freebsd-skq/sys/dev/usb/umodem.c
julian 5596676e6c KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00

1239 lines
29 KiB
C

/* $NetBSD: umodem.c,v 1.5 1999/01/08 11:58:25 augustss Exp $ */
/* $FreeBSD$ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Comm Class spec: http://www.usb.org/developers/data/usbcdc11.pdf
*/
/*
* TODO:
* - Add error recovery in various places; the big problem is what
* to do in a callback if there is an error.
* - Implement a Call Device for modems without multiplexed commands.
*
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <sys/device.h>
#include <sys/ioctl.h>
#elif defined(__FreeBSD__)
#include <sys/bus.h>
#include <sys/ioccom.h>
#include <sys/fcntl.h>
#endif
#include <sys/conf.h>
#include <sys/tty.h>
#include <sys/clist.h>
#include <sys/file.h>
#if __FreeBSD_version >= 500014
#include <sys/selinfo.h>
#else
#include <sys/select.h>
#endif
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/poll.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbcdc.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>
#include <dev/usb/usb_quirks.h>
#include <dev/usb/usbdevs.h>
#ifdef UMODEM_DEBUG
#define DPRINTF(x) if(umodemdebug) logprintf x
#define DPRINTFN(n, x) if(umodemdebug > (n)) logprintf x
int umodemdebug = 1;
#else
#define DPRINTF(x)
#define DPRINTFN(n, x)
#endif
/* Macros to clear/set/test flags. */
#define SET(t, f) (t) |= (f)
#define CLR(t, f) (t) &= ~((unsigned)(f))
#define ISSET(t, f) ((t) & (f))
#define UMODEMUNIT_MASK 0x3ffff
#define UMODEMDIALOUT_MASK 0x80000
#define UMODEMCALLUNIT_MASK 0x40000
#define UMODEMUNIT(x) (minor(x) & UMODEMUNIT_MASK)
#define UMODEMDIALOUT(x) (minor(x) & UMODEMDIALOUT_MASK)
#define UMODEMCALLUNIT(x) (minor(x) & UMODEMCALLUNIT_MASK)
#define UMODEMIBUFSIZE 64
struct umodem_softc {
USBBASEDEVICE sc_dev; /* base device */
usbd_device_handle sc_udev; /* USB device */
int sc_ctl_iface_no;
usbd_interface_handle sc_ctl_iface; /* control interface */
int sc_data_iface_no;
usbd_interface_handle sc_data_iface; /* data interface */
int sc_bulkin_no; /* bulk in endpoint address */
usbd_pipe_handle sc_bulkin_pipe; /* bulk in pipe */
usbd_xfer_handle sc_ixfer; /* read request */
u_char *sc_ibuf; /* read buffer */
int sc_bulkout_no; /* bulk out endpoint address */
usbd_pipe_handle sc_bulkout_pipe;/* bulk out pipe */
usbd_xfer_handle sc_oxfer; /* read request */
int sc_cm_cap; /* CM capabilities */
int sc_acm_cap; /* ACM capabilities */
int sc_cm_over_data;
struct tty *sc_tty; /* our tty */
usb_cdc_line_state_t sc_line_state; /* current line state */
u_char sc_dtr; /* current DTR state */
u_char sc_opening; /* lock during open */
u_char sc_dying; /* disconnecting */
#if defined(__FreeBSD__)
dev_t dev; /* special device node */
#endif
};
#if defined(__NetBSD__) || defined(__OpenBSD__)
cdev_decl(umodem);
#elif defined(__FreeBSD__)
d_open_t umodemopen;
d_close_t umodemclose;
d_read_t umodemread;
d_write_t umodemwrite;
d_ioctl_t umodemioctl;
#define UMODEM_CDEV_MAJOR 124
static struct cdevsw umodem_cdevsw = {
/* open */ umodemopen,
/* close */ umodemclose,
/* read */ umodemread,
/* write */ umodemwrite,
/* ioctl */ umodemioctl,
