7a8d25c037
Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler. Approved by: re (kib)
306 lines
11 KiB
C
306 lines
11 KiB
C
/*-
|
|
* Copyright (C) 2010 Andreas Tobler
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _PSERIES_PHYP_HVCALL_H_
|
|
#define _PSERIES_PHYP_HVCALL_H_
|
|
|
|
/* Information taken from: Power.org PAPR, Version 2.4 (December 7, 2009). */
|
|
|
|
#include <sys/types.h>
|
|
|
|
/* Return codes. */
|
|
|
|
#define H_SUCCESS 0
|
|
#define H_BUSY 1 /* Hardware Busy -- Retry Later. */
|
|
#define H_CLOSED 2 /* Virtual I/O connection is closed. */
|
|
#define H_NOT_AVAILABLE 3
|
|
#define H_CONSTRAINED 4 /* The request called for resources in excess of
|
|
the maximum allowed. The resultant allocation
|
|
was constrained to maximum allowed. */
|
|
#define H_PARTIAL 5 /* The request completed only partially successful.
|
|
Parameters were valid but some specific hcall
|
|
function condition prevented fully completing the
|
|
architected function, see the specific hcall
|
|
definition for possible reasons. */
|
|
#define H_IN_PROGRESS 14
|
|
#define H_PAGE_REGISTERED 15
|
|
#define H_PARTIAL_STORE 16
|
|
#define H_PENDING 17
|
|
#define H_CONTINUE 18
|
|
|
|
#define H_LONG_BUSY_ORDER_1_MS 9900 /* This return code is identical to
|
|
H_BUSY, but with the added bonus of a
|
|
hint to the partition OS. If the
|
|
partition OS can delay for 1
|
|
millisecond, the hcall will likely
|
|
succeed on a new hcall with no further
|
|
busy return codes. If the partition OS
|
|
cannot handle a delay, they are
|
|
certainly free to immediately turn
|
|
around and try again. */
|
|
#define H_LONG_BUSY_ORDER_10_MS 9901 /* Similar to H_LONG_BUSY_ORDER_1_MS, but
|
|
the hint is 10mSec wait this time. */
|
|
|
|
#define H_LONG_BUSY_ORDER_100_MS 9902 /* Similar to H_LONG_BUSY_ORDER_1_MS, but
|
|
the hint is 100mSec wait this time. */
|
|
|
|
#define H_LONG_BUSY_ORDER_1_S 9903 /* Similar to H_LONG_BUSY_ORDER_1_MS, but
|
|
the hint is 1Sec wait this time. */
|
|
#define H_LONG_BUSY_ORDER_10_S 9904 /* Similar to H_LONG_BUSY_ORDER_1_MS, but
|
|
the hint is 10Sec wait this time. */
|
|
#define H_LONG_BUSY_ORDER_100_S 9905 /* Similar to H_LONG_BUSY_ORDER_1_MS, but
|
|
the hint is 100Sec wait this time. */
|
|
|
|
#define H_HARDWARE -1 /* Error. */
|
|
#define H_FUNCTION -2 /* Not supported. */
|
|
#define H_PRIVILEGE -3 /* Caller not in privileged mode. */
|
|
#define H_PARAMETER -4 /* Outside valid range for partition or conflicting. */
|
|
#define H_BAD_MODE -5 /* Illegal MSR value. */
|
|
#define H_PTEG_FULL -6 /* The requested pteg was full. */
|
|
#define H_NOT_FOUND -7 /* The requested entitiy was not found. */
|
|
#define H_RESERVED_DABR -8 /* The requested address is reserved by the
|
|
hypervisor on this processor. */
|
|
#define H_NOMEM -9
|
|
