d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e63cefb08a
freebsd-skq/sbin/camcontrol/fwdownload.c
pfg 7551d83c35 various: general adoption of SPDX licensing ID tags. 
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:37:16 +00:00

1054 lines
29 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2011 Sandvine Incorporated. All rights reserved.
* Copyright (c) 2002-2011 Andre Albsmeier <andre@albsmeier.net>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This software is derived from Andre Albsmeier's fwprog.c which contained
* the following note:
*
* Many thanks goes to Marc Frajola <marc@terasolutions.com> from
* TeraSolutions for the initial idea and his programme for upgrading
* the firmware of I*M DDYS drives.
*/
/*
* BEWARE:
*
* The fact that you see your favorite vendor listed below does not
* imply that your equipment won't break when you use this software
* with it. It only means that the firmware of at least one device type
* of each vendor listed has been programmed successfully using this code.
*
* The -s option simulates a download but does nothing apart from that.
* It can be used to check what chunk sizes would have been used with the
* specified device.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/stat.h>
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <camlib.h>
#include "progress.h"
#include "camcontrol.h"
#define WB_TIMEOUT 50000 /* 50 seconds */
typedef enum {
VENDOR_HGST,
VENDOR_HITACHI,
VENDOR_HP,
VENDOR_IBM,
VENDOR_PLEXTOR,
VENDOR_QUALSTAR,
VENDOR_QUANTUM,
VENDOR_SAMSUNG,
VENDOR_SEAGATE,
VENDOR_SMART,
VENDOR_ATA,
VENDOR_UNKNOWN
} fw_vendor_t;
/*
* FW_TUR_READY: The drive must return good status for a test unit ready.
*
* FW_TUR_NOT_READY: The drive must return not ready status for a test unit
* ready. You may want this in a removable media drive.
*
* FW_TUR_NA: It doesn't matter whether the drive is ready or not.
* This may be the case for a removable media drive.
*/
typedef enum {
FW_TUR_NONE,
FW_TUR_READY,
FW_TUR_NOT_READY,
FW_TUR_NA
} fw_tur_status;
/*
* FW_TIMEOUT_DEFAULT: Attempt to probe for a WRITE BUFFER timeout
* value from the drive. If we get an answer,
* use the Recommended timeout. Otherwise,
* use the default value from the table.
*
* FW_TIMEOUT_DEV_REPORTED: The timeout value was probed directly from
* the device.
*
* FW_TIMEOUT_NO_PROBE: Do not ask the device for a WRITE BUFFER
* timeout value. Use the device-specific
* value.
*
* FW_TIMEOUT_USER_SPEC: The user specified a timeout on the command
* line with the -t option. This overrides any
* probe or default timeout.
*/
typedef enum {
FW_TIMEOUT_DEFAULT,
FW_TIMEOUT_DEV_REPORTED,
FW_TIMEOUT_NO_PROBE,
FW_TIMEOUT_USER_SPEC
} fw_timeout_type;
/*
* type: Enumeration for the particular vendor.
*
* pattern: Pattern to match for the Vendor ID from the SCSI
* Inquiry data.
*
* dev_type: SCSI device type to match, or T_ANY to match any
* device from the given vendor. Note that if there
* is a specific device type listed for a particular
* vendor, it must be listed before a T_ANY entry.
*
* max_pkt_size: Maximum packet size when talking to a device. Note
* that although large data sizes may be supported by
* the target device, they may not be supported by the
* OS or the controller.
*
* cdb_byte2: This specifies byte 2 (byte 1 when counting from 0)
* of the CDB. This is generally the WRITE BUFFER mode.
*
* cdb_byte2_last: This specifies byte 2 for the last chunk of the
* download.
*
* inc_cdb_buffer_id: Increment the buffer ID by 1 for each chunk sent
* down to the drive.
*
* inc_cdb_offset: Increment the offset field in the CDB with the byte
* offset into the firmware file.
*
* tur_status: Pay attention to whether the device is ready before
* upgrading the firmware, or not. See above for the
* values.
