f5866522ce
Submitted by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
1283 lines
40 KiB
C
1283 lines
40 KiB
C
/*-
|
|
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/module.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/sema.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <vm/uma.h>
|
|
#include <machine/stdarg.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-pci.h>
|
|
#include <ata_if.h>
|
|
|
|
/* local prototypes */
|
|
static int ata_promise_chipinit(device_t dev);
|
|
static int ata_promise_ch_attach(device_t dev);
|
|
static int ata_promise_status(device_t dev);
|
|
static int ata_promise_dmastart(struct ata_request *request);
|
|
static int ata_promise_dmastop(struct ata_request *request);
|
|
static void ata_promise_dmareset(device_t dev);
|
|
static int ata_promise_setmode(device_t dev, int target, int mode);
|
|
static int ata_promise_tx2_ch_attach(device_t dev);
|
|
static int ata_promise_tx2_status(device_t dev);
|
|
static int ata_promise_mio_ch_attach(device_t dev);
|
|
static int ata_promise_mio_ch_detach(device_t dev);
|
|
static void ata_promise_mio_intr(void *data);
|
|
static int ata_promise_mio_status(device_t dev);
|
|
static int ata_promise_mio_command(struct ata_request *request);
|
|
static void ata_promise_mio_reset(device_t dev);
|
|
static int ata_promise_mio_pm_read(device_t dev, int port, int reg, u_int32_t *result);
|
|
static int ata_promise_mio_pm_write(device_t dev, int port, int reg, u_int32_t result);
|
|
static u_int32_t ata_promise_mio_softreset(device_t dev, int port);
|
|
static void ata_promise_mio_dmainit(device_t dev);
|
|
static void ata_promise_mio_setprd(void *xsc, bus_dma_segment_t *segs, int nsegs, int error);
|
|
static int ata_promise_mio_setmode(device_t dev, int target, int mode);
|
|
static int ata_promise_mio_getrev(device_t dev, int target);
|
|
static void ata_promise_sx4_intr(void *data);
|
|
static int ata_promise_sx4_command(struct ata_request *request);
|
|
static int ata_promise_apkt(u_int8_t *bytep, struct ata_request *request);
|
|
static void ata_promise_queue_hpkt(struct ata_pci_controller *ctlr, u_int32_t hpkt);
|
|
static void ata_promise_next_hpkt(struct ata_pci_controller *ctlr);
|
|
|
|
/* misc defines */
|
|
#define PR_OLD 0
|
|
#define PR_NEW 1
|
|
#define PR_TX 2
|
|
#define PR_MIO 3
|
|
#define PR_TX4 0x01
|
|
#define PR_SX4X 0x02
|
|
#define PR_SX6K 0x04
|
|
#define PR_PATA 0x08
|
|
#define PR_CMBO 0x10
|
|
#define PR_CMBO2 0x20
|
|
#define PR_SATA 0x40
|
|
#define PR_SATA2 0x80
|
|
|
|
/*
|
|
* Promise chipset support functions
|
|
*/
|
|
#define ATA_PDC_APKT_OFFSET 0x00000010
|
|
#define ATA_PDC_HPKT_OFFSET 0x00000040
|
|
#define ATA_PDC_ASG_OFFSET 0x00000080
|
|
#define ATA_PDC_LSG_OFFSET 0x000000c0
|
|
#define ATA_PDC_HSG_OFFSET 0x00000100
|
|
#define ATA_PDC_CHN_OFFSET 0x00000400
|
|
#define ATA_PDC_BUF_BASE 0x00400000
|
|
#define ATA_PDC_BUF_OFFSET 0x00100000
|
|
#define ATA_PDC_MAX_HPKT 8
|
|
#define ATA_PDC_WRITE_REG 0x00
|
|
#define ATA_PDC_WRITE_CTL 0x0e
|
|
#define ATA_PDC_WRITE_END 0x08
|
|
#define ATA_PDC_WAIT_NBUSY 0x10
|
|
#define ATA_PDC_WAIT_READY 0x18
|
|
#define ATA_PDC_1B 0x20
|
|
#define ATA_PDC_2B 0x40
|
|
|
|
struct host_packet {
|
|
u_int32_t addr;
|
|
TAILQ_ENTRY(host_packet) chain;
|
|
};
|
|
|
|
struct ata_promise_sx4 {
|
|
struct mtx mtx;
|
|
TAILQ_HEAD(, host_packet) queue;
|
|
int busy;
|
|
};
|
|
|
|
static int
|
|
ata_promise_probe(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(dev);
|
|
const struct ata_chip_id *idx;
|
|
static const struct ata_chip_id ids[] =
|
|
{{ ATA_PDC20246, 0, PR_OLD, 0x00, ATA_UDMA2, "PDC20246" },
|
|
{ ATA_PDC20262, 0, PR_NEW, 0x00, ATA_UDMA4, "PDC20262" },
|
|
{ ATA_PDC20263, 0, PR_NEW, 0x00, ATA_UDMA4, "PDC20263" },
|
|
{ ATA_PDC20265, 0, PR_NEW, 0x00, ATA_UDMA5, "PDC20265" },
|
|
{ ATA_PDC20267, 0, PR_NEW, 0x00, ATA_UDMA5, "PDC20267" },
|
|
{ ATA_PDC20268, 0, PR_TX, PR_TX4, ATA_UDMA5, "PDC20268" },
|
|
{ ATA_PDC20269, 0, PR_TX, 0x00, ATA_UDMA6, "PDC20269" },
|
|
{ ATA_PDC20270, 0, PR_TX, PR_TX4, ATA_UDMA5, "PDC20270" },
|
|
{ ATA_PDC20271, 0, PR_TX, 0x00, ATA_UDMA6, "PDC20271" },
|
|
{ ATA_PDC20275, 0, PR_TX, 0x00, ATA_UDMA6, "PDC20275" },
|
|
{ ATA_PDC20276, 0, PR_TX, PR_SX6K, ATA_UDMA6, "PDC20276" },
|
|
{ ATA_PDC20277, 0, PR_TX, 0x00, ATA_UDMA6, "PDC20277" },
|
|
{ ATA_PDC20318, 0, PR_MIO, PR_SATA, ATA_SA150, "PDC20318" },
|
|
{ ATA_PDC20319, 0, PR_MIO, PR_SATA, ATA_SA150, "PDC20319" },
|
|
{ ATA_PDC20371, 0, PR_MIO, PR_CMBO, ATA_SA150, "PDC20371" },
|
|
{ ATA_PDC20375, 0, PR_MIO, PR_CMBO, ATA_SA150, "PDC20375" },
|
|
{ ATA_PDC20376, 0, PR_MIO, PR_CMBO, ATA_SA150, "PDC20376" },
|
|
{ ATA_PDC20377, 0, PR_MIO, PR_CMBO, ATA_SA150, "PDC20377" },
