freebsd-skq/lib/libc/sys/socket.2
2001-07-15 07:53:42 +00:00

305 lines
8.8 KiB
Groff

.\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the University of
.\" California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" From: @(#)socket.2 8.1 (Berkeley) 6/4/93
.\" $FreeBSD$
.\"
.Dd November 24, 1997
.Dt SOCKET 2
.Os
.Sh NAME
.Nm socket
.Nd create an endpoint for communication
.Sh LIBRARY
.Lb libc
.Sh SYNOPSIS
.Fd #include <sys/types.h>
.Fd #include <sys/socket.h>
.Ft int
.Fn socket "int domain" "int type" "int protocol"
.Sh DESCRIPTION
.Fn Socket
creates an endpoint for communication and returns a descriptor.
.Pp
The
.Fa domain
parameter specifies a communications domain within which
communication will take place; this selects the protocol family
which should be used.
These families are defined in the include file
.Ao Pa sys/socket.h Ac .
The currently understood formats are:
.Pp
.Bd -literal -offset indent -compact
PF_LOCAL Host-internal protocols, formerly called PF_UNIX,
PF_UNIX Host-internal protocols, depreciated, use PF_LOCAL,
PF_INET Internet version 4 protocols,
PF_IMPLINK ARPAnet IMP addresses,
PF_PUP PUP protocols, like BSP,
PF_CHAOS MIT CHAOS protocols,
PF_NS Xerox Network Systems protocols,
PF_ISO ISO protocols,
PF_OSI Open Systems Interconnection protocols,
PF_ECMA European Computer Manufacturers,
PF_DATAKIT Datakit protocols,
PF_CCITT ITU-T protocols, like X.25,
PF_SNA IBM SNA,
PF_DECnet DECnet,
PF_DLI DEC Direct Data Link Interface protocol,
PF_LAT LAT protocol,
PF_HYLINK NSC Hyperchannel,
PF_APPLETALK AppleTalk protocols,
PF_ROUTE Internal Routing protocol,
PF_LINK Link layer interface,
PF_XTP eXpress Transfer Protocol,
PF_COIP Connection-Oriented IP, aka ST II,
PF_CNT Computer Network Technology,
PF_SIP Simple Internet Protocol,
PF_IPX Novell Intenet Packet eXchange protocol,
PF_RTIP Help Identify RTIP packets,
PF_PIP Help Identify PIP packets,
PF_ISDN Integrated Services Digital Network,
PF_KEY Internal key-management function,
PF_INET6 Internet version 6 protocols,
PF_NATM Native ATM access,
PF_ATM ATM,
PF_NETGRAPH Netgraph sockets
.Ed
.Pp
The socket has the indicated
.Fa type ,
which specifies the semantics of communication. Currently
defined types are:
.Pp
.Bd -literal -offset indent -compact
SOCK_STREAM Stream socket,
SOCK_DGRAM Datagram socket,
SOCK_RAW Raw-protocol interface,
SOCK_RDM Reliably-delivered packet,
SOCK_SEQPACKET Sequenced packet stream
.Ed
.Pp
A
.Dv SOCK_STREAM
type provides sequenced, reliable,
two-way connection based byte streams.
An out-of-band data transmission mechanism may be supported.
A
.Dv SOCK_DGRAM
socket supports
datagrams (connectionless, unreliable messages of
a fixed (typically small) maximum length).
A
.Dv SOCK_SEQPACKET
socket may provide a sequenced, reliable,
two-way connection-based data transmission path for datagrams
of fixed maximum length; a consumer may be required to read
an entire packet with each read system call.
This facility is protocol specific, and presently implemented
only for
.Dv PF_NS .
.Dv SOCK_RAW
sockets provide access to internal network protocols and interfaces.
The types
.Dv SOCK_RAW ,
which is available only to the super-user, and
.Dv SOCK_RDM ,
which is planned,
but not yet implemented, are not described here.
.Pp
The
.Fa protocol
specifies a particular protocol to be used with the socket.
Normally only a single protocol exists to support a particular
socket type within a given protocol family. However, it is possible
that many protocols may exist, in which case a particular protocol
must be specified in this manner. The protocol number to use is
particular to the
.Dq "communication domain"
in which communication
is to take place; see
.Xr protocols 5 .
