3e42392551
Introduce /etc/rc.d/bluetooth script to start/stop Bluetooth devices. It will be called from devd(8) in response to device arrival/departure events. It is also possible to call it by hand to start/stop particular device without unplugging it. Introduce generic way to set configuration parameters for Bluetooth devices. By default /etc/rc.d/bluetooth script has hardwired defaults compatible with old rc.bluetooth from /usr/share/netgraph/bluetooth/examples. These can be overridden using /etc/defaults/bluetooth.device.conf file (system wide defaults). Finally, there could be another device specific override file located in /etc/bluetooth/$device.conf (where $device is ubt0, btccc0 etc.) The list of configuration parameters and their meaning described in the /etc/defaults/bluetooth.device.conf file. Even though Bluetooth device configuration files are not shell scripts, they must follow basic sh(1) syntax. The bluetooth.device.conf(5) and handbook update will follow shortly. Inspired by: Panagiotis Astithas ( past at ebs dot gr ) Reviewed by: brooks, yar MFC after: 1 week
113 lines
3.8 KiB
Plaintext
113 lines
3.8 KiB
Plaintext
# Copyright (c) 2005 Maksim Yevmenkin <m_evmenkin@yahoo.com>
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
# SUCH DAMAGE.
|
|
#
|
|
# $FreeBSD$
|
|
|
|
# The authentication_enable parameter controls if the device requires to
|
|
# authenticate the remote device at connection setup. At connection setup,
|
|
# only the devices with the authentication_enable parameter enabled will
|
|
# try to authenticate the other device.
|
|
#
|
|
# Possible values:
|
|
#
|
|
# NO or 0 authentication disabled (default);
|
|
# YES or 1 authentication enabled.
|
|
|
|
# authentication_enable="NO"
|
|
|
|
# The class parameter is used to indicate the capabilities of the device to
|
|
# other devices.
|
|
#
|
|
# For more details see
|
|
# https://www.bluetooth.org/foundry/assignnumb/document/baseband
|
|
#
|
|
# Possible value:
|
|
#
|
|
# xx:xx:xx where xx is a hex number
|
|
|
|
# class="ff:01:0c"
|
|
|
|
# The connectable parameter controls whether or not the device should
|
|
# periodically scan for page attempts from other devices.
|
|
#
|
|
# Possible values:
|
|
#
|
|
# NO or 0 do not scan for page attempts;
|
|
# YES or 1 scan for page attempts (default).
|
|
|
|
# connectable="YES"
|
|
|
|
# The discoverable parameter controls whether or not the device should
|
|
# periodically scan for inquiry requests from other devices.
|
|
#
|
|
# Possible values:
|
|
#
|
|
# NO or 0 do not scan for inquiry requests;
|
|
# YES or 1 scan for inquiry requests (default).
|
|
|
|
# discoverable="YES"
|
|
|
|
# The encryption_mode parameter controls if the device requires encryption
|
|
# to the remote device at connection setup. At connection setup, only the
|
|
# devices with the authentication_enable parameter enabled and encryption_mode
|
|
# parameter enabled will try to encrypt the connection to the other device.
|
|
#
|
|
# Possible values:
|
|
#
|
|
# NONE or 0 encryption disabled (default);
|
|
# P2P or 1 encryption only for point-to-point packets;
|
|
# ALL or 2 encryption for both point-to-point and broadcast packets.
|
|
|
|
# encryption_mode="NONE"
|
|
|
|
# HCI node debug level. Higher values mean more verbose output.
|
|
#
|
|
# Possible values: 0 - 4
|
|
|
|
# hci_debug_level="3"
|
|
|
|
# L2CAP node debug level. Higher values mean more verbose output.
|
|
#
|
|
# Possible values: 0 - 4
|
|
|
|
# l2cap_debug_level="3"
|
|
|
|
# The local_name parameter provides the ability to modify the user friendly
|
|
# name for the device.
|
|
|
|
# local_name="My device"
|
|
|
|
# The role_switch parameter controls whether the local device should perform
|
|
# role switch. By default, if role switch is supported, the local device will
|
|
# try to perform role switch and become Master on incoming connection. Some
|
|
# devices do not support role switch and thus incomming connections from such
|
|
# devices will fail. If role switch is disabled then accepting device will
|
|
# remain Slave.
|
|
#
|
|
# NO or 0 do not perform role switch;
|
|
# YES or 1 perform role switch (default).
|
|
|
|
# role_switch="YES"
|
|
|