/* poll */ ttypoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "umodem",
/* maj */ UMODEM_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ D_TTY | D_KQFILTER,
/* kqfilter */ ttykqfilter,
};
#endif
void *umodem_get_desc
(usbd_device_handle dev, int type, int subtype);
usbd_status umodem_set_comm_feature
(struct umodem_softc *sc, int feature, int state);
usbd_status umodem_set_line_coding
(struct umodem_softc *sc, usb_cdc_line_state_t *state);
void umodem_get_caps (usbd_device_handle, int *, int *);
void umodem_cleanup (struct umodem_softc *);
int umodemparam (struct tty *, struct termios *);
void umodemstart (struct tty *);
void umodemstop (struct tty *, int);
struct tty * umodemtty (dev_t dev);
void umodem_shutdown (struct umodem_softc *);
void umodem_modem (struct umodem_softc *, int);
void umodem_break (struct umodem_softc *, int);
usbd_status umodemstartread (struct umodem_softc *);
void umodemreadcb (usbd_xfer_handle, usbd_private_handle,
usbd_status status);
void umodemwritecb (usbd_xfer_handle, usbd_private_handle,
usbd_status status);
USB_DECLARE_DRIVER(umodem);
USB_MATCH(umodem)
{
USB_MATCH_START(umodem, uaa);
usb_interface_descriptor_t *id;
int cm, acm;
if (!uaa->iface)
return (UMATCH_NONE);
id = usbd_get_interface_descriptor(uaa->iface);
if (id == 0 ||
id->bInterfaceClass != UCLASS_CDC ||
id->bInterfaceSubClass != USUBCLASS_ABSTRACT_CONTROL_MODEL ||
id->bInterfaceProtocol != UPROTO_CDC_AT)
return (UMATCH_NONE);
umodem_get_caps(uaa->device, &cm, &acm);
if (!(cm & USB_CDC_CM_DOES_CM) ||
!(cm & USB_CDC_CM_OVER_DATA) ||
!(acm & USB_CDC_ACM_HAS_LINE))
return (UMATCH_NONE);
return (UMATCH_IFACECLASS_IFACESUBCLASS_IFACEPROTO);
}
USB_ATTACH(umodem)
{
USB_ATTACH_START(umodem, sc, uaa);
usbd_device_handle dev = uaa->device;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usb_cdc_cm_descriptor_t *cmd;
char devinfo[1024];
usbd_status err;
int data_ifaceno;
int i;
struct tty *tp;
usbd_devinfo(uaa->device, 0, devinfo);
USB_ATTACH_SETUP;
sc->sc_udev = dev;
sc->sc_ctl_iface = uaa->iface;
id = usbd_get_interface_descriptor(sc->sc_ctl_iface);
printf("%s: %s, iclass %d/%d\n", USBDEVNAME(sc->sc_dev),
devinfo, id->bInterfaceClass, id->bInterfaceSubClass);
sc->sc_ctl_iface_no = id->bInterfaceNumber;
umodem_get_caps(dev, &sc->sc_cm_cap, &sc->sc_acm_cap);
/* Get the data interface no. */
cmd = umodem_get_desc(dev, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
if (!cmd) {
DPRINTF(("%s: no CM desc\n", USBDEVNAME(sc->sc_dev)));
goto bad;
}
sc->sc_data_iface_no = data_ifaceno = cmd->bDataInterface;
printf("%s: data interface %d, has %sCM over data, has %sbreak\n",
USBDEVNAME(sc->sc_dev), data_ifaceno,
sc->sc_cm_cap & USB_CDC_CM_OVER_DATA ? "" : "no ",
sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK ? "" : "no ");
/* Get the data interface too. */
for (i = 0; i < uaa->nifaces; i++) {
if (uaa->ifaces[i]) {
id = usbd_get_interface_descriptor(uaa->ifaces[i]);
if (id->bInterfaceNumber == data_ifaceno) {
sc->sc_data_iface = uaa->ifaces[i];
uaa->ifaces[i] = 0;
}
}
}
if (!sc->sc_data_iface) {
printf("%s: no data interface\n", USBDEVNAME(sc->sc_dev));
goto bad;
}
/*
* Find the bulk endpoints.
* Iterate over all endpoints in the data interface and take note.
