50e55c591e
r235162: Initial LPC32x0 support. Includes DTS file for Embedded Artists EA3250 board. Peripherals currently supported: - Serial ports - Interrupt controller - Timers - Ethernet - USB host - Framebuffer (in conjunction with SSD1289 LCD controller) - RTC - SPI - GPIO Submitted by: Jakub Wojciech Klama <jceel@freebsd.org>
355 lines
10 KiB
C
355 lines
10 KiB
C
/*-
|
|
* Copyright (c) 2011 Jakub Wojciech Klama <jceel@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/stdint.h>
|
|
#include <sys/stddef.h>
|
|
#include <sys/param.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/types.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/sx.h>
|
|
#include <sys/unistd.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/priv.h>
|
|
|
|
#include <sys/kdb.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
|
|
#include <dev/usb/usb_core.h>
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_process.h>
|
|
#include <dev/usb/usb_util.h>
|
|
|
|
#include <dev/usb/usb_controller.h>
|
|
#include <dev/usb/usb_bus.h>
|
|
#include <dev/usb/controller/ohci.h>
|
|
#include <dev/usb/controller/ohcireg.h>
|
|
|
|
#include <arm/lpc/lpcreg.h>
|
|
#include <arm/lpc/lpcvar.h>
|
|
|
|
#define I2C_START_BIT (1 << 8)
|
|
#define I2C_STOP_BIT (1 << 9)
|
|
#define I2C_READ 0x01
|
|
#define I2C_WRITE 0x00
|
|
#define DUMMY_BYTE 0x55
|
|
|
|
#define lpc_otg_read_4(_sc, _reg) \
|
|
bus_space_read_4(_sc->sc_io_tag, _sc->sc_io_hdl, _reg)
|
|
#define lpc_otg_write_4(_sc, _reg, _value) \
|
|
bus_space_write_4(_sc->sc_io_tag, _sc->sc_io_hdl, _reg, _value)
|
|
#define lpc_otg_wait_write_4(_sc, _wreg, _sreg, _value) \
|
|
do { \
|
|
lpc_otg_write_4(_sc, _wreg, _value); \
|
|
while ((lpc_otg_read_4(_sc, _sreg) & _value) != _value); \
|
|
} while (0);
|
|
|
|
static int lpc_ohci_probe(device_t dev);
|
|
static int lpc_ohci_attach(device_t dev);
|
|
static int lpc_ohci_detach(device_t dev);
|
|
|
|
static void lpc_otg_i2c_reset(struct ohci_softc *);
|
|
|
|
static int lpc_isp3101_read(struct ohci_softc *, int);
|
|
static void lpc_isp3101_write(struct ohci_softc *, int, int);
|
|
static void lpc_isp3101_clear(struct ohci_softc *, int, int);
|
|
static void lpc_isp3101_configure(device_t dev, struct ohci_softc *);
|
|
|
|
static int
|
|
lpc_ohci_probe(device_t dev)
|
|
{
|
|
if (!ofw_bus_is_compatible(dev, "lpc,usb-ohci"))
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "LPC32x0 USB OHCI controller");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
lpc_ohci_attach(device_t dev)
|
|
{
|
|
struct ohci_softc *sc = device_get_softc(dev);
|
|
int err;
|
|
int rid;
|
|
int i = 0;
|
|
uint32_t usbctrl;
|
|
uint32_t otgstatus;
|
|
|
|
sc->sc_bus.parent = dev;
|
|
sc->sc_bus.devices = sc->sc_devices;
|
|
sc->sc_bus.devices_max = OHCI_MAX_DEVICES;
|
|
|
|
if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(dev),
|
|
&ohci_iterate_hw_softc))
|
|
return (ENOMEM);
|
|
|
|
rid = 0;
|
|
sc->sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
if (!sc->sc_io_res) {
|
|
device_printf(dev, "cannot map OHCI register space\n");
|
|
goto fail;
|
|
}
|
|
|
|
sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
|
|
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
|
|
sc->sc_io_size = rman_get_size(sc->sc_io_res);
|
|
|
|
rid = 0;
|
|
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
|
|
if (sc->sc_irq_res == NULL) {
|
|
device_printf(dev, "cannot allocate interrupt\n");
|
|
goto fail;
|
|
}
|
|
|
|
