8797c3d838
Hide unused code under #ifdef notyet (in one case the only caller is under that same ifdef), or if it is arm (not arm64) specific code under the __arm__ ifdef to not yield -Wunused-function warnings during the arm64 kernel compile. MFC after: 2 weeks
481 lines
12 KiB
C
481 lines
12 KiB
C
/*-
|
|
* Copyright (c) 2012 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/timeet.h>
|
|
#include <sys/timetc.h>
|
|
#include <sys/watchdog.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
#include <machine/machdep.h>
|
|
|
|
#include <dev/ofw/openfirm.h>
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <dev/extres/clk/clk.h>
|
|
|
|
#if defined(__aarch64__)
|
|
#include "opt_soc.h"
|
|
#else
|
|
#include <arm/allwinner/aw_machdep.h>
|
|
#endif
|
|
|
|
/**
|
|
* Timer registers addr
|
|
*
|
|
*/
|
|
#define TIMER_IRQ_EN_REG 0x00
|
|
#define TIMER_IRQ_ENABLE(x) (1 << x)
|
|
|
|
#define TIMER_IRQ_STA_REG 0x04
|
|
#define TIMER_IRQ_PENDING(x) (1 << x)
|
|
|
|
/*
|
|
* On A10, A13, A20 and A31/A31s 6 timers are available
|
|
*/
|
|
#define TIMER_CTRL_REG(x) (0x10 + 0x10 * x)
|
|
#define TIMER_CTRL_START (1 << 0)
|
|
#define TIMER_CTRL_AUTORELOAD (1 << 1)
|
|
#define TIMER_CTRL_CLKSRC_MASK (3 << 2)
|
|
#define TIMER_CTRL_OSC24M (1 << 2)
|
|
#define TIMER_CTRL_PRESCALAR_MASK (0x7 << 4)
|
|
#define TIMER_CTRL_PRESCALAR(x) ((x - 1) << 4)
|
|
#define TIMER_CTRL_MODE_MASK (1 << 7)
|
|
#define TIMER_CTRL_MODE_SINGLE (1 << 7)
|
|
#define TIMER_CTRL_MODE_CONTINUOUS (0 << 7)
|
|
#define TIMER_INTV_REG(x) (0x14 + 0x10 * x)
|
|
#define TIMER_CURV_REG(x) (0x18 + 0x10 * x)
|
|
|
|
/* 64 bit counter, available in A10 and A13 */
|
|
#define CNT64_CTRL_REG 0xa0
|
|
#define CNT64_CTRL_RL_EN 0x02 /* read latch enable */
|
|
#define CNT64_LO_REG 0xa4
|
|
#define CNT64_HI_REG 0xa8
|
|
|
|
#define SYS_TIMER_CLKSRC 24000000 /* clock source */
|
|
|
|
enum a10_timer_type {
|
|
A10_TIMER = 1,
|
|
A23_TIMER,
|
|
};
|
|
|
|
struct a10_timer_softc {
|
|
device_t sc_dev;
|
|
struct resource *res[2];
|
|
void *sc_ih; /* interrupt handler */
|
|
uint32_t sc_period;
|
|
uint64_t timer0_freq;
|
|
struct eventtimer et;
|
|
enum a10_timer_type type;
|
|
};
|
|
|
|
#define timer_read_4(sc, reg) \
|
|
bus_read_4(sc->res[A10_TIMER_MEMRES], reg)
|
|
#define timer_write_4(sc, reg, val) \
|
|
bus_write_4(sc->res[A10_TIMER_MEMRES], reg, val)
|
|
|
|
static u_int a10_timer_get_timecount(struct timecounter *);
|
|
#if defined(__arm__)
|
|
static int a10_timer_timer_start(struct eventtimer *,
|
|
sbintime_t first, sbintime_t period);
|
|
static int a10_timer_timer_stop(struct eventtimer *);
|
|
#endif
|
|
|
|
static uint64_t timer_read_counter64(struct a10_timer_softc *sc);
|
|
#if defined(__arm__)
|
|
static void a10_timer_eventtimer_setup(struct a10_timer_softc *sc);
|
|
#endif
|
|
|
|
static void a23_timer_timecounter_setup(struct a10_timer_softc *sc);
|
|
static u_int a23_timer_get_timecount(struct timecounter *tc);
|
|
|
|
static int a10_timer_irq(void *);
|
|
static int a10_timer_probe(device_t);
|
|
static int a10_timer_attach(device_t);
|
|
|
|
#if defined(__arm__)
|
|
static delay_func a10_timer_delay;
|
|
#endif
|
|
|
|
static struct timecounter a10_timer_timecounter = {
|
|
.tc_name = "a10_timer timer0",
|
|
.tc_get_timecount = a10_timer_get_timecount,
|
|
.tc_counter_mask = ~0u,
|
|
.tc_frequency = 0,
|
|
.tc_quality = 1000,
|
|
};