*/
sc->sc_bulkin_no = sc->sc_bulkout_no = -1;
id = usbd_get_interface_descriptor(sc->sc_data_iface);
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_data_iface, i);
if (!ed) {
printf("%s: no endpoint descriptor for %d\n",
USBDEVNAME(sc->sc_dev), i);
goto bad;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
sc->sc_bulkin_no = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
sc->sc_bulkout_no = ed->bEndpointAddress;
}
}
if (sc->sc_bulkin_no == -1) {
DPRINTF(("%s: Could not find data bulk in\n",
USBDEVNAME(sc->sc_dev)));
goto bad;
}
if (sc->sc_bulkout_no == -1) {
DPRINTF(("%s: Could not find data bulk out\n",
USBDEVNAME(sc->sc_dev)));
goto bad;
}
if (usbd_get_quirks(sc->sc_udev)->uq_flags & UQ_ASSUME_CM_OVER_DATA) {
sc->sc_cm_over_data = 1;
} else {
if (sc->sc_cm_cap & USB_CDC_CM_OVER_DATA) {
err = umodem_set_comm_feature(sc, UCDC_ABSTRACT_STATE,
UCDC_DATA_MULTIPLEXED);
if (err)
goto bad;
sc->sc_cm_over_data = 1;
}
}
#if defined(__NetBSD__) || defined(__OpenBSD__)
sc->sc_tty = tp = ttymalloc();
#elif defined(__FreeBSD__)
sc->sc_tty = tp = ttymalloc(sc->sc_tty);
#endif
tp->t_oproc = umodemstart;
tp->t_param = umodemparam;
tp->t_stop = umodemstop;
DPRINTF(("umodem_attach: tty_attach %p\n", tp));
#if defined(__NetBSD__) || defined(__OpenBSD__)
tty_attach(tp);
#endif
#if defined(__FreeBSD__)
DPRINTF(("umodem_attach: make_dev: umodem%d\n", device_get_unit(self)));
sc->dev = make_dev(&umodem_cdevsw, device_get_unit(self),
UID_UUCP, GID_DIALER, 0660,
"umodem%d", device_get_unit(self));
sc->dev->si_tty = tp;
#endif
sc->sc_dtr = -1;
USB_ATTACH_SUCCESS_RETURN;
bad:
DPRINTF(("umodem_attach: BAD -> DYING\n"));
sc->sc_dying = 1;
USB_ATTACH_ERROR_RETURN;
}
void
umodem_get_caps(dev, cm, acm)
usbd_device_handle dev;
int *cm, *acm;
{
usb_cdc_cm_descriptor_t *cmd;
usb_cdc_acm_descriptor_t *cad;
*cm = *acm = 0;
cmd = umodem_get_desc(dev, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
if (!cmd) {
DPRINTF(("umodem_get_desc: no CM desc\n"));
return;
}
*cm = cmd->bmCapabilities;
cad = umodem_get_desc(dev, UDESC_CS_INTERFACE, UDESCSUB_CDC_ACM);
if (!cad) {
DPRINTF(("umodem_get_desc: no ACM desc\n"));
return;
}
*acm = cad->bmCapabilities;
}
void
umodemstart(tp)
struct tty *tp;
{
struct umodem_softc *sc;
struct cblock *cbp;
int s;
u_char *data;
int cnt;
USB_GET_SC(umodem, UMODEMUNIT(tp->t_dev), sc);
if (sc->sc_dying)
return;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) {
ttwwakeup(tp);
DPRINTFN(4,("umodemstart: stopped\n"));
goto out;
}
#if defined(__NetBSD__) || defined(__OpenBSD__)
if (tp->t_outq.c_cc <= tp->t_lowat) {
if (ISSET(tp->t_state, TS_ASLEEP)) {
CLR(tp->t_state, TS_ASLEEP);
wakeup(&tp->t_outq);
}
selwakeup(&tp->t_wsel);
if (tp->t_outq.c_cc == 0)
goto out;
}
#elif defined(__FreeBSD__)
if (tp->t_outq.c_cc <= tp->t_olowat) {
if (ISSET(tp->t_state, TS_SO_OLOWAT)) {
CLR(tp->t_state, TS_SO_OLOWAT);
wakeup(TSA_OLOWAT(tp));
}
selwakeup(&tp->t_wsel);
if (tp->t_outq.c_cc == 0) {
if (ISSET(tp->t_state, TS_BUSY | TS_SO_OCOMPLETE) ==