*/
struct fw_vendor {
fw_vendor_t type;
const char *pattern;
int dev_type;
int max_pkt_size;
u_int8_t cdb_byte2;
u_int8_t cdb_byte2_last;
int inc_cdb_buffer_id;
int inc_cdb_offset;
fw_tur_status tur_status;
int timeout_ms;
fw_timeout_type timeout_type;
};
/*
* Vendor notes:
*
* HGST: The packets need to be sent in multiples of 4K.
*
* IBM: For LTO and TS drives, the buffer ID is ignored in mode 7 (and
* some other modes). It treats the request as a firmware download.
* The offset (and therefore the length of each chunk sent) needs
* to be a multiple of the offset boundary specified for firmware
* (buffer ID 4) in the read buffer command. At least for LTO-6,
* that seems to be 0, but using a 32K chunk size should satisfy
* most any alignment requirement.
*
* SmrtStor: Mode 5 is also supported, but since the firmware is 400KB or
* so, we can't fit it in a single request in most cases.
*/
static struct fw_vendor vendors_list[] = {
{VENDOR_HGST, "HGST", T_DIRECT,
0x1000, 0x07, 0x07, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_HITACHI, "HITACHI", T_ANY,
0x8000, 0x05, 0x05, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_HP, "HP", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_IBM, "IBM", T_SEQUENTIAL,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_NA, 300 * 1000, FW_TIMEOUT_DEFAULT},
{VENDOR_IBM, "IBM", T_ANY,
0x8000, 0x05, 0x05, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_PLEXTOR, "PLEXTOR", T_ANY,
0x2000, 0x04, 0x05, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_QUALSTAR, "QUALSTAR", T_ANY,
0x2030, 0x05, 0x05, 0, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_QUANTUM, "QUANTUM", T_ANY,
0x2000, 0x04, 0x05, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SAMSUNG, "SAMSUNG", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SEAGATE, "SEAGATE", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SMART, "SmrtStor", T_DIRECT,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
/*
* We match any ATA device. This is really just a placeholder,
* since we won't actually send a WRITE BUFFER with any of the
* listed parameters. If a SATA device is behind a SAS controller,
* the SCSI to ATA translation code (at least for LSI) doesn't
* generally translate a SCSI WRITE BUFFER into an ATA DOWNLOAD
* MICROCODE command. So, we use the SCSI ATA PASS_THROUGH command
* to send the ATA DOWNLOAD MICROCODE command instead.
*/
{VENDOR_ATA, "ATA", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT,
FW_TIMEOUT_NO_PROBE},
{VENDOR_UNKNOWN, NULL, T_ANY,
0x0000, 0x00, 0x00, 0, 0, FW_TUR_NONE, WB_TIMEOUT, FW_TIMEOUT_DEFAULT}
};
struct fw_timeout_desc {
fw_timeout_type timeout_type;
const char *timeout_desc;
};
static const struct fw_timeout_desc fw_timeout_desc_table[] = {
{ FW_TIMEOUT_DEFAULT, "the default" },
{ FW_TIMEOUT_DEV_REPORTED, "recommended by this particular device" },
{ FW_TIMEOUT_NO_PROBE, "the default" },
{ FW_TIMEOUT_USER_SPEC, "what was specified on the command line" }
};
#ifndef ATA_DOWNLOAD_MICROCODE
#define ATA_DOWNLOAD_MICROCODE 0x92
#endif
#define USE_OFFSETS_FEATURE 0x3
#ifndef LOW_SECTOR_SIZE
#define LOW_SECTOR_SIZE 512
#endif
#define ATA_MAKE_LBA(o, p) \
((((((o) / LOW_SECTOR_SIZE) >> 8) & 0xff) << 16) | \
((((o) / LOW_SECTOR_SIZE) & 0xff) << 8) | \
((((p) / LOW_SECTOR_SIZE) >> 8) & 0xff))
#define ATA_MAKE_SECTORS(p) (((p) / 512) & 0xff)
#ifndef UNKNOWN_MAX_PKT_SIZE
#define UNKNOWN_MAX_PKT_SIZE 0x8000
#endif
static struct fw_vendor *fw_get_vendor(struct cam_device *cam_dev,
struct ata_params *ident_buf);
static int fw_get_timeout(struct cam_device *cam_dev, struct fw_vendor *vp,
int task_attr, int retry_count, int timeout);
static int fw_validate_ibm(struct cam_device *dev, int retry_count,
int timeout, int fd, char *buf,
const char *fw_img_path, int quiet);
static char *fw_read_img(struct cam_device *dev, int retry_count,
int timeout, int quiet, const char *fw_img_path,
struct fw_vendor *vp, int *num_bytes);
static int fw_check_device_ready(struct cam_device *dev,
camcontrol_devtype devtype,
struct fw_vendor *vp, int printerrors,
int timeout);
static int fw_download_img(struct cam_device *cam_dev,
struct fw_vendor *vp, char *buf, int img_size,
int sim_mode, int printerrors, int quiet,
int retry_count, int timeout, const char */*name*/,
camcontrol_devtype devtype);
/*
* Find entry in vendors list that belongs to
* the vendor of given cam device.
