d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e7a0b68540
freebsd-skq/sys/net80211/ieee80211_adhoc.c
Adrian Chadd 0b5aeb89eb [net80211] Send a probe request after IBSS node discovery 
This sends a probe request after IBSS node discovery through
beacon frames. This allows things like HT and VHT capabilities
to be "negotiated" in adhoc mode.

It is .. kinda fire and pray - this isn't retried after discovery
so it's quite possible that nodes occasionally don't come up with
HT/VHT rate upgrades. At some point it may be a fun side project
to add support for retrying these probe requests/negotiations
after IBSS node discovery.

Tested:

* tested with multiple ath(4) NICs in 11n mode.

Differential Revision:	https://reviews.freebsd.org/D24979
2020-06-05 00:11:44 +00:00

1054 lines
30 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifdef __FreeBSD__
__FBSDID("$FreeBSD$");
#endif
/*
* IEEE 802.11 IBSS mode support.
*/
#include "opt_inet.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/endian.h>
#include <sys/errno.h>
#include <sys/proc.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_media.h>
#include <net/if_llc.h>
#include <net/ethernet.h>
#include <net/bpf.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_adhoc.h>
#include <net80211/ieee80211_input.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#ifdef IEEE80211_SUPPORT_TDMA
#include <net80211/ieee80211_tdma.h>
#endif
#include <net80211/ieee80211_sta.h>
#define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2)
static void adhoc_vattach(struct ieee80211vap *);
static int adhoc_newstate(struct ieee80211vap *, enum ieee80211_state, int);
static int adhoc_input(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_rx_stats *, int, int);
static void adhoc_recv_mgmt(struct ieee80211_node *, struct mbuf *,
int subtype, const struct ieee80211_rx_stats *, int, int);
static void ahdemo_recv_mgmt(struct ieee80211_node *, struct mbuf *,
int subtype, const struct ieee80211_rx_stats *rxs, int, int);
static void adhoc_recv_ctl(struct ieee80211_node *, struct mbuf *, int subtype);
void
ieee80211_adhoc_attach(struct ieee80211com *ic)
{
ic->ic_vattach[IEEE80211_M_IBSS] = adhoc_vattach;
ic->ic_vattach[IEEE80211_M_AHDEMO] = adhoc_vattach;
}
void
ieee80211_adhoc_detach(struct ieee80211com *ic)
{
}
static void
adhoc_vdetach(struct ieee80211vap *vap)
{
}
static void
adhoc_vattach(struct ieee80211vap *vap)
{
vap->iv_newstate = adhoc_newstate;
vap->iv_input = adhoc_input;
if (vap->iv_opmode == IEEE80211_M_IBSS)
vap->iv_recv_mgmt = adhoc_recv_mgmt;
else
vap->iv_recv_mgmt = ahdemo_recv_mgmt;
vap->iv_recv_ctl = adhoc_recv_ctl;
vap->iv_opdetach = adhoc_vdetach;
#ifdef IEEE80211_SUPPORT_TDMA
/*
* Throw control to tdma support. Note we do this
* after setting up our callbacks so it can piggyback
* on top of us.
*/
if (vap->iv_caps & IEEE80211_C_TDMA)
ieee80211_tdma_vattach(vap);
#endif
}
static void
sta_leave(void *arg, struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
if (ni != vap->iv_bss)
ieee80211_node_leave(ni);
}
/*
* IEEE80211_M_IBSS+IEEE80211_M_AHDEMO vap state machine handler.
*/
static int
adhoc_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
enum ieee80211_state ostate;
IEEE80211_LOCK_ASSERT(vap->iv_ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
vap->iv_state = nstate; /* state transition */
if (ostate != IEEE80211_S_SCAN)
ieee80211_cancel_scan(vap); /* background scan */
ni = vap->iv_bss; /* NB: no reference held */
switch (nstate) {
case IEEE80211_S_INIT:
switch (ostate) {
case IEEE80211_S_SCAN:
ieee80211_cancel_scan(vap);
break;
default:
break;
}
if (ostate != IEEE80211_S_INIT) {
/* NB: optimize INIT -> INIT case */
ieee80211_reset_bss(vap);
}
break;
case IEEE80211_S_SCAN:
switch (ostate) {
case IEEE80211_S_RUN: /* beacon miss */
/* purge station table; entries are stale */
ieee80211_iterate_nodes_vap(&ic->ic_sta, vap,
sta_leave, NULL);
/* fall thru... */
case IEEE80211_S_INIT:
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC &&
!IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) {
/*
* Already have a channel; bypass the
* scan and startup immediately.