#define H_AUTHORITY -10 /* The caller did not have authority to perform the
|
|
function. */
|
|
#define H_PERMISSION -11 /* The mapping specified by the request does not
|
|
allow for the requested transfer. */
|
|
#define H_DROPPED -12 /* One or more packets could not be delivered to
|
|
their requested destinations. */
|
|
#define H_S_PARM -13 /* The source parameter is illegal. */
|
|
#define H_D_PARM -14 /* The destination parameter is illegal. */
|
|
#define H_R_PARM -15 /* The remote TCE mapping is illegal. */
|
|
#define H_RESOURCE -16 /* One or more required resources are in use. */
|
|
#define H_ADAPTER_PARM -17 /* Invalid adapter. */
|
|
#define H_RH_PARM -18 /* Resource not valid or logical partition
|
|
conflicting. */
|
|
#define H_RCQ_PARM -19 /* RCQ not valid or logical partition conflicting. */
|
|
#define H_SCQ_PARM -20 /* SCQ not valid or logical partition conflicting. */
|
|
#define H_EQ_PARM -21 /* EQ not valid or logical partition conflicting. */
|
|
#define H_RT_PARM -22 /* Invalid resource type. */
|
|
#define H_ST_PARM -23 /* Invalid service type. */
|
|
#define H_SIGT_PARM -24 /* Invalid signalling type. */
|
|
#define H_TOKEN_PARM -25 /* Invalid token. */
|
|
#define H_MLENGTH_PARM -27 /* Invalid memory length. */
|
|
#define H_MEM_PARM -28 /* Invalid memory I/O virtual address. */
|
|
#define H_MEM_ACCESS_PARM -29 /* Invalid memory access control. */
|
|
#define H_ATTR_PARM -30 /* Invalid attribute value. */
|
|
#define H_PORT_PARM -31 /* Invalid port number. */
|
|
#define H_MCG_PARM -32 /* Invalid multicast group. */
|
|
#define H_VL_PARM -33 /* Invalid virtual lane. */
|
|
#define H_TSIZE_PARM -34 /* Invalid trace size. */
|
|
#define H_TRACE_PARM -35 /* Invalid trace buffer. */
|
|
#define H_MASK_PARM -37 /* Invalid mask value. */
|
|
#define H_MCG_FULL -38 /* Multicast attachments exceeded. */
|
|
#define H_ALIAS_EXIST -39 /* Alias QP already defined. */
|
|
#define H_P_COUNTER -40 /* Invalid counter specification. */
|
|
#define H_TABLE_FULL -41 /* Resource page table full. */
|
|
#define H_ALT_TABLE -42 /* Alternate table already exists / alternate page
|
|
table not available. */
|
|
#define H_MR_CONDITION -43 /* Invalid memory region condition. */
|
|
#define H_NOT_ENOUGH_RESOURCES -44 /* Insufficient resources. */
|
|
#define H_R_STATE -45 /* Invalid resource state condition or sequencing
|
|
error. */
|
|
#define H_RESCINDED -46
|
|
#define H_ABORTED -54
|
|
#define H_P2 -55
|
|
#define H_P3 -56
|
|
#define H_P4 -57
|
|
#define H_P5 -58
|
|
#define H_P6 -59
|
|
#define H_P7 -60
|
|
#define H_P8 -61
|
|
#define H_P9 -62
|
|
#define H_NOOP -63
|
|
#define H_TOO_BIG -64
|
|
|
|
#define H_UNSUPPORTED -67 /* Parameter value outside of the range supported
|
|
by this implementation. */
|
|
|
|
/* Flags. */
|
|
/* Table 168. Page Frame Table Access flags field definition. */