|
|
|
|
static struct timecounter a23_timer_timecounter = {
|
|
.tc_name = "a10_timer timer0",
|
|
.tc_get_timecount = a23_timer_get_timecount,
|
|
.tc_counter_mask = ~0u,
|
|
.tc_frequency = 0,
|
|
/* We want it to be selected over the arm generic timecounter */
|
|
.tc_quality = 2000,
|
|
};
|
|
|
|
#define A10_TIMER_MEMRES 0
|
|
#define A10_TIMER_IRQRES 1
|
|
|
|
static struct resource_spec a10_timer_spec[] = {
|
|
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
|
|
{ SYS_RES_IRQ, 0, RF_ACTIVE },
|
|
{ -1, 0 }
|
|
};
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{"allwinner,sun4i-a10-timer", A10_TIMER},
|
|
{"allwinner,sun8i-a23-timer", A23_TIMER},
|
|
{NULL, 0},
|
|
};
|
|
|
|
static int
|
|
a10_timer_probe(device_t dev)
|
|
{
|
|
struct a10_timer_softc *sc;
|
|
#if defined(__arm__)
|
|
u_int soc_family;
|
|
#endif
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
|
|
return (ENXIO);
|
|
|
|
#if defined(__arm__)
|
|
/* For SoC >= A10 we have the ARM Timecounter/Eventtimer */
|
|
soc_family = allwinner_soc_family();
|
|
if (soc_family != ALLWINNERSOC_SUN4I &&
|
|
soc_family != ALLWINNERSOC_SUN5I)
|
|
return (ENXIO);
|
|
#endif
|
|
|
|
device_set_desc(dev, "Allwinner timer");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
a10_timer_attach(device_t dev)
|
|
{
|
|
struct a10_timer_softc *sc;
|
|
clk_t clk;
|
|
int err;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->type = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
|
|
|
|
if (bus_alloc_resources(dev, a10_timer_spec, sc->res)) {
|
|
device_printf(dev, "could not allocate resources\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
sc->sc_dev = dev;
|
|
|
|
/* Setup and enable the timer interrupt */
|
|
err = bus_setup_intr(dev, sc->res[A10_TIMER_IRQRES], INTR_TYPE_CLK,
|
|
a10_timer_irq, NULL, sc, &sc->sc_ih);
|
|
if (err != 0) {
|
|
bus_release_resources(dev, a10_timer_spec, sc->res);
|
|
device_printf(dev, "Unable to setup the clock irq handler, "
|
|
"err = %d\n", err);
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (clk_get_by_ofw_index(dev, 0, 0, &clk) != 0)
|
|
sc->timer0_freq = SYS_TIMER_CLKSRC;
|
|
else {
|
|
if (clk_get_freq(clk, &sc->timer0_freq) != 0) {
|
|
device_printf(dev, "Cannot get clock source frequency\n");
|
|
return (ENXIO);
|
|
}
|
|
}
|
|
|
|
#if defined(__arm__)
|
|
a10_timer_eventtimer_setup(sc);
|
|
arm_set_delay(a10_timer_delay, sc);
|
|
a10_timer_timecounter.tc_priv = sc;
|
|
a10_timer_timecounter.tc_frequency = sc->timer0_freq;
|
|
tc_init(&a10_timer_timecounter);
|
|
#elif defined(__aarch64__)
|
|
a23_timer_timecounter_setup(sc);
|
|
#endif
|
|
|
|
if (bootverbose) {
|
|
device_printf(sc->sc_dev, "clock: hz=%d stathz = %d\n", hz, stathz);
|
|
|
|
device_printf(sc->sc_dev, "event timer clock frequency %ju\n",
|
|
sc->timer0_freq);
|
|
device_printf(sc->sc_dev, "timecounter clock frequency %jd\n",
|
|
a10_timer_timecounter.tc_frequency);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
a10_timer_irq(void *arg)
|
|
{
|
|
struct a10_timer_softc *sc;
|
|
uint32_t val;
|
|
|
|
sc = (struct a10_timer_softc *)arg;
|
|
|
|
/* Clear interrupt pending bit. */
|
|
timer_write_4(sc, TIMER_IRQ_STA_REG, TIMER_IRQ_PENDING(0));
|
|
|
|
val = timer_read_4(sc, TIMER_CTRL_REG(0));
|
|
|
|
/*
|
|
* Disabled autoreload and sc_period > 0 means
|
|
* timer_start was called with non NULL first value.