TS_SO_OCOMPLETE && tp->t_outq.c_cc == 0) {
CLR(tp->t_state, TS_SO_OCOMPLETE);
wakeup(TSA_OCOMPLETE(tp));
}
goto out;
}
}
#endif
/* Grab the first contiguous region of buffer space. */
data = tp->t_outq.c_cf;
#if defined(__NetBSD__) || defined(__OpenBSD__)
cnt = ndqb(&tp->t_outq, 0);
#elif defined(__FreeBSD__)
cbp = (struct cblock *) ((intptr_t) tp->t_outq.c_cf & ~CROUND);
cnt = min((char *) (cbp+1) - tp->t_outq.c_cf, tp->t_outq.c_cc);
#endif
if (cnt == 0) {
DPRINTF(("umodemstart: cnt==0\n"));
splx(s);
return;
}
SET(tp->t_state, TS_BUSY);
DPRINTFN(4,("umodemstart: %d chars\n", cnt));
/* XXX what can we do on error? */
usbd_setup_xfer(sc->sc_oxfer, sc->sc_bulkout_pipe,
(usbd_private_handle)sc, data, cnt,
0, USBD_NO_TIMEOUT, umodemwritecb);
(void)usbd_transfer(sc->sc_oxfer);
ttwwakeup(tp);
out:
splx(s);
}
void
umodemwritecb(xfer, priv, status)
usbd_xfer_handle xfer;
usbd_private_handle priv;
usbd_status status;
{
struct umodem_softc *sc = (struct umodem_softc *)priv;
struct tty *tp = sc->sc_tty;
u_int32_t cc;
int s;
DPRINTFN(5,("umodemwritecb: status=%d\n", status));
if (status == USBD_CANCELLED)
return;
if (status != USBD_NORMAL_COMPLETION) {
DPRINTF(("umodemwritecb: status=%d\n", status));
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->sc_bulkin_pipe);
/* XXX we should restart after some delay. */
return;
}
usbd_get_xfer_status(xfer, 0, 0, &cc, 0);
DPRINTFN(5,("umodemwritecb: cc=%d\n", cc));
s = spltty();
CLR(tp->t_state, TS_BUSY);
if (ISSET(tp->t_state, TS_FLUSH))
CLR(tp->t_state, TS_FLUSH);
else
ndflush(&tp->t_outq, cc);
(*linesw[tp->t_line].l_start)(tp);
splx(s);
}
int
umodemparam(tp, t)
struct tty *tp;
struct termios *t;
{
struct umodem_softc *sc;
usb_cdc_line_state_t ls;
USB_GET_SC(umodem, UMODEMUNIT(tp->t_dev), sc);
if (sc->sc_dying)
return (EIO);
/* Check requested parameters. */
if (t->c_ospeed < 0)
return (EINVAL);
if (t->c_ispeed && t->c_ispeed != t->c_ospeed)
return (EINVAL);
/*
* If there were no changes, don't do anything. This avoids dropping
* input and improves performance when all we did was frob things like
* VMIN and VTIME.
*/
if (tp->t_ospeed == t->c_ospeed &&
tp->t_cflag == t->c_cflag)
return (0);
/* And copy to tty. */
tp->t_ispeed = 0;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = t->c_cflag;
USETDW(ls.dwDTERate, t->c_ospeed);
if (ISSET(t->c_cflag, CSTOPB))
ls.bCharFormat = UCDC_STOP_BIT_2;
else
ls.bCharFormat = UCDC_STOP_BIT_1;
if (ISSET(t->c_cflag, PARENB)) {
if (ISSET(t->c_cflag, PARODD))
ls.bParityType = UCDC_PARITY_ODD;
else
ls.bParityType = UCDC_PARITY_EVEN;
} else
ls.bParityType = UCDC_PARITY_NONE;
switch (ISSET(t->c_cflag, CSIZE)) {
case CS5:
ls.bDataBits = 5;
break;
case CS6:
ls.bDataBits = 6;
break;
case CS7:
ls.bDataBits = 7;
break;
case CS8:
ls.bDataBits = 8;
break;
}
/* XXX what can we if it fails? */
(void)umodem_set_line_coding(sc, &ls);
/*
* Update the tty layer's idea of the carrier bit, in case we changed
* CLOCAL or MDMBUF. We don't hang up here; we only do that by
* explicit request.