|
|
{ ATA_PDC20378, 0, PR_MIO, PR_CMBO, ATA_SA150, "PDC20378" },
|
|
{ ATA_PDC20379, 0, PR_MIO, PR_CMBO, ATA_SA150, "PDC20379" },
|
|
{ ATA_PDC20571, 0, PR_MIO, PR_CMBO2, ATA_SA150, "PDC20571" },
|
|
{ ATA_PDC20575, 0, PR_MIO, PR_CMBO2, ATA_SA150, "PDC20575" },
|
|
{ ATA_PDC20579, 0, PR_MIO, PR_CMBO2, ATA_SA150, "PDC20579" },
|
|
{ ATA_PDC20771, 0, PR_MIO, PR_CMBO2, ATA_SA300, "PDC20771" },
|
|
{ ATA_PDC40775, 0, PR_MIO, PR_CMBO2, ATA_SA300, "PDC40775" },
|
|
{ ATA_PDC20617, 0, PR_MIO, PR_PATA, ATA_UDMA6, "PDC20617" },
|
|
{ ATA_PDC20618, 0, PR_MIO, PR_PATA, ATA_UDMA6, "PDC20618" },
|
|
{ ATA_PDC20619, 0, PR_MIO, PR_PATA, ATA_UDMA6, "PDC20619" },
|
|
{ ATA_PDC20620, 0, PR_MIO, PR_PATA, ATA_UDMA6, "PDC20620" },
|
|
{ ATA_PDC20621, 0, PR_MIO, PR_SX4X, ATA_UDMA5, "PDC20621" },
|
|
{ ATA_PDC20622, 0, PR_MIO, PR_SX4X, ATA_SA150, "PDC20622" },
|
|
{ ATA_PDC40518, 0, PR_MIO, PR_SATA2, ATA_SA150, "PDC40518" },
|
|
{ ATA_PDC40519, 0, PR_MIO, PR_SATA2, ATA_SA150, "PDC40519" },
|
|
{ ATA_PDC40718, 0, PR_MIO, PR_SATA2, ATA_SA300, "PDC40718" },
|
|
{ ATA_PDC40719, 0, PR_MIO, PR_SATA2, ATA_SA300, "PDC40719" },
|
|
{ ATA_PDC40779, 0, PR_MIO, PR_SATA2, ATA_SA300, "PDC40779" },
|
|
{ 0, 0, 0, 0, 0, 0}};
|
|
char buffer[64];
|
|
uintptr_t devid = 0;
|
|
|
|
if (pci_get_vendor(dev) != ATA_PROMISE_ID)
|
|
return ENXIO;
|
|
|
|
if (!(idx = ata_match_chip(dev, ids)))
|
|
return ENXIO;
|
|
|
|
/* if we are on a SuperTrak SX6000 dont attach */
|
|
if ((idx->cfg2 & PR_SX6K) && pci_get_class(GRANDPARENT(dev))==PCIC_BRIDGE &&
|
|
!BUS_READ_IVAR(device_get_parent(GRANDPARENT(dev)),
|
|
GRANDPARENT(dev), PCI_IVAR_DEVID, &devid) &&
|
|
devid == ATA_I960RM)
|
|
return ENXIO;
|
|
|
|
strcpy(buffer, "Promise ");
|
|
strcat(buffer, idx->text);
|
|
|
|
/* if we are on a FastTrak TX4, adjust the interrupt resource */
|
|
if ((idx->cfg2 & PR_TX4) && pci_get_class(GRANDPARENT(dev))==PCIC_BRIDGE &&
|
|
!BUS_READ_IVAR(device_get_parent(GRANDPARENT(dev)),
|
|
GRANDPARENT(dev), PCI_IVAR_DEVID, &devid) &&
|
|
((devid == ATA_DEC_21150) || (devid == ATA_DEC_21150_1))) {
|
|
static long start = 0, end = 0;
|
|
|
|
if (pci_get_slot(dev) == 1) {
|
|
bus_get_resource(dev, SYS_RES_IRQ, 0, &start, &end);
|
|
strcat(buffer, " (channel 0+1)");
|
|
}
|
|
else if (pci_get_slot(dev) == 2 && start && end) {
|
|
bus_set_resource(dev, SYS_RES_IRQ, 0, start, end);
|
|
strcat(buffer, " (channel 2+3)");
|
|
}
|
|
else {
|
|
start = end = 0;
|
|
}
|
|
}
|
|
sprintf(buffer, "%s %s controller", buffer, ata_mode2str(idx->max_dma));
|
|
device_set_desc_copy(dev, buffer);
|
|
ctlr->chip = idx;
|
|
ctlr->chipinit = ata_promise_chipinit;
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
ata_promise_chipinit(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(dev);
|
|
int stat_reg;
|
|
|
|
if (ata_setup_interrupt(dev, ata_generic_intr))
|
|
return ENXIO;
|
|
|
|
switch (ctlr->chip->cfg1) {
|
|
case PR_NEW:
|
|
/* setup clocks */
|
|
ATA_OUTB(ctlr->r_res1, 0x11, ATA_INB(ctlr->r_res1, 0x11) | 0x0a);
|
|
/* FALLTHROUGH */
|
|
|
|
case PR_OLD:
|
|
/* enable burst mode */
|
|
ATA_OUTB(ctlr->r_res1, 0x1f, ATA_INB(ctlr->r_res1, 0x1f) | 0x01);
|
|
ctlr->ch_attach = ata_promise_ch_attach;
|
|
ctlr->ch_detach = ata_pci_ch_detach;
|
|
ctlr->setmode = ata_promise_setmode;
|
|
return 0;
|
|
|
|
case PR_TX:
|
|
ctlr->ch_attach = ata_promise_tx2_ch_attach;
|
|
ctlr->ch_detach = ata_pci_ch_detach;
|
|
ctlr->setmode = ata_promise_setmode;
|
|
return 0;
|
|
|
|
case PR_MIO:
|
|
ctlr->r_type1 = SYS_RES_MEMORY;
|
|
ctlr->r_rid1 = PCIR_BAR(4);
|
|
if (!(ctlr->r_res1 = bus_alloc_resource_any(dev, ctlr->r_type1,
|
|
&ctlr->r_rid1, RF_ACTIVE)))
|
|
goto failnfree;
|
|
|
|
#ifdef __sparc64__
|
|
if (ctlr->chip->cfg2 == PR_SX4X &&
|
|
!bus_space_map(rman_get_bustag(ctlr->r_res1),
|
|
rman_get_bushandle(ctlr->r_res1), rman_get_size(ctlr->r_res1),
|
|
BUS_SPACE_MAP_LINEAR, NULL))
|
|
goto failnfree;
|
|
#endif
|
|
|
|
ctlr->r_type2 = SYS_RES_MEMORY;
|
|
ctlr->r_rid2 = PCIR_BAR(3);
|
|
if (!(ctlr->r_res2 = bus_alloc_resource_any(dev, ctlr->r_type2,
|
|
&ctlr->r_rid2, RF_ACTIVE)))
|
|
goto failnfree;
|
|
|
|
if (ctlr->chip->cfg2 == PR_SX4X) {
|
|
struct ata_promise_sx4 *hpkt;
|
|
u_int32_t dimm = ATA_INL(ctlr->r_res2, 0x000c0080);
|
|
|
|
if (bus_teardown_intr(dev, ctlr->r_irq, ctlr->handle) ||
|
|
bus_setup_intr(dev, ctlr->r_irq, ATA_INTR_FLAGS, NULL,
|
|
ata_promise_sx4_intr, ctlr, &ctlr->handle)) {
|
|
device_printf(dev, "unable to setup interrupt\n");
|
|
goto failnfree;
|
|
}
|
|
|
|
/* print info about cache memory */
|
|
device_printf(dev, "DIMM size %dMB @ 0x%08x%s\n",
|
|
(((dimm >> 16) & 0xff)-((dimm >> 24) & 0xff)+1) << 4,
|
|
((dimm >> 24) & 0xff),
|
|
ATA_INL(ctlr->r_res2, 0x000c0088) & (1<<16) ?
