freebsd-skq/sys/mips/mediatek/mtk_pinctrl.c
Oleksandr Tymoshenko 217d17bcd3 Clean up OF_getprop_alloc API
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.

For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.

Reviewed by:	ian, manu
Differential Revision:	https://reviews.freebsd.org/D14850
2018-04-08 22:59:34 +00:00

241 lines
5.9 KiB
C

/*-
* Copyright (c) 2016 Stanislav Galabov
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/fdt/fdt_pinctrl.h>
#include <mips/mediatek/mtk_sysctl.h>
#include <mips/mediatek/mtk_soc.h>
#include <mips/mediatek/mtk_pinctrl.h>
#include "fdt_pinctrl_if.h"
static const struct ofw_compat_data compat_data[] = {
{ "ralink,rt2880-pinmux", 1 },
/* Sentinel */
{ NULL, 0 }
};
static int
mtk_pinctrl_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
return (ENXIO);
device_set_desc(dev, "MTK Pin Controller");
return (0);
}
static int
mtk_pinctrl_attach(device_t dev)
{
if (device_get_unit(dev) != 0) {
device_printf(dev, "Only one pin control allowed\n");
return (ENXIO);
}
if (bootverbose)
device_printf(dev, "GPIO mode start: 0x%08x\n",
mtk_sysctl_get(SYSCTL_GPIOMODE));
fdt_pinctrl_register(dev, NULL);
fdt_pinctrl_configure_tree(dev);
if (bootverbose)
device_printf(dev, "GPIO mode end : 0x%08x\n",
mtk_sysctl_get(SYSCTL_GPIOMODE));
return (0);
}
static int
mtk_pinctrl_process_entry(device_t dev, struct mtk_pin_group *table,
const char *group, char *func)
{
uint32_t val;
int found = 0, i, j;
for (i = 0; table[i].name != NULL; i++) {
if (strcmp(table[i].name, group) == 0) {
found = 1;
break;
}
}
if (!found)
return (ENOENT);
for (j = 0; j < table[i].funcnum; j++) {
if (strcmp(table[i].functions[j].name, func) == 0) {
val = mtk_sysctl_get(table[i].sysc_reg);
val &= ~(table[i].mask << table[i].offset);
val |= (table[i].functions[j].value << table[i].offset);
mtk_sysctl_set(table[i].sysc_reg, val);
return (0);
}
}
return (ENOENT);
}
static int
mtk_pinctrl_process_node(device_t dev, struct mtk_pin_group *table,
phandle_t node)
{
const char **group_list = NULL;
char *pin_function = NULL;
int ret, num_groups, i;
ret = 0;
num_groups = ofw_bus_string_list_to_array(node, "ralink,group",
&group_list);
if (num_groups <= 0)
return (ENOENT);
if (OF_getprop_alloc_multi(node, "ralink,function", sizeof(*pin_function),
(void **)&pin_function) == -1) {
ret = ENOENT;
goto out;
}
for (i = 0; i < num_groups; i++) {
if ((ret = mtk_pinctrl_process_entry(dev, table, group_list[i],
pin_function)) != 0)
goto out;
}
out:
OF_prop_free(group_list);
OF_prop_free(pin_function);
return (ret);
}
static int
mtk_pinctrl_configure(device_t dev, phandle_t cfgxref)
{
struct mtk_pin_group *pintable;
phandle_t node, child;
uint32_t socid;
int ret;
node = OF_node_from_xref(cfgxref);
ret = 0;
/* Now, get the system type, so we can get the proper GPIO mode array */
socid = mtk_soc_get_socid();
switch (socid) {
case MTK_SOC_RT2880:
pintable = rt2880_pintable;
break;
case MTK_SOC_RT3050: /* fallthrough */
case MTK_SOC_RT3052:
case MTK_SOC_RT3350:
pintable = rt3050_pintable;
break;
case MTK_SOC_RT3352:
pintable = rt3352_pintable;
break;
case MTK_SOC_RT3662: /* fallthrough */
case MTK_SOC_RT3883:
pintable = rt3883_pintable;
break;
case MTK_SOC_RT5350:
pintable = rt5350_pintable;
break;
case MTK_SOC_MT7620A: /* fallthrough */
case MTK_SOC_MT7620N:
pintable = mt7620_pintable;
break;
case MTK_SOC_MT7628: /* fallthrough */
case MTK_SOC_MT7688:
pintable = mt7628_pintable;
break;
case MTK_SOC_MT7621:
pintable = mt7621_pintable;
break;
default:
ret = ENOENT;
goto out;
}
/*
* OpenWRT dts files have single child within the pinctrl nodes, which
* contains the 'ralink,group' and 'ralink,function' properties.
*/
for (child = OF_child(node); child != 0 && child != -1;
child = OF_peer(child)) {
if ((ret = mtk_pinctrl_process_node(dev, pintable, child)) != 0)
return (ret);
}
out:
return (ret);
}
static device_method_t mtk_pinctrl_methods[] = {
DEVMETHOD(device_probe, mtk_pinctrl_probe),
DEVMETHOD(device_attach, mtk_pinctrl_attach),
/* fdt_pinctrl interface */
DEVMETHOD(fdt_pinctrl_configure, mtk_pinctrl_configure),
DEVMETHOD_END
};
static driver_t mtk_pinctrl_driver = {
"pinctrl",
mtk_pinctrl_methods,
0,
};
static devclass_t mtk_pinctrl_devclass;
EARLY_DRIVER_MODULE(mtk_pinctrl, simplebus, mtk_pinctrl_driver,
mtk_pinctrl_devclass, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_EARLY);
MODULE_DEPEND(mtk_pinctrl, mtk_sysctl, 1, 1, 1);