Various fixes for suspend and resume of PCI to PCI and PCI to Cardbus
bridges.
274633:
Remove stray empty comment. The code is adequately explained in the
block comment above, so there's nothing to add here.
274639:
Modernize comments about BIOSes being lame since in this detail they
aren't lame, the rules changed along the way. Catch up to 1999 or so
with the new rules.
274663:
Fix typo pointed out by avg@ and Joerg Sonnenberger. Add a clarifying
sentence too.
277233:
Suspend and resume were the only two functions not to follow the brdev
convention here, so fix that.
277234:
Move the suspsned and resume functions to the bus attachment. They
were accessing PCI config registers, which won't work for the ISA
version.
277235:
Always enable I/O, memory and dma cycles. Some BIOSes don't enable
them, sometimes they are reset for power state transitions or during
whatever happens while suspended. Also, it is good practice to always
do this.
281870:
Cosmetic change: use PCIR_SECLAT_2 rather than PCIR_SECLAT_1.
281871:
The minimim grant and maximum latency PCI config registers are only valid
for type 0 devices, not type 1 or 2 bridges. Don't read them for bridge
devices during bus scans and return an error when attempting to read them
as ivars for bridge devices.
281873:
Don't explicitly manage power states for PCI-PCI bridge devices in the
driver's suspend and resume routines. These have been redundant no-ops
since r214065 changed the PCI bus driver to manage power states for
all devices (including type 1/2 bridge devices) during suspend and resume.
281874:
Update the pci_cfg_save/restore routines to operate on bridge devices
(type 1 and type 2) as well as leaf devices (type 0). In particular,
this allows the existing PCI bus logic to save and restore capability
registers such as MSI and PCI-express work for bridge devices rather than
requiring that code to be duplicated in bridge drivers. It also means
that bridge drivers no longer need to save and restore basic registers
such as the PCI command register or BARs nor manage powerstates for the
bridge device.
While here, pci_setup_secbus() has been changed to initialize the 'sec'
and 'sub' fields in the 'secbus' structure instead of requiring the pcib
and pccbb drivers to do this in the NEW_PCIB + PCI_RES_BUS case.
ea5a6516ae