14> Perform H/W checksuming on IP packets
* TX_CTRL_1 <13> Disable automatic ethernet CRC generation
* TX_CTRL_1 <12> Disable padding (?)
* TX_CTRL_1 <10:0> Packet byte length
*
*/
#define SMSC_TX_CTRL_0_OFFSET(x) (((x) & 0x1FUL) << 16)
#define SMSC_TX_CTRL_0_FIRST_SEG (0x1UL << 13)
#define SMSC_TX_CTRL_0_LAST_SEG (0x1UL << 12)
#define SMSC_TX_CTRL_0_BUF_SIZE(x) ((x) & 0x000007FFUL)
#define SMSC_TX_CTRL_1_CSUM_ENABLE (0x1UL << 14)
#define SMSC_TX_CTRL_1_CRC_DISABLE (0x1UL << 13)
#define SMSC_TX_CTRL_1_PADDING_DISABLE (0x1UL << 12)
#define SMSC_TX_CTRL_1_PKT_LENGTH(x) ((x) & 0x000007FFUL)
/**
* RECEIVE FRAMES
* --------------
* Rx frames are prefixed with an 4-byte status header which describes any
* errors with the frame as well as things like the length
*
* 4 bytes variable
* +------------+--- . . . . . . . . . . . . ---+
* | RX_STAT | Ethernet frame data |
* +------------+--- . . . . . . . . . . . . ---+
*
* Where the status header has the following fields:
*
* RX_STAT <30> Filter Fail
* RX_STAT <29:16> Frame Length
* RX_STAT <15> Error Summary
* RX_STAT <13> Broadcast Frame
* RX_STAT <12> Length Error
* RX_STAT <11> Runt Frame
* RX_STAT <10> Multicast Frame
* RX_STAT <7> Frame too long
* RX_STAT <6> Collision Seen
* RX_STAT <5> Frame Type
* RX_STAT <4> Receive Watchdog
* RX_STAT <3> Mii Error
* RX_STAT <2> Dribbling
* RX_STAT <1> CRC Error
*
*/
#define SMSC_RX_STAT_FILTER_FAIL (0x1UL << 30)
#define SMSC_RX_STAT_FRM_LENGTH(x) (((x) >> 16) & 0x3FFFUL)
#define SMSC_RX_STAT_ERROR (0x1UL << 15)
#define SMSC_RX_STAT_BROADCAST (0x1UL << 13)
#define SMSC_RX_STAT_LENGTH_ERROR (0x1UL << 12)
#define SMSC_RX_STAT_RUNT (0x1UL << 11)
#define SMSC_RX_STAT_MULTICAST (0x1UL << 10)
#define SMSC_RX_STAT_FRM_TO_LONG (0x1UL << 7)
#define SMSC_RX_STAT_COLLISION (0x1UL << 6)
#define SMSC_RX_STAT_FRM_TYPE (0x1UL << 5)
#define SMSC_RX_STAT_WATCHDOG (0x1UL << 4)
#define SMSC_RX_STAT_MII_ERROR (0x1UL << 3)
#define SMSC_RX_STAT_DRIBBLING (0x1UL << 2)
#define SMSC_RX_STAT_CRC_ERROR (0x1UL << 1)
/**
* REGISTERS
*
*/
#define SMSC_ID_REV 0x000
#define SMSC_INTR_STATUS 0x008
#define SMSC_RX_CFG 0x00C
#define SMSC_TX_CFG 0x010
#define SMSC_HW_CFG 0x014
#define SMSC_PM_CTRL 0x020
#define SMSC_LED_GPIO_CFG 0x024
#define SMSC_GPIO_CFG 0x028
#define SMSC_AFC_CFG 0x02C
#define SMSC_EEPROM_CMD 0x030
#define SMSC_EEPROM_DATA 0x034
#define SMSC_BURST_CAP 0x038
#define SMSC_GPIO_WAKE 0x064
#define SMSC_INTR_CFG 0x068
#define SMSC_BULK_IN_DLY 0x06C
#define SMSC_MAC_CSR 0x100
#define SMSC_MAC_ADDRH 0x104
#define SMSC_MAC_ADDRL 0x108
#define SMSC_HASHH 0x10C
#define SMSC_HASHL 0x110
#define SMSC_MII_ADDR 0x114
#define SMSC_MII_DATA 0x118
#define SMSC_FLOW 0x11C
#define SMSC_VLAN1 0x120
#define SMSC_VLAN2 0x124
#define SMSC_WUFF 0x128
#define SMSC_WUCSR 0x12C
#define SMSC_COE_CTRL 0x130
/* ID / Revision register */
#define SMSC_ID_REV_CHIP_ID_MASK 0xFFFF0000UL
#define SMSC_ID_REV_CHIP_REV_MASK 0x0000FFFFUL
#define SMSC_RX_FIFO_FLUSH (0x1UL << 0)
#define SMSC_TX_CFG_ON (0x1UL << 2)
#define SMSC_TX_CFG_STOP (0x1UL << 1)
#define SMSC_TX_CFG_FIFO_FLUSH (0x1UL << 0)
#define SMSC_HW_CFG_BIR (0x1UL << 12)
#define SMSC_HW_CFG_LEDB (0x1UL << 11)
#define SMSC_HW_CFG_RXDOFF (0x3UL << 9) /* RX pkt alignment */
#define SMSC_HW_CFG_DRP (0x1UL << 6)
#define SMSC_HW_CFG_MEF (0x1UL << 5)
#define SMSC_HW_CFG_LRST (0x1UL << 3) /* Lite reset */
#define SMSC_HW_CFG_PSEL (0x1UL << 2)
#define SMSC_HW_CFG_BCE (0x1UL << 1)
#define SMSC_HW_CFG_SRST (0x1UL << 0)
#define SMSC_PM_CTRL_PHY_RST (0x1UL << 4) /* PHY reset */