|
|
" ECC enabled" : "" );
|
|
|
|
/* adjust cache memory parameters */
|
|
ATA_OUTL(ctlr->r_res2, 0x000c000c,
|
|
(ATA_INL(ctlr->r_res2, 0x000c000c) & 0xffff0000));
|
|
|
|
/* setup host packet controls */
|
|
hpkt = malloc(sizeof(struct ata_promise_sx4),
|
|
M_ATAPCI, M_NOWAIT | M_ZERO);
|
|
if (hpkt == NULL) {
|
|
device_printf(dev, "Cannot allocate HPKT\n");
|
|
goto failnfree;
|
|
}
|
|
mtx_init(&hpkt->mtx, "ATA promise HPKT lock", NULL, MTX_DEF);
|
|
TAILQ_INIT(&hpkt->queue);
|
|
hpkt->busy = 0;
|
|
ctlr->chipset_data = hpkt;
|
|
ctlr->ch_attach = ata_promise_mio_ch_attach;
|
|
ctlr->ch_detach = ata_promise_mio_ch_detach;
|
|
ctlr->reset = ata_promise_mio_reset;
|
|
ctlr->setmode = ata_promise_setmode;
|
|
ctlr->channels = 4;
|
|
return 0;
|
|
}
|
|
|
|
/* mio type controllers need an interrupt intercept */
|
|
if (bus_teardown_intr(dev, ctlr->r_irq, ctlr->handle) ||
|
|
bus_setup_intr(dev, ctlr->r_irq, ATA_INTR_FLAGS, NULL,
|
|
ata_promise_mio_intr, ctlr, &ctlr->handle)) {
|
|
device_printf(dev, "unable to setup interrupt\n");
|
|
goto failnfree;
|
|
}
|
|
|
|
switch (ctlr->chip->cfg2) {
|
|
case PR_PATA:
|
|
ctlr->channels = ((ATA_INL(ctlr->r_res2, 0x48) & 0x01) > 0) +
|
|
((ATA_INL(ctlr->r_res2, 0x48) & 0x02) > 0) + 2;
|
|
goto sata150;
|
|
case PR_CMBO:
|
|
ctlr->channels = 3;
|
|
goto sata150;
|
|
case PR_SATA:
|
|
ctlr->channels = 4;
|
|
sata150:
|
|
stat_reg = 0x6c;
|
|
break;
|
|
|
|
case PR_CMBO2:
|
|
ctlr->channels = 3;
|
|
goto sataii;
|
|
case PR_SATA2:
|
|
default:
|
|
ctlr->channels = 4;
|
|
sataii:
|
|
stat_reg = 0x60;
|
|
break;
|
|
}
|
|
|
|
/* prime fake interrupt register */
|
|
ctlr->chipset_data = (void *)(uintptr_t)0xffffffff;
|
|
|
|
/* clear SATA status and unmask interrupts */
|
|
ATA_OUTL(ctlr->r_res2, stat_reg, 0x000000ff);
|
|
|
|
/* enable "long burst length" on gen2 chips */
|
|
if ((ctlr->chip->cfg2 == PR_SATA2) || (ctlr->chip->cfg2 == PR_CMBO2))
|
|
ATA_OUTL(ctlr->r_res2, 0x44, ATA_INL(ctlr->r_res2, 0x44) | 0x2000);
|
|
|
|
ctlr->ch_attach = ata_promise_mio_ch_attach;
|
|
ctlr->ch_detach = ata_promise_mio_ch_detach;
|
|
ctlr->reset = ata_promise_mio_reset;
|
|
ctlr->setmode = ata_promise_mio_setmode;
|
|
ctlr->getrev = ata_promise_mio_getrev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
failnfree:
|
|
if (ctlr->r_res2)
|
|
bus_release_resource(dev, ctlr->r_type2, ctlr->r_rid2, ctlr->r_res2);
|
|
if (ctlr->r_res1)
|
|
bus_release_resource(dev, ctlr->r_type1, ctlr->r_rid1, ctlr->r_res1);
|
|
return ENXIO;
|
|
}
|
|
|
|
static int
|
|
ata_promise_ch_attach(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if (ata_pci_ch_attach(dev))
|
|
return ENXIO;
|
|
|
|
if (ctlr->chip->cfg1 == PR_NEW) {
|
|
ch->dma.start = ata_promise_dmastart;
|
|
ch->dma.stop = ata_promise_dmastop;
|
|
ch->dma.reset = ata_promise_dmareset;
|
|
}
|
|
|
|
ch->hw.status = ata_promise_status;
|
|
ch->flags |= ATA_NO_ATAPI_DMA;
|
|
ch->flags |= ATA_CHECKS_CABLE;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_promise_status(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if (ATA_INL(ctlr->r_res1, 0x1c) & (ch->unit ? 0x00004000 : 0x00000400)) {
|
|
return ata_pci_status(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_promise_dmastart(struct ata_request *request)
|
|
{
|
|
struct ata_pci_controller *ctlr=device_get_softc(device_get_parent(request->parent));
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
|
|
if (request->flags & ATA_R_48BIT) {
|
|
ATA_OUTB(ctlr->r_res1, 0x11,
|
|
ATA_INB(ctlr->r_res1, 0x11) | (ch->unit ? 0x08 : 0x02));
|
|
ATA_OUTL(ctlr->r_res1, ch->unit ? 0x24 : 0x20,
|
|
((request->flags & ATA_R_READ) ? 0x05000000 : 0x06000000) |
|
|
(request->bytecount >> 1));
|
|
}
|
|
ATA_IDX_OUTB(ch, ATA_BMSTAT_PORT, (ATA_IDX_INB(ch, ATA_BMSTAT_PORT) |
|
|
(ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR)));
|
|
ATA_IDX_OUTL(ch, ATA_BMDTP_PORT, request->dma->sg_bus);
|
|
ATA_IDX_OUTB(ch, ATA_BMCMD_PORT,
|
|
((request->flags & ATA_R_READ) ? ATA_BMCMD_WRITE_READ : 0) |
|
|
ATA_BMCMD_START_STOP);
|
|
ch->dma.flags |= ATA_DMA_ACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_promise_dmastop(struct ata_request *request)
|
|
{
|
|
struct ata_pci_controller *ctlr=device_get_softc(device_get_parent(request->parent));
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
int error;
|
|
|
|
if (request->flags & ATA_R_48BIT) {
|
|
ATA_OUTB(ctlr->r_res1, 0x11,
|
|
ATA_INB(ctlr->r_res1, 0x11) & ~(ch->unit ? 0x08 : 0x02));
|
|
ATA_OUTL(ctlr->r_res1, ch->unit ? 0x24 : 0x20, 0);
|
|
}
|
|
error = ATA_IDX_INB(ch, ATA_BMSTAT_PORT);
|
|
ATA_IDX_OUTB(ch, ATA_BMCMD_PORT,
|
|
ATA_IDX_INB(ch, ATA_BMCMD_PORT) & ~ATA_BMCMD_START_STOP);
|
|
ATA_IDX_OUTB(ch, ATA_BMSTAT_PORT, ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR);
|
|
ch->dma.flags &= ~ATA_DMA_ACTIVE;
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