*/
ieee80211_create_ibss(vap,
ieee80211_ht_adjust_channel(ic,
vap->iv_des_chan, vap->iv_flags_ht));
break;
}
/*
* Initiate a scan. We can come here as a result
* of an IEEE80211_IOC_SCAN_REQ too in which case
* the vap will be marked with IEEE80211_FEXT_SCANREQ
* and the scan request parameters will be present
* in iv_scanreq. Otherwise we do the default.
*/
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
ieee80211_check_scan(vap,
vap->iv_scanreq_flags,
vap->iv_scanreq_duration,
vap->iv_scanreq_mindwell,
vap->iv_scanreq_maxdwell,
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
} else
ieee80211_check_scan_current(vap);
break;
case IEEE80211_S_SCAN:
/*
* This can happen because of a change in state
* that requires a reset. Trigger a new scan
* unless we're in manual roaming mode in which
* case an application must issue an explicit request.
*/
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
ieee80211_check_scan_current(vap);
break;
default:
goto invalid;
}
break;
case IEEE80211_S_RUN:
if (vap->iv_flags & IEEE80211_F_WPA) {
/* XXX validate prerequisites */
}
switch (ostate) {
case IEEE80211_S_INIT:
/*
* Already have a channel; bypass the
* scan and startup immediately.
* Note that ieee80211_create_ibss will call
* back to do a RUN->RUN state change.
*/
ieee80211_create_ibss(vap,
ieee80211_ht_adjust_channel(ic,
ic->ic_curchan, vap->iv_flags_ht));
/* NB: iv_bss is changed on return */
ni = vap->iv_bss;
break;
case IEEE80211_S_SCAN:
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_debug(vap)) {
ieee80211_note(vap,
"synchronized with %s ssid ",
ether_sprintf(ni->ni_bssid));
ieee80211_print_essid(vap->iv_bss->ni_essid,
ni->ni_esslen);
/* XXX MCS/HT */
printf(" channel %d start %uMb\n",
ieee80211_chan2ieee(ic, ic->ic_curchan),
IEEE80211_RATE2MBS(ni->ni_txrate));
}
#endif
break;
case IEEE80211_S_RUN: /* IBSS merge */
break;
default:
goto invalid;
}
/*
* When 802.1x is not in use mark the port authorized
* at this point so traffic can flow.
*/
if (ni->ni_authmode != IEEE80211_AUTH_8021X)
ieee80211_node_authorize(ni);
/*
* Fake association when joining an existing bss.
*/
if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, vap->iv_myaddr) &&
ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, ostate != IEEE80211_S_RUN);
break;
case IEEE80211_S_SLEEP:
vap->iv_sta_ps(vap, 0);
break;
default:
invalid:
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
"%s: unexpected state transition %s -> %s\n", __func__,
ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
break;
}
return 0;
}
/*
* Decide if a received management frame should be
* printed when debugging is enabled. This filters some
* of the less interesting frames that come frequently
* (e.g. beacons).
*/
static __inline int
doprint(struct ieee80211vap *vap, int subtype)
{
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BEACON:
return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN);
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
return 1;
}
return 1;
}
/*
* Process a received frame. The node associated with the sender
* should be supplied. If nothing was found in the node table then
* the caller is assumed to supply a reference to iv_bss instead.
* The RSSI and a timestamp are also supplied. The RSSI data is used
* during AP scanning to select a AP to associate with; it can have
* any units so long as values have consistent units and higher values
* mean ``better signal''. The receive timestamp is currently not used
* by the 802.11 layer.
*/
static int
adhoc_input(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_rx_stats *rxs, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = vap->iv_ifp;
struct ieee80211_frame *wh;
struct ieee80211_key *key;
struct ether_header *eh;
int hdrspace, need_tap = 1; /* mbuf need to be tapped. */
uint8_t dir, type, subtype, qos;
uint8_t *bssid;
int is_hw_decrypted = 0;
int has_decrypted = 0;
/*
* Some devices do hardware decryption all the way through
* to pretending the frame wasn't encrypted in the first place.
