3903a68111
dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
118 lines
5.2 KiB
C
118 lines
5.2 KiB
C
/*-
|
|
* Copyright (c) 2009-2015 LSI Corp.
|
|
* Copyright (c) 2013-2015 Avago Technologies
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2009-2015 LSI Corporation.
|
|
* Copyright (c) 2013-2015 Avago Technologies
|
|
*
|
|
*
|
|
* Name: mpi2_ra.h
|
|
* Title: MPI RAID Accelerator messages and structures
|
|
* Creation Date: April 13, 2009
|
|
*
|
|
* mpi2_ra.h Version: 02.00.00
|
|
*
|
|
* Version History
|
|
* ---------------
|
|
*
|
|
* Date Version Description
|
|
* -------- -------- ------------------------------------------------------
|
|
* 05-06-09 02.00.00 Initial version.
|
|
* --------------------------------------------------------------------------
|
|
*/
|
|
|
|
#ifndef MPI2_RA_H
|
|
#define MPI2_RA_H
|
|
|
|
/* generic structure for RAID Accelerator Control Block */
|
|
typedef struct _MPI2_RAID_ACCELERATOR_CONTROL_BLOCK
|
|
{
|
|
U32 Reserved[8]; /* 0x00 */
|
|
U32 RaidAcceleratorCDB[1]; /* 0x20 */
|
|
} MPI2_RAID_ACCELERATOR_CONTROL_BLOCK,
|
|
MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_CONTROL_BLOCK,
|
|
Mpi2RAIDAcceleratorControlBlock_t,
|
|
MPI2_POINTER pMpi2RAIDAcceleratorControlBlock_t;
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* RAID Accelerator Messages
|
|
*
|
|
*******************************************************************************/
|
|
|
|
/* RAID Accelerator Request Message */
|
|
typedef struct _MPI2_RAID_ACCELERATOR_REQUEST
|
|
{
|
|
U16 Reserved0; /* 0x00 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved1; /* 0x04 */
|
|
U8 Reserved2; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved3; /* 0x0A */
|
|
U64 RaidAcceleratorControlBlockAddress; /* 0x0C */
|
|
U8 DmaEngineNumber; /* 0x14 */
|
|
U8 Reserved4; /* 0x15 */
|
|
U16 Reserved5; /* 0x16 */
|
|
U32 Reserved6; /* 0x18 */
|
|
U32 Reserved7; /* 0x1C */
|
|
U32 Reserved8; /* 0x20 */
|
|
} MPI2_RAID_ACCELERATOR_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_REQUEST,
|
|
Mpi2RAIDAcceleratorRequest_t, MPI2_POINTER pMpi2RAIDAcceleratorRequest_t;
|
|
|
|
|
|
/* RAID Accelerator Error Reply Message */
|
|
typedef struct _MPI2_RAID_ACCELERATOR_REPLY
|
|
{
|
|
U16 Reserved0; /* 0x00 */
|
|
U8 MsgLength; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved1; /* 0x04 */
|
|
U8 Reserved2; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved3; /* 0x0A */
|
|
U16 Reserved4; /* 0x0C */
|
|
U16 IOCStatus; /* 0x0E */
|
|
U32 IOCLogInfo; /* 0x10 */
|
|
U32 ProductSpecificData[3]; /* 0x14 */
|
|
} MPI2_RAID_ACCELERATOR_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_REPLY,
|
|
Mpi2RAIDAcceleratorReply_t, MPI2_POINTER pMpi2RAIDAcceleratorReply_t;
|
|
|
|
|
|
#endif
|
|
|
|
|