*/
(void) (*linesw[tp->t_line].l_modem)(tp, 1 /* XXX carrier */ );
return (0);
}
int
umodemopen(dev, flag, mode, td)
dev_t dev;
int flag, mode;
struct thread *td;
{
int unit = UMODEMUNIT(dev);
struct umodem_softc *sc;
usbd_status err;
struct tty *tp;
int s;
int error;
USB_GET_SC_OPEN(umodem, unit, sc);
if (sc->sc_dying)
return (EIO);
#if defined(__NetBSD__) || defined(__OpenBBSD__)
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
return (ENXIO);
#endif
tp = sc->sc_tty;
DPRINTF(("%s: umodemopen: tp=%p\n", USBDEVNAME(sc->sc_dev), tp));
if (ISSET(tp->t_state, TS_ISOPEN) &&
ISSET(tp->t_state, TS_XCLUDE) &&
suser_td(td))
return (EBUSY);
/*
* Do the following iff this is a first open.
*/
s = spltty();
while (sc->sc_opening)
tsleep(&sc->sc_opening, PRIBIO, "umdmop", 0);
sc->sc_opening = 1;
#if defined(__NetBSD__) || defined(__OpenBSD__)
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
#elif defined(__FreeBSD__)
if (!ISSET(tp->t_state, TS_ISOPEN)) {
#endif
struct termios t;
tp->t_dev = dev;
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
/* Make sure umodemparam() will do something. */
tp->t_ospeed = 0;
(void) umodemparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
umodem_modem(sc, 1);
DPRINTF(("umodemopen: open pipes\n"));
/* Open the bulk pipes */
err = usbd_open_pipe(sc->sc_data_iface, sc->sc_bulkin_no, 0,
&sc->sc_bulkin_pipe);
if (err) {
DPRINTF(("%s: cannot open bulk out pipe (addr %d)\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkin_no));
return (EIO);
}
err = usbd_open_pipe(sc->sc_data_iface, sc->sc_bulkout_no,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
DPRINTF(("%s: cannot open bulk in pipe (addr %d)\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkout_no));
usbd_close_pipe(sc->sc_bulkin_pipe);
return (EIO);
}
/* Allocate a request and an input buffer and start reading. */
sc->sc_ixfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_ixfer == 0) {
usbd_close_pipe(sc->sc_bulkin_pipe);
usbd_close_pipe(sc->sc_bulkout_pipe);
return (ENOMEM);
}
sc->sc_oxfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_oxfer == 0) {
usbd_close_pipe(sc->sc_bulkin_pipe);
usbd_close_pipe(sc->sc_bulkout_pipe);
usbd_free_xfer(sc->sc_ixfer);
return (ENOMEM);
}
sc->sc_ibuf = malloc(UMODEMIBUFSIZE, M_USBDEV, M_WAITOK);
umodemstartread(sc);
}
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
#if defined(__NetBSD__) || defined(__OpenBSD__)
error = ttyopen(tp, UMODEMDIALOUT(dev), ISSET(flag, O_NONBLOCK));
if (error)
goto bad;
#elif defined(__FreeBSD__)
error = ttyopen(dev, tp);
if (error)
goto bad;
#endif
error = (*linesw[tp->t_line].l_open)(dev, tp);
if (error)
goto bad;
return (0);
bad:
#if defined(__NetBSD__) || defined(__OpenBSD__)
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
#elif defined(__FreeBSD__)
if (!ISSET(tp->t_state, TS_ISOPEN)) {
#endif
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
umodem_cleanup(sc);
}
return (error);
}
usbd_status
umodemstartread(sc)
struct umodem_softc *sc;
{
usbd_status err;
DPRINTFN(5,("umodemstartread: start\n"));
usbd_setup_xfer(sc->sc_ixfer, sc->sc_bulkin_pipe,
(usbd_private_handle)sc,
sc->sc_ibuf, UMODEMIBUFSIZE, USBD_SHORT_XFER_OK,
USBD_NO_TIMEOUT, umodemreadcb);
err = usbd_transfer(sc->sc_ixfer);
if (err != USBD_IN_PROGRESS)