* So, tag it appropriately so it isn't discarded inappropriately.
*/
if ((rxs != NULL) && (rxs->c_pktflags & IEEE80211_RX_F_DECRYPTED))
is_hw_decrypted = 1;
if (m->m_flags & M_AMPDU_MPDU) {
/*
* Fastpath for A-MPDU reorder q resubmission. Frames
* w/ M_AMPDU_MPDU marked have already passed through
* here but were received out of order and been held on
* the reorder queue. When resubmitted they are marked
* with the M_AMPDU_MPDU flag and we can bypass most of
* the normal processing.
*/
wh = mtod(m, struct ieee80211_frame *);
type = IEEE80211_FC0_TYPE_DATA;
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
subtype = IEEE80211_FC0_SUBTYPE_QOS;
hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */
goto resubmit_ampdu;
}
KASSERT(ni != NULL, ("null node"));
ni->ni_inact = ni->ni_inact_reload;
type = -1; /* undefined */
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"too short (1): len %u", m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
/*
* Bit of a cheat here, we use a pointer for a 3-address
* frame format but don't reference fields past outside
* ieee80211_frame_min w/o first validating the data is
* present.
*/
wh = mtod(m, struct ieee80211_frame *);
if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) !=
IEEE80211_FC0_VERSION_0) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x",
wh->i_fc[0], wh->i_fc[1]);
vap->iv_stats.is_rx_badversion++;
goto err;
}
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) {
if (dir != IEEE80211_FC1_DIR_NODS)
bssid = wh->i_addr1;
else if (type == IEEE80211_FC0_TYPE_CTL)
bssid = wh->i_addr1;
else {
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
IEEE80211_DISCARD_MAC(vap,
IEEE80211_MSG_ANY, ni->ni_macaddr,
NULL, "too short (2): len %u",
m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
bssid = wh->i_addr3;
}
/*
* Validate the bssid.
*/
if (!(type == IEEE80211_FC0_TYPE_MGT &&
(subtype == IEEE80211_FC0_SUBTYPE_BEACON ||
subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)) &&
!IEEE80211_ADDR_EQ(bssid, vap->iv_bss->ni_bssid) &&
!IEEE80211_ADDR_EQ(bssid, ifp->if_broadcastaddr)) {
/* not interested in */
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
bssid, NULL, "%s", "not to bss");
vap->iv_stats.is_rx_wrongbss++;
goto out;
}
/*
* Data frame, cons up a node when it doesn't
* exist. This should probably done after an ACL check.
*/
if (type == IEEE80211_FC0_TYPE_DATA &&
ni == vap->iv_bss &&
!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
/*
* Beware of frames that come in too early; we
* can receive broadcast frames and creating sta
* entries will blow up because there is no bss
* channel yet.
*/
if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "not in RUN state (%s)",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_badstate++;
goto err;
}
/*
* Fake up a node for this newly discovered member
* of the IBSS.
*
* Note: This doesn't "upgrade" the node to 11n;
* that will happen after a probe request/response
* exchange.
*/
ni = ieee80211_fakeup_adhoc_node(vap, wh->i_addr2);
if (ni == NULL) {
/* NB: stat kept for alloc failure */
goto err;
}
}
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
ni->ni_noise = nf;
if (IEEE80211_HAS_SEQ(type, subtype) &&
IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
uint8_t tid = ieee80211_gettid(wh);
if (IEEE80211_QOS_HAS_SEQ(wh) &&
TID_TO_WME_AC(tid) >= WME_AC_VI)
ic->ic_wme.wme_hipri_traffic++;
if (! ieee80211_check_rxseq(ni, wh, bssid, rxs))
goto out;
}
}
switch (type) {
case IEEE80211_FC0_TYPE_DATA:
hdrspace = ieee80211_hdrspace(ic, wh);
if (m->m_len < hdrspace &&
(m = m_pullup(m, hdrspace)) == NULL) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, NULL,
"data too short: expecting %u", hdrspace);
vap->iv_stats.is_rx_tooshort++;
goto out; /* XXX */
}
if (dir != IEEE80211_FC1_DIR_NODS) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto out;
}
/* XXX no power-save support */
/*
* Handle A-MPDU re-ordering. If the frame is to be
* processed directly then ieee80211_ampdu_reorder
* will return 0; otherwise it has consumed the mbuf
* and we should do nothing more with it.
