Navdeep Parhar 1b3fc371b7 cxgbe(4): Add a flag to indicate that bits in interrupt cause but not in ... interrupt enable are not fatal. The firmware sets up all the interrupt enables based on run time configuration, which means the information in the enables is more accurate than what's compiled into the driver. This change also allows the fatal bits to be updated without any changes in the driver in some cases. MFC after: 1 week Sponsored by: Chelsio Communications		2019-04-02 18:50:33 +00:00
..
common	cxgbe(4): Add a flag to indicate that bits in interrupt cause but not in	2019-04-02 18:50:33 +00:00
crypto	Reject new sessions if the necessary queues aren't initialized.	2019-01-15 18:53:45 +00:00
cudbg	cxgbe(4): Fix unsafe mailbox access in cudbg.	2017-11-21 01:18:58 +00:00
cxgbei	Check for an allocation failure before dereferencing the pointer.	2018-11-26 22:42:52 +00:00
firmware	cxgbe(4): Treat the viid as an opaque identifier.	2019-03-20 17:27:11 +00:00
iw_cxgbe	iw_cxgbe: Remove unused smac_idx from the ep structure.	2019-03-19 19:11:44 +00:00
tom	cxgbe/t4_tom: Catch up with r344433, which removed tcb_autorcvbuf_inc.	2019-03-29 16:43:24 +00:00
adapter.h	cxgbe(4): Count and clear interrupts generated at the software's request.	2019-03-28 21:22:28 +00:00
if_cc.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_ccv.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_cxl.c
if_cxlv.c	Chelsio T4/T5 VF driver.	2016-09-07 18:13:57 +00:00
offload.h	cxgbe/t4_tom: Catch up with r344433, which removed tcb_autorcvbuf_inc.	2019-03-29 16:43:24 +00:00
osdep.h	cxgbe(4): Add adapter information to messages logged by the OS-agnostic	2019-01-29 00:49:12 +00:00
t4_clip.c	cxgbe(4): Do not issue mbox commands after t4_fw_bye.	2018-12-19 19:21:29 +00:00
t4_clip.h	Move CLIP table handling out of TOM and into the base driver.	2018-11-29 01:15:53 +00:00
t4_filter.c	cxgbe(4): Clear the reply-pending status of a hashfilter when the reply	2019-01-20 23:30:16 +00:00
t4_if.m
t4_ioctl.h	cxgbe(4): Allow "pass" filters to distribute matching traffic using a	2018-10-25 14:37:26 +00:00
t4_iov.c	cxgbe(4): Update the VF device ids too. This should have been part	2017-05-05 16:52:25 +00:00
t4_l2t.c	cxgbe(4): Reuse existing "switching" L2T entries when possible.	2018-09-22 01:24:30 +00:00
t4_l2t.h	cxgbe(4): Reuse existing "switching" L2T entries when possible.	2018-09-22 01:24:30 +00:00
t4_main.c	cxgbe/t4_tom: Catch up with r344433, which removed tcb_autorcvbuf_inc.	2019-03-29 16:43:24 +00:00
t4_mp_ring.c	cxgbe(4): Use fcmpset instead of cmpset when appropriate.	2018-08-23 16:24:27 +00:00
t4_mp_ring.h
t4_netmap.c	cxgbe: revert r309725	2018-11-28 15:29:58 +00:00
t4_sched.c	cxgbe(4): Treat the viid as an opaque identifier.	2019-03-20 17:27:11 +00:00
t4_sge.c	cxgbe(4): Count and clear interrupts generated at the software's request.	2019-03-28 21:22:28 +00:00
t4_smt.c	cxgbe(4): Move all control queues to the adapter.	2018-08-11 21:10:08 +00:00
t4_smt.h	cxgbe(4): Retire an old check.	2018-06-01 01:05:34 +00:00
t4_tracer.c	sys/dev: further adoption of SPDX licensing ID tags.	2017-11-27 14:52:40 +00:00
t4_vf.c	cxgbev(4): Enable 32b port capabilities in the VF driver.	2019-03-02 04:39:59 +00:00