ata_promise_dmareset(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
ATA_IDX_OUTB(ch, ATA_BMCMD_PORT,
|
|
ATA_IDX_INB(ch, ATA_BMCMD_PORT) & ~ATA_BMCMD_START_STOP);
|
|
ATA_IDX_OUTB(ch, ATA_BMSTAT_PORT, ATA_BMSTAT_INTERRUPT | ATA_BMSTAT_ERROR);
|
|
ch->flags &= ~ATA_DMA_ACTIVE;
|
|
}
|
|
|
|
static int
|
|
ata_promise_setmode(device_t dev, int target, int mode)
|
|
{
|
|
device_t parent = device_get_parent(dev);
|
|
struct ata_pci_controller *ctlr = device_get_softc(parent);
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
int devno = (ch->unit << 1) + target;
|
|
static const uint32_t timings[][2] = {
|
|
/* PR_OLD PR_NEW mode */
|
|
{ 0x004ff329, 0x004fff2f }, /* PIO 0 */
|
|
{ 0x004fec25, 0x004ff82a }, /* PIO 1 */
|
|
{ 0x004fe823, 0x004ff026 }, /* PIO 2 */
|
|
{ 0x004fe622, 0x004fec24 }, /* PIO 3 */
|
|
{ 0x004fe421, 0x004fe822 }, /* PIO 4 */
|
|
{ 0x004567f3, 0x004acef6 }, /* MWDMA 0 */
|
|
{ 0x004467f3, 0x0048cef6 }, /* MWDMA 1 */
|
|
{ 0x004367f3, 0x0046cef6 }, /* MWDMA 2 */
|
|
{ 0x004367f3, 0x0046cef6 }, /* UDMA 0 */
|
|
{ 0x004247f3, 0x00448ef6 }, /* UDMA 1 */
|
|
{ 0x004127f3, 0x00436ef6 }, /* UDMA 2 */
|
|
{ 0, 0x00424ef6 }, /* UDMA 3 */
|
|
{ 0, 0x004127f3 }, /* UDMA 4 */
|
|
{ 0, 0x004127f3 } /* UDMA 5 */
|
|
};
|
|
|
|
mode = min(mode, ctlr->chip->max_dma);
|
|
|
|
switch (ctlr->chip->cfg1) {
|
|
case PR_OLD:
|
|
case PR_NEW:
|
|
if (ata_dma_check_80pin && mode > ATA_UDMA2 &&
|
|
(pci_read_config(parent, 0x50, 2) &
|
|
(ch->unit ? 1 << 11 : 1 << 10))) {
|
|
ata_print_cable(dev, "controller");
|
|
mode = ATA_UDMA2;
|
|
}
|
|
break;
|
|
|
|
case PR_TX:
|
|
ATA_IDX_OUTB(ch, ATA_BMDEVSPEC_0, 0x0b);
|
|
if (ata_dma_check_80pin && mode > ATA_UDMA2 &&
|
|
ATA_IDX_INB(ch, ATA_BMDEVSPEC_1) & 0x04) {
|
|
ata_print_cable(dev, "controller");
|
|
mode = ATA_UDMA2;
|
|
}
|
|
break;
|
|
|
|
case PR_MIO:
|
|
if (ata_dma_check_80pin && mode > ATA_UDMA2 &&
|
|
(ATA_INL(ctlr->r_res2,
|
|
(ctlr->chip->cfg2 & PR_SX4X ? 0x000c0260 : 0x0260) +
|
|
(ch->unit << 7)) & 0x01000000)) {
|
|
ata_print_cable(dev, "controller");
|
|
mode = ATA_UDMA2;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (ctlr->chip->cfg1 < PR_TX)
|
|
pci_write_config(parent, 0x60 + (devno << 2),
|
|
timings[ata_mode2idx(mode)][ctlr->chip->cfg1], 4);
|
|
return (mode);
|
|
}
|
|
|
|
static int
|
|
ata_promise_tx2_ch_attach(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if (ata_pci_ch_attach(dev))
|
|
return ENXIO;
|
|
|
|
ch->hw.status = ata_promise_tx2_status;
|
|
ch->flags |= ATA_CHECKS_CABLE;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_promise_tx2_status(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
ATA_IDX_OUTB(ch, ATA_BMDEVSPEC_0, 0x0b);
|
|
if (ATA_IDX_INB(ch, ATA_BMDEVSPEC_1) & 0x20) {
|
|
return ata_pci_status(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_ch_attach(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
int offset = (ctlr->chip->cfg2 & PR_SX4X) ? 0x000c0000 : 0;
|
|
int i;
|
|
|
|
ata_promise_mio_dmainit(dev);
|
|
|
|
for (i = ATA_DATA; i <= ATA_COMMAND; i++) {
|
|
ch->r_io[i].res = ctlr->r_res2;
|
|
ch->r_io[i].offset = offset + 0x0200 + (i << 2) + (ch->unit << 7);
|
|
}
|
|
ch->r_io[ATA_CONTROL].res = ctlr->r_res2;
|
|
ch->r_io[ATA_CONTROL].offset = offset + 0x0238 + (ch->unit << 7);
|
|
ch->r_io[ATA_IDX_ADDR].res = ctlr->r_res2;
|
|
ata_default_registers(dev);
|
|
if ((ctlr->chip->cfg2 & (PR_SATA | PR_SATA2)) ||
|
|
((ctlr->chip->cfg2 & (PR_CMBO | PR_CMBO2)) && ch->unit < 2)) {
|
|
ch->r_io[ATA_SSTATUS].res = ctlr->r_res2;
|
|
ch->r_io[ATA_SSTATUS].offset = 0x400 + (ch->unit << 8);
|
|
ch->r_io[ATA_SERROR].res = ctlr->r_res2;
|
|
ch->r_io[ATA_SERROR].offset = 0x404 + (ch->unit << 8);
|
|
ch->r_io[ATA_SCONTROL].res = ctlr->r_res2;
|
|
ch->r_io[ATA_SCONTROL].offset = 0x408 + (ch->unit << 8);
|
|
ch->flags |= ATA_NO_SLAVE;
|
|
ch->flags |= ATA_SATA;
|
|
}
|
|
ch->flags |= ATA_USE_16BIT;
|
|
ch->flags |= ATA_CHECKS_CABLE;
|
|
|
|
ata_generic_hw(dev);
|
|
if (ctlr->chip->cfg2 & PR_SX4X) {
|
|
ch->hw.command = ata_promise_sx4_command;
|
|
}
|
|
else {
|
|
ch->hw.command = ata_promise_mio_command;
|
|
ch->hw.status = ata_promise_mio_status;
|
|
ch->hw.softreset = ata_promise_mio_softreset;
|
|
ch->hw.pm_read = ata_promise_mio_pm_read;
|
|
ch->hw.pm_write = ata_promise_mio_pm_write;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_ch_detach(device_t dev)
|
|
{
|
|
|
|
ata_dmafini(dev);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ata_promise_mio_intr(void *data)
|
|
{
|
|
struct ata_pci_controller *ctlr = data;
|
|
struct ata_channel *ch;
|
|
u_int32_t vector;
|
|
int unit;
|
|
|
|
/*
|
|
* since reading interrupt status register on early "mio" chips
|
|
* clears the status bits we cannot read it for each channel later on
|
|
* in the generic interrupt routine.