*/
if ((m->m_flags & M_AMPDU) &&
ieee80211_ampdu_reorder(ni, m, rxs) != 0) {
m = NULL;
goto out;
}
resubmit_ampdu:
/*
* Handle privacy requirements. Note that we
* must not be preempted from here until after
* we (potentially) call ieee80211_crypto_demic;
* otherwise we may violate assumptions in the
* crypto cipher modules used to do delayed update
* of replay sequence numbers.
*/
if (is_hw_decrypted || wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) {
/*
* Discard encrypted frames when privacy is off.
*/
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "WEP", "%s", "PRIVACY off");
vap->iv_stats.is_rx_noprivacy++;
IEEE80211_NODE_STAT(ni, rx_noprivacy);
goto out;
}
if (ieee80211_crypto_decap(ni, m, hdrspace, &key) == 0) {
/* NB: stats+msgs handled in crypto_decap */
IEEE80211_NODE_STAT(ni, rx_wepfail);
goto out;
}
wh = mtod(m, struct ieee80211_frame *);
wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
has_decrypted = 1;
} else {
/* XXX M_WEP and IEEE80211_F_PRIVACY */
key = NULL;
}
/*
* Save QoS bits for use below--before we strip the header.
*/
if (subtype == IEEE80211_FC0_SUBTYPE_QOS)
qos = ieee80211_getqos(wh)[0];
else
qos = 0;
/*
* Next up, any fragmentation.
*/
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
m = ieee80211_defrag(ni, m, hdrspace);
if (m == NULL) {
/* Fragment dropped or frame not complete yet */
goto out;
}
}
wh = NULL; /* no longer valid, catch any uses */
/*
* Next strip any MSDU crypto bits.
*/
if (!ieee80211_crypto_demic(vap, key, m, 0)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
ni->ni_macaddr, "data", "%s", "demic error");
vap->iv_stats.is_rx_demicfail++;
IEEE80211_NODE_STAT(ni, rx_demicfail);
goto out;
}
/* copy to listener after decrypt */
if (ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
need_tap = 0;
/*
* Finally, strip the 802.11 header.
*/
m = ieee80211_decap(vap, m, hdrspace);
if (m == NULL) {
/* XXX mask bit to check for both */
/* don't count Null data frames as errors */
if (subtype == IEEE80211_FC0_SUBTYPE_NODATA ||
subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL)
goto out;
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
ni->ni_macaddr, "data", "%s", "decap error");
vap->iv_stats.is_rx_decap++;
IEEE80211_NODE_STAT(ni, rx_decap);
goto err;
}
eh = mtod(m, struct ether_header *);
if (!ieee80211_node_is_authorized(ni)) {
/*
* Deny any non-PAE frames received prior to
* authorization. For open/shared-key
* authentication the port is mark authorized
* after authentication completes. For 802.1x
* the port is not marked authorized by the
* authenticator until the handshake has completed.
*/
if (eh->ether_type != htons(ETHERTYPE_PAE)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
eh->ether_shost, "data",
"unauthorized port: ether type 0x%x len %u",
eh->ether_type, m->m_pkthdr.len);
vap->iv_stats.is_rx_unauth++;
IEEE80211_NODE_STAT(ni, rx_unauth);
goto err;
}
} else {
/*
* When denying unencrypted frames, discard
* any non-PAE frames received without encryption.
*/
if ((vap->iv_flags & IEEE80211_F_DROPUNENC) &&
((has_decrypted == 0) && (m->m_flags & M_WEP) == 0) &&
(is_hw_decrypted == 0) &&
eh->ether_type != htons(ETHERTYPE_PAE)) {
/*
* Drop unencrypted frames.
