freebsd-skq/sys/dev/acpica/acpi_pci.c
rstone e40d09375f Implement interface to create SR-IOV Virtual Functions
Implement the interace to create SR-IOV Virtual Functions (VFs).
When a driver registers that they support SR-IOV by calling
pci_setup_iov(), the SR-IOV code creates a new node in /dev/iov
for that device.  An ioctl can be invoked on that device to
create VFs and have the driver initialize them.

At this point, allocating memory I/O windows (BARs) is not
supported.

Differential Revision:	https://reviews.freebsd.org/D76
Reviewed by:		jhb
MFC after: 		1 month
Sponsored by:		Sandvine Inc.
2015-03-01 00:40:09 +00:00

376 lines
11 KiB
C

/*-
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000, BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <dev/acpica/acpivar.h>
#include <sys/pciio.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pci_private.h>
#include "pcib_if.h"
#include "pci_if.h"
/* Hooks for the ACPI CA debugging infrastructure. */
#define _COMPONENT ACPI_BUS
ACPI_MODULE_NAME("PCI")
struct acpi_pci_devinfo {
struct pci_devinfo ap_dinfo;
ACPI_HANDLE ap_handle;
int ap_flags;
};
ACPI_SERIAL_DECL(pci_powerstate, "ACPI PCI power methods");
/* Be sure that ACPI and PCI power states are equivalent. */
CTASSERT(ACPI_STATE_D0 == PCI_POWERSTATE_D0);
CTASSERT(ACPI_STATE_D1 == PCI_POWERSTATE_D1);
CTASSERT(ACPI_STATE_D2 == PCI_POWERSTATE_D2);
CTASSERT(ACPI_STATE_D3 == PCI_POWERSTATE_D3);
static int acpi_pci_attach(device_t dev);
static int acpi_pci_child_location_str_method(device_t cbdev,
device_t child, char *buf, size_t buflen);
static int acpi_pci_probe(device_t dev);
static int acpi_pci_read_ivar(device_t dev, device_t child, int which,
uintptr_t *result);
static int acpi_pci_write_ivar(device_t dev, device_t child, int which,
uintptr_t value);
static ACPI_STATUS acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level,
void *context, void **status);
static int acpi_pci_set_powerstate_method(device_t dev, device_t child,
int state);
static void acpi_pci_update_device(ACPI_HANDLE handle, device_t pci_child);
static bus_dma_tag_t acpi_pci_get_dma_tag(device_t bus, device_t child);
#ifdef PCI_IOV
static device_t acpi_pci_create_iov_child(device_t bus, device_t pf,
uint16_t rid, uint16_t vid, uint16_t did);
#endif
static device_method_t acpi_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, acpi_pci_probe),
DEVMETHOD(device_attach, acpi_pci_attach),
/* Bus interface */
DEVMETHOD(bus_read_ivar, acpi_pci_read_ivar),
DEVMETHOD(bus_write_ivar, acpi_pci_write_ivar),
DEVMETHOD(bus_child_location_str, acpi_pci_child_location_str_method),
DEVMETHOD(bus_get_dma_tag, acpi_pci_get_dma_tag),
DEVMETHOD(bus_get_domain, acpi_get_domain),
/* PCI interface */
DEVMETHOD(pci_set_powerstate, acpi_pci_set_powerstate_method),
#ifdef PCI_IOV
DEVMETHOD(pci_create_iov_child, acpi_pci_create_iov_child),
#endif
DEVMETHOD_END
};
static devclass_t pci_devclass;
DEFINE_CLASS_1(pci, acpi_pci_driver, acpi_pci_methods, sizeof(struct pci_softc),
pci_driver);
DRIVER_MODULE(acpi_pci, pcib, acpi_pci_driver, pci_devclass, 0, 0);
MODULE_DEPEND(acpi_pci, acpi, 1, 1, 1);
MODULE_DEPEND(acpi_pci, pci, 1, 1, 1);
MODULE_VERSION(acpi_pci, 1);
static int
