06a2ddb54d
emulated by BIOS using SMI interrupt. On those chipsets reading from the status port may be thousand times slower than usually. Sometimes this emilation is not working properly resulting in commands timing out and since we assume that inb() operation takes very little time to complete we need to adjust number of retries to keep waiting time within a designed limits (100ms). Measure time it takes to make read_status() call and adjust number of retries accordingly. To keep it simple, use TSC to measure inb() performance and keep it to amd64-only, since TSC may not available on older CPUs. Also enable detection of the AT controller absence on amd64. Reviewed by: jhb MFC after: 1 month
277 lines
8.2 KiB
C
277 lines
8.2 KiB
C
/*-
|
|
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer as
|
|
* the first lines of this file unmodified.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_kbd.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/malloc.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/atkbdc/atkbdc_subr.h>
|
|
#include <dev/atkbdc/atkbdcreg.h>
|
|
|
|
#include <isa/isareg.h>
|
|
#include <isa/isavar.h>
|
|
|
|
static int atkbdc_isa_probe(device_t dev);
|
|
static int atkbdc_isa_attach(device_t dev);
|
|
static device_t atkbdc_isa_add_child(device_t bus, int order, const char *name,
|
|
int unit);
|
|
|
|
static device_method_t atkbdc_isa_methods[] = {
|
|
DEVMETHOD(device_probe, atkbdc_isa_probe),
|
|
DEVMETHOD(device_attach, atkbdc_isa_attach),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
|
|
DEVMETHOD(bus_add_child, atkbdc_isa_add_child),
|
|
DEVMETHOD(bus_print_child, atkbdc_print_child),
|
|
DEVMETHOD(bus_read_ivar, atkbdc_read_ivar),
|
|
DEVMETHOD(bus_write_ivar, atkbdc_write_ivar),
|
|
DEVMETHOD(bus_get_resource_list,atkbdc_get_resource_list),
|
|
DEVMETHOD(bus_alloc_resource, bus_generic_rl_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource),
|
|
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
|
|
DEVMETHOD(bus_set_resource, bus_generic_rl_set_resource),
|
|
DEVMETHOD(bus_delete_resource, bus_generic_rl_delete_resource),
|
|
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t atkbdc_isa_driver = {
|
|
ATKBDC_DRIVER_NAME,
|
|
atkbdc_isa_methods,
|
|
sizeof(atkbdc_softc_t *),
|
|
};
|
|
|
|
static struct isa_pnp_id atkbdc_ids[] = {
|
|
{ 0x0303d041, "Keyboard controller (i8042)" }, /* PNP0303 */
|
|
{ 0 }
|
|
};
|
|
|
|
static int
|
|
atkbdc_isa_probe(device_t dev)
|
|
{
|
|
struct resource *port0;
|
|
struct resource *port1;
|
|
u_long start;
|
|
u_long count;
|
|
int error;
|
|
int rid;
|
|
#if defined(__i386__) || defined(__amd64__)
|
|
bus_space_tag_t tag;
|
|
bus_space_handle_t ioh1;
|
|
volatile int i;
|
|
register_t flags;
|
|
#endif
|
|
|
|
/* check PnP IDs */
|
|
if (ISA_PNP_PROBE(device_get_parent(dev), dev, atkbdc_ids) == ENXIO)
|
|
return ENXIO;
|
|
|
|
device_set_desc(dev, "Keyboard controller (i8042)");
|
|
|
|
/*
|
|
* Adjust I/O port resources.
|
|
* The AT keyboard controller uses two ports (a command/data port
|
|
* 0x60 and a status port 0x64), which may be given to us in
|
|
* one resource (0x60 through 0x64) or as two separate resources
|
|
* (0x60 and 0x64). Some brain-damaged ACPI BIOS has reversed
|
|
* command/data port and status port. Furthermore, /boot/device.hints
|
|
* may contain just one port, 0x60. We shall adjust resource settings
|
|
* so that these two ports are available as two separate resources
|
|
* in correct order.
|
|
*/
|
|
device_quiet(dev);
|
|
rid = 0;
|
|
if (bus_get_resource(dev, SYS_RES_IOPORT, rid, &start, &count) != 0)
|
|
return ENXIO;
|
|
if (start == IO_KBD + KBD_STATUS_PORT) {
|
|
start = IO_KBD;
|
|
count++;
|
|
}
|
|
if (count > 1) /* adjust the count and/or start port */
|
|
bus_set_resource(dev, SYS_RES_IOPORT, rid, start, 1);
|
|
port0 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
|
|
if (port0 == NULL)
|
|
return ENXIO;
|
|
rid = 1;
|
|
if (bus_get_resource(dev, SYS_RES_IOPORT, rid, NULL, NULL) != 0)
|
|
bus_set_resource(dev, SYS_RES_IOPORT, 1,
|
|
start + KBD_STATUS_PORT, 1);
|
|
port1 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
|
|
if (port1 == NULL) {
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, port0);
|
|
return ENXIO;
|
|
}
|
|
|
|
#if defined(__i386__) || defined(__amd64__)
|
|
/*
|
|
* Check if we really have AT keyboard controller. Poll status
|
|
* register until we get "all clear" indication. If no such
|
|
* indication comes, it probably means that there is no AT
|
|
* keyboard controller present. Give up in such case. Check relies
|
|
* on the fact that reading from non-existing in/out port returns
|
|
* 0xff on i386. May or may not be true on other platforms.