*/
vap->iv_stats.is_rx_unencrypted++;
IEEE80211_NODE_STAT(ni, rx_unencrypted);
goto out;
}
}
/* XXX require HT? */
if (qos & IEEE80211_QOS_AMSDU) {
m = ieee80211_decap_amsdu(ni, m);
if (m == NULL)
return IEEE80211_FC0_TYPE_DATA;
} else {
#ifdef IEEE80211_SUPPORT_SUPERG
m = ieee80211_decap_fastframe(vap, ni, m);
if (m == NULL)
return IEEE80211_FC0_TYPE_DATA;
#endif
}
if (dir == IEEE80211_FC1_DIR_DSTODS && ni->ni_wdsvap != NULL)
ieee80211_deliver_data(ni->ni_wdsvap, ni, m);
else
ieee80211_deliver_data(vap, ni, m);
return IEEE80211_FC0_TYPE_DATA;
case IEEE80211_FC0_TYPE_MGT:
vap->iv_stats.is_rx_mgmt++;
IEEE80211_NODE_STAT(ni, rx_mgmt);
if (dir != IEEE80211_FC1_DIR_NODS) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, "data", "incorrect dir 0x%x", dir);
vap->iv_stats.is_rx_wrongdir++;
goto err;
}
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
ni->ni_macaddr, "mgt", "too short: len %u",
m->m_pkthdr.len);
vap->iv_stats.is_rx_tooshort++;
goto out;
}
#ifdef IEEE80211_DEBUG
if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) ||
ieee80211_msg_dumppkts(vap)) {
if_printf(ifp, "received %s from %s rssi %d\n",
ieee80211_mgt_subtype_name(subtype),
ether_sprintf(wh->i_addr2), rssi);
}
#endif
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "WEP set but not permitted");
vap->iv_stats.is_rx_mgtdiscard++; /* XXX */
goto out;
}
vap->iv_recv_mgmt(ni, m, subtype, rxs, rssi, nf);
goto out;
case IEEE80211_FC0_TYPE_CTL:
vap->iv_stats.is_rx_ctl++;
IEEE80211_NODE_STAT(ni, rx_ctrl);
vap->iv_recv_ctl(ni, m, subtype);
goto out;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "bad", "frame type 0x%x", type);
/* should not come here */
break;
}
err:
if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
out:
if (m != NULL) {
if (need_tap && ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_rx(vap, m);
m_freem(m);
}
return type;
}
static int
is11bclient(const uint8_t *rates, const uint8_t *xrates)
{
static const uint32_t brates = (1<<2*1)|(1<<2*2)|(1<<11)|(1<<2*11);
int i;
/* NB: the 11b clients we care about will not have xrates */
if (xrates != NULL || rates == NULL)
return 0;
for (i = 0; i < rates[1]; i++) {
int r = rates[2+i] & IEEE80211_RATE_VAL;
if (r > 2*11 || ((1<<r) & brates) == 0)
return 0;
}
return 1;
}
static void
adhoc_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0,
int subtype, const struct ieee80211_rx_stats *rxs, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_channel *rxchan = ic->ic_curchan;
struct ieee80211_frame *wh;
uint8_t *frm, *efrm;
uint8_t *ssid, *rates, *xrates;
#if 0
int ht_state_change = 0;
#endif
wh = mtod(m0, struct ieee80211_frame *);
frm = (uint8_t *)&wh[1];
efrm = mtod(m0, uint8_t *) + m0->m_len;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_DEBUG,
"%s: recv mgmt frame, addr2=%6D, ni=%p (%6D) fc=%.02x %.02x\n",
__func__,
wh->i_addr2, ":",
ni,
ni->ni_macaddr, ":",
wh->i_fc[0],
wh->i_fc[1]);
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
case IEEE80211_FC0_SUBTYPE_BEACON: {
struct ieee80211_scanparams scan;
struct ieee80211_channel *c;
/*
* We process beacon/probe response
* frames to discover neighbors.
*/
if (rxs != NULL) {
c = ieee80211_lookup_channel_rxstatus(vap, rxs);
if (c != NULL)
rxchan = c;
}
if (ieee80211_parse_beacon(ni, m0, rxchan, &scan) != 0)
return;
/*
* Count frame now that we know it's to be processed.
*/
if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) {
vap->iv_stats.is_rx_beacon++; /* XXX remove */
IEEE80211_NODE_STAT(ni, rx_beacons);
} else
IEEE80211_NODE_STAT(ni, rx_proberesp);
/*
* If scanning, just pass information to the scan module.