|
|
*/
|
|
vector = ATA_INL(ctlr->r_res2, 0x040);
|
|
ATA_OUTL(ctlr->r_res2, 0x040, vector);
|
|
ctlr->chipset_data = (void *)(uintptr_t)vector;
|
|
|
|
for (unit = 0; unit < ctlr->channels; unit++) {
|
|
if ((ch = ctlr->interrupt[unit].argument))
|
|
ctlr->interrupt[unit].function(ch);
|
|
}
|
|
|
|
ctlr->chipset_data = (void *)(uintptr_t)0xffffffff;
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_status(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
u_int32_t stat_reg, vector, status;
|
|
|
|
switch (ctlr->chip->cfg2) {
|
|
case PR_PATA:
|
|
case PR_CMBO:
|
|
case PR_SATA:
|
|
stat_reg = 0x6c;
|
|
break;
|
|
case PR_CMBO2:
|
|
case PR_SATA2:
|
|
default:
|
|
stat_reg = 0x60;
|
|
break;
|
|
}
|
|
|
|
/* read and acknowledge interrupt */
|
|
vector = (uint32_t)(uintptr_t)ctlr->chipset_data;
|
|
|
|
/* read and clear interface status */
|
|
status = ATA_INL(ctlr->r_res2, stat_reg);
|
|
ATA_OUTL(ctlr->r_res2, stat_reg, status & (0x00000011 << ch->unit));
|
|
|
|
/* check for and handle disconnect events */
|
|
if (status & (0x00000001 << ch->unit)) {
|
|
if (bootverbose)
|
|
device_printf(dev, "DISCONNECT requested\n");
|
|
taskqueue_enqueue(taskqueue_thread, &ch->conntask);
|
|
}
|
|
|
|
/* check for and handle connect events */
|
|
if (status & (0x00000010 << ch->unit)) {
|
|
if (bootverbose)
|
|
device_printf(dev, "CONNECT requested\n");
|
|
taskqueue_enqueue(taskqueue_thread, &ch->conntask);
|
|
}
|
|
|
|
/* do we have any device action ? */
|
|
return (vector & (1 << (ch->unit + 1)));
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_command(struct ata_request *request)
|
|
{
|
|
struct ata_pci_controller *ctlr=device_get_softc(device_get_parent(request->parent));
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
|
|
u_int32_t *wordp = (u_int32_t *)ch->dma.work;
|
|
|
|
ATA_OUTL(ctlr->r_res2, (ch->unit + 1) << 2, 0x00000001);
|
|
|
|
if ((ctlr->chip->cfg2 == PR_SATA2) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO2) && (ch->unit < 2))) {
|
|
/* set portmultiplier port */
|
|
ATA_OUTB(ctlr->r_res2, 0x4e8 + (ch->unit << 8), request->unit & 0x0f);
|
|
}
|
|
|
|
/* XXX SOS add ATAPI commands support later */
|
|
switch (request->u.ata.command) {
|
|
default:
|
|
return ata_generic_command(request);
|
|
|
|
case ATA_READ_DMA:
|
|
case ATA_READ_DMA48:
|
|
wordp[0] = htole32(0x04 | ((ch->unit + 1) << 16) | (0x00 << 24));
|
|
break;
|
|
|
|
case ATA_WRITE_DMA:
|
|
case ATA_WRITE_DMA48:
|
|
wordp[0] = htole32(0x00 | ((ch->unit + 1) << 16) | (0x00 << 24));
|
|
break;
|
|
}
|
|
wordp[1] = htole32(request->dma->sg_bus);
|
|
wordp[2] = 0;
|
|
ata_promise_apkt((u_int8_t*)wordp, request);
|
|
|
|
ATA_OUTL(ctlr->r_res2, 0x0240 + (ch->unit << 7), ch->dma.work_bus);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ata_promise_mio_reset(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
struct ata_promise_sx4 *hpktp;
|
|
|
|
switch (ctlr->chip->cfg2) {
|
|
case PR_SX4X:
|
|
|
|
/* softreset channel ATA module */
|
|
hpktp = ctlr->chipset_data;
|
|
ATA_OUTL(ctlr->r_res2, 0xc0260 + (ch->unit << 7), ch->unit + 1);
|
|
ata_udelay(1000);
|
|
ATA_OUTL(ctlr->r_res2, 0xc0260 + (ch->unit << 7),
|
|
(ATA_INL(ctlr->r_res2, 0xc0260 + (ch->unit << 7)) &
|
|
~0x00003f9f) | (ch->unit + 1));
|
|
|
|
/* softreset HOST module */ /* XXX SOS what about other outstandings */
|
|
mtx_lock(&hpktp->mtx);
|
|
ATA_OUTL(ctlr->r_res2, 0xc012c,
|
|
(ATA_INL(ctlr->r_res2, 0xc012c) & ~0x00000f9f) | (1 << 11));
|
|
DELAY(10);
|
|
ATA_OUTL(ctlr->r_res2, 0xc012c,
|
|
(ATA_INL(ctlr->r_res2, 0xc012c) & ~0x00000f9f));
|
|
hpktp->busy = 0;
|
|
mtx_unlock(&hpktp->mtx);
|
|
ata_generic_reset(dev);
|
|
break;
|
|
|
|
case PR_PATA:
|
|
case PR_CMBO:
|
|
case PR_SATA:
|
|
if ((ctlr->chip->cfg2 == PR_SATA) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO) && (ch->unit < 2))) {
|
|
|
|
/* mask plug/unplug intr */
|
|
ATA_OUTL(ctlr->r_res2, 0x06c, (0x00110000 << ch->unit));
|
|
}
|
|
|
|
/* softreset channels ATA module */
|
|
ATA_OUTL(ctlr->r_res2, 0x0260 + (ch->unit << 7), (1 << 11));
|
|
ata_udelay(10000);
|
|
ATA_OUTL(ctlr->r_res2, 0x0260 + (ch->unit << 7),
|
|
(ATA_INL(ctlr->r_res2, 0x0260 + (ch->unit << 7)) &
|
|
~0x00003f9f) | (ch->unit + 1));
|
|
|
|
if ((ctlr->chip->cfg2 == PR_SATA) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO) && (ch->unit < 2))) {
|
|
|
|
if (ata_sata_phy_reset(dev, -1, 1))
|
|
ata_generic_reset(dev);
|
|
else
|
|
ch->devices = 0;
|
|
|
|
/* reset and enable plug/unplug intr */
|
|
ATA_OUTL(ctlr->r_res2, 0x06c, (0x00000011 << ch->unit));
|
|
}
|
|
else
|
|
ata_generic_reset(dev);
|
|
break;
|
|
|
|
case PR_CMBO2:
|
|
case PR_SATA2:
|
|
if ((ctlr->chip->cfg2 == PR_SATA2) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO2) && (ch->unit < 2))) {
|
|
/* set portmultiplier port */
|
|
//ATA_OUTL(ctlr->r_res2, 0x4e8 + (ch->unit << 8), 0x0f);
|
|
|
|
/* mask plug/unplug intr */
|
|
ATA_OUTL(ctlr->r_res2, 0x060, (0x00110000 << ch->unit));
|
|
}
|
|
|
|
/* softreset channels ATA module */
|
|
ATA_OUTL(ctlr->r_res2, 0x0260 + (ch->unit << 7), (1 << 11));
|
|
ata_udelay(10000);
|
|
ATA_OUTL(ctlr->r_res2, 0x0260 + (ch->unit << 7),
|
|
(ATA_INL(ctlr->r_res2, 0x0260 + (ch->unit << 7)) &
|
|
~0x00003f9f) | (ch->unit + 1));
|
|