.Pp
Sockets of type
.Dv SOCK_STREAM
are full-duplex byte streams, similar
to pipes. A stream socket must be in a
.Em connected
state before any data may be sent or received
on it. A connection to another socket is created with a
.Xr connect 2
call.
Once connected, data may be transferred using
.Xr read 2
and
.Xr write 2
calls or some variant of the
.Xr send 2
and
.Xr recv 2
calls.
(Some protocol families, such as the Internet family,
support the notion of an
.Dq implied connect ,
which permits data to be sent piggybacked onto a connect operation by
using the
.Xr sendto 2
call.)
When a session has been completed a
.Xr close 2
may be performed.
Out-of-band data may also be transmitted as described in
.Xr send 2
and received as described in
.Xr recv 2 .
.Pp
The communications protocols used to implement a
.Dv SOCK_STREAM
insure that data
is not lost or duplicated. If a piece of data for which the
peer protocol has buffer space cannot be successfully transmitted
within a reasonable length of time, then
the connection is considered broken and calls
will indicate an error with
-1 returns and with
.Er ETIMEDOUT
as the specific code
in the global variable
.Va errno .
The protocols optionally keep sockets
.Dq warm
by forcing transmissions
roughly every minute in the absence of other activity.
An error is then indicated if no response can be
elicited on an otherwise
idle connection for a extended period (e.g. 5 minutes).
A
.Dv SIGPIPE
signal is raised if a process sends
on a broken stream; this causes naive processes,
which do not handle the signal, to exit.
.Pp
.Dv SOCK_SEQPACKET
sockets employ the same system calls
as
.Dv SOCK_STREAM
sockets. The only difference
is that
.Xr read 2
calls will return only the amount of data requested,
and any remaining in the arriving packet will be discarded.
.Pp
.Dv SOCK_DGRAM
and
.Dv SOCK_RAW
sockets allow sending of datagrams to correspondents
named in
.Xr send 2
calls. Datagrams are generally received with
.Xr recvfrom 2 ,
which returns the next datagram with its return address.
.Pp
An
.Xr fcntl 2
call can be used to specify a process group to receive
a
.Dv SIGURG
signal when the out-of-band data arrives.
It may also enable non-blocking I/O
and asynchronous notification of I/O events
via
.Dv SIGIO .
.Pp
The operation of sockets is controlled by socket level
.Em options .
These options are defined in the file
.Ao Pa sys/socket.h Ac .
.Xr Setsockopt 2
and
.Xr getsockopt 2
are used to set and get options, respectively.
.Sh RETURN VALUES
A -1 is returned if an error occurs, otherwise the return
value is a descriptor referencing the socket.
.Sh ERRORS
The
.Fn socket
call fails if:
.Bl -tag -width Er
.It Bq Er EPROTONOSUPPORT
The protocol type or the specified protocol is not supported
within this domain.
.It Bq Er EMFILE
The per-process descriptor table is full.
.It Bq Er ENFILE
The system file table is full.
.It Bq Er EACCES
Permission to create a socket of the specified type and/or protocol
is denied.
.It Bq Er ENOBUFS
Insufficient buffer space is available.
The socket cannot be created until sufficient resources are freed.
.El
.Sh SEE ALSO
.Xr accept 2 ,
.Xr bind 2 ,
.Xr connect 2 ,
.Xr getpeername 2 ,
.Xr getsockname 2 ,
.Xr getsockopt 2 ,
.Xr ioctl 2 ,
.Xr listen 2 ,
.Xr read 2 ,
.Xr recv 2 ,
.Xr select 2 ,
.Xr send 2 ,
.Xr shutdown 2 ,
.Xr socketpair 2 ,
.Xr write 2 ,
.Xr getprotoent 3 ,
.Xr netgraph 4 ,
.Xr protocols 5
.Rs
.%T "An Introductory 4.3 BSD Interprocess Communication Tutorial"
.%B PS1
.%N 7
.Re
.Rs
.%T "BSD Interprocess Communication Tutorial"
.%B PS1
.%N 8
.Re
.Sh HISTORY
The
.Fn socket
function call appeared in
.Bx 4.2 .