return (err);
return (USBD_NORMAL_COMPLETION);
}
void
umodemreadcb(xfer, p, status)
usbd_xfer_handle xfer;
usbd_private_handle p;
usbd_status status;
{
struct umodem_softc *sc = (struct umodem_softc *)p;
struct tty *tp = sc->sc_tty;
int (*rint) (int c, struct tty *tp) = linesw[tp->t_line].l_rint;
usbd_status err;
u_int32_t cc;
u_char *cp;
int s;
if (status == USBD_CANCELLED)
return;
if (status != USBD_NORMAL_COMPLETION) {
DPRINTF(("umodemreadcb: status=%d\n", status));
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->sc_bulkin_pipe);
/* XXX we should restart after some delay. */
return;
}
usbd_get_xfer_status(xfer, 0, (void **)&cp, &cc, 0);
DPRINTFN(5,("umodemreadcb: got %d chars, tp=%p\n", cc, tp));
s = spltty();
/* Give characters to tty layer. */
while (cc-- > 0) {
DPRINTFN(7,("umodemreadcb: char=0x%02x\n", *cp));
if ((*rint)(*cp++, tp) == -1) {
/* XXX what should we do? */
break;
}
}
splx(s);
err = umodemstartread(sc);
if (err) {
printf("%s: read start failed\n", USBDEVNAME(sc->sc_dev));
/* XXX what should we dow now? */
}
}
int
umodemclose(dev, flag, mode, td)
dev_t dev;
int flag, mode;
struct thread *td;
{
struct umodem_softc *sc;
struct tty *tp;
int s;
USB_GET_SC(umodem, UMODEMUNIT(dev), sc);
tp = sc->sc_tty;
DPRINTF(("%s: umodemclose sc_tty=%p\n", USBDEVNAME(sc->sc_dev), tp));
if (!ISSET(tp->t_state, TS_ISOPEN))
return (0);
DPRINTF(("%s: umodemclose lclose(%p,%d)\n", USBDEVNAME(sc->sc_dev), tp,flag));
s=spltty();
DPRINTF(("%s: umodemclose lclose=%p\n", USBDEVNAME(sc->sc_dev), linesw[tp->t_line].l_close));
(*linesw[tp->t_line].l_close)(tp, flag);
DPRINTF(("%s: umodemclose ttyclose(%p)\n", USBDEVNAME(sc->sc_dev), tp));
ttyclose(tp);
splx(s);
DPRINTF(("%s: umodemclose sc->sc_dying=%d\n", USBDEVNAME(sc->sc_dev), sc->sc_dying));
if (sc->sc_dying)
return (0);
DPRINTF(("%s: umodemclose tp->t_state=%d\n", USBDEVNAME(sc->sc_dev), tp->t_state));
#if defined(__NetBSD__) || defined(__OpenBSD__)
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
#elif defined(__FreeBSD__)
if (!ISSET(tp->t_state, TS_ISOPEN)) {
#endif
/*
* Although we got a last close, the device may still be in
* use; e.g. if this was the dialout node, and there are still
* processes waiting for carrier on the non-dialout node.
*/
DPRINTF(("%s: umodemclose umodem_cleanup(%p)\n", USBDEVNAME(sc->sc_dev), sc));
umodem_cleanup(sc);
}
DPRINTF(("%s: umodemclose return\n", USBDEVNAME(sc->sc_dev)));
return (0);
}
void
umodem_cleanup(sc)
struct umodem_softc *sc;
{
umodem_shutdown(sc);
DPRINTFN(5, ("%s: umodem_cleanup: closing pipes\n",
USBDEVNAME(sc->sc_dev)));
usbd_abort_pipe(sc->sc_bulkin_pipe);
usbd_close_pipe(sc->sc_bulkin_pipe);
usbd_abort_pipe(sc->sc_bulkout_pipe);
usbd_close_pipe(sc->sc_bulkout_pipe);
usbd_free_xfer(sc->sc_ixfer);
usbd_free_xfer(sc->sc_oxfer);
free(sc->sc_ibuf, M_USBDEV);
}
int
umodemread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct umodem_softc *sc;
struct tty *tp;
USB_GET_SC(umodem, UMODEMUNIT(dev), sc);
tp = sc->sc_tty;
if (sc->sc_dying)
return (EIO);
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
}
int
umodemwrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct umodem_softc *sc;
struct tty *tp;
USB_GET_SC(umodem, UMODEMUNIT(dev), sc);
tp = sc->sc_tty;
if (sc->sc_dying)
return (EIO);
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
