d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/dev
History
peter eda3ab6536 Encapsulate the old PCI compatability support and APIs completely under 
"options COMPAT_OLDPCI".  This option already existed, but now also tidies
up the declarations in #include <pci/pci*.h>.  It is amazing how much stuff
was using the old pre-FreeBSD 3.x names and going silently undetected.
2000-05-28 16:35:57 +00:00
..
advansys
Use the correct register names, not the FreeBSD 2.2 compatability ones.
2000-05-28 15:47:00 +00:00
aha
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
ahb
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
aic
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
aic7xxx
Use the correct register names, not the FreeBSD 2.2 compatability ones.
2000-05-28 15:47:00 +00:00
amd
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
amr
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
an
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
ar
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
ata
Add a new pmap entry point, pmap_enter_temporary() to be used during
2000-05-28 15:49:55 +00:00
atkbdc
Manipulate with AltGR Led (really CapsLock Led) only in K_XLATE mode, because
2000-05-28 12:43:24 +00:00
awi
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
bktr
Use the correct register names. s/PCI_MAP_REG_START/PCIR_MAPS/
2000-05-28 15:48:48 +00:00
buslogic
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
cardbus
…
ccd
Separate the struct bio related stuff out of <sys/buf.h> into
2000-05-05 09:59:14 +00:00
cs
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
cy
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
dc
Use the correct register names. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:02:05 +00:00
de
Use the correct name for the PCI command register (PCIR_COMMAND). Don't
2000-05-28 16:06:56 +00:00
dec
Add missing $FreeBSD$
2000-05-01 19:54:26 +00:00
dgb
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
dpt
Use correct register values. This one was in aic7xxx and advansys too.
2000-05-28 15:50:40 +00:00
ed
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
eisa
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
en
Ahhrggg. Put the test for the compat shims AFTER the file that includes
2000-03-27 20:24:02 +00:00
ep
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
ex
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
fb
Prevent vidcontrol -i from crashing alphas
2000-05-21 01:16:47 +00:00
fdc
Step down a level and issue format requests with a struct bio instead
2000-05-06 07:01:47 +00:00
fe
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
fxp
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
hea
Remove un-needed #include's.
2000-01-17 20:49:59 +00:00
hfa
Ensure that DMA mappings are freed in error situations.
2000-01-15 21:01:04 +00:00
ic
Add $FreeBSD$
2000-05-01 20:32:07 +00:00
ida
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
ie
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
iicbus
Remove unneeded #include <sys/kernel.h>
2000-04-29 15:36:14 +00:00
isp
Fix some breakage about how we build WWNs. Do some other fabric related
2000-05-09 01:14:43 +00:00
joy
Add ADS7182 as a known Joystick.
2000-01-18 08:38:35 +00:00
kbd
Manipulate with AltGR Led (really CapsLock Led) only in K_XLATE mode, because
2000-05-28 12:43:24 +00:00
lmc
Adjust to accomodate recent changes to the rcvdata and rcvmsg
2000-05-01 03:31:58 +00:00
lnc
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
mc146818
Add missing $FreeBSD$
2000-05-01 19:54:26 +00:00
mca
Set the RF_SHAREABLE flage when we allocate an IRQ.
2000-03-13 11:43:53 +00:00
mcd
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
md
Separate the struct bio related stuff out of <sys/buf.h> into
2000-05-05 09:59:14 +00:00
mii
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
mlx
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
mse
- `Newbus'ified the driver.
2000-03-18 15:13:30 +00:00
pccard
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
pcf
Remove ~25 unneeded #include <sys/conf.h>
2000-04-19 14:58:28 +00:00
pci
Encapsulate the old PCI compatability support and APIs completely under
2000-05-28 16:35:57 +00:00
pcic
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
pdq
Uh, ya, sure this almost compiled for __bsdi__. NOT!
2000-05-21 05:33:40 +00:00
ppbus
Match the include protection with the install location.
2000-05-20 05:45:04 +00:00
ppc
Port ppc driver to alpha.
2000-05-14 13:47:57 +00:00
ray
Moved a bit of resource allocation from probe to attach based on feedback
2000-05-23 16:38:12 +00:00
rc
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
rp
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
scd
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
sf
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
si
Always leave SP_DCEN on (monitor DCD). Otherwise the firmware *really*
2000-01-25 16:45:54 +00:00
sio
Add SUP1670 - Supra 336i V+ Intl. Since we update the PnP IDs
2000-05-26 11:41:08 +00:00
sk
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
smbus
Remove unneeded #include <sys/kernel.h>
2000-04-29 15:36:14 +00:00
sn
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
snp
Unstaticize this driver. You can have as many snoop devices as you can
2000-04-02 00:35:37 +00:00
sound
Use the correct name for a mapping register, not the old FreeBSD 2.x
2000-05-28 15:15:14 +00:00
speaker
Don't use struct buf for random small temporary buffers.
2000-05-05 09:05:39 +00:00
sr
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
streams
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
sym
Work-around a couple of C1010 quirks:
2000-05-07 09:54:33 +00:00
syscons
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
ti
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
twe
Initial import