freebsd-skq/sys/i386/include/intr_machdep.h
John Baldwin 215e7c161a Rework how we wire up interrupt sources to CPUs:
- Throw out all of the logical APIC ID stuff.  The Intel docs are somewhat
  ambiguous, but it seems that the "flat" cluster model we are currently
  using is only supported on Pentium and P6 family CPUs.  The other
  "hierarchy" cluster model that is supported on all Intel CPUs with
  local APICs is severely underdocumented.  For example, it's not clear
  if the OS needs to glean the topology of the APIC hierarchy from
  somewhere (neither ACPI nor MP Table include it) and setup the logical
  clusters based on the physical hierarchy or not.  Not only that, but on
  certain Intel chipsets, even though there were 4 CPUs in a logical
  cluster, all the interrupts were only sent to one CPU anyway.
- We now bind interrupts to individual CPUs using physical addressing via
  the local APIC IDs.  This code has also moved out of the ioapic PIC
  driver and into the common interrupt source code so that it can be
  shared with MSI interrupt sources since MSI is addressed to APICs the
  same way that I/O APIC pins are.
- Interrupt source classes grow a new method pic_assign_cpu() to bind an
  interrupt source to a specific local APIC ID.
- The SMP code now tells the interrupt code which CPUs are avaiable to
  handle interrupts in a simpler and more intuitive manner.  For one thing,
  it means we could now choose to not route interrupts to HT cores if we
  wanted to (this code is currently in place in fact, but under an #if 0
  for now).
- For now we simply do static round-robin of IRQs to CPUs when the first
  interrupt handler just as before, with the change that IRQs are now
  bound to individual CPUs rather than groups of up to 4 CPUs.
- Because the IRQ to CPU mapping has now been moved up a layer, it would
  be easier to manage this mapping from higher levels.  For example, we
  could allow drivers to specify a CPU affinity map for their interrupts,
  or we could allow a userland tool to bind IRQs to specific CPUs.

The MFC is tentative, but I want to see if this fixes problems some folks
had with UP APIC kernels on 6.0 on SMP machines (an SMP kernel would work
fine, but a UP APIC kernel (such as GENERIC in RELENG_6) would lose
interrupts).

MFC after:	1 week
2006-02-28 22:24:55 +00:00

142 lines
4.9 KiB
C

/*-
* Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef __MACHINE_INTR_MACHDEP_H__
#define __MACHINE_INTR_MACHDEP_H__
#ifdef _KERNEL
/*
* The maximum number of I/O interrupts we allow. This number is rather
* arbitrary as it is just the maximum IRQ resource value. The interrupt
* source for a given IRQ maps that I/O interrupt to device interrupt
* source whether it be a pin on an interrupt controller or an MSI interrupt.
* The 16 ISA IRQs are assigned fixed IDT vectors, but all other device
* interrupts allocate IDT vectors on demand. Currently we have 191 IDT
* vectors available for device interrupts. On many systems with I/O APICs,
* a lot of the IRQs are not used, so this number can be much larger than
* 191 and still be safe since only interrupt sources in actual use will
* allocate IDT vectors.
*
* For now we stick with 255 as ISA IRQs and PCI intline IRQs only allow
* for IRQs in the range 0 - 254. When MSI support is added this number
* will likely increase.
*/
#define NUM_IO_INTS 255
/*
* - 1 ??? dummy counter.
* - 2 counters for each I/O interrupt.
* - 1 counter for each CPU for lapic timer.
* - 7 counters for each CPU for IPI counters for SMP.
*/
#ifdef SMP
#define INTRCNT_COUNT (1 + NUM_IO_INTS * 2 + 1)
#else
#define INTRCNT_COUNT (1 + NUM_IO_INTS * 2 + (1 + 7) * MAXCPU)
#endif
#ifndef LOCORE
typedef void inthand_t(u_int cs, u_int ef, u_int esp, u_int ss);
#define IDTVEC(name) __CONCAT(X,name)
struct intsrc;
/*
* Methods that a PIC provides to mask/unmask a given interrupt source,
* "turn on" the interrupt on the CPU side by setting up an IDT entry, and
* return the vector associated with this source.
*/
struct pic {
void (*pic_enable_source)(struct intsrc *);
void (*pic_disable_source)(struct intsrc *, int);
void (*pic_eoi_source)(struct intsrc *);
void (*pic_enable_intr)(struct intsrc *);
int (*pic_vector)(struct intsrc *);
int (*pic_source_pending)(struct intsrc *);
void (*pic_suspend)(struct intsrc *);
void (*pic_resume)(struct intsrc *);
int (*pic_config_intr)(struct intsrc *, enum intr_trigger,
enum intr_polarity);
void (*pic_assign_cpu)(struct intsrc *, u_int apic_id);
};
/* Flags for pic_disable_source() */
enum {
PIC_EOI,
PIC_NO_EOI,
};
/*
* An interrupt source. The upper-layer code uses the PIC methods to
* control a given source. The lower-layer PIC drivers can store additional
* private data in a given interrupt source such as an interrupt pin number
* or an I/O APIC pointer.
*/
struct intsrc {
struct pic *is_pic;
struct intr_event *is_event;
u_long *is_count;
u_long *is_straycount;
u_int is_index;
u_int is_enabled:1;
};
struct trapframe;
extern struct mtx icu_lock;
extern int elcr_found;
/* XXX: The elcr_* prototypes probably belong somewhere else. */
int elcr_probe(void);
enum intr_trigger elcr_read_trigger(u_int irq);
void elcr_resume(void);
void elcr_write_trigger(u_int irq, enum intr_trigger trigger);
#ifdef SMP
void intr_add_cpu(u_int apic_id);
#else
#define intr_add_cpu(apic_id)
#endif
int intr_add_handler(const char *name, int vector, driver_intr_t handler,
void *arg, enum intr_type flags, void **cookiep);
int intr_config_intr(int vector, enum intr_trigger trig,
enum intr_polarity pol);
void intr_execute_handlers(struct intsrc *isrc, struct trapframe *frame);
struct intsrc *intr_lookup_source(int vector);
int intr_register_source(struct intsrc *isrc);
int intr_remove_handler(void *cookie);
void intr_resume(void);
void intr_suspend(void);
void intrcnt_add(const char *name, u_long **countp);
#endif /* !LOCORE */
#endif /* _KERNEL */
#endif /* !__MACHINE_INTR_MACHDEP_H__ */