acpi_pci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct acpi_pci_devinfo *dinfo;
dinfo = device_get_ivars(child);
switch (which) {
case ACPI_IVAR_HANDLE:
*result = (uintptr_t)dinfo->ap_handle;
return (0);
case ACPI_IVAR_FLAGS:
*result = (uintptr_t)dinfo->ap_flags;
return (0);
}
return (pci_read_ivar(dev, child, which, result));
}
static int
acpi_pci_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
struct acpi_pci_devinfo *dinfo;
dinfo = device_get_ivars(child);
switch (which) {
case ACPI_IVAR_HANDLE:
dinfo->ap_handle = (ACPI_HANDLE)value;
return (0);
case ACPI_IVAR_FLAGS:
dinfo->ap_flags = (int)value;
return (0);
}
return (pci_write_ivar(dev, child, which, value));
}
static int
acpi_pci_child_location_str_method(device_t cbdev, device_t child, char *buf,
size_t buflen)
{
struct acpi_pci_devinfo *dinfo = device_get_ivars(child);
int pxm;
char buf2[32];
pci_child_location_str_method(cbdev, child, buf, buflen);
if (dinfo->ap_handle) {
strlcat(buf, " handle=", buflen);
strlcat(buf, acpi_name(dinfo->ap_handle), buflen);
if (ACPI_SUCCESS(acpi_GetInteger(dinfo->ap_handle, "_PXM", &pxm))) {
snprintf(buf2, 32, " _PXM=%d", pxm);
strlcat(buf, buf2, buflen);
}
}
return (0);
}
/*
* PCI power manangement
*/
static int
acpi_pci_set_powerstate_method(device_t dev, device_t child, int state)
{
ACPI_HANDLE h;
ACPI_STATUS status;
int old_state, error;
error = 0;
if (state < ACPI_STATE_D0 || state > ACPI_STATE_D3)
return (EINVAL);
/*
* We set the state using PCI Power Management outside of setting
* the ACPI state. This means that when powering down a device, we
* first shut it down using PCI, and then using ACPI, which lets ACPI
* try to power down any Power Resources that are now no longer used.
* When powering up a device, we let ACPI set the state first so that
* it can enable any needed Power Resources before changing the PCI
* power state.
*/
ACPI_SERIAL_BEGIN(pci_powerstate);
old_state = pci_get_powerstate(child);
if (old_state < state && pci_do_power_suspend) {
error = pci_set_powerstate_method(dev, child, state);
if (error)
goto out;
}
h = acpi_get_handle(child);
status = acpi_pwr_switch_consumer(h, state);
if (ACPI_SUCCESS(status)) {
if (bootverbose)
device_printf(dev, "set ACPI power state D%d on %s\n",
state, acpi_name(h));
} else if (status != AE_NOT_FOUND)
device_printf(dev,
"failed to set ACPI power state D%d on %s: %s\n",
state, acpi_name(h), AcpiFormatException(status));
if (old_state > state && pci_do_power_resume)
error = pci_set_powerstate_method(dev, child, state);
out:
ACPI_SERIAL_END(pci_powerstate);
return (error);
}
static void
acpi_pci_update_device(ACPI_HANDLE handle, device_t pci_child)
{
ACPI_STATUS status;
device_t child;
/*
* Occasionally a PCI device may show up as an ACPI device
* with a _HID. (For example, the TabletPC TC1000 has a
* second PCI-ISA bridge that has a _HID for an
* acpi_sysresource device.) In that case, leave ACPI-CA's
* device data pointing at the ACPI-enumerated device.
*/
child = acpi_get_device(handle);
if (child != NULL) {
KASSERT(device_get_parent(child) ==
devclass_get_device(devclass_find("acpi"), 0),
("%s: child (%s)'s parent is not acpi0", __func__,
acpi_name(handle)));
return;
}
/*
* Update ACPI-CA to use the PCI enumerated device_t for this handle.
