24b66433f6
- Rename rt2560_read_eeprom to rt2560_read_config, we already have rt2560_eeprom_read - If hardware gives us wrong encryption done index, shout out loudly and terminate the processing loop - Process encryption done if RX done bit is set in interrupt status register (according to Ralink Linux driver) - Turn VALID/BUSY bits in TX descriptor only after TX descriptor is fully setup - Fix BBP read: RT2560_BBPCSR can't be written until its RT2560_BBP_BUSY bit is off (according to Ralink Linux driver) - Skip invalid (0 of 0xffff) BBP register/value entries stored in EEPROM - Fix channel TX power location in EEPROM, if channel TX power is above 31 set it to 24 (TX power only has 5bits in RF register, "24" is according to Ralink Linux driver) - Configure BBP according to the BBP register/value stored in EEPROM, restore BBP17 (RX sensitivity tuning) to default value after this. - Set TX/RX antenna after BBP is initialized; these two operation will try to set BBP registers - Reconfigure ACK TX time registers according to 802.11g standard (TX @36Mb, other side's ACK should be sent @24Mb). - 2560 parts have two TX ring: one for management/control packets, one for data packets. Add private OACTIVE flag for each of them. Turn on IFF_DRV_OACTIVE if one of private OACTIVE is on; turn off IFF_DRV_OACTIVE iff all of them are off. - Rework watchdog to mimic old if_watchdog action. Process TX done/encryption done in watchdog function (according to Ralink Linux driver) Obtained from: DragonFly Approved by: sam (mentor) Tested by: sam Related to PR: kern/117655 # Forcing long slot time setting is not included in this commit, comment and # related code is in place, so if problem pops up, quick tests could be done.
178 lines
4.1 KiB
C
178 lines
4.1 KiB
C
/* $FreeBSD$ */
|
|
|
|
/*-
|
|
* Copyright (c) 2005, 2006
|
|
* Damien Bergamini <damien.bergamini@free.fr>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
struct rt2560_rx_radiotap_header {
|
|
struct ieee80211_radiotap_header wr_ihdr;
|
|
uint64_t wr_tsf;
|
|
uint8_t wr_flags;
|
|
uint8_t wr_rate;
|
|
uint16_t wr_chan_freq;
|
|
uint16_t wr_chan_flags;
|
|
uint8_t wr_antenna;
|
|
uint8_t wr_antsignal;
|
|
};
|
|
|
|
#define RT2560_RX_RADIOTAP_PRESENT \
|
|
((1 << IEEE80211_RADIOTAP_TSFT) | \
|
|
(1 << IEEE80211_RADIOTAP_FLAGS) | \
|
|
(1 << IEEE80211_RADIOTAP_RATE) | \
|
|
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
|
|
(1 << IEEE80211_RADIOTAP_ANTENNA) | \
|
|
(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL))
|
|
|
|
struct rt2560_tx_radiotap_header {
|
|
struct ieee80211_radiotap_header wt_ihdr;
|
|
uint8_t wt_flags;
|
|
uint8_t wt_rate;
|
|
uint16_t wt_chan_freq;
|
|
uint16_t wt_chan_flags;
|
|
uint8_t wt_antenna;
|
|
};
|
|
|
|
#define RT2560_TX_RADIOTAP_PRESENT \
|
|
((1 << IEEE80211_RADIOTAP_FLAGS) | \
|
|