|
|
*/
|
|
tag = rman_get_bustag(port0);
|
|
ioh1 = rman_get_bushandle(port1);
|
|
flags = intr_disable();
|
|
for (i = 0; i != 65535; i++) {
|
|
if ((bus_space_read_1(tag, ioh1, 0) & 0x2) == 0)
|
|
break;
|
|
}
|
|
intr_restore(flags);
|
|
if (i == 65535) {
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, port0);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 1, port1);
|
|
if (bootverbose)
|
|
device_printf(dev, "AT keyboard controller not found\n");
|
|
return ENXIO;
|
|
}
|
|
#endif
|
|
|
|
device_verbose(dev);
|
|
|
|
error = atkbdc_probe_unit(device_get_unit(dev), port0, port1);
|
|
if (error == 0)
|
|
bus_generic_probe(dev);
|
|
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, port0);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 1, port1);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
atkbdc_isa_attach(device_t dev)
|
|
{
|
|
atkbdc_softc_t *sc;
|
|
int unit;
|
|
int error;
|
|
int rid;
|
|
|
|
unit = device_get_unit(dev);
|
|
sc = *(atkbdc_softc_t **)device_get_softc(dev);
|
|
if (sc == NULL) {
|
|
/*
|
|
* We have to maintain two copies of the kbdc_softc struct,
|
|
* as the low-level console needs to have access to the
|
|
* keyboard controller before kbdc is probed and attached.
|
|
* kbdc_soft[] contains the default entry for that purpose.
|
|
* See atkbdc.c. XXX
|
|
*/
|
|
sc = atkbdc_get_softc(unit);
|
|
if (sc == NULL)
|
|
return ENOMEM;
|
|
}
|
|
|
|
rid = 0;
|
|
sc->retry = 5000;
|
|
sc->port0 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->port0 == NULL)
|
|
return ENXIO;
|
|
rid = 1;
|
|
sc->port1 = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->port1 == NULL) {
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->port0);
|
|
return ENXIO;
|
|
}
|
|
|
|
error = atkbdc_attach_unit(unit, sc, sc->port0, sc->port1);
|
|
if (error) {
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->port0);
|
|
bus_release_resource(dev, SYS_RES_IOPORT, 1, sc->port1);
|
|
return error;
|
|
}
|
|
*(atkbdc_softc_t **)device_get_softc(dev) = sc;
|
|
|
|
bus_generic_attach(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static device_t
|
|
atkbdc_isa_add_child(device_t bus, int order, const char *name, int unit)
|
|
{
|
|
atkbdc_device_t *ivar;
|
|
device_t child;
|
|
int t;
|
|
|
|
ivar = malloc(sizeof(struct atkbdc_device), M_ATKBDDEV,
|
|
M_NOWAIT | M_ZERO);
|
|
if (!ivar)
|
|
return NULL;
|
|
|
|
child = device_add_child_ordered(bus, order, name, unit);
|
|
if (child == NULL) {
|
|
free(ivar, M_ATKBDDEV);
|
|
return child;
|
|
}
|
|
|
|
resource_list_init(&ivar->resources);
|
|
ivar->rid = order;
|
|
|
|
/*
|
|
* If the device is not created by the PnP BIOS or ACPI,
|
|
* refer to device hints for IRQ.
|
|
*/
|
|
if (ISA_PNP_PROBE(device_get_parent(bus), bus, atkbdc_ids) != 0) {
|
|
if (resource_int_value(name, unit, "irq", &t) != 0)
|
|
t = -1;
|
|
} else {
|
|
t = bus_get_resource_start(bus, SYS_RES_IRQ, ivar->rid);
|
|
}
|
|
if (t > 0)
|
|
resource_list_add(&ivar->resources, SYS_RES_IRQ, ivar->rid,
|
|
t, t, 1);
|
|
|
|
if (resource_disabled(name, unit))
|
|
device_disable(child);
|
|
|
|
device_set_ivars(child, ivar);
|
|
|
|
return child;
|
|
}
|
|
|
|
DRIVER_MODULE(atkbdc, isa, atkbdc_isa_driver, atkbdc_devclass, 0, 0);
|
|
DRIVER_MODULE(atkbdc, acpi, atkbdc_isa_driver, atkbdc_devclass, 0, 0);
|