*/
status = AcpiAttachData(handle, acpi_fake_objhandler, pci_child);
if (ACPI_FAILURE(status))
printf("WARNING: Unable to attach object data to %s - %s\n",
acpi_name(handle), AcpiFormatException(status));
}
static ACPI_STATUS
acpi_pci_save_handle(ACPI_HANDLE handle, UINT32 level, void *context,
void **status)
{
struct acpi_pci_devinfo *dinfo;
device_t *devlist;
int devcount, i, func, slot;
UINT32 address;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
if (ACPI_FAILURE(acpi_GetInteger(handle, "_ADR", &address)))
return_ACPI_STATUS (AE_OK);
slot = ACPI_ADR_PCI_SLOT(address);
func = ACPI_ADR_PCI_FUNC(address);
if (device_get_children((device_t)context, &devlist, &devcount) != 0)
return_ACPI_STATUS (AE_OK);
for (i = 0; i < devcount; i++) {
dinfo = device_get_ivars(devlist[i]);
if (dinfo->ap_dinfo.cfg.func == func &&
dinfo->ap_dinfo.cfg.slot == slot) {
dinfo->ap_handle = handle;
acpi_pci_update_device(handle, devlist[i]);
break;
}
}
free(devlist, M_TEMP);
return_ACPI_STATUS (AE_OK);
}
static int
acpi_pci_probe(device_t dev)
{
if (acpi_get_handle(dev) == NULL)
return (ENXIO);
device_set_desc(dev, "ACPI PCI bus");
return (BUS_PROBE_DEFAULT);
}
static int
acpi_pci_attach(device_t dev)
{
int busno, domain, error;
error = pci_attach_common(dev);
if (error)
return (error);
/*
* Since there can be multiple independantly numbered PCI
* busses on systems with multiple PCI domains, we can't use
* the unit number to decide which bus we are probing. We ask
* the parent pcib what our domain and bus numbers are.
*/
domain = pcib_get_domain(dev);
busno = pcib_get_bus(dev);
/*
* First, PCI devices are added as in the normal PCI bus driver.
* Afterwards, the ACPI namespace under the bridge driver is
* walked to save ACPI handles to all the devices that appear in
* the ACPI namespace as immediate descendants of the bridge.
*
* XXX: Sometimes PCI devices show up in the ACPI namespace that
* pci_add_children() doesn't find. We currently just ignore
* these devices.
*/
pci_add_children(dev, domain, busno, sizeof(struct acpi_pci_devinfo));
AcpiWalkNamespace(ACPI_TYPE_DEVICE, acpi_get_handle(dev), 1,
acpi_pci_save_handle, NULL, dev, NULL);
return (bus_generic_attach(dev));
}
#ifdef ACPI_DMAR
bus_dma_tag_t dmar_get_dma_tag(device_t dev, device_t child);
static bus_dma_tag_t
acpi_pci_get_dma_tag(device_t bus, device_t child)
{
bus_dma_tag_t tag;
if (device_get_parent(child) == bus) {
/* try dmar and return if it works */
tag = dmar_get_dma_tag(bus, child);
} else
tag = NULL;
if (tag == NULL)
tag = pci_get_dma_tag(bus, child);
return (tag);
}
#else
static bus_dma_tag_t
acpi_pci_get_dma_tag(device_t bus, device_t child)
{
return (pci_get_dma_tag(bus, child));
}
#endif
#ifdef PCI_IOV
static device_t
acpi_pci_create_iov_child(device_t bus, device_t pf, uint16_t rid, uint16_t vid,
uint16_t did)
{
struct acpi_pci_devinfo *dinfo;
device_t vf;
vf = pci_add_iov_child(bus, pf, sizeof(struct acpi_pci_devinfo), rid,
vid, did);
if (vf == NULL)
return (NULL);
dinfo = device_get_ivars(vf);
dinfo->ap_handle = NULL;
return (vf);
}
#endif