|
|
#define H_EXACT (1UL<<(63-24))
|
|
#define H_R_XLATE (1UL<<(63-25))
|
|
#define H_READ_4 (1UL<<(63-26))
|
|
|
|
/* Table 178. CMO Page Usage State flags Definition. */
|
|
#define H_PAGE_STATE_CHANGE (1UL<<(63-28))
|
|
#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30)))
|
|
#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
|
|
#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31)))
|
|
#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
|
|
|
|
/* Table 168. Page Frame Table Access flags field definition. */
|
|
#define H_AVPN (1UL<<(63-32))
|
|
#define H_ANDCOND (1UL<<(63-33))
|
|
|
|
#define H_ICACHE_INVALIDATE (1UL<<(63-40))
|
|
#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41))
|
|
|
|
#define H_ZERO_PAGE (1UL<<(63-48))
|
|
#define H_COPY_PAGE (1UL<<(63-49))
|
|
|
|
#define H_N (1UL<<(63-61))
|
|
#define H_PP1 (1UL<<(63-62))
|
|
#define H_PP2 (1UL<<(63-63))
|
|
|
|
/* pSeries hypervisor opcodes. */
|
|
#define H_REMOVE 0x04
|
|
#define H_ENTER 0x08
|
|
#define H_READ 0x0c
|
|
#define H_CLEAR_MOD 0x10
|
|
#define H_CLEAR_REF 0x14
|
|
#define H_PROTECT 0x18
|
|
#define H_GET_TCE 0x1c
|
|
#define H_PUT_TCE 0x20
|
|
#define H_SET_SPRG0 0x24
|
|
#define H_SET_DABR 0x28
|
|
#define H_PAGE_INIT 0x2c
|
|
#define H_SET_ASR 0x30
|
|
#define H_ASR_ON 0x34
|
|
#define H_ASR_OFF 0x38
|
|
#define H_LOGICAL_CI_LOAD 0x3c
|
|
#define H_LOGICAL_CI_STORE 0x40
|
|
#define H_LOGICAL_CACHE_LOAD 0x44
|
|
#define H_LOGICAL_CACHE_STORE 0x48
|
|
#define H_LOGICAL_ICBI 0x4c
|
|
#define H_LOGICAL_DCBF 0x50
|
|
#define H_GET_TERM_CHAR 0x54
|
|
#define H_PUT_TERM_CHAR 0x58
|
|
#define H_REAL_TO_LOGICAL 0x5c
|
|
#define H_HYPERVISOR_DATA 0x60
|
|
#define H_EOI 0x64
|
|
#define H_CPPR 0x68
|
|
#define H_IPI 0x6c
|
|
#define H_IPOLL 0x70
|
|
#define H_XIRR 0x74
|
|
#define H_MIGRATE_DMA 0x78
|
|
#define H_PERFMON 0x7c
|
|
#define H_REGISTER_VPA 0xdc
|
|
#define H_CEDE 0xe0
|
|
#define H_CONFER 0xe4
|
|
#define H_PROD 0xe8
|
|
#define H_GET_PPP 0xec
|
|
#define H_SET_PPP 0xf0
|
|
#define H_PURR 0xf4
|
|
#define H_PIC 0xf8
|
|
#define H_REG_CRQ 0xfc
|
|
#define H_FREE_CRQ 0x100
|
|
#define H_VIO_SIGNAL 0x104
|
|
#define H_SEND_CRQ 0x108
|
|
#define H_PUT_RTCE 0x10c
|
|
#define H_COPY_RDMA 0x110
|
|
#define H_REGISTER_LOGICAL_LAN 0x114
|
|
#define H_FREE_LOGICAL_LAN 0x118
|
|
#define H_ADD_LOGICAL_LAN_BUFFER 0x11c
|
|
#define H_SEND_LOGICAL_LAN 0x120
|
|
#define H_BULK_REMOVE 0x124
|
|
#define H_WRITE_RDMA 0x128
|
|
#define H_READ_RDMA 0x12c
|
|
#define H_MULTICAST_CTRL 0x130
|
|
#define H_SET_XDABR 0x134
|
|
#define H_STUFF_TCE 0x138
|
|
#define H_PUT_TCE_INDIRECT 0x13c
|
|
#define H_PUT_RTCE_INDIRECT 0x140
|
|
#define H_CHANGE_LOGICAL_LAN_MAC 0x14c
|
|
#define H_VTERM_PARTNER_INFO 0x150
|
|
#define H_REGISTER_VTERM 0x154
|
|
#define H_FREE_VTERM 0x158
|
|
/* Reserved ....