*/
static struct fw_vendor *
fw_get_vendor(struct cam_device *cam_dev, struct ata_params *ident_buf)
{
char vendor[42];
struct fw_vendor *vp;
if (cam_dev == NULL)
return (NULL);
if (ident_buf != NULL) {
cam_strvis((u_char *)vendor, ident_buf->model,
sizeof(ident_buf->model), sizeof(vendor));
for (vp = vendors_list; vp->pattern != NULL; vp++) {
if (vp->type == VENDOR_ATA)
return (vp);
}
} else {
cam_strvis((u_char *)vendor, (u_char *)cam_dev->inq_data.vendor,
sizeof(cam_dev->inq_data.vendor), sizeof(vendor));
}
for (vp = vendors_list; vp->pattern != NULL; vp++) {
if (!cam_strmatch((const u_char *)vendor,
(const u_char *)vp->pattern, strlen(vendor))) {
if ((vp->dev_type == T_ANY)
|| (vp->dev_type == SID_TYPE(&cam_dev->inq_data)))
break;
}
}
return (vp);
}
static int
fw_get_timeout(struct cam_device *cam_dev, struct fw_vendor *vp,
int task_attr, int retry_count, int timeout)
{
struct scsi_report_supported_opcodes_one *one;
struct scsi_report_supported_opcodes_timeout *td;
uint8_t *buf = NULL;
uint32_t fill_len = 0, cdb_len = 0, rec_timeout = 0;
int retval = 0;
/*
* If the user has specified a timeout on the command line, we let
* him override any default or probed value.
*/
if (timeout != 0) {
vp->timeout_type = FW_TIMEOUT_USER_SPEC;
vp->timeout_ms = timeout;
goto bailout;
}
/*
* Check to see whether we should probe for a timeout for this
* device.
*/
if (vp->timeout_type == FW_TIMEOUT_NO_PROBE)
goto bailout;
retval = scsigetopcodes(/*device*/ cam_dev,
/*opcode_set*/ 1,
/*opcode*/ WRITE_BUFFER,
/*show_sa_errors*/ 1,
/*sa_set*/ 0,
/*service_action*/ 0,
/*timeout_desc*/ 1,
/*task_attr*/ task_attr,
/*retry_count*/ retry_count,
/*timeout*/ 10000,
/*verbose*/ 0,
/*fill_len*/ &fill_len,
/*data_ptr*/ &buf);
/*
* It isn't an error if we can't get a timeout descriptor. We just
* continue on with the default timeout.
*/
if (retval != 0) {
retval = 0;
goto bailout;
}
/*
* Even if the drive didn't return a SCSI error, if we don't have
* enough data to contain the one opcode descriptor, the CDB
* structure and a timeout descriptor, we don't have the timeout
* value we're looking for. So we'll just fall back to the
* default value.
*/
if (fill_len < (sizeof(*one) + sizeof(struct scsi_write_buffer) +
sizeof(*td)))
goto bailout;
one = (struct scsi_report_supported_opcodes_one *)buf;
/*
* If the drive claims to not support the WRITE BUFFER command...