void
umodemstop(tp, flag)
struct tty *tp;
int flag;
{
struct umodem_softc *sc;
int s;
USB_GET_SC(umodem, UMODEMUNIT(tp->t_dev), sc);
DPRINTF(("umodemstop: %d\n", flag));
s = spltty();
if (ISSET(tp->t_state, TS_BUSY)) {
DPRINTF(("umodemstop: XXX\n"));
/* XXX do what? */
if (!ISSET(tp->t_state, TS_TTSTOP))
SET(tp->t_state, TS_FLUSH);
}
splx(s);
}
struct tty *
umodemtty(dev)
dev_t dev;
{
struct umodem_softc *sc;
struct tty *tp;
USB_GET_SC(umodem, UMODEMUNIT(dev), sc);
tp = sc->sc_tty;
return (tp);
}
int
umodemioctl(dev, cmd, data, flag, td)
dev_t dev;
u_long cmd;
caddr_t data;
int flag;
struct thread *td;
{
struct umodem_softc *sc;
struct tty *tp;
int error;
int s;
int bits;
USB_GET_SC(umodem, UMODEMUNIT(dev), sc);
tp = sc->sc_tty;
if (sc->sc_dying)
return (EIO);
DPRINTF(("umodemioctl: cmd=0x%08lx\n", cmd));
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, td);
if (error >= 0)
return (error);
#if defined(__NetBSD__) || defined(__OpenBSD__)
error = ttioctl(tp, cmd, data, flag, td);
#elif defined(__FreeBSD__)
error = ttioctl(tp, cmd, data, flag);
#endif
if (error >= 0)
return (error);
DPRINTF(("umodemioctl: our cmd=0x%08lx\n", cmd));
s = spltty();
switch (cmd) {
case TIOCSBRK:
umodem_break(sc, 1);
break;
case TIOCCBRK:
umodem_break(sc, 0);
break;
case TIOCSDTR:
umodem_modem(sc, 1);
break;
case TIOCCDTR:
umodem_modem(sc, 0);
break;
case TIOCMGET:
bits = TIOCM_LE;
if(sc->sc_dtr)
bits |= TIOCM_DTR;
*(int *)data = bits;
break;
case TIOCMSET:
break;
case USB_GET_CM_OVER_DATA:
*(int *)data = sc->sc_cm_over_data;
break;
case USB_SET_CM_OVER_DATA:
if (*(int *)data != sc->sc_cm_over_data) {
/* XXX change it */
}
break;
default:
DPRINTF(("umodemioctl: unknown\n"));
error = ENOTTY;
splx(s);
return (error);
}
splx(s);
return(0);
}
void
umodem_shutdown(sc)
struct umodem_softc *sc;
{
struct tty *tp = sc->sc_tty;
DPRINTF(("%s: umodem_shutdown\n", USBDEVNAME(sc->sc_dev)));
/*
* Hang up if necessary. Wait a bit, so the other side has time to
* notice even if we immediately open the port again.
*/
if (ISSET(tp->t_cflag, HUPCL)) {
umodem_modem(sc, 0);
#if defined(__NetBSD__) || defined(__OpenBSD__)
(void) tsleep(sc, TTIPRI, ttclos, hz);
#elif defined(__FreeBSD__)
(void) tsleep(sc, TTIPRI, "umdmsd", hz);
#endif
}
}
void
umodem_modem(sc, onoff)
struct umodem_softc *sc;
int onoff;
{
usb_device_request_t req;
DPRINTF(("%s: umodem_modem: onoff=%d\n", USBDEVNAME(sc->sc_dev),onoff));
if (sc->sc_dtr == onoff)
return;
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
USETW(req.wValue, onoff ? UCDC_LINE_DTR : 0);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, 0);
(void)usbd_do_request(sc->sc_udev, &req, 0);
sc->sc_dtr = onoff;
}
void
umodem_break(sc, onoff)
struct umodem_softc *sc;
int onoff;
{
usb_device_request_t req;
DPRINTF(("%s: umodem_break: onoff=%d\n", USBDEVNAME(sc->sc_dev),onoff));
if (!(sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK))
return;
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SEND_BREAK;
USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, 0);
(void)usbd_do_request(sc->sc_udev, &req, 0);
}
void *
umodem_get_desc(dev, type, subtype)
usbd_device_handle dev;
int type;
int subtype;
{
usb_descriptor_t *desc;
usb_config_descriptor_t *cd = usbd_get_config_descriptor(dev);