(1 << IEEE80211_RADIOTAP_RATE) | \
|
|
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
|
|
(1 << IEEE80211_RADIOTAP_ANTENNA))
|
|
|
|
struct rt2560_tx_data {
|
|
bus_dmamap_t map;
|
|
struct mbuf *m;
|
|
struct ieee80211_node *ni;
|
|
struct ral_rssdesc id;
|
|
};
|
|
|
|
struct rt2560_tx_ring {
|
|
bus_dma_tag_t desc_dmat;
|
|
bus_dma_tag_t data_dmat;
|
|
bus_dmamap_t desc_map;
|
|
bus_addr_t physaddr;
|
|
struct rt2560_tx_desc *desc;
|
|
struct rt2560_tx_data *data;
|
|
int count;
|
|
int queued;
|
|
int cur;
|
|
int next;
|
|
int cur_encrypt;
|
|
int next_encrypt;
|
|
};
|
|
|
|
struct rt2560_rx_data {
|
|
bus_dmamap_t map;
|
|
struct mbuf *m;
|
|
int drop;
|
|
};
|
|
|
|
struct rt2560_rx_ring {
|
|
bus_dma_tag_t desc_dmat;
|
|
bus_dma_tag_t data_dmat;
|
|
bus_dmamap_t desc_map;
|
|
bus_addr_t physaddr;
|
|
struct rt2560_rx_desc *desc;
|
|
struct rt2560_rx_data *data;
|
|
int count;
|
|
int cur;
|
|
int next;
|
|
int cur_decrypt;
|
|
};
|
|
|
|
struct rt2560_node {
|
|
struct ieee80211_node ni;
|
|
struct ral_rssadapt rssadapt;
|
|
};
|
|
|
|
struct rt2560_softc {
|
|
struct ifnet *sc_ifp;
|
|
struct ieee80211com sc_ic;
|
|
int (*sc_newstate)(struct ieee80211com *,
|
|
enum ieee80211_state, int);
|
|
device_t sc_dev;
|
|
bus_space_tag_t sc_st;
|
|
bus_space_handle_t sc_sh;
|
|
|
|
struct mtx sc_mtx;
|
|
|
|
struct callout watchdog_ch;
|
|
struct callout rssadapt_ch;
|
|
|
|
int sc_tx_timer;
|
|
int sc_invalid;
|
|
/*
|
|
* The same in both up to here
|
|
* ------------------------------------------------
|
|
*/
|
|
uint32_t asic_rev;
|
|
uint32_t eeprom_rev;
|
|
uint8_t rf_rev;
|
|
uint8_t rssi_corr;
|
|
|
|
struct rt2560_tx_ring txq;
|
|
struct rt2560_tx_ring prioq;
|
|
struct rt2560_tx_ring atimq;
|
|
struct rt2560_tx_ring bcnq;
|
|
struct rt2560_rx_ring rxq;
|
|
|
|
struct ieee80211_beacon_offsets sc_bo;
|
|
|
|
uint32_t rf_regs[4];
|
|
uint8_t txpow[14];
|
|
|
|
struct {
|
|
uint8_t reg;
|
|
uint8_t val;
|
|
} bbp_prom[16];
|
|
|
|
int led_mode;
|
|
int hw_radio;
|
|
int rx_ant;
|
|
int tx_ant;
|
|
int nb_ant;
|
|
|
|
int dwelltime;
|
|
|
|
struct bpf_if *sc_drvbpf;
|
|
|
|
union {
|
|
struct rt2560_rx_radiotap_header th;
|
|
uint8_t pad[64];
|
|
} sc_rxtapu;
|
|
#define sc_rxtap sc_rxtapu.th
|
|
int sc_rxtap_len;
|
|
|
|
union {
|
|
struct rt2560_tx_radiotap_header th;
|
|
uint8_t pad[64];
|
|
} sc_txtapu;
|
|
#define sc_txtap sc_txtapu.th
|
|
int sc_txtap_len;
|
|
#define RT2560_F_INPUT_RUNNING 0x1
|
|
#define RT2560_F_PRIO_OACTIVE 0x2
|
|
#define RT2560_F_DATA_OACTIVE 0x4
|
|
int sc_flags;
|
|
};
|
|
|
|
int rt2560_attach(device_t, int);
|
|
int rt2560_detach(void *);
|
|
void rt2560_stop(void *);
|
|
void rt2560_resume(void *);
|
|
void rt2560_intr(void *);
|
|
|
|
#define RAL_LOCK(sc) mtx_lock(&(sc)->sc_mtx)
|
|
#define RAL_UNLOCK(sc) mtx_unlock(&(sc)->sc_mtx)
|