*/
if (ic->ic_flags & IEEE80211_F_SCAN) {
if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) {
/*
* Actively scanning a channel marked passive;
* send a probe request now that we know there
* is 802.11 traffic present.
*
* XXX check if the beacon we recv'd gives
* us what we need and suppress the probe req
*/
ieee80211_probe_curchan(vap, 1);
ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN;
}
ieee80211_add_scan(vap, rxchan, &scan, wh,
subtype, rssi, nf);
return;
}
if (scan.capinfo & IEEE80211_CAPINFO_IBSS) {
if (!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
/*
* Create a new entry in the neighbor table.
*
* XXX TODO:
*
* Here we're not scanning; so if we have an
* SSID then make sure it matches our SSID.
* Otherwise this code will match on all IBSS
* beacons/probe requests for all SSIDs,
* filling the node table with nodes that
* aren't ours.
*/
if (ieee80211_ibss_node_check_new(ni, &scan)) {
ni = ieee80211_add_neighbor(vap, wh, &scan);
/*
* Send a probe request so we announce 11n
* capabilities.
*/
ieee80211_send_probereq(ni, /* node */
vap->iv_myaddr, /* SA */
ni->ni_macaddr, /* DA */
vap->iv_bss->ni_bssid, /* BSSID */
vap->iv_bss->ni_essid,
vap->iv_bss->ni_esslen); /* SSID */
} else
ni = NULL;
/*
* Send a probe request so we announce 11n
* capabilities.
*
* Don't do this if we're scanning.
*/
if (! (ic->ic_flags & IEEE80211_F_SCAN))
ieee80211_send_probereq(ni, /* node */
vap->iv_myaddr, /* SA */
ni->ni_macaddr, /* DA */
vap->iv_bss->ni_bssid, /* BSSID */
vap->iv_bss->ni_essid,
vap->iv_bss->ni_esslen); /* SSID */
} else if (ni->ni_capinfo == 0) {
/*
* Update faked node created on transmit.
* Note this also updates the tsf.
*/
ieee80211_init_neighbor(ni, wh, &scan);
/*
* Send a probe request so we announce 11n
* capabilities.
*/
ieee80211_send_probereq(ni, /* node */
vap->iv_myaddr, /* SA */
ni->ni_macaddr, /* DA */
vap->iv_bss->ni_bssid, /* BSSID */
vap->iv_bss->ni_essid,
vap->iv_bss->ni_esslen); /* SSID */
} else {
/*
* Record tsf for potential resync.
*/
memcpy(ni->ni_tstamp.data, scan.tstamp,
sizeof(ni->ni_tstamp));
}
/*
* This isn't enabled yet - otherwise it would
* update the HT parameters and channel width
* from any node, which could lead to lots of
* strange behaviour if the 11n nodes aren't
* exactly configured to match.
*/
#if 0
if (scan.htcap != NULL && scan.htinfo != NULL &&
(vap->iv_flags_ht & IEEE80211_FHT_HT)) {
ieee80211_ht_updateparams(ni,
scan.htcap, scan.htinfo));
if (ieee80211_ht_updateparams_final(ni,
scan.htcap, scan.htinfo))
ht_state_change = 1;
}
/* XXX same for VHT? */
#endif
if (ni != NULL) {
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
ni->ni_noise = nf;
}
/*
* Same here - the channel width change should
* be applied to the specific peer node, not
* to the ic. Ie, the interface configuration
* should stay in its current channel width;
* but it should change the rate control and
* any queued frames for the given node only.
*
* Since there's no (current) way to inform
* the driver that a channel width change has
* occurred for a single node, just stub this
* out.