uByte *p = (uByte *)cd;
uByte *end = p + UGETW(cd->wTotalLength);
while (p < end) {
desc = (usb_descriptor_t *)p;
if (desc->bDescriptorType == type &&
desc->bDescriptorSubtype == subtype)
return (desc);
p += desc->bLength;
}
return (0);
}
usbd_status
umodem_set_comm_feature(sc, feature, state)
struct umodem_softc *sc;
int feature;
int state;
{
usb_device_request_t req;
usbd_status err;
usb_cdc_abstract_state_t ast;
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SET_COMM_FEATURE;
USETW(req.wValue, feature);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, UCDC_ABSTRACT_STATE_LENGTH);
USETW(ast.wState, state);
err = usbd_do_request(sc->sc_udev, &req, &ast);
if (err) {
DPRINTF(("%s: umodem_set_comm_feat: feature=%d failed, err=%d\n",
USBDEVNAME(sc->sc_dev), feature, err));
return (err);
}
return (USBD_NORMAL_COMPLETION);
}
usbd_status
umodem_set_line_coding(sc, state)
struct umodem_softc *sc;
usb_cdc_line_state_t *state;
{
usb_device_request_t req;
usbd_status err;
DPRINTF(("%s: umodem_set_line_cod: rate=%d fmt=%d parity=%d bits=%d\n",
USBDEVNAME(sc->sc_dev), UGETDW(state->dwDTERate),
state->bCharFormat, state->bParityType, state->bDataBits));
if (bcmp(state, &sc->sc_line_state, UCDC_LINE_STATE_LENGTH) == 0) {
DPRINTF(("%s: umodem_set_line_coding: already set\n",
USBDEVNAME(sc->sc_dev)));
return (USBD_NORMAL_COMPLETION);
}
req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
req.bRequest = UCDC_SET_LINE_CODING;
USETW(req.wValue, 0);
USETW(req.wIndex, sc->sc_ctl_iface_no);
USETW(req.wLength, UCDC_LINE_STATE_LENGTH);
err = usbd_do_request(sc->sc_udev, &req, state);
if (err) {
DPRINTF(("%s: umodem_set_line_coding: failed, err=%d\n",
USBDEVNAME(sc->sc_dev), err));
return (err);
}
sc->sc_line_state = *state;
return (USBD_NORMAL_COMPLETION);
}
#if defined(__NetBSD__) || defined(__OpenBSD__)
int
umodem_activate(self, act)
device_ptr_t self;
enum devact act;
{
struct umodem_softc *sc = (struct umodem_softc *)self;
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
break;
case DVACT_DEACTIVATE:
sc->sc_dying = 1;
break;
}
return (0);
}
#endif
USB_DETACH(umodem)
{
USB_DETACH_START(umodem, sc);
#if defined(__NetBSD__) || defined(__OpenBSD__)
int maj, mn;
DPRINTF(("umodem_detach: sc=%p flags=%d tp=%p\n",
sc, flags, sc->sc_tty));
#elif defined(__FreeBSD__)
DPRINTF(("umodem_detach: sc=%p flags=%d, tp=%p\n",
sc, 0, sc->sc_tty));
#endif
sc->sc_dying = 1;
#ifdef DIAGNOSTIC
if (sc->sc_tty == 0) {
DPRINTF(("umodem_detach: no tty\n"));
return (0);
}
#endif
/* use refernce count? XXX */
#if defined(__NetBSD__) || defined(__OpenBSD__)
/* locate the major number */
for (maj = 0; maj < nchrdev; maj++)
if (cdevsw[maj].d_open == umodemopen)
break;
/* Nuke the vnodes for any open instances. */
mn = self->dv_unit;
vdevgone(maj, mn, mn, VCHR);
vdevgone(maj, mn, mn | UMODEMDIALOUT_MASK, VCHR);
vdevgone(maj, mn, mn | UMODEMCALLUNIT_MASK, VCHR);
#elif defined(__FreeBSD__)
/* XXX not yet implemented */
#endif
#if defined(__FreeBSD__)
destroy_dev(sc->dev);
#endif
/* Detach and free the tty. */
#if defined(__NetBSD__) || defined(__OpenBSD__)
tty_detach(sc->sc_tty);
ttyfree(sc->sc_tty);
sc->sc_tty = 0;
#endif
return (0);
}
#if defined(__FreeBSD__)
DRIVER_MODULE(umodem, uhub, umodem_driver, umodem_devclass, usbd_driver_load,0);
#endif