freebsd-skq/sys/dev/uart/uart_bus_ocp.c
raj 0757a4afb5 Initial support for Freescale PowerQUICC III MPC85xx system-on-chip family.
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E

This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.

The following major integrated peripherals are supported:

  * On-chip peripherals bus
  * OpenPIC interrupt controller
  * UART
  * Ethernet (TSEC)
  * Host/PCI bridge
  * QUICC engine (SCC functionality)

This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.

Approved by:	cognet (mentor)
Obtained from:	Juniper, Semihalf
MFp4:		e500
2008-03-03 17:17:00 +00:00

89 lines
2.7 KiB
C

/*-
* Copyright 2006 by Juniper Networks.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/tty.h>
#include <machine/bus.h>
#include <machine/ocpbus.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_bus.h>
static int uart_ocp_probe(device_t);
static device_method_t uart_ocp_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, uart_ocp_probe),
DEVMETHOD(device_attach, uart_bus_attach),
DEVMETHOD(device_detach, uart_bus_detach),
{ 0, 0 }
};
static driver_t uart_ocp_driver = {
uart_driver_name,
uart_ocp_methods,
sizeof(struct uart_softc),
};
static int
uart_ocp_probe(device_t dev)
{
device_t parent;
struct uart_softc *sc;
uintptr_t clock, devtype;
int error;
parent = device_get_parent(dev);
error = BUS_READ_IVAR(parent, dev, OCPBUS_IVAR_DEVTYPE, &devtype);
if (error)
return (error);
if (devtype != OCPBUS_DEVTYPE_UART)
return (ENXIO);
sc = device_get_softc(dev);
sc->sc_class = &uart_ns8250_class;
if (BUS_READ_IVAR(parent, dev, OCPBUS_IVAR_CLOCK, &clock))
clock = 0;
return (uart_bus_probe(dev, 0, clock, 0, 0));
}
DRIVER_MODULE(uart, ocpbus, uart_ocp_driver, uart_devclass, 0, 0);