|
|
if ((ctlr->chip->cfg2 == PR_SATA2) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO2) && (ch->unit < 2))) {
|
|
|
|
/* set PHY mode to "improved" */
|
|
ATA_OUTL(ctlr->r_res2, 0x414 + (ch->unit << 8),
|
|
(ATA_INL(ctlr->r_res2, 0x414 + (ch->unit << 8)) &
|
|
~0x00000003) | 0x00000001);
|
|
|
|
if (ata_sata_phy_reset(dev, -1, 1)) {
|
|
u_int32_t signature = ch->hw.softreset(dev, ATA_PM);
|
|
|
|
if (1 | bootverbose)
|
|
device_printf(dev, "SIGNATURE: %08x\n", signature);
|
|
|
|
switch (signature >> 16) {
|
|
case 0x0000:
|
|
ch->devices = ATA_ATA_MASTER;
|
|
break;
|
|
case 0x9669:
|
|
ch->devices = ATA_PORTMULTIPLIER;
|
|
ata_pm_identify(dev);
|
|
break;
|
|
case 0xeb14:
|
|
ch->devices = ATA_ATAPI_MASTER;
|
|
break;
|
|
default: /* SOS XXX */
|
|
if (bootverbose)
|
|
device_printf(dev,
|
|
"No signature, assuming disk device\n");
|
|
ch->devices = ATA_ATA_MASTER;
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "promise_mio_reset devices=%08x\n",
|
|
ch->devices);
|
|
|
|
} else
|
|
ch->devices = 0;
|
|
|
|
/* reset and enable plug/unplug intr */
|
|
ATA_OUTL(ctlr->r_res2, 0x060, (0x00000011 << ch->unit));
|
|
|
|
///* set portmultiplier port */
|
|
ATA_OUTL(ctlr->r_res2, 0x4e8 + (ch->unit << 8), 0x00);
|
|
}
|
|
else
|
|
ata_generic_reset(dev);
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_pm_read(device_t dev, int port, int reg, u_int32_t *result)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
int timeout = 0;
|
|
|
|
if (port < 0) {
|
|
*result = ATA_IDX_INL(ch, reg);
|
|
return (0);
|
|
}
|
|
if (port < ATA_PM) {
|
|
switch (reg) {
|
|
case ATA_SSTATUS:
|
|
reg = 0;
|
|
break;
|
|
case ATA_SERROR:
|
|
reg = 1;
|
|
break;
|
|
case ATA_SCONTROL:
|
|
reg = 2;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
/* set portmultiplier port */
|
|
ATA_OUTB(ctlr->r_res2, 0x4e8 + (ch->unit << 8), 0x0f);
|
|
|
|
ATA_IDX_OUTB(ch, ATA_FEATURE, reg);
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, port);
|
|
|
|
ATA_IDX_OUTB(ch, ATA_COMMAND, ATA_READ_PM);
|
|
|
|
while (timeout < 1000000) {
|
|
u_int8_t status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
if (!(status & ATA_S_BUSY))
|
|
break;
|
|
timeout += 1000;
|
|
DELAY(1000);
|
|
}
|
|
if (timeout >= 1000000)
|
|
return ATA_E_ABORT;
|
|
|
|
*result = ATA_IDX_INB(ch, ATA_COUNT) |
|
|
(ATA_IDX_INB(ch, ATA_SECTOR) << 8) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_LSB) << 16) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_MSB) << 24);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_pm_write(device_t dev, int port, int reg, u_int32_t value)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
int timeout = 0;
|
|
|
|
if (port < 0) {
|
|
ATA_IDX_OUTL(ch, reg, value);
|
|
return (0);
|
|
}
|
|
if (port < ATA_PM) {
|
|
switch (reg) {
|
|
case ATA_SSTATUS:
|
|
reg = 0;
|
|
break;
|
|
case ATA_SERROR:
|
|
reg = 1;
|
|
break;
|
|
case ATA_SCONTROL:
|
|
reg = 2;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
/* set portmultiplier port */
|
|
ATA_OUTB(ctlr->r_res2, 0x4e8 + (ch->unit << 8), 0x0f);
|
|
|
|
ATA_IDX_OUTB(ch, ATA_FEATURE, reg);
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, port);
|
|
ATA_IDX_OUTB(ch, ATA_COUNT, value & 0xff);
|
|
ATA_IDX_OUTB(ch, ATA_SECTOR, (value >> 8) & 0xff);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_LSB, (value >> 16) & 0xff);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_MSB, (value >> 24) & 0xff);
|
|
|
|
ATA_IDX_OUTB(ch, ATA_COMMAND, ATA_WRITE_PM);
|
|
|
|
while (timeout < 1000000) {
|
|
u_int8_t status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
if (!(status & ATA_S_BUSY))
|
|
break;
|
|
timeout += 1000;
|
|
DELAY(1000);
|
|
}
|
|
if (timeout >= 1000000)
|
|
return ATA_E_ABORT;
|
|
|
|
return ATA_IDX_INB(ch, ATA_ERROR);
|
|
}
|
|
|
|
/* must be called with ATA channel locked and state_mtx held */
|
|
static u_int32_t
|
|
ata_promise_mio_softreset(device_t dev, int port)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
int timeout;
|
|
|
|
/* set portmultiplier port */
|
|
ATA_OUTB(ctlr->r_res2, 0x4e8 + (ch->unit << 8), port & 0x0f);
|
|
|
|
/* softreset device on this channel */
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | ATA_DEV(ATA_MASTER));
|
|
DELAY(10);
|
|
ATA_IDX_OUTB(ch, ATA_CONTROL, ATA_A_IDS | ATA_A_RESET);
|
|
ata_udelay(10000);
|
|
ATA_IDX_OUTB(ch, ATA_CONTROL, ATA_A_IDS);
|
|
ata_udelay(150000);
|
|
ATA_IDX_INB(ch, ATA_ERROR);
|
|
|
|
/* wait for BUSY to go inactive */
|
|
for (timeout = 0; timeout < 100; timeout++) {
|
|
u_int8_t err, stat;
|
|
|
|
err = ATA_IDX_INB(ch, ATA_ERROR);
|
|
stat = ATA_IDX_INB(ch, ATA_STATUS);
|
|
|
|
//if (stat == err && timeout > (stat & ATA_S_BUSY ? 100 : 10))
|
|
//break;
|
|
|
|
if (!(stat & ATA_S_BUSY)) {
|
|
//if ((err & 0x7f) == ATA_E_ILI) {
|
|
return ATA_IDX_INB(ch, ATA_COUNT) |
|
|
(ATA_IDX_INB(ch, ATA_SECTOR) << 8) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_LSB) << 16) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_MSB) << 24);
|
|
//}
|
|
//else if (stat & 0x0f) {
|
|
//stat |= ATA_S_BUSY;
|
|
//}
|
|
}
|
|
|
|
if (!(stat & ATA_S_BUSY) || (stat == 0xff && timeout > 10))
|
|
break;
|
|
ata_udelay(100000);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void
|
|