|
|
* Now we will set periodic timer with the given period
|
|
* value.
|
|
*/
|
|
if ((val & (1<<1)) == 0 && sc->sc_period > 0) {
|
|
/* Update timer */
|
|
timer_write_4(sc, TIMER_CURV_REG(0), sc->sc_period);
|
|
|
|
/* Make periodic and enable */
|
|
val |= TIMER_CTRL_AUTORELOAD | TIMER_CTRL_START;
|
|
timer_write_4(sc, TIMER_CTRL_REG(0), val);
|
|
}
|
|
|
|
if (sc->et.et_active)
|
|
sc->et.et_event_cb(&sc->et, sc->et.et_arg);
|
|
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
/*
|
|
* Event timer function for A10 and A13
|
|
*/
|
|
|
|
#if defined(__arm__)
|
|
static void
|
|
a10_timer_eventtimer_setup(struct a10_timer_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
/* Set clock source to OSC24M, 1 pre-division, continuous mode */
|
|
val = timer_read_4(sc, TIMER_CTRL_REG(0));
|
|
val &= ~TIMER_CTRL_PRESCALAR_MASK | ~TIMER_CTRL_MODE_MASK | ~TIMER_CTRL_CLKSRC_MASK;
|
|
val |= TIMER_CTRL_PRESCALAR(1) | TIMER_CTRL_OSC24M;
|
|
timer_write_4(sc, TIMER_CTRL_REG(0), val);
|
|
|
|
/* Enable timer0 */
|
|
val = timer_read_4(sc, TIMER_IRQ_EN_REG);
|
|
val |= TIMER_IRQ_ENABLE(0);
|
|
timer_write_4(sc, TIMER_IRQ_EN_REG, val);
|
|
|
|
/* Set desired frequency in event timer and timecounter */
|
|
sc->et.et_frequency = sc->timer0_freq;
|
|
sc->et.et_name = "a10_timer Eventtimer";
|
|
sc->et.et_flags = ET_FLAGS_ONESHOT | ET_FLAGS_PERIODIC;
|
|
sc->et.et_quality = 1000;
|
|
sc->et.et_min_period = (0x00000005LLU << 32) / sc->et.et_frequency;
|
|
sc->et.et_max_period = (0xfffffffeLLU << 32) / sc->et.et_frequency;
|
|
sc->et.et_start = a10_timer_timer_start;
|
|
sc->et.et_stop = a10_timer_timer_stop;
|
|
sc->et.et_priv = sc;
|
|
et_register(&sc->et);
|
|
}
|
|
|
|
static int
|
|
a10_timer_timer_start(struct eventtimer *et, sbintime_t first,
|
|
sbintime_t period)
|
|
{
|
|
struct a10_timer_softc *sc;
|
|
uint32_t count;
|
|
uint32_t val;
|
|
|
|
sc = (struct a10_timer_softc *)et->et_priv;
|
|
|
|
if (period != 0)
|
|
sc->sc_period = ((uint32_t)et->et_frequency * period) >> 32;
|
|
else
|
|
sc->sc_period = 0;
|
|
if (first != 0)
|
|
count = ((uint32_t)et->et_frequency * first) >> 32;
|
|
else
|
|
count = sc->sc_period;
|
|
|
|
/* Update timer values */
|
|
timer_write_4(sc, TIMER_INTV_REG(0), sc->sc_period);
|
|
timer_write_4(sc, TIMER_CURV_REG(0), count);
|
|
|
|
val = timer_read_4(sc, TIMER_CTRL_REG(0));
|
|
if (period != 0) {
|
|
/* periodic */
|
|
val |= TIMER_CTRL_AUTORELOAD;
|
|
} else {
|
|
/* oneshot */
|
|
val &= ~TIMER_CTRL_AUTORELOAD;
|
|
}
|
|
/* Enable timer0 */
|
|
val |= TIMER_IRQ_ENABLE(0);
|
|
timer_write_4(sc, TIMER_CTRL_REG(0), val);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
a10_timer_timer_stop(struct eventtimer *et)
|
|
{
|
|
struct a10_timer_softc *sc;
|
|
uint32_t val;
|
|
|
|
sc = (struct a10_timer_softc *)et->et_priv;
|
|
|
|
/* Disable timer0 */
|
|
val = timer_read_4(sc, TIMER_CTRL_REG(0));
|
|
val &= ~TIMER_CTRL_START;
|
|
timer_write_4(sc, TIMER_CTRL_REG(0), val);
