df9ab5b30f
- Add support for memory mapped I/O. - Use DMA to get SCBs down to the adapters. - Remove old paging code. - Be much smarter about how we allocate SCB space. The old, simple method wasted almost half a page per SCB. Ooops. - Make command complete interrupt processing more efficient. - Break the monolithic ahc_intr into sub-routines. The sub-routines handle rare, special case events so the function call is not a penalty and the removal of the code from the main routine most likely improves performance instruction prefech will work better and less code is pushed into the cache. - Never, ever allow tagged queueing if a device has disconnection disabled. - Clean up and simplify timeout code. Many of the changes are to handle the new DMA scheme.
315 lines
10 KiB
C
315 lines
10 KiB
C
/*
|
|
* Interface to the generic driver for the aic7xxx based adaptec
|
|
* SCSI controllers. This is used to implement product specific
|
|
* probe and attach routines.
|
|
*
|
|
* Copyright (c) 1994, 1995, 1996 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: aic7xxx.h,v 1.28.2.2 1996/10/06 01:31:25 gibbs Exp $
|
|
*/
|
|
|
|
#ifndef _AIC7XXX_H_
|
|
#define _AIC7XXX_H_
|
|
|
|
#if defined(__FreeBSD__)
|
|
#include "ahc.h" /* for NAHC from config */
|
|
#endif
|
|
|
|
#if defined(__NetBSD__)
|
|
/*
|
|
* convert FreeBSD's <sys/queue.h> symbols to NetBSD's
|
|
*/
|
|
#define STAILQ_ENTRY SIMPLEQ_ENTRY
|
|
#define STAILQ_HEAD SIMPLEQ_HEAD
|
|
#define STAILQ_INIT SIMPLEQ_INIT
|
|
#define STAILQ_INSERT_HEAD SIMPLEQ_INSERT_HEAD
|
|
#define STAILQ_INSERT_TAIL SIMPLEQ_INSERT_TAIL
|
|
#define STAILQ_REMOVE_HEAD(head, field) \
|
|
SIMPLEQ_REMOVE_HEAD(head, (head)->sqh_first, field)
|
|
#define stqh_first sqh_first
|
|
#define stqe_next sqe_next
|
|
#endif
|
|
|
|
#if defined(__FreeBSD__)
|
|
#define AHC_INB(ahc, port) \
|
|
(((ahc)->maddr != NULL) ? \
|
|
((ahc)->maddr[port]) : \
|
|
inb((ahc)->baseport+(port)))
|
|
#define AHC_OUTB(ahc, port, val) \
|
|
(((ahc)->maddr != NULL) ? \
|
|
((ahc)->maddr[port] = (val)) : \
|
|
outb((ahc)->baseport+(port), val))
|
|
#define AHC_OUTSB(ahc, port, valp, size) \
|
|
outsb((ahc)->baseport+(port), valp, size)
|
|
#elif defined(__NetBSD__)
|
|
#define AHC_INB(ahc, port) \
|
|
bus_io_read_1((ahc)->sc_bc, (ahc)->sc_ioh, port)
|
|
#define AHC_OUTB(ahc, port, val) \
|
|
bus_io_write_1((ahc)->sc_bc, (ahc)->sc_ioh, port, val)
|
|
#define AHC_OUTSB(ahc, port, valp, size) \
|
|
bus_io_write_multi_1((ahc)->sc_bc, (ahc)->sc_ioh, port, valp, size)
|
|
#endif
|
|
|
|
#define AHC_NSEG 256 /* number of dma segments supported */
|
|
|
|
#define AHC_SCB_MAX 255 /*
|
|
* Up to 255 SCBs on some types of aic7xxx
|
|
* based boards. The aic7870 have 16 internal
|
|
* SCBs, but external SRAM bumps this to 255.
|
|
* The aic7770 family have only 4, and the
|
|
* aic7850 has only 3.
|
|
*/
|
|
|
|
|
|
typedef u_int32_t physaddr;
|
|
#if defined(__FreeBSD__)
|
|
extern u_long ahc_unit;
|
|
#endif
|
|
|
|
struct ahc_dma_seg {
|
|
physaddr addr;
|
|
u_int32_t len;
|
|
};
|
|
|
|
typedef enum {
|
|
AHC_NONE = 0x000,
|
|
AHC_ULTRA = 0x001, /* Supports 20MHz Transfers */
|
|
AHC_WIDE = 0x002, /* Wide Channel */
|
|
AHC_TWIN = 0x008, /* Twin Channel */
|
|
AHC_AIC7770 = 0x010,
|
|
AHC_AIC7850 = 0x020,
|
|
AHC_AIC7860 = 0x021, /* ULTRA version of the aic7850 */
|
|
AHC_AIC7870 = 0x040,
|
|
AHC_AIC7880 = 0x041,
|
|
AHC_AIC78X0 = 0x060, /* PCI Based Controller */
|
|
AHC_274 = 0x110, /* EISA Based Controller */
|
|
AHC_284 = 0x210, /* VL/ISA Based Controller */
|
|
AHC_294AU = 0x421, /* aic7860 based '2940' */
|
|
AHC_294 = 0x440, /* PCI Based Controller */
|
|
AHC_294U = 0x441, /* ULTRA PCI Based Controller */
|
|
AHC_394 = 0x840, /* Twin Channel PCI Controller */
|
|
AHC_394U = 0x841, /* Twin, ULTRA Channel PCI Controller */
|
|
}ahc_type;
|
|
|
|
typedef enum {
|
|
AHC_FNONE = 0x00,
|
|
AHC_INIT = 0x01,
|
|
AHC_RUNNING = 0x02,
|
|
AHC_PAGESCBS = 0x04, /* Enable SCB paging */
|
|
AHC_CHANNEL_B_PRIMARY = 0x08, /*
|
|
* On twin channel adapters, probe
|
|
* channel B first since it is the
|
|
* primary bus.