* fall back to the default timeout value and let things fail on
* the actual firmware download.
*/
if ((one->support & RSO_ONE_SUP_MASK) == RSO_ONE_SUP_NOT_SUP)
goto bailout;
cdb_len = scsi_2btoul(one->cdb_length);
td = (struct scsi_report_supported_opcodes_timeout *)
&buf[sizeof(*one) + cdb_len];
rec_timeout = scsi_4btoul(td->recommended_time);
/*
* If the recommended timeout is 0, then the device has probably
* returned a bogus value.
*/
if (rec_timeout == 0)
goto bailout;
/* CAM timeouts are in ms */
rec_timeout *= 1000;
vp->timeout_ms = rec_timeout;
vp->timeout_type = FW_TIMEOUT_DEV_REPORTED;
bailout:
return (retval);
}
#define SVPD_IBM_FW_DESIGNATION 0x03
/*
* IBM LTO and TS tape drives have an INQUIRY VPD page 0x3 with the following
* format:
*/
struct fw_ibm_tape_fw_designation {
uint8_t device;
uint8_t page_code;
uint8_t reserved;
uint8_t length;
uint8_t ascii_length;
uint8_t reserved2[3];
uint8_t load_id[4];
uint8_t fw_rev[4];
uint8_t ptf_number[4];
uint8_t patch_number[4];
uint8_t ru_name[8];
uint8_t lib_seq_num[5];
};
/*
* The firmware for IBM tape drives has the following header format. The
* load_id and ru_name in the header file should match what is returned in
* VPD page 0x3.
*/
struct fw_ibm_tape_fw_header {
uint8_t unspec[4];
uint8_t length[4]; /* Firmware and header! */
uint8_t load_id[4];
uint8_t fw_rev[4];
uint8_t reserved[8];
uint8_t ru_name[8];
};
static int
fw_validate_ibm(struct cam_device *dev, int retry_count, int timeout, int fd,
char *buf, const char *fw_img_path, int quiet)
{
union ccb *ccb;
struct fw_ibm_tape_fw_designation vpd_page;
struct fw_ibm_tape_fw_header *header;
char drive_rev[sizeof(vpd_page.fw_rev) + 1];
char file_rev[sizeof(vpd_page.fw_rev) + 1];
int retval = 1;
ccb = cam_getccb(dev);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
goto bailout;
}
/* cam_getccb cleans up the header, caller has to zero the payload */
CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->csio);
bzero(&vpd_page, sizeof(vpd_page));
scsi_inquiry(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* inq_buf */ (u_int8_t *)&vpd_page,
/* inq_len */ sizeof(vpd_page),
/* evpd */ 1,
/* page_code */ SVPD_IBM_FW_DESIGNATION,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (retry_count != 0)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(dev, ccb) < 0) {
warn("error getting firmware designation page");
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
cam_freeccb(ccb);
ccb = NULL;
goto bailout;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
goto bailout;
}
/*
* Read the firmware header only.
*/
if (read(fd, buf, sizeof(*header)) != sizeof(*header)) {
warn("unable to read %zu bytes from %s", sizeof(*header),
fw_img_path);
goto bailout;
}
/* Rewind the file back to 0 for the full file read. */
if (lseek(fd, 0, SEEK_SET) == -1) {
warn("Unable to lseek");
goto bailout;
}
header = (struct fw_ibm_tape_fw_header *)buf;
bzero(drive_rev, sizeof(drive_rev));
bcopy(vpd_page.fw_rev, drive_rev, sizeof(vpd_page.fw_rev));
bzero(file_rev, sizeof(file_rev));
bcopy(header->fw_rev, file_rev, sizeof(header->fw_rev));
if (quiet == 0) {
fprintf(stdout, "Current Drive Firmware version: %s\n",
drive_rev);
fprintf(stdout, "Firmware File version: %s\n", file_rev);
}
/*
* For IBM tape drives the load ID and RU name reported by the
* drive should match what is in the firmware file.
