Rafal Jaworowski ecb1ab1761 Obtain TSEC h/w address from the parent bus (OCP) and not rely blindly on what ... might be currently programmed into the registers. Underlying firmware (U-Boot) would typically program MAC address into the first unit only, and others are left uninitialized. It is now possible to retrieve and program MAC address for all units properly, provided they were passed on in the bootinfo metadata. Reviewed by: imp, marcel Approved by: cognet (mentor)		2008-03-12 16:32:08 +00:00
..
aim	Remove kernel support for M:N threading.	2008-03-12 10:12:01 +00:00
booke	Obtain TSEC h/w address from the parent bus (OCP) and not rely blindly on what	2008-03-12 16:32:08 +00:00
compile
conf	Remove kernel support for M:N threading.	2008-03-12 10:12:01 +00:00
fpu	Don't define DEBUG. No debugging required.	2008-02-24 17:10:30 +00:00
include	Obtain TSEC h/w address from the parent bus (OCP) and not rely blindly on what	2008-03-12 16:32:08 +00:00
mpc85xx	Obtain TSEC h/w address from the parent bus (OCP) and not rely blindly on what	2008-03-12 16:32:08 +00:00
ofw	- Make pcib_devclass private to sys/dev/pci/pci_pci.c and change all the	2006-01-06 19:22:19 +00:00
powermac	Add support for the BUS_CONFIG_INTR() method to the platform and to	2008-03-07 22:08:43 +00:00
powerpc	In intr_lookup(), when adding an IRQ to powerpc_intrs[], also	2008-03-11 19:58:52 +00:00
psim	Add support for the BUS_CONFIG_INTR() method to the platform and to	2008-03-07 22:08:43 +00:00