#define SMSC_LED_GPIO_CFG_SPD_LED (0x1UL << 24)
#define SMSC_LED_GPIO_CFG_LNK_LED (0x1UL << 20)
#define SMSC_LED_GPIO_CFG_FDX_LED (0x1UL << 16)
/* Hi watermark = 15.5Kb (~10 mtu pkts) */
/* low watermark = 3k (~2 mtu pkts) */
/* backpressure duration = ~ 350us */
/* Apply FC on any frame. */
#define AFC_CFG_DEFAULT (0x00F830A1)
#define SMSC_EEPROM_CMD_BUSY (0x1UL << 31)
#define SMSC_EEPROM_CMD_MASK (0x7UL << 28)
#define SMSC_EEPROM_CMD_READ (0x0UL << 28)
#define SMSC_EEPROM_CMD_WRITE (0x3UL << 28)
#define SMSC_EEPROM_CMD_ERASE (0x5UL << 28)
#define SMSC_EEPROM_CMD_RELOAD (0x7UL << 28)
#define SMSC_EEPROM_CMD_TIMEOUT (0x1UL << 10)
#define SMSC_EEPROM_CMD_ADDR_MASK 0x000001FFUL
/* MAC Control and Status Register */
#define SMSC_MAC_CSR_RCVOWN (0x1UL << 23) /* Half duplex */
#define SMSC_MAC_CSR_LOOPBK (0x1UL << 21) /* Loopback */
#define SMSC_MAC_CSR_FDPX (0x1UL << 20) /* Full duplex */
#define SMSC_MAC_CSR_MCPAS (0x1UL << 19) /* Multicast mode */
#define SMSC_MAC_CSR_PRMS (0x1UL << 18) /* Promiscuous mode */
#define SMSC_MAC_CSR_INVFILT (0x1UL << 17) /* Inverse filtering */
#define SMSC_MAC_CSR_PASSBAD (0x1UL << 16) /* Pass on bad frames */
#define SMSC_MAC_CSR_HPFILT (0x1UL << 13) /* Hash filtering */
#define SMSC_MAC_CSR_BCAST (0x1UL << 11) /* Broadcast */
#define SMSC_MAC_CSR_TXEN (0x1UL << 3) /* TX enable */
#define SMSC_MAC_CSR_RXEN (0x1UL << 2) /* RX enable */
/* Interrupt control register */
#define SMSC_INTR_NTEP (0x1UL << 31)
#define SMSC_INTR_MACRTO (0x1UL << 19)
#define SMSC_INTR_TX_STOP (0x1UL << 17)
#define SMSC_INTR_RX_STOP (0x1UL << 16)
#define SMSC_INTR_PHY_INT (0x1UL << 15)
#define SMSC_INTR_TXE (0x1UL << 14)
#define SMSC_INTR_TDFU (0x1UL << 13)
#define SMSC_INTR_TDFO (0x1UL << 12)
#define SMSC_INTR_RXDF (0x1UL << 11)
#define SMSC_INTR_GPIOS 0x000007FFUL
/* Phy MII interface register */
#define SMSC_MII_WRITE (0x1UL << 1)
#define SMSC_MII_READ (0x0UL << 1)
#define SMSC_MII_BUSY (0x1UL << 0)
/* H/W checksum register */
#define SMSC_COE_CTRL_TX_EN (0x1UL << 16) /* Tx H/W csum enable */
#define SMSC_COE_CTRL_RX_MODE (0x1UL << 1)
#define SMSC_COE_CTRL_RX_EN (0x1UL << 0) /* Rx H/W csum enable */
/* Registers on the phy, accessed via MII/MDIO */
#define SMSC_PHY_INTR_STAT (29)
#define SMSC_PHY_INTR_MASK (30)
#define SMSC_PHY_INTR_ENERGY_ON (0x1U << 7)
#define SMSC_PHY_INTR_ANEG_COMP (0x1U << 6)
#define SMSC_PHY_INTR_REMOTE_FAULT (0x1U << 5)
#define SMSC_PHY_INTR_LINK_DOWN (0x1U << 4)
/* USB Vendor Requests */
#define SMSC_UR_WRITE_REG 0xA0
#define SMSC_UR_READ_REG 0xA1
#define SMSC_UR_GET_STATS 0xA2
#define SMSC_CONFIG_INDEX 0 /* config number 1 */
#define SMSC_IFACE_IDX 0
/*
* USB endpoints.
*/
enum {
SMSC_BULK_DT_RD,
SMSC_BULK_DT_WR,
/* the LAN9514 device does support interrupt endpoints, however I couldn't
* get then to work reliably and since they are unneeded (poll the mii
* status) they are unused.
* SMSC_INTR_DT_WR,
* SMSC_INTR_DT_RD,
*/
SMSC_N_TRANSFER,
};
struct smsc_softc {
struct usb_ether sc_ue;
struct mtx sc_mtx;
struct usb_xfer *sc_xfer[SMSC_N_TRANSFER];
int sc_phyno;
/* The following stores the settings in the mac control (MAC_CSR) register */
uint32_t sc_mac_csr;
uint32_t sc_rev_id;
uint32_t sc_flags;
#define SMSC_FLAG_LINK 0x0001
#define SMSC_FLAG_LAN9514 0x1000 /* LAN9514 */
};
#define SMSC_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define SMSC_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define SMSC_LOCK_ASSERT(_sc, t) mtx_assert(&(_sc)->sc_mtx, t)
#endif /* _IF_SMSCREG_H_ */
Reference in New Issue View Git Blame Copy Permalink