*/
if (bcmp(vpd_page.load_id, header->load_id,
MIN(sizeof(vpd_page.load_id), sizeof(header->load_id))) != 0) {
warnx("Drive Firmware load ID 0x%x does not match firmware "
"file load ID 0x%x", scsi_4btoul(vpd_page.load_id),
scsi_4btoul(header->load_id));
goto bailout;
}
if (bcmp(vpd_page.ru_name, header->ru_name,
MIN(sizeof(vpd_page.ru_name), sizeof(header->ru_name))) != 0) {
warnx("Drive Firmware RU name 0x%jx does not match firmware "
"file RU name 0x%jx",
(uintmax_t)scsi_8btou64(vpd_page.ru_name),
(uintmax_t)scsi_8btou64(header->ru_name));
goto bailout;
}
if (quiet == 0)
fprintf(stdout, "Firmware file is valid for this drive.\n");
retval = 0;
bailout:
cam_freeccb(ccb);
return (retval);
}
/*
* Allocate a buffer and read fw image file into it
* from given path. Number of bytes read is stored
* in num_bytes.
*/
static char *
fw_read_img(struct cam_device *dev, int retry_count, int timeout, int quiet,
const char *fw_img_path, struct fw_vendor *vp, int *num_bytes)
{
int fd;
struct stat stbuf;
char *buf;
off_t img_size;
int skip_bytes = 0;
if ((fd = open(fw_img_path, O_RDONLY)) < 0) {
warn("Could not open image file %s", fw_img_path);
return (NULL);
}
if (fstat(fd, &stbuf) < 0) {
warn("Could not stat image file %s", fw_img_path);
goto bailout1;
}
if ((img_size = stbuf.st_size) == 0) {
warnx("Zero length image file %s", fw_img_path);
goto bailout1;
}
if ((buf = malloc(img_size)) == NULL) {
warnx("Could not allocate buffer to read image file %s",
fw_img_path);
goto bailout1;
}
/* Skip headers if applicable. */
switch (vp->type) {
case VENDOR_SEAGATE:
if (read(fd, buf, 16) != 16) {
warn("Could not read image file %s", fw_img_path);
goto bailout;
}
if (lseek(fd, 0, SEEK_SET) == -1) {
warn("Unable to lseek");
goto bailout;
}
if ((strncmp(buf, "SEAGATE,SEAGATE ", 16) == 0) ||
(img_size % 512 == 80))
skip_bytes = 80;
break;
case VENDOR_QUALSTAR:
skip_bytes = img_size % 1030;
break;
case VENDOR_IBM: {
if (vp->dev_type != T_SEQUENTIAL)
break;
if (fw_validate_ibm(dev, retry_count, timeout, fd, buf,
fw_img_path, quiet) != 0)
goto bailout;
break;
}
default:
break;
}
if (skip_bytes != 0) {
fprintf(stdout, "Skipping %d byte header.\n", skip_bytes);
if (lseek(fd, skip_bytes, SEEK_SET) == -1) {
warn("Could not lseek");
goto bailout;
}
img_size -= skip_bytes;
}
/* Read image into a buffer. */
if (read(fd, buf, img_size) != img_size) {
warn("Could not read image file %s", fw_img_path);
goto bailout;
}
*num_bytes = img_size;
close(fd);
return (buf);
bailout:
free(buf);
bailout1:
close(fd);
*num_bytes = 0;
return (NULL);
}
/*
* Returns 0 for "success", where success means that the device has met the
* requirement in the vendor structure for being ready or not ready when
* firmware is downloaded.
*
* Returns 1 for a failure to be ready to accept a firmware download.
* (e.g., a drive needs to be ready, but returns not ready)
*
* Returns -1 for any other failure.