|
|
*/
|
|
AHC_USEDEFAULTS = 0x10, /*
|
|
* For cards without an seeprom
|
|
* or a BIOS to initialize the chip's
|
|
* SRAM, we use the default target
|
|
* settings.
|
|
*/
|
|
AHC_CHNLB = 0x20, /*
|
|
* Second controller on 3940
|
|
* Also encodes the offset in the
|
|
* SEEPROM for CHNLB info (32)
|
|
*/
|
|
}ahc_flag;
|
|
|
|
typedef enum {
|
|
SCB_FREE = 0x0000,
|
|
SCB_ACTIVE = 0x0001,
|
|
SCB_ABORTED = 0x0002,
|
|
SCB_DEVICE_RESET = 0x0004,
|
|
SCB_IMMED = 0x0008,
|
|
SCB_SENSE = 0x0010,
|
|
SCB_TIMEDOUT = 0x0020,
|
|
SCB_QUEUED_FOR_DONE = 0x0040,
|
|
SCB_PAGED_OUT = 0x0080,
|
|
SCB_WAITINGQ = 0x0100,
|
|
SCB_ASSIGNEDQ = 0x0200,
|
|
SCB_SENTORDEREDTAG = 0x0400,
|
|
SCB_MSGOUT_SDTR = 0x0800,
|
|
SCB_MSGOUT_WDTR = 0x1000
|
|
}scb_flag;
|
|
|
|
/*
|
|
* The driver keeps up to MAX_SCB scb structures per card in memory. The SCB
|
|
* consists of a "hardware SCB" mirroring the fields availible on the card
|
|
* and additional information the kernel stores for each transaction.
|
|
*/
|
|
struct hardware_scb {
|
|
/*0*/ u_int8_t control;
|
|
/*1*/ u_int8_t tcl; /* 4/1/3 bits */
|
|
/*2*/ u_int8_t status;
|
|
/*3*/ u_int8_t SG_segment_count;
|
|
/*4*/ physaddr SG_list_pointer;
|
|
/*8*/ u_int8_t residual_SG_segment_count;
|
|
/*9*/ u_int8_t residual_data_count[3];
|
|
/*12*/ physaddr data;
|
|
/*16*/ u_int32_t datalen; /* Really only three bits, but its
|
|
* faster to treat it as a long on
|
|
* a quad boundary.
|
|
*/
|
|
/*20*/ physaddr cmdpointer;
|
|
/*24*/ u_int8_t cmdlen;
|
|
/*25*/ u_int8_t tag; /* Index into our kernel SCB array.
|
|
* Also used as the tag for tagged I/O
|
|
*/
|
|
#define SCB_PIO_TRANSFER_SIZE 26 /* amount we need to upload/download
|
|
* via PIO to initialize a transaction.
|
|
*/
|
|
/*26*/ u_int8_t next; /* Used for threading SCBs in the
|
|
* "Waiting for Selection" and
|
|
* "Disconnected SCB" lists down
|
|
* in the sequencer.
|
|
*/
|
|
/*27*/ u_int8_t prev;
|
|
|
|
/*28*/ u_int32_t pad; /*
|
|
* Unused by the kernel, but we require
|
|
* the padding so that the array of
|
|
* hardware SCBs is alligned on 32 byte
|
|
* boundaries so the sequencer can
|
|
* index them easily.
