freebsd-skq/sys/conf/Makefile.powerpc
imp 307c5832d7 Use ${.TARGET} rather than $@. i386 tested, pc98 untested because config
on my box doesn't grok machine type pc98.
PR:		3272
Submitted by:	jhs
1998-04-29 18:21:35 +00:00

243 lines
7.1 KiB
Makefile

# Makefile.i386 -- with config changes.
# Copyright 1990 W. Jolitz
# from: @(#)Makefile.i386 7.1 5/10/91
# $Id: Makefile.i386,v 1.109 1998/04/17 07:51:36 dima Exp $
#
# Makefile for FreeBSD
#
# This makefile is constructed from a machine description:
# config machineid
# Most changes should be made in the machine description
# /sys/i386/conf/``machineid''
# after which you should do
# config machineid
# Generic makefile changes should be made in
# /sys/i386/conf/Makefile.i386
# after which config should be rerun for all machines.
#
# Which version of config(8) is required.
%VERSREQ= 300003
BINFORMAT?= aout
#BINFORMAT?= aoutkld
#BINFORMAT?= elf
STD8X16FONT?= iso
.if exists(./@/.)
S= ./@
.else
S= ../..
.endif
I386= ${S}/i386
COPTFLAGS?=-O
INCLUDES= -nostdinc -I- -I. -I$S
# This hack is to allow kernel compiles to succeed on machines w/out srcdist
.if exists($S/../include)
INCLUDES+= -I$S/../include
.else
INCLUDES+= -I/usr/include
.endif
COPTS= ${INCLUDES} ${IDENT} -DKERNEL -include opt_global.h
CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS}
LOAD_ADDRESS?= F0100000
DEFINED_PROF= ${PROF}
.if defined(PROF)
CFLAGS+= -malign-functions=4
.if ${PROFLEVEL} >= 2
IDENT+= -DGPROF4 -DGUPROF
PROF+= -mprofiler-epilogue
.endif
.endif
NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
# XXX LOCORE means "don't declare C stuff" not "for locore.s".
NORMAL_S= ${CC} -c -x assembler-with-cpp -DLOCORE ${COPTS} $<
DRIVER_C= ${CC} -c ${CFLAGS} ${PROF} $<
DRIVER_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
DRIVER_S= ${CC} -c -x assembler-with-cpp -DLOCORE ${COPTS} $<
PROFILE_C= ${CC} -c ${CFLAGS} ${PARAM} $<
# ${I386}/i386/setdef0.c and ${I386}/i386/setdef1.c are intentionally
# omitted from SYSTEM_CFILES. They depend on setdefs.h, a header which
# is generated from all of ${OBJS}. We don't want to have to compile
# everything just to do a make depend.
SYSTEM_CFILES= ioconf.c param.c vnode_if.c config.c
SYSTEM_SFILES= ${I386}/i386/locore.s
SYSTEM_DEP= Makefile symbols.exclude symbols.sort ${SYSTEM_OBJS}
.if ${CFLAGS:M-g} == ""
SYMORDER_EXCLUDE=-x symbols.exclude
.endif
SYSTEM_LD_HEAD= @echo loading ${.TARGET}; rm -f ${.TARGET}
.if ${BINFORMAT} == aout
SYSTEM_OBJS= locore.o vnode_if.o ${OBJS} ioconf.o param.o config.o
SYSTEM_LD= @${LD} -Bstatic -Z -T ${LOAD_ADDRESS} -o ${.TARGET} -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @echo rearranging symbols; \
symorder -m ${SYMORDER_EXCLUDE} symbols.sort ${.TARGET}; \
size ${.TARGET} ; chmod 755 ${.TARGET}
.endif
.if ${BINFORMAT} == aoutkld
SYSTEM_OBJS= locore.o vnode_if.o ${OBJS} ioconf.o param.o config.o
SYSTEM_LD= @${LD} -Bforcedynamic -Z -T ${LOAD_ADDRESS} -o ${.TARGET} -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @echo rearranging symbols; \
symorder -m ${SYMORDER_EXCLUDE} symbols.sort ${.TARGET}; \
size ${.TARGET} ; chmod 755 ${.TARGET}
.endif
.if ${BINFORMAT} == elf
SYSTEM_OBJS= locore.o setdef0.o vnode_if.o ${OBJS} ioconf.o param.o config.o \
setdef1.o
SYSTEM_LD= @${LD} -Bstatic -Ttext ${LOAD_ADDRESS} -e btext -defsym _DYNAMIC=0 \
-o ${.TARGET} -X ${SYSTEM_OBJS} vers.o
SYSTEM_LD_TAIL= @size ${.TARGET} ; chmod 755 ${.TARGET}
.endif
%BEFORE_DEPEND
%OBJS
%CFILES
%SFILES
%LOAD
%CLEAN
clean:
rm -f *.o *.s eddep errs genassym gensetdefs kernel linterrs \
makelinks param.c setdefs.h symbols.exclude symbols.sort tags \
vers.c vnode_if.c vnode_if.h ${CLEAN}
#lint: /tmp param.c
# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} \
# ${I386}/i386/Locore.c ${CFILES} ioconf.c param.c | \
# grep -v 'struct/union .* never defined' | \
# grep -v 'possible pointer alignment problem'
symbols.exclude: Makefile
echo "gcc2_compiled." >symbols.exclude
echo "___gnu_compiled_c" >>symbols.exclude
symbols.sort: ${I386}/i386/symbols.raw
grep -v '^#' ${I386}/i386/symbols.raw \
| sed 's/^ //' | sort -u > symbols.sort
locore.o: ${I386}/i386/locore.s assym.s
${NORMAL_S}
setdef0.o: ${I386}/i386/setdef0.c setdefs.h
${NORMAL_C}
setdef1.o: ${I386}/i386/setdef1.c setdefs.h
${NORMAL_C}
setdefs.h: gensetdefs ${OBJS}
./gensetdefs ${OBJS} >setdefs.h
gensetdefs: gensetdefs.o
${CC} ${CFLAGS} gensetdefs.o -o ${.TARGET}
gensetdefs.o: ${I386}/i386/gensetdefs.c
${CC} -c ${CFLAGS} ${I386}/i386/gensetdefs.c
# everything potentially depends on the Makefile since everything potentially
# depends on the options. Some things are more dependent on the Makefile for
# historical reasons.
machdep.o: Makefile
# the following is necessary because autoconf.o depends on #if GENERIC
autoconf.o: Makefile
# XXX - may no longer be needed
locore.o: Makefile
# depends on KDB (cons.o also depends on GENERIC)
trap.o cons.o: Makefile
# this rule stops ./assym.s in .depend from causing problems
./assym.s: assym.s
assym.s: genassym
./genassym >assym.s
# Some of the defines that genassym outputs may well depend on the
# value of kernel options.
genassym.o: ${I386}/i386/genassym.c Makefile opt_global.h opt_vm86.h
${CC} -c ${CFLAGS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c
genassym: genassym.o
${CC} ${CFLAGS} ${PARAM} genassym.o -o ${.TARGET}
${OBJS}: opt_global.h
# XXX this assumes that the options for NORMAL_C* and DRIVER_C* are identical.
depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND}
rm -f .newdep
mkdep -a -f .newdep ${COPTS} ${CFILES} ${SYSTEM_CFILES}
mkdep -a -f .newdep ${COPTS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c
MKDEP_CPP="${CC} -E -x assembler-with-cpp" ; export MKDEP_CPP ; \
mkdep -a -f .newdep -DLOCORE ${COPTS} ${SFILES} ${SYSTEM_SFILES}
rm -f .depend
mv -f .newdep .depend
cleandepend:
rm -f .depend
links:
egrep '#if' ${CFILES:Nswapkernel.c} | sed -f $S/conf/defines | \
sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
echo ${CFILES:Nswapkernel.c} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
sort -u | comm -23 - dontlink | \
sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
sh makelinks && rm -f dontlink
tags:
@echo "see $S/kern/Makefile for tags"
install:
@if [ ! -f kernel ] ; then \
echo "You must first build your kernel before trying to install." ; \
exit 1 ; \
fi
.if exists(${DESTDIR}/kernel)
chflags noschg ${DESTDIR}/kernel
mv ${DESTDIR}/kernel ${DESTDIR}/kernel.old
.endif
PATH=$${PATH}:/sbin:/usr/sbin; \
if [ `sysctl -n kern.bootfile` = ${DESTDIR}/kernel ] ; then \
sysctl -w kern.bootfile=${DESTDIR}/kernel.old ; \
if [ -f /var/db/kvm_kernel.db ] ; then \
mv -f /var/db/kvm_kernel.db /var/db/kvm_kernel.old.db ; \
fi \
fi
install -c -m 555 -o root -g wheel -fschg kernel ${DESTDIR}/
ioconf.o: ioconf.c $S/sys/param.h $S/sys/buf.h \
${I386}/isa/isa_device.h ${I386}/isa/isa.h ${I386}/isa/icu.h
${CC} -c ${CFLAGS} ioconf.c
param.c: $S/conf/param.c
-rm -f param.c
cp $S/conf/param.c .
param.o: param.c Makefile
${CC} -c ${CFLAGS} ${PARAM} param.c
vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT}
${CC} ${CFLAGS} -c vers.c
vnode_if.c: $S/kern/vnode_if.sh $S/kern/vnode_if.src
sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src
sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
.include <bsd.kern.mk>
%RULES
# DO NOT DELETE THIS LINE -- make depend uses it