*/
static int
fw_check_device_ready(struct cam_device *dev, camcontrol_devtype devtype,
struct fw_vendor *vp, int printerrors, int timeout)
{
union ccb *ccb;
int retval = 0;
int16_t *ptr = NULL;
size_t dxfer_len = 0;
if ((ccb = cam_getccb(dev)) == NULL) {
warnx("Could not allocate CCB");
retval = -1;
goto bailout;
}
CCB_CLEAR_ALL_EXCEPT_HDR(ccb);
if (devtype != CC_DT_SCSI) {
dxfer_len = sizeof(struct ata_params);
ptr = (uint16_t *)malloc(dxfer_len);
if (ptr == NULL) {
warnx("can't malloc memory for identify");
retval = -1;
goto bailout;
}
bzero(ptr, dxfer_len);
}
switch (devtype) {
case CC_DT_SCSI:
scsi_test_unit_ready(&ccb->csio,
/*retries*/ 0,
/*cbfcnp*/ NULL,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ 5000);
break;
case CC_DT_ATA_BEHIND_SCSI:
case CC_DT_ATA: {
retval = build_ata_cmd(ccb,
/*retries*/ 1,
/*flags*/ CAM_DIR_IN,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*protocol*/ AP_PROTO_PIO_IN,
/*ata_flags*/ AP_FLAG_BYT_BLOK_BYTES |
AP_FLAG_TLEN_SECT_CNT |
AP_FLAG_TDIR_FROM_DEV,
/*features*/ 0,
/*sector_count*/ (uint8_t) dxfer_len,
/*lba*/ 0,
/*command*/ ATA_ATA_IDENTIFY,
/*auxiliary*/ 0,
/*data_ptr*/ (uint8_t *)ptr,
/*dxfer_len*/ dxfer_len,
/*cdb_storage*/ NULL,
/*cdb_storage_len*/ 0,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ? timeout : 30 * 1000,
/*is48bit*/ 0,
/*devtype*/ devtype);
if (retval != 0) {
retval = -1;
warnx("%s: build_ata_cmd() failed, likely "
"programmer error", __func__);
goto bailout;
}
break;
}
default:
warnx("Unknown disk type %d", devtype);
retval = -1;
goto bailout;
break; /*NOTREACHED*/
}
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
retval = cam_send_ccb(dev, ccb);
if (retval != 0) {
warn("error sending %s CCB", (devtype == CC_DT_SCSI) ?
"Test Unit Ready" : "Identify");
retval = -1;
goto bailout;
}
if (((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
&& (vp->tur_status == FW_TUR_READY)) {
warnx("Device is not ready");
if (printerrors)
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
retval = 1;
goto bailout;
} else if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
&& (vp->tur_status == FW_TUR_NOT_READY)) {
warnx("Device cannot have media loaded when firmware is "
"downloaded");
retval = 1;
goto bailout;
}
bailout:
free(ptr);
cam_freeccb(ccb);
return (retval);
}
/*
* Download firmware stored in buf to cam_dev. If simulation mode
* is enabled, only show what packet sizes would be sent to the
* device but do not sent any actual packets
*/
static int
fw_download_img(struct cam_device *cam_dev, struct fw_vendor *vp,
char *buf, int img_size, int sim_mode, int printerrors, int quiet,
int retry_count, int timeout, const char *imgname,
camcontrol_devtype devtype)
{
struct scsi_write_buffer cdb;
progress_t progress;
int size = 0;
union ccb *ccb = NULL;
int pkt_count = 0;
int max_pkt_size;
u_int32_t pkt_size = 0;
char *pkt_ptr = buf;
u_int32_t offset;
int last_pkt = 0;
int retval = 0;
/*
* Check to see whether the device is ready to accept a firmware
* download.