ata_promise_mio_dmainit(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
/* note start and stop are not used here */
|
|
ch->dma.setprd = ata_promise_mio_setprd;
|
|
ch->dma.max_iosize = 65536;
|
|
ata_dmainit(dev);
|
|
}
|
|
|
|
#define MAXLASTSGSIZE (32 * sizeof(u_int32_t))
|
|
static void
|
|
ata_promise_mio_setprd(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
|
|
{
|
|
struct ata_dmasetprd_args *args = xsc;
|
|
struct ata_dma_prdentry *prd = args->dmatab;
|
|
int i;
|
|
|
|
if ((args->error = error))
|
|
return;
|
|
|
|
for (i = 0; i < nsegs; i++) {
|
|
prd[i].addr = htole32(segs[i].ds_addr);
|
|
prd[i].count = htole32(segs[i].ds_len);
|
|
}
|
|
if (segs[i - 1].ds_len > MAXLASTSGSIZE) {
|
|
//printf("split last SG element of %u\n", segs[i - 1].ds_len);
|
|
prd[i - 1].count = htole32(segs[i - 1].ds_len - MAXLASTSGSIZE);
|
|
prd[i].count = htole32(MAXLASTSGSIZE);
|
|
prd[i].addr = htole32(segs[i - 1].ds_addr +
|
|
(segs[i - 1].ds_len - MAXLASTSGSIZE));
|
|
nsegs++;
|
|
i++;
|
|
}
|
|
prd[i - 1].count |= htole32(ATA_DMA_EOT);
|
|
KASSERT(nsegs <= ATA_DMA_ENTRIES, ("too many DMA segment entries\n"));
|
|
args->nsegs = nsegs;
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_setmode(device_t dev, int target, int mode)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if ( (ctlr->chip->cfg2 == PR_SATA) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO) && (ch->unit < 2)) ||
|
|
(ctlr->chip->cfg2 == PR_SATA2) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO2) && (ch->unit < 2)))
|
|
mode = ata_sata_setmode(dev, target, mode);
|
|
else
|
|
mode = ata_promise_setmode(dev, target, mode);
|
|
return (mode);
|
|
}
|
|
|
|
static int
|
|
ata_promise_mio_getrev(device_t dev, int target)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if ( (ctlr->chip->cfg2 == PR_SATA) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO) && (ch->unit < 2)) ||
|
|
(ctlr->chip->cfg2 == PR_SATA2) ||
|
|
((ctlr->chip->cfg2 == PR_CMBO2) && (ch->unit < 2)))
|
|
return (ata_sata_getrev(dev, target));
|
|
else
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ata_promise_sx4_intr(void *data)
|
|
{
|
|
struct ata_pci_controller *ctlr = data;
|
|
struct ata_channel *ch;
|
|
u_int32_t vector = ATA_INL(ctlr->r_res2, 0x000c0480);
|
|
int unit;
|
|
|
|
for (unit = 0; unit < ctlr->channels; unit++) {
|
|
if (vector & (1 << (unit + 1)))
|
|
if ((ch = ctlr->interrupt[unit].argument))
|
|
ctlr->interrupt[unit].function(ch);
|
|
if (vector & (1 << (unit + 5)))
|
|
if ((ch = ctlr->interrupt[unit].argument))
|
|
ata_promise_queue_hpkt(ctlr,
|
|
htole32((ch->unit * ATA_PDC_CHN_OFFSET) +
|
|
ATA_PDC_HPKT_OFFSET));
|
|
if (vector & (1 << (unit + 9))) {
|
|
ata_promise_next_hpkt(ctlr);
|
|
if ((ch = ctlr->interrupt[unit].argument))
|
|
ctlr->interrupt[unit].function(ch);
|
|
}
|
|
if (vector & (1 << (unit + 13))) {
|
|
ata_promise_next_hpkt(ctlr);
|
|
if ((ch = ctlr->interrupt[unit].argument))
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0240 + (ch->unit << 7),
|
|
htole32((ch->unit * ATA_PDC_CHN_OFFSET) +
|
|
ATA_PDC_APKT_OFFSET));
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
ata_promise_sx4_command(struct ata_request *request)
|
|
{
|
|
device_t gparent = device_get_parent(request->parent);
|
|
struct ata_pci_controller *ctlr = device_get_softc(gparent);
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
struct ata_dma_prdentry *prd;
|
|
caddr_t window = rman_get_virtual(ctlr->r_res1);
|
|
u_int32_t *wordp;
|
|
int i, idx, length = 0;
|
|
|
|
/* XXX SOS add ATAPI commands support later */
|
|
switch (request->u.ata.command) {
|
|
|
|
default:
|
|
return -1;
|
|
|
|
case ATA_ATA_IDENTIFY:
|
|
case ATA_READ:
|
|
case ATA_READ48:
|
|
case ATA_READ_MUL:
|
|
case ATA_READ_MUL48:
|
|
case ATA_WRITE:
|
|
case ATA_WRITE48:
|
|
case ATA_WRITE_MUL:
|
|
case ATA_WRITE_MUL48:
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0400 + ((ch->unit + 1) << 2), 0x00000001);
|
|
return ata_generic_command(request);
|
|
|
|
case ATA_SETFEATURES:
|
|
case ATA_FLUSHCACHE:
|
|
case ATA_FLUSHCACHE48:
|
|
case ATA_SLEEP:
|
|
case ATA_SET_MULTI:
|
|
wordp = (u_int32_t *)
|
|
(window + (ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_APKT_OFFSET);
|
|
wordp[0] = htole32(0x08 | ((ch->unit + 1)<<16) | (0x00 << 24));
|
|
wordp[1] = 0;
|
|
wordp[2] = 0;
|
|
ata_promise_apkt((u_int8_t *)wordp, request);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0484, 0x00000001);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0400 + ((ch->unit + 1) << 2), 0x00000001);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0240 + (ch->unit << 7),
|
|
htole32((ch->unit * ATA_PDC_CHN_OFFSET)+ATA_PDC_APKT_OFFSET));
|
|
return 0;
|
|
|
|
case ATA_READ_DMA:
|
|
case ATA_READ_DMA48:
|
|
case ATA_WRITE_DMA:
|
|
case ATA_WRITE_DMA48:
|
|
prd = request->dma->sg;
|
|
wordp = (u_int32_t *)
|
|
(window + (ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_HSG_OFFSET);
|
|
i = idx = 0;
|
|
do {
|
|
wordp[idx++] = prd[i].addr;
|
|
wordp[idx++] = prd[i].count;
|
|
length += (prd[i].count & ~ATA_DMA_EOT);
|
|
} while (!(prd[i++].count & ATA_DMA_EOT));
|
|
|
|
wordp = (u_int32_t *)
|
|
(window + (ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_LSG_OFFSET);
|
|