*/
#if 0
if (ht_state_change)
ieee80211_update_chw(ic);
#endif
}
break;
}
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "wrong state %s",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_mgtdiscard++;
return;
}
if (IEEE80211_IS_MULTICAST(wh->i_addr2)) {
/* frame must be directed */
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not unicast");
vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */
return;
}
/*
* prreq frame format
* [tlv] ssid
* [tlv] supported rates
* [tlv] extended supported rates
*/
ssid = rates = xrates = NULL;
while (efrm - frm > 1) {
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return);
switch (*frm) {
case IEEE80211_ELEMID_SSID:
ssid = frm;
break;
case IEEE80211_ELEMID_RATES:
rates = frm;
break;
case IEEE80211_ELEMID_XRATES:
xrates = frm;
break;
}
frm += frm[1] + 2;
}
IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return);
if (xrates != NULL)
IEEE80211_VERIFY_ELEMENT(xrates,
IEEE80211_RATE_MAXSIZE - rates[1], return);
IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return);
IEEE80211_VERIFY_SSID(vap->iv_bss, ssid, return);
if ((vap->iv_flags & IEEE80211_F_HIDESSID) && ssid[1] == 0) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL,
"%s", "no ssid with ssid suppression enabled");
vap->iv_stats.is_rx_ssidmismatch++; /*XXX*/
return;
}
/* XXX find a better class or define it's own */
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2,
"%s", "recv probe req");
/*
* Some legacy 11b clients cannot hack a complete
* probe response frame. When the request includes
* only a bare-bones rate set, communicate this to
* the transmit side.
*/
ieee80211_send_proberesp(vap, wh->i_addr2,
is11bclient(rates, xrates) ? IEEE80211_SEND_LEGACY_11B : 0);
/*
* Note: we don't benefit from stashing the probe request
* IEs away to use for IBSS negotiation, because we
* typically don't get all of the IEs.
*/
break;
case IEEE80211_FC0_SUBTYPE_ACTION:
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
if ((ni == vap->iv_bss) &&
!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "unknown node");
vap->iv_stats.is_rx_mgtdiscard++;
} else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) &&
!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_DEBUG,
wh, NULL, "%s", "not for us");
vap->iv_stats.is_rx_mgtdiscard++;
} else if (vap->iv_state != IEEE80211_S_RUN) {
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_DEBUG,
wh, NULL, "wrong state %s",
ieee80211_state_name[vap->iv_state]);
vap->iv_stats.is_rx_mgtdiscard++;
} else {
if (ieee80211_parse_action(ni, m0) == 0)
(void)ic->ic_recv_action(ni, wh, frm, efrm);
}
break;
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_TIMING_ADV:
case IEEE80211_FC0_SUBTYPE_ATIM:
case IEEE80211_FC0_SUBTYPE_DISASSOC:
case IEEE80211_FC0_SUBTYPE_AUTH:
case IEEE80211_FC0_SUBTYPE_DEAUTH:
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not handled");
vap->iv_stats.is_rx_mgtdiscard++;
break;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "mgt", "subtype 0x%x not handled", subtype);
vap->iv_stats.is_rx_badsubtype++;
break;
}
}
#undef IEEE80211_VERIFY_LENGTH
#undef IEEE80211_VERIFY_ELEMENT
static void
ahdemo_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0,
int subtype, const struct ieee80211_rx_stats *rxs, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_frame *wh;
/*
* Process management frames when scanning; useful for doing
* a site-survey.
*/
if (ic->ic_flags & IEEE80211_F_SCAN)
adhoc_recv_mgmt(ni, m0, subtype, rxs, rssi, nf);
else {
wh = mtod(m0, struct ieee80211_frame *);
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
case IEEE80211_FC0_SUBTYPE_TIMING_ADV:
case IEEE80211_FC0_SUBTYPE_BEACON:
case IEEE80211_FC0_SUBTYPE_ATIM:
case IEEE80211_FC0_SUBTYPE_DISASSOC:
case IEEE80211_FC0_SUBTYPE_AUTH:
case IEEE80211_FC0_SUBTYPE_DEAUTH:
case IEEE80211_FC0_SUBTYPE_ACTION:
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
wh, NULL, "%s", "not handled");
vap->iv_stats.is_rx_mgtdiscard++;
break;
default:
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
wh, "mgt", "subtype 0x%x not handled", subtype);
vap->iv_stats.is_rx_badsubtype++;
break;
}
}
}
static void
adhoc_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype)
{
switch (subtype) {
case IEEE80211_FC0_SUBTYPE_BAR:
ieee80211_recv_bar(ni, m);
break;
}
}
Reference in New Issue View Git Blame Copy Permalink