*/
retval = fw_check_device_ready(cam_dev, devtype, vp, printerrors,
timeout);
if (retval != 0)
goto bailout;
if ((ccb = cam_getccb(cam_dev)) == NULL) {
warnx("Could not allocate CCB");
retval = 1;
goto bailout;
}
CCB_CLEAR_ALL_EXCEPT_HDR(ccb);
max_pkt_size = vp->max_pkt_size;
if (max_pkt_size == 0)
max_pkt_size = UNKNOWN_MAX_PKT_SIZE;
pkt_size = max_pkt_size;
progress_init(&progress, imgname, size = img_size);
/* Download single fw packets. */
do {
if (img_size <= max_pkt_size) {
last_pkt = 1;
pkt_size = img_size;
}
progress_update(&progress, size - img_size);
if (((sim_mode == 0) && (quiet == 0))
|| ((sim_mode != 0) && (printerrors == 0)))
progress_draw(&progress);
bzero(&cdb, sizeof(cdb));
switch (devtype) {
case CC_DT_SCSI:
cdb.opcode = WRITE_BUFFER;
cdb.control = 0;
/* Parameter list length. */
scsi_ulto3b(pkt_size, &cdb.length[0]);
offset = vp->inc_cdb_offset ? (pkt_ptr - buf) : 0;
scsi_ulto3b(offset, &cdb.offset[0]);
cdb.byte2 = last_pkt ? vp->cdb_byte2_last :
vp->cdb_byte2;
cdb.buffer_id = vp->inc_cdb_buffer_id ? pkt_count : 0;
/* Zero out payload of ccb union after ccb header. */
CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->csio);
/*
* Copy previously constructed cdb into ccb_scsiio
* struct.
*/
bcopy(&cdb, &ccb->csio.cdb_io.cdb_bytes[0],
sizeof(struct scsi_write_buffer));
/* Fill rest of ccb_scsiio struct. */
cam_fill_csio(&ccb->csio, /* ccb_scsiio*/
retry_count, /* retries*/
NULL, /* cbfcnp*/
CAM_DIR_OUT | CAM_DEV_QFRZDIS, /* flags*/
CAM_TAG_ACTION_NONE, /* tag_action*/
(u_char *)pkt_ptr, /* data_ptr*/
pkt_size, /* dxfer_len*/
SSD_FULL_SIZE, /* sense_len*/
sizeof(struct scsi_write_buffer), /* cdb_len*/
timeout ? timeout : WB_TIMEOUT); /* timeout*/
break;
case CC_DT_ATA:
case CC_DT_ATA_BEHIND_SCSI: {
uint32_t off;
off = (uint32_t)(pkt_ptr - buf);
retval = build_ata_cmd(ccb,
/*retry_count*/ retry_count,
/*flags*/ CAM_DIR_OUT | CAM_DEV_QFRZDIS,
/*tag_action*/ CAM_TAG_ACTION_NONE,
/*protocol*/ AP_PROTO_PIO_OUT,
/*ata_flags*/ AP_FLAG_BYT_BLOK_BYTES |
AP_FLAG_TLEN_SECT_CNT |
AP_FLAG_TDIR_TO_DEV,
/*features*/ USE_OFFSETS_FEATURE,
/*sector_count*/ ATA_MAKE_SECTORS(pkt_size),
/*lba*/ ATA_MAKE_LBA(off, pkt_size),
/*command*/ ATA_DOWNLOAD_MICROCODE,
/*auxiliary*/ 0,
/*data_ptr*/ (uint8_t *)pkt_ptr,
/*dxfer_len*/ pkt_size,
/*cdb_storage*/ NULL,
/*cdb_storage_len*/ 0,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ? timeout : WB_TIMEOUT,
/*is48bit*/ 0,
/*devtype*/ devtype);
if (retval != 0) {
warnx("%s: build_ata_cmd() failed, likely "
"programmer error", __func__);
goto bailout;
}
break;
}
default:
warnx("Unknown device type %d", devtype);
retval = 1;
goto bailout;
break; /*NOTREACHED*/
}
if (!sim_mode) {
/* Execute the command. */
if (cam_send_ccb(cam_dev, ccb) < 0 ||
(ccb->ccb_h.status & CAM_STATUS_MASK) !=
CAM_REQ_CMP) {
warnx("Error writing image to device");
if (printerrors)
cam_error_print(cam_dev, ccb,
CAM_ESF_ALL, CAM_EPF_ALL, stderr);
retval = 1;
goto bailout;
}
} else if (printerrors) {
cam_error_print(cam_dev, ccb, CAM_ESF_COMMAND, 0,
stdout);
}
/* Prepare next round. */
pkt_count++;
pkt_ptr += pkt_size;
img_size -= pkt_size;
} while(!last_pkt);
bailout:
if (quiet == 0)