|
|
|
|
sc->sc_period = 0;
|
|
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Timecounter functions for A23 and above
|
|
*/
|
|
|
|
static void
|
|
a23_timer_timecounter_setup(struct a10_timer_softc *sc)
|
|
{
|
|
uint32_t val;
|
|
|
|
/* Set clock source to OSC24M, 1 pre-division, continuous mode */
|
|
val = timer_read_4(sc, TIMER_CTRL_REG(0));
|
|
val &= ~TIMER_CTRL_PRESCALAR_MASK | ~TIMER_CTRL_MODE_MASK | ~TIMER_CTRL_CLKSRC_MASK;
|
|
val |= TIMER_CTRL_PRESCALAR(1) | TIMER_CTRL_OSC24M;
|
|
timer_write_4(sc, TIMER_CTRL_REG(0), val);
|
|
|
|
/* Set reload value */
|
|
timer_write_4(sc, TIMER_INTV_REG(0), ~0);
|
|
val = timer_read_4(sc, TIMER_INTV_REG(0));
|
|
|
|
/* Enable timer0 */
|
|
val = timer_read_4(sc, TIMER_CTRL_REG(0));
|
|
val |= TIMER_CTRL_AUTORELOAD | TIMER_CTRL_START;
|
|
timer_write_4(sc, TIMER_CTRL_REG(0), val);
|
|
|
|
val = timer_read_4(sc, TIMER_CURV_REG(0));
|
|
|
|
a23_timer_timecounter.tc_priv = sc;
|
|
a23_timer_timecounter.tc_frequency = sc->timer0_freq;
|
|
tc_init(&a23_timer_timecounter);
|
|
}
|
|
|
|
static u_int
|
|
a23_timer_get_timecount(struct timecounter *tc)
|
|
{
|
|
struct a10_timer_softc *sc;
|
|
uint32_t val;
|
|
|
|
sc = (struct a10_timer_softc *)tc->tc_priv;
|
|
if (sc == NULL)
|
|
return (0);
|
|
|
|
val = timer_read_4(sc, TIMER_CURV_REG(0));
|
|
/* Counter count backwards */
|
|
return (~0u - val);
|
|
}
|
|
|
|
/*
|
|
* Timecounter functions for A10 and A13, using the 64 bits counter
|
|
*/
|
|
|
|
static uint64_t
|
|
timer_read_counter64(struct a10_timer_softc *sc)
|
|
{
|
|
uint32_t lo, hi;
|
|
|
|
/* Latch counter, wait for it to be ready to read. */
|
|
timer_write_4(sc, CNT64_CTRL_REG, CNT64_CTRL_RL_EN);
|
|
while (timer_read_4(sc, CNT64_CTRL_REG) & CNT64_CTRL_RL_EN)
|
|
continue;
|
|
|
|
hi = timer_read_4(sc, CNT64_HI_REG);
|
|
lo = timer_read_4(sc, CNT64_LO_REG);
|
|
|
|
return (((uint64_t)hi << 32) | lo);
|
|
}
|
|
|
|
#if defined(__arm__)
|
|
static void
|
|
a10_timer_delay(int usec, void *arg)
|
|
{
|
|
struct a10_timer_softc *sc = arg;
|
|
uint64_t end, now;
|
|
|
|
now = timer_read_counter64(sc);
|
|
end = now + (sc->timer0_freq / 1000000) * (usec + 1);
|
|
|
|
while (now < end)
|
|
now = timer_read_counter64(sc);
|
|
}
|
|
#endif
|
|
|
|
static u_int
|
|
a10_timer_get_timecount(struct timecounter *tc)
|
|
{
|
|
|
|
if (tc->tc_priv == NULL)
|
|
return (0);
|
|
|
|
return ((u_int)timer_read_counter64(tc->tc_priv));
|
|
}
|
|
|
|
static device_method_t a10_timer_methods[] = {
|
|
DEVMETHOD(device_probe, a10_timer_probe),
|
|
DEVMETHOD(device_attach, a10_timer_attach),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t a10_timer_driver = {
|
|
"a10_timer",
|
|
a10_timer_methods,
|
|
sizeof(struct a10_timer_softc),
|
|
};
|
|
|
|
static devclass_t a10_timer_devclass;
|
|
|
|
EARLY_DRIVER_MODULE(a10_timer, simplebus, a10_timer_driver, a10_timer_devclass, 0, 0,
|
|
BUS_PASS_TIMER + BUS_PASS_ORDER_MIDDLE);
|