wordp[0] = htole32((ch->unit * ATA_PDC_BUF_OFFSET) + ATA_PDC_BUF_BASE);
|
|
wordp[1] = htole32(request->bytecount | ATA_DMA_EOT);
|
|
|
|
wordp = (u_int32_t *)
|
|
(window + (ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_ASG_OFFSET);
|
|
wordp[0] = htole32((ch->unit * ATA_PDC_BUF_OFFSET) + ATA_PDC_BUF_BASE);
|
|
wordp[1] = htole32(request->bytecount | ATA_DMA_EOT);
|
|
|
|
wordp = (u_int32_t *)
|
|
(window + (ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_HPKT_OFFSET);
|
|
if (request->flags & ATA_R_READ)
|
|
wordp[0] = htole32(0x14 | ((ch->unit+9)<<16) | ((ch->unit+5)<<24));
|
|
if (request->flags & ATA_R_WRITE)
|
|
wordp[0] = htole32(0x00 | ((ch->unit+13)<<16) | (0x00<<24));
|
|
wordp[1] = htole32((ch->unit * ATA_PDC_CHN_OFFSET)+ATA_PDC_HSG_OFFSET);
|
|
wordp[2] = htole32((ch->unit * ATA_PDC_CHN_OFFSET)+ATA_PDC_LSG_OFFSET);
|
|
wordp[3] = 0;
|
|
|
|
wordp = (u_int32_t *)
|
|
(window + (ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_APKT_OFFSET);
|
|
if (request->flags & ATA_R_READ)
|
|
wordp[0] = htole32(0x04 | ((ch->unit+5)<<16) | (0x00<<24));
|
|
if (request->flags & ATA_R_WRITE)
|
|
wordp[0] = htole32(0x10 | ((ch->unit+1)<<16) | ((ch->unit+13)<<24));
|
|
wordp[1] = htole32((ch->unit * ATA_PDC_CHN_OFFSET)+ATA_PDC_ASG_OFFSET);
|
|
wordp[2] = 0;
|
|
ata_promise_apkt((u_int8_t *)wordp, request);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0484, 0x00000001);
|
|
|
|
if (request->flags & ATA_R_READ) {
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0400 + ((ch->unit+5)<<2), 0x00000001);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0400 + ((ch->unit+9)<<2), 0x00000001);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0240 + (ch->unit << 7),
|
|
htole32((ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_APKT_OFFSET));
|
|
}
|
|
if (request->flags & ATA_R_WRITE) {
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0400 + ((ch->unit+1)<<2), 0x00000001);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0400 + ((ch->unit+13)<<2), 0x00000001);
|
|
ata_promise_queue_hpkt(ctlr,
|
|
htole32((ch->unit * ATA_PDC_CHN_OFFSET) + ATA_PDC_HPKT_OFFSET));
|
|
}
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ata_promise_apkt(u_int8_t *bytep, struct ata_request *request)
|
|
{
|
|
int i = 12;
|
|
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_PDC_WAIT_NBUSY|ATA_DRIVE;
|
|
bytep[i++] = ATA_D_IBM | ATA_D_LBA | ATA_DEV(request->unit);
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_CTL;
|
|
bytep[i++] = ATA_A_4BIT;
|
|
|
|
if (request->flags & ATA_R_48BIT) {
|
|
bytep[i++] = ATA_PDC_2B | ATA_PDC_WRITE_REG | ATA_FEATURE;
|
|
bytep[i++] = request->u.ata.feature >> 8;
|
|
bytep[i++] = request->u.ata.feature;
|
|
bytep[i++] = ATA_PDC_2B | ATA_PDC_WRITE_REG | ATA_COUNT;
|
|
bytep[i++] = request->u.ata.count >> 8;
|
|
bytep[i++] = request->u.ata.count;
|
|
bytep[i++] = ATA_PDC_2B | ATA_PDC_WRITE_REG | ATA_SECTOR;
|
|
bytep[i++] = request->u.ata.lba >> 24;
|
|
bytep[i++] = request->u.ata.lba;
|
|
bytep[i++] = ATA_PDC_2B | ATA_PDC_WRITE_REG | ATA_CYL_LSB;
|
|
bytep[i++] = request->u.ata.lba >> 32;
|
|
bytep[i++] = request->u.ata.lba >> 8;
|
|
bytep[i++] = ATA_PDC_2B | ATA_PDC_WRITE_REG | ATA_CYL_MSB;
|
|
bytep[i++] = request->u.ata.lba >> 40;
|
|
bytep[i++] = request->u.ata.lba >> 16;
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_DRIVE;
|
|
bytep[i++] = ATA_D_LBA | ATA_DEV(request->unit);
|
|
}
|
|
else {
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_FEATURE;
|
|
bytep[i++] = request->u.ata.feature;
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_COUNT;
|
|
bytep[i++] = request->u.ata.count;
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_SECTOR;
|
|
bytep[i++] = request->u.ata.lba;
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_CYL_LSB;
|
|
bytep[i++] = request->u.ata.lba >> 8;
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_CYL_MSB;
|
|
bytep[i++] = request->u.ata.lba >> 16;
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_REG | ATA_DRIVE;
|
|
bytep[i++] = ATA_D_LBA | ATA_D_IBM | ATA_DEV(request->unit) |
|
|
((request->u.ata.lba >> 24)&0xf);
|
|
}
|
|
bytep[i++] = ATA_PDC_1B | ATA_PDC_WRITE_END | ATA_COMMAND;
|
|
bytep[i++] = request->u.ata.command;
|
|
return i;
|
|
}
|
|
|
|
static void
|
|
ata_promise_queue_hpkt(struct ata_pci_controller *ctlr, u_int32_t hpkt)
|
|
{
|
|
struct ata_promise_sx4 *hpktp = ctlr->chipset_data;
|
|
|
|
mtx_lock(&hpktp->mtx);
|
|
if (hpktp->busy) {
|
|
struct host_packet *hp =
|
|
malloc(sizeof(struct host_packet), M_TEMP, M_NOWAIT | M_ZERO);
|
|
hp->addr = hpkt;
|
|
TAILQ_INSERT_TAIL(&hpktp->queue, hp, chain);
|
|
}
|
|
else {
|
|
hpktp->busy = 1;
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0100, hpkt);
|
|
}
|
|
mtx_unlock(&hpktp->mtx);
|
|
}
|
|
|
|
static void
|
|
ata_promise_next_hpkt(struct ata_pci_controller *ctlr)
|
|
{
|
|
struct ata_promise_sx4 *hpktp = ctlr->chipset_data;
|
|
struct host_packet *hp;
|
|
|
|
mtx_lock(&hpktp->mtx);
|
|
if ((hp = TAILQ_FIRST(&hpktp->queue))) {
|
|
TAILQ_REMOVE(&hpktp->queue, hp, chain);
|
|
ATA_OUTL(ctlr->r_res2, 0x000c0100, hp->addr);
|
|
free(hp, M_TEMP);
|
|
}
|
|
else
|
|
hpktp->busy = 0;
|
|
mtx_unlock(&hpktp->mtx);
|
|
}
|
|
|
|
ATA_DECLARE_DRIVER(ata_promise);
|