d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e2314c6ccb
freebsd-skq/sys/arm/conf
History
Alexander Motin 97b53e3634 Switch the GENERIC kernels for all architectures to the new CAM-based ATA 
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
..
.cvsignore
AVILA Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
AVILA.hints Hook up the five gpio pins on the Avila board to the gpio framework. There are 2010-11-07 20:33:39 +00:00
BWCT Update the commented out option for omitting the sysctl descriptions; it 2010-02-24 19:28:15 +00:00
BWCT.hints add hint for at45d flash device sitting of spibus0 2010-11-11 15:02:14 +00:00
CAMBRIA Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
CAMBRIA.hints Add a GPIO driver for the Gateworks Cambria platform. 2010-11-11 20:18:33 +00:00
CNS11XXNAS Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
CRB Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
DB-78XXX Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
DB-88F5XXX Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
DB-88F6XXX Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
DEFAULTS Revert 200594. This file isn't intended for these sorts of things. 2010-01-04 21:30:04 +00:00
DOCKSTAR Add custom kernel configuration and device tree source files for 2010-09-08 19:50:47 +00:00
EP80219 Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
GUMSTIX Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
GUMSTIX.hints Support for the XScale PXA255 SoC as found on the Gumstix Basix and Connex 2008-06-06 05:08:09 +00:00
HL200 Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
HL201 Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
HL201.hints Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201. 2010-07-14 00:48:53 +00:00
IQ31244 Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00
KB920X Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
KB920X.hints
LN2410SBC Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
NSLU Adjust style (following the already existing rules) for the newly 2010-02-15 23:44:48 +00:00
NSLU.hints Use the good hints for the NSLU, it should fix the network adapter. 2009-05-06 20:24:17 +00:00
QILA9G20 Add the QILA9G20 config files. 2010-10-06 22:41:32 +00:00
QILA9G20.hints Add the QILA9G20 config files. 2010-10-06 22:41:32 +00:00
SAM9G20EK Add the AT91SAM9G20EK config files. 2010-10-06 22:32:31 +00:00
SAM9G20EK.hints Add the AT91SAM9G20EK config files. 2010-10-06 22:32:31 +00:00
SHEEVAPLUG Convert Marvell ARM platforms to FDT convention. 2010-06-13 13:28:53 +00:00
SIMICS Add the options DEADLKRES (introducing the deadlock resolver thread) in 2010-02-10 16:30:04 +00:00
TS7800 Switch the GENERIC kernels for all architectures to the new CAM-based ATA 2011-04-24 08:58:58 +00:00