|
|
#define H_RESET_EVENTS 0x15c
|
|
#define H_ALLOC_RESOURCE 0x160
|
|
#define H_FREE_RESOURCE 0x164
|
|
#define H_MODIFY_QP 0x168
|
|
#define H_QUERY_QP 0x16c
|
|
#define H_REREGISTER_PMR 0x170
|
|
#define H_REGISTER_SMR 0x174
|
|
#define H_QUERY_MR 0x178
|
|
#define H_QUERY_MW 0x17c
|
|
#define H_QUERY_HCA 0x180
|
|
#define H_QUERY_PORT 0x184
|
|
#define H_MODIFY_PORT 0x188
|
|
#define H_DEFINE_AQP1 0x18c
|
|
#define H_GET_TRACE_BUFFER 0x190
|
|
#define H_DEFINE_AQP0 0x194
|
|
#define H_RESIZE_MR 0x198
|
|
#define H_ATTACH_MCQP 0x19c
|
|
#define H_DETACH_MCQP 0x1a0
|
|
#define H_CREATE_RPT 0x1a4
|
|
#define H_REMOVE_RPT 0x1a8
|
|
#define H_REGISTER_RPAGES 0x1ac
|
|
#define H_DISABLE_AND_GETC 0x1b0
|
|
#define H_ERROR_DATA 0x1b4
|
|
#define H_GET_HCA_INFO 0x1b8
|
|
#define H_GET_PERF_COUNT 0x1bc
|
|
#define H_MANAGE_TRACE 0x1c0
|
|
.... */
|
|
#define H_FREE_LOGICAL_LAN_BUFFER 0x1d4
|
|
#define H_POLL_PENDING 0x1d8
|
|
/* Reserved ....
|
|
#define H_QUERY_INT_STATE 0x1e4
|
|
.... */
|
|
#define H_LIOBN_ATTRIBUTES 0x240
|
|
#define H_ILLAN_ATTRIBUTES 0x244
|
|
#define H_REMOVE_RTCE 0x24c
|
|
/* Reserved ...
|
|
#define H_MODIFY_HEA_QP 0x250
|
|
#define H_QUERY_HEA_QP 0x254
|
|
#define H_QUERY_HEA 0x258
|
|
#define H_QUERY_HEA_PORT 0x25c
|
|
#define H_MODIFY_HEA_PORT 0x260
|
|
#define H_REG_BCMC 0x264
|
|
#define H_DEREG_BCMC 0x268
|
|
#define H_REGISTER_HEA_RPAGES 0x26c
|
|
#define H_DISABLE_AND_GET_HEA 0x270
|
|
#define H_GET_HEA_INFO 0x274
|
|
#define H_ALLOC_HEA_RESOURCE 0x278
|
|
#define H_ADD_CONN 0x284
|
|
#define H_DEL_CONN 0x288
|
|
... */
|
|
#define H_JOIN 0x298
|
|
#define H_DONOR_OPERATION 0x29c
|
|
#define H_VASI_SIGNAL 0x2a0
|
|
#define H_VASI_STATE 0x2a4
|
|
#define H_VIOCTL 0x2a8
|
|
#define H_VRMASD 0x2ac
|
|
#define H_ENABLE_CRQ 0x2b0
|
|
/* Reserved ...
|
|
#define H_GET_EM_PARMS 0x2b8
|
|
... */
|
|
#define H_VPM_STAT 0x2bc
|
|
#define H_SET_MPP 0x2d0
|
|
#define H_GET_MPP 0x2d4
|
|
#define MAX_HCALL_OPCODE H_GET_MPP
|
|
|
|
int64_t phyp_hcall(uint64_t opcode, ...);
|
|
int64_t phyp_pft_hcall(uint64_t opcode, uint64_t flags, uint64_t pteidx,
|
|
uint64_t pte_hi, uint64_t pte_lo, uint64_t *pteidx_out, uint64_t *ptelo_out,
|
|
uint64_t *r6);
|
|
|
|
#endif /* _PSERIES_PHYP_HVCALL_H_ */
|
|
|