freebsd-skq/sys/i386/isa/syscons.h
Kazutaka YOKOTA 9d6218d088 Add a new compile option SC_HISTORY_SIZE to specify the history buffer
size in terms of lines (instead of bytes).  When changing video mode
in ioctl SW_XXX commands, syscons checks scp->history_size and
allocate a history buffer at least as large as the new screen size.
(This was unnecessary before, because HISTORY_SIZE was as large as 100
lines and this is bigger than the maximum screen size: 60 lines).
Similar adjustment is done in ioctl CONS_HISTORY command too.

PR: kern/4169
Reviewed by: sos
1997-09-04 23:01:06 +00:00

205 lines
7.5 KiB
C

/*-
* Copyright (c) 1995-1997 Søren Schmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: syscons.h,v 1.32 1997/08/25 23:21:55 bde Exp $
*/
#ifndef _I386_ISA_SYSCONS_H_
#define _I386_ISA_SYSCONS_H_
/* vm things */
#define ISMAPPED(pa, width) \
(((pa) <= (u_long)0x1000 - (width)) \
|| ((pa) >= 0xa0000 && (pa) <= 0x100000 - (width)))
#define pa_to_va(pa) (KERNBASE + (pa)) /* works if ISMAPPED(pa...) */
/* printable chars */
#define PRINTABLE(ch) ((ch) > 0x1b || ((ch) > 0x0d && (ch) < 0x1b) \
|| (ch) < 0x07)
/* macros for "intelligent" screen update */
#define mark_for_update(scp, x) {\
if ((x) < scp->start) scp->start = (x);\
else if ((x) > scp->end) scp->end = (x);\
}
#define mark_all(scp) {\
scp->start = 0;\
scp->end = scp->xsize * scp->ysize;\
}
/* status flags */
#define LOCK_KEY_MASK 0x0000F
#define LED_MASK 0x00007
#define UNKNOWN_MODE 0x00010
#define KBD_RAW_MODE 0x00020
#define SWITCH_WAIT_REL 0x00040
#define SWITCH_WAIT_ACQ 0x00080
#define BUFFER_SAVED 0x00100
#define CURSOR_ENABLED 0x00200
#define MOUSE_ENABLED 0x00400
#define MOUSE_MOVED 0x00800
#define MOUSE_CUTTING 0x01000
#define MOUSE_VISIBLE 0x02000
/* configuration flags */
#define VISUAL_BELL 0x00001
#define BLINK_CURSOR 0x00002
#define CHAR_CURSOR 0x00004
#define DETECT_KBD 0x00008
#define XT_KEYBD 0x00010
#define KBD_NORESET 0x00020
/* attribute flags */
#define NORMAL_ATTR 0x00
#define BLINK_ATTR 0x01
#define BOLD_ATTR 0x02
#define UNDERLINE_ATTR 0x04
#define REVERSE_ATTR 0x08
#define FOREGROUND_CHANGED 0x10
#define BACKGROUND_CHANGED 0x20
/* video hardware memory addresses */
#define VIDEOMEM 0x000A0000
/* misc defines */
#define FALSE 0
#define TRUE 1
#define MAX_ESC_PAR 5
#define LOAD 1
#define SAVE 0
#define COL 80
#define ROW 25
#define BELL_DURATION 5
#define BELL_PITCH 800
#define CONSOLE_BUFSIZE 1024
#define PCBURST 128
#define FONT_NONE 1
#define FONT_8 2
#define FONT_14 4
#define FONT_16 8
#if !defined(SC_HISTORY_SIZE)
#define SC_HISTORY_SIZE (ROW * 4)
#endif /* SC_HISTORY_SIZE */
#define HISTORY_SIZE (COL * (SC_HISTORY_SIZE))
/* defines related to hardware addresses */
#define MONO_BASE 0x3B4 /* crt controller base mono */
#define COLOR_BASE 0x3D4 /* crt controller base color */
#define MISC 0x3C2 /* misc output register */
#define ATC IO_VGA+0x00 /* attribute controller */
#define TSIDX IO_VGA+0x04 /* timing sequencer idx */
#define TSREG IO_VGA+0x05 /* timing sequencer data */
#define PIXMASK IO_VGA+0x06 /* pixel write mask */
#define PALRADR IO_VGA+0x07 /* palette read address */
#define PALWADR IO_VGA+0x08 /* palette write address */
#define PALDATA IO_VGA+0x09 /* palette data register */
#define GDCIDX IO_VGA+0x0E /* graph data controller idx */
#define GDCREG IO_VGA+0x0F /* graph data controller data */
/* special characters */
#define cntlc 0x03
#define cntld 0x04
#define bs 0x08
#define lf 0x0a
#define cr 0x0d
#define del 0x7f
#define DEAD_CHAR 0x07 /* char used for cursor */
typedef struct term_stat {
int esc; /* processing escape sequence */
int num_param; /* # of parameters to ESC */
int last_param; /* last parameter # */
int param[MAX_ESC_PAR]; /* contains ESC parameters */
int cur_attr; /* current hardware attr word */
int attr_mask; /* current logical attr mask */
int cur_color; /* current hardware color */
int std_color; /* normal hardware color */
int rev_color; /* reverse hardware color */
} term_stat;
typedef struct scr_stat {
u_short *scr_buf; /* buffer when off screen */
int xpos; /* current X position */
int ypos; /* current Y position */
int saved_xpos; /* saved X position */
int saved_ypos; /* saved Y position */
int xsize; /* X text size */
int ysize; /* Y text size */
int xpixel; /* X graphics size */
int ypixel; /* Y graphics size */
int font_size; /* fontsize in Y direction */
int start; /* modified area start */
int end; /* modified area end */
term_stat term; /* terminal emulation stuff */
int status; /* status (bitfield) */
u_short *cursor_pos; /* cursor buffer position */
u_short *cursor_oldpos; /* cursor old buffer position */
u_short cursor_saveunder; /* saved chars under cursor */
char cursor_start; /* cursor start line # */
char cursor_end; /* cursor end line # */
u_short *mouse_pos; /* mouse buffer position */
u_short *mouse_oldpos; /* mouse old buffer position */
short mouse_xpos; /* mouse x coordinate */
short mouse_ypos; /* mouse y coordinate */
short mouse_buttons; /* mouse buttons */
u_char mouse_cursor[128]; /* mouse cursor bitmap store */
u_short *mouse_cut_start; /* mouse cut start pos */
u_short *mouse_cut_end; /* mouse cut end pos */
struct proc *mouse_proc; /* proc* of controlling proc */
pid_t mouse_pid; /* pid of controlling proc */
int mouse_signal; /* signal # to report with */
u_short bell_duration;
u_short bell_pitch;
u_char border; /* border color */
u_char mode; /* mode */
pid_t pid; /* pid of controlling proc */
struct proc *proc; /* proc* of controlling proc */
struct vt_mode smode; /* switch mode */
u_short *history; /* circular history buffer */
u_short *history_head; /* current head position */
u_short *history_pos; /* position shown on screen */
u_short *history_save; /* save area index */
int history_size; /* size of history buffer */
struct apmhook r_hook; /* reconfiguration support */
} scr_stat;
typedef struct default_attr {
int std_color; /* normal hardware color */
int rev_color; /* reverse hardware color */
} default_attr;
/* misc prototypes used by different syscons related LKM's */
void set_border(u_char color);
void set_mode(scr_stat *scp);
void copy_font(int operation, int font_type, char* font_image);
void load_palette(char *palette);
int add_scrn_saver(void (*this)(int));
int remove_scrn_saver(void (*this)(int));
#endif /* !_I386_ISA_SYSCONS_H_ */