fc74a9f93a
struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
159 lines
5.2 KiB
C
159 lines
5.2 KiB
C
/*-
|
|
* Copyright (c) 1997, 1998, 1999, 2000-2003
|
|
* Bill Paul <wpaul@windriver.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Definitions for the ASIX Electronics AX88172 to ethernet controller.
|
|
*/
|
|
|
|
|
|
/*
|
|
* Vendor specific commands
|
|
* ASIX conveniently doesn't document the 'set NODEID' command in their
|
|
* datasheet (thanks a lot guys).
|
|
* To make handling these commands easier, I added some extra data
|
|
* which is decided by the axe_cmd() routine. Commands are encoded
|
|
* in 16 bites, with the format: LDCC. L and D are both nibbles in
|
|
* the high byte. L represents the data length (0 to 15) and D
|
|
* represents the direction (0 for vendor read, 1 for vendor write).
|
|
* CC is the command byte, as specified in the manual.
|
|
*/
|
|
|
|
#define AXE_CMD_DIR(x) (((x) & 0x0F00) >> 8)
|
|
#define AXE_CMD_LEN(x) (((x) & 0xF000) >> 12)
|
|
#define AXE_CMD_CMD(x) ((x) & 0x00FF)
|
|
|
|
#define AXE_CMD_READ_RXTX_SRAM 0x2002
|
|
#define AXE_CMD_WRITE_RX_SRAM 0x0103
|
|
#define AXE_CMD_WRITE_TX_SRAM 0x0104
|
|
#define AXE_CMD_MII_OPMODE_SW 0x0106
|
|
#define AXE_CMD_MII_READ_REG 0x2007
|
|
#define AXE_CMD_MII_WRITE_REG 0x2108
|
|
#define AXE_CMD_MII_READ_OPMODE 0x1009
|
|
#define AXE_CMD_MII_OPMODE_HW 0x010A
|
|
#define AXE_CMD_SROM_READ 0x200B
|
|
#define AXE_CMD_SROM_WRITE 0x010C
|
|
#define AXE_CMD_SROM_WR_ENABLE 0x010D
|
|
#define AXE_CMD_SROM_WR_DISABLE 0x010E
|
|
#define AXE_CMD_RXCTL_READ 0x200F
|
|
#define AXE_CMD_RXCTL_WRITE 0x0110
|
|
#define AXE_CMD_READ_IPG012 0x3011
|
|
#define AXE_CMD_WRITE_IPG0 0x0112
|
|
#define AXE_CMD_WRITE_IPG1 0x0113
|
|
#define AXE_CMD_WRITE_IPG2 0x0114
|
|
#define AXE_CMD_READ_MCAST 0x8015
|
|
#define AXE_CMD_WRITE_MCAST 0x8116
|
|
#define AXE_CMD_READ_NODEID 0x6017
|
|
#define AXE_CMD_WRITE_NODEID 0x6118
|
|
#define AXE_CMD_READ_PHYID 0x2019
|
|
#define AXE_CMD_READ_MEDIA 0x101A
|
|
#define AXE_CMD_WRITE_MEDIA 0x011B
|
|
#define AXE_CMD_READ_MONITOR_MODE 0x101C
|
|
#define AXE_CMD_WRITE_MONITOR_MODE 0x011D
|
|
#define AXE_CMD_READ_GPIO 0x101E
|
|
#define AXE_CMD_WRITE_GPIO 0x011F
|
|
|
|
#define AXE_RXCMD_PROMISC 0x0001
|
|
#define AXE_RXCMD_ALLMULTI 0x0002
|
|
#define AXE_RXCMD_UNICAST 0x0004
|
|
#define AXE_RXCMD_BROADCAST 0x0008
|
|
#define AXE_RXCMD_MULTICAST 0x0010
|
|
#define AXE_RXCMD_ENABLE 0x0080
|
|
|
|
#define AXE_NOPHY 0xE0
|
|
|
|
#define AXE_TIMEOUT 1000
|
|
#define AXE_MIN_FRAMELEN 60
|
|
#define AXE_RX_FRAMES 1
|
|
#define AXE_TX_FRAMES 1
|
|
|
|
#define AXE_CTL_READ 0x01
|
|
#define AXE_CTL_WRITE 0x02
|
|
|
|
#define AXE_CONFIG_NO 1
|
|
#define AXE_IFACE_IDX 0
|
|
|
|
/*
|
|
* The interrupt endpoint is currently unused
|
|
* by the ASIX part.
|
|
*/
|
|
#define AXE_ENDPT_RX 0x0
|
|
#define AXE_ENDPT_TX 0x1
|
|
#define AXE_ENDPT_INTR 0x2
|
|
#define AXE_ENDPT_MAX 0x3
|
|
|
|
struct axe_type {
|
|
u_int16_t axe_vid;
|
|
u_int16_t axe_did;
|
|
};
|
|
|
|
#define AXE_INC(x, y) (x) = (x + 1) % y
|
|
|
|
struct axe_softc {
|
|
#if defined(__FreeBSD__)
|
|
#define GET_MII(sc) (device_get_softc((sc)->axe_miibus))
|
|
#elif defined(__NetBSD__)
|
|
#define GET_MII(sc) (&(sc)->axe_mii)
|
|
#elif defined(__OpenBSD__)
|
|
#define GET_MII(sc) (&(sc)->axe_mii)
|
|
#endif
|
|
struct ifnet *axe_ifp;
|
|
device_t axe_miibus;
|
|
device_t axe_dev;
|
|
usbd_device_handle axe_udev;
|
|
usbd_interface_handle axe_iface;
|
|
int axe_ed[AXE_ENDPT_MAX];
|
|
usbd_pipe_handle axe_ep[AXE_ENDPT_MAX];
|
|
int axe_unit;
|
|
int axe_if_flags;
|
|
struct ue_cdata axe_cdata;
|
|
struct callout_handle axe_stat_ch;
|
|
#if __FreeBSD_version >= 500000
|
|
struct mtx axe_mtx;
|
|
#endif
|
|
char axe_dying;
|
|
int axe_link;
|
|
unsigned char axe_ipgs[3];
|
|
unsigned char axe_phyaddrs[2];
|
|
struct timeval axe_rx_notice;
|
|
struct usb_qdat axe_qdat;
|
|
};
|
|
|
|
#if 0
|
|
#define AXE_LOCK(_sc) mtx_lock(&(_sc)->axe_mtx)
|
|
#define AXE_UNLOCK(_sc) mtx_unlock(&(_sc)->axe_mtx)
|
|
#else
|
|
#define AXE_LOCK(_sc)
|
|
#define AXE_UNLOCK(_sc)
|
|
#endif
|