|
|
*/
|
|
};
|
|
|
|
struct scb
|
|
{
|
|
struct hardware_scb *hscb;
|
|
STAILQ_ENTRY(scb) links; /* for chaining */
|
|
struct scsi_xfer *xs; /* the scsi_xfer for this cmd */
|
|
scb_flag flags;
|
|
struct ahc_dma_seg *ahc_dma;/* Pointer to SG segments */
|
|
struct scsi_sense sense_cmd;
|
|
u_int8_t position;/* Position in card's scbarray */
|
|
};
|
|
|
|
struct ahc_data {
|
|
#if defined(__FreeBSD__)
|
|
int unit;
|
|
#elif defined(__NetBSD__)
|
|
struct device sc_dev;
|
|
void *sc_ih;
|
|
bus_chipset_tag_t sc_bc;
|
|
bus_io_handle_t sc_ioh;
|
|
#endif
|
|
ahc_type type;
|
|
ahc_flag flags;
|
|
#if defined(__FreeBSD__)
|
|
u_int32_t baseport;
|
|
#endif
|
|
volatile u_int8_t *maddr;
|
|
struct hardware_scb *hscbs; /* Array of hardware SCBs */
|
|
struct scb *scbarray[AHC_SCB_MAX]; /* Array of kernel SCBs */
|
|
STAILQ_HEAD(, scb) free_scbs; /*
|
|
* Pool of SCBs ready to be assigned
|
|
* commands to execute.
|
|
*/
|
|
STAILQ_HEAD(, scb) waiting_scbs;/*
|
|
* SCBs waiting ready to go but
|
|
* waiting for space in the QINFIFO.
|
|
*/
|
|
struct scsi_link sc_link;
|
|
struct scsi_link sc_link_b; /* Second bus for Twin channel cards */
|
|
u_int16_t needsdtr_orig; /* Targets we initiate sync neg with */
|
|
u_int16_t needwdtr_orig; /* Targets we initiate wide neg with */
|
|
u_int16_t needsdtr; /* Current list of negotiated targets */
|
|
u_int16_t needwdtr; /* Current list of negotiated targets */
|
|
u_int16_t sdtrpending; /* Pending SDTR to these targets */
|
|
u_int16_t wdtrpending; /* Pending WDTR to these targets */
|
|
u_int16_t tagenable; /* Targets that can handle tags */
|
|
u_int16_t orderedtag; /* Targets to use ordered tag on */
|
|
u_int16_t discenable; /* Targets allowed to disconnect */
|
|
u_int8_t our_id; /* our scsi id */
|
|
u_int8_t our_id_b; /* B channel scsi id */
|
|
u_int8_t numscbs;
|
|
u_int8_t activescbs;
|
|
u_int8_t maxhscbs; /* Number of SCBs on the card */
|
|
u_int8_t maxscbs; /*
|
|
* Max SCBs we allocate total including
|
|
* any that will force us to page SCBs
|
|
*/
|
|
u_int8_t qcntmask; /*
|
|
* Mask of valid registers in the
|
|
* Q*CNT registers.
|
|
*/
|
|
u_int8_t qfullcount; /*
|
|
* The maximum number of entries
|
|
* storable in the Q*FIFOs.
|
|
*/
|
|
u_int8_t curqincnt; /*
|
|
* The current value we "think" the
|
|
* QINCNT has. The reason it is
|
|
* "think" is that this is a cached
|
|
* value that is only updated when
|
|
* curqincount == qfullcount to reduce
|
|
* the amount of accesses made to the
|
|
* card.
|
|
*/
|
|
u_int8_t unpause;
|
|
u_int8_t pause;
|
|
u_int8_t in_timeout;
|
|
};
|
|
|
|
/* #define AHC_DEBUG */
|
|
#ifdef AHC_DEBUG
|
|
/* Different debugging levels used when AHC_DEBUG is defined */
|
|
#define AHC_SHOWMISC 0x0001
|
|
#define AHC_SHOWCMDS 0x0002
|
|
#define AHC_SHOWSCBS 0x0004
|
|
#define AHC_SHOWABORTS 0x0008
|
|
#define AHC_SHOWSENSE 0x0010
|
|
#define AHC_SHOWSCBCNT 0x0020
|
|
|
|
extern int ahc_debug; /* Initialized in i386/scsi/aic7xxx.c */
|
|
#endif
|
|
|
|
#if defined(__FreeBSD__)
|
|
|
|
char *ahc_name __P((struct ahc_data *ahc));
|
|
|
|
void ahc_reset __P((u_int32_t iobase));
|
|
struct ahc_data *ahc_alloc __P((int unit, u_int32_t io_base, vm_offset_t maddr, ahc_type type, ahc_flag flags));
|
|
#elif defined(__NetBSD__)
|
|
|
|
#define ahc_name(ahc) (ahc)->sc_dev.dv_xname
|
|
|
|
void ahc_reset __P((char *devname, bus_chipset_tag_t bc, bus_io_handle_t ioh));
|
|
void ahc_construct __P((struct ahc_data *ahc, bus_chipset_tag_t bc, bus_io_handle_t ioh, ahc_type type, ahc_flag flags));
|
|
#endif
|
|
void ahc_free __P((struct ahc_data *));
|
|
int ahc_init __P((struct ahc_data *));
|
|
int ahc_attach __P((struct ahc_data *));
|
|
#if defined(__FreeBSD__)
|
|
void ahc_intr __P((void *arg));
|
|
#elif defined(__NetBSD__)
|
|
int ahc_intr __P((void *arg));
|
|
#endif
|
|
|
|
#endif /* _AIC7XXX_H_ */
|