progress_complete(&progress, size - img_size);
cam_freeccb(ccb);
return (retval);
}
int
fwdownload(struct cam_device *device, int argc, char **argv,
char *combinedopt, int printerrors, int task_attr, int retry_count,
int timeout)
{
union ccb *ccb = NULL;
struct fw_vendor *vp;
char *fw_img_path = NULL;
struct ata_params *ident_buf = NULL;
camcontrol_devtype devtype;
char *buf = NULL;
int img_size;
int c;
int sim_mode = 0;
int confirmed = 0;
int quiet = 0;
int retval = 0;
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch (c) {
case 'f':
fw_img_path = optarg;
break;
case 'q':
quiet = 1;
break;
case 's':
sim_mode = 1;
break;
case 'y':
confirmed = 1;
break;
default:
break;
}
}
if (fw_img_path == NULL)
errx(1, "you must specify a firmware image file using -f "
"option");
retval = get_device_type(device, retry_count, timeout, printerrors,
&devtype);
if (retval != 0)
errx(1, "Unable to determine device type");
if ((devtype == CC_DT_ATA)
|| (devtype == CC_DT_ATA_BEHIND_SCSI)) {
ccb = cam_getccb(device);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
retval = 1;
goto bailout;
}
if (ata_do_identify(device, retry_count, timeout, ccb,
&ident_buf) != 0) {
retval = 1;
goto bailout;
}
} else if (devtype != CC_DT_SCSI)
errx(1, "Unsupported device type %d", devtype);
vp = fw_get_vendor(device, ident_buf);
/*
* Bail out if we have an unknown vendor and this isn't an ATA
* disk. For a SCSI disk, we have no chance of working properly
* with the default values in the VENDOR_UNKNOWN case. For an ATA
* disk connected via an ATA transport, we may work for drives that
* support the ATA_DOWNLOAD_MICROCODE command.
*/
if (((vp == NULL)
|| (vp->type == VENDOR_UNKNOWN))
&& (devtype == CC_DT_SCSI))
errx(1, "Unsupported device");
retval = fw_get_timeout(device, vp, task_attr, retry_count, timeout);
if (retval != 0) {
warnx("Unable to get a firmware download timeout value");
goto bailout;
}
buf = fw_read_img(device, retry_count, timeout, quiet, fw_img_path,
vp, &img_size);
if (buf == NULL) {
retval = 1;
goto bailout;
}
if (!confirmed) {
fprintf(stdout, "You are about to download firmware image (%s)"
" into the following device:\n",
fw_img_path);
if (devtype == CC_DT_SCSI) {
if (scsidoinquiry(device, argc, argv, combinedopt,
MSG_SIMPLE_Q_TAG, 0, 5000) != 0) {
warnx("Error sending inquiry");
retval = 1;
goto bailout;
}
} else {
printf("%s%d: ", device->device_name,
device->dev_unit_num);
ata_print_ident(ident_buf);
camxferrate(device);
free(ident_buf);
}
fprintf(stdout, "Using a timeout of %u ms, which is %s.\n",
vp->timeout_ms,
fw_timeout_desc_table[vp->timeout_type].timeout_desc);
fprintf(stdout, "\nIt may damage your drive. ");
if (!get_confirmation()) {
retval = 1;
goto bailout;
}
}
if ((sim_mode != 0) && (quiet == 0))
fprintf(stdout, "Running in simulation mode\n");
if (fw_download_img(device, vp, buf, img_size, sim_mode, printerrors,
quiet, retry_count, vp->timeout_ms, fw_img_path, devtype) != 0) {
fprintf(stderr, "Firmware download failed\n");
retval = 1;
goto bailout;
} else if (quiet == 0)
fprintf(stdout, "Firmware download successful\n");
bailout:
cam_freeccb(ccb);
free(buf);
return (retval);
}
Reference in New Issue View Git Blame Copy Permalink