sc->sc_bus.bdev = device_add_child(dev, "usbus", -1);
|
|
if (!(sc->sc_bus.bdev))
|
|
goto fail;
|
|
|
|
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
|
|
strlcpy(sc->sc_vendor, "NXP", sizeof(sc->sc_vendor));
|
|
|
|
err = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
|
|
NULL, (void *)ohci_interrupt, sc, &sc->sc_intr_hdl);
|
|
if (err) {
|
|
sc->sc_intr_hdl = NULL;
|
|
goto fail;
|
|
}
|
|
|
|
usbctrl = lpc_pwr_read(dev, LPC_CLKPWR_USB_CTRL);
|
|
usbctrl |= LPC_CLKPWR_USB_CTRL_SLAVE_HCLK | LPC_CLKPWR_USB_CTRL_BUSKEEPER;
|
|
lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
|
|
|
|
/* Enable OTG I2C clock */
|
|
lpc_otg_wait_write_4(sc, LPC_OTG_CLOCK_CTRL,
|
|
LPC_OTG_CLOCK_STATUS, LPC_OTG_CLOCK_CTRL_I2C_EN);
|
|
|
|
/* Reset OTG I2C bus */
|
|
lpc_otg_i2c_reset(sc);
|
|
|
|
lpc_isp3101_configure(dev, sc);
|
|
|
|
/* Configure PLL */
|
|
usbctrl &= ~(LPC_CLKPWR_USB_CTRL_CLK_EN1 | LPC_CLKPWR_USB_CTRL_CLK_EN2);
|
|
lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
|
|
|
|
usbctrl |= LPC_CLKPWR_USB_CTRL_CLK_EN1;
|
|
lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
|
|
|
|
usbctrl |= LPC_CLKPWR_USB_CTRL_FDBKDIV(192-1);
|
|
usbctrl |= LPC_CLKPWR_USB_CTRL_POSTDIV(1);
|
|
usbctrl |= LPC_CLKPWR_USB_CTRL_PLL_PDOWN;
|
|
|
|
lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
|
|
do {
|
|
usbctrl = lpc_pwr_read(dev, LPC_CLKPWR_USB_CTRL);
|
|
if (i++ > 100000) {
|
|
device_printf(dev, "USB OTG PLL doesn't lock!\n");
|
|
goto fail;
|
|
}
|
|
} while ((usbctrl & LPC_CLKPWR_USB_CTRL_PLL_LOCK) == 0);
|
|
|
|
usbctrl |= LPC_CLKPWR_USB_CTRL_CLK_EN2;
|
|
usbctrl |= LPC_CLKPWR_USB_CTRL_HOST_NEED_CLK_EN;
|
|
lpc_pwr_write(dev, LPC_CLKPWR_USB_CTRL, usbctrl);
|
|
lpc_otg_wait_write_4(sc, LPC_OTG_CLOCK_CTRL, LPC_OTG_CLOCK_STATUS,
|
|
(LPC_OTG_CLOCK_CTRL_AHB_EN | LPC_OTG_CLOCK_CTRL_OTG_EN |
|
|
LPC_OTG_CLOCK_CTRL_I2C_EN | LPC_OTG_CLOCK_CTRL_HOST_EN));
|
|
|
|
otgstatus = lpc_otg_read_4(sc, LPC_OTG_STATUS);
|
|
lpc_otg_write_4(sc, LPC_OTG_STATUS, otgstatus |
|
|
LPC_OTG_STATUS_HOST_EN);
|
|
|
|
lpc_isp3101_write(sc, LPC_ISP3101_OTG_CONTROL_1,
|
|
LPC_ISP3101_OTG1_VBUS_DRV);
|
|
|
|
err = ohci_init(sc);
|
|
if (err)
|
|
goto fail;
|
|
|
|
err = device_probe_and_attach(sc->sc_bus.bdev);
|
|
if (err)
|
|
goto fail;
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
if (sc->sc_intr_hdl)
|
|
bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intr_hdl);
|
|
if (sc->sc_irq_res)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
|
|
if (sc->sc_io_res)
|
|
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_io_res);
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
lpc_isp3101_read(struct ohci_softc *sc, int reg)
|
|
{
|
|
int status;
|
|
int i = 0;
|
|
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX,
|
|
(LPC_ISP3101_I2C_ADDR << 1) | I2C_START_BIT);
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX, reg);
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX, (LPC_ISP3101_I2C_ADDR << 1) |
|
|
I2C_START_BIT | I2C_READ);
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_TXRX, I2C_STOP_BIT | DUMMY_BYTE);
|
|
|
|
do {
|
|
status = lpc_otg_read_4(sc, LPC_OTG_I2C_STATUS);
|
|
i++;
|
|
} while ((status & LPC_OTG_I2C_STATUS_TDI) == 0 || i < 100000);
|
|
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_STATUS, LPC_OTG_I2C_STATUS_TDI);
|
|
|
|
return (lpc_otg_read_4(sc, LPC_OTG_I2C_TXRX) & 0xff);
|
|
}
|
|
|
|
static void
|
|
lpc_otg_i2c_reset(struct ohci_softc *sc)
|
|
{
|
|
int ctrl;
|
|
int i = 0;
|
|
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_CLKHI, 0x3f);
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_CLKLO, 0x3f);
|
|
|
|
ctrl = lpc_otg_read_4(sc, LPC_OTG_I2C_CTRL);
|
|
lpc_otg_write_4(sc, LPC_OTG_I2C_CTRL, ctrl | LPC_OTG_I2C_CTRL_SRST);
|
|
|
|
do {
|
|
ctrl = lpc_otg_read_4(sc, LPC_OTG_I2C_CTRL);
|
|
i++;
|
|
} while (ctrl & LPC_OTG_I2C_CTRL_SRST);
|
|
}
|
|
|
|
static void
|
|
lpc_isp3101_write(struct ohci_softc *sc, int reg, int value)
|
|
{
|
|
int status;
|
|
int i = 0;
|
|
|
|
bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_TXRX,
|
|
(LPC_ISP3101_I2C_ADDR << 1) | I2C_START_BIT);
|
|
bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_TXRX,
|
|
(reg | I2C_WRITE));
|
|
bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_TXRX,
|
|
(value | I2C_STOP_BIT));
|
|
|
|
do {
|
|
status = bus_space_read_4(sc->sc_io_tag, sc->sc_io_hdl,
|
|
LPC_OTG_I2C_STATUS);
|
|
i++;
|
|
} while ((status & LPC_OTG_I2C_STATUS_TDI) == 0 || i < 100000);
|
|
|
|
bus_space_write_4(sc->sc_io_tag, sc->sc_io_hdl, LPC_OTG_I2C_STATUS,
|
|
LPC_OTG_I2C_STATUS_TDI);
|
|
}
|
|
|
|
static __inline void
|
|
lpc_isp3101_clear(struct ohci_softc *sc, int reg, int value)
|
|
{
|
|
lpc_isp3101_write(sc, (reg | LPC_ISP3101_REG_CLEAR_ADDR), value);
|
|
}
|
|
|
|
static void
|
|
lpc_isp3101_configure(device_t dev, struct ohci_softc *sc)
|
|
{
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_MODE_CONTROL_1, LPC_ISP3101_MC1_UART_EN);
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_MODE_CONTROL_1, ~LPC_ISP3101_MC1_SPEED_REG);
|
|
lpc_isp3101_write(sc, LPC_ISP3101_MODE_CONTROL_1, LPC_ISP3101_MC1_SPEED_REG);
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_MODE_CONTROL_2, ~0);
|
|
lpc_isp3101_write(sc, LPC_ISP3101_MODE_CONTROL_2,
|
|
(LPC_ISP3101_MC2_BI_DI | LPC_ISP3101_MC2_PSW_EN
|
|
| LPC_ISP3101_MC2_SPD_SUSP_CTRL));
|
|
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_OTG_CONTROL_1, ~0);
|
|
lpc_isp3101_write(sc, LPC_ISP3101_MODE_CONTROL_1, LPC_ISP3101_MC1_DAT_SE0);
|
|
lpc_isp3101_write(sc, LPC_ISP3101_OTG_CONTROL_1,
|
|
(LPC_ISP3101_OTG1_DM_PULLDOWN | LPC_ISP3101_OTG1_DP_PULLDOWN));
|
|
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_OTG_CONTROL_1,
|
|
(LPC_ISP3101_OTG1_DM_PULLUP | LPC_ISP3101_OTG1_DP_PULLUP));
|
|
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_OTG_INTR_LATCH, ~0);
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_OTG_INTR_FALLING, ~0);
|
|
lpc_isp3101_clear(sc, LPC_ISP3101_OTG_INTR_RISING, ~0);
|
|
|
|
device_printf(dev,
|
|
"ISP3101 PHY <vendor:0x%04x, product:0x%04x, version:0x%04x>\n",
|
|
(lpc_isp3101_read(sc, 0x00) | (lpc_isp3101_read(sc, 0x01) << 8)),
|
|
(lpc_isp3101_read(sc, 0x03) | (lpc_isp3101_read(sc, 0x04) << 8)),
|
|
(lpc_isp3101_read(sc, 0x14) | (lpc_isp3101_read(sc, 0x15) << 8)));
|
|
}
|
|
|
|
static int
|
|
lpc_ohci_detach(device_t dev)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
|
|
static device_method_t lpc_ohci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, lpc_ohci_probe),
|
|
DEVMETHOD(device_attach, lpc_ohci_attach),
|
|
DEVMETHOD(device_detach, lpc_ohci_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t lpc_ohci_driver = {
|
|
"ohci",
|
|
lpc_ohci_methods,
|
|
sizeof(struct ohci_softc),
|
|
};
|
|
|
|
static devclass_t lpc_ohci_devclass;
|
|
|
|
DRIVER_MODULE(ohci, simplebus, lpc_ohci_driver, lpc_ohci_devclass, 0, 0);
|
|
MODULE_DEPEND(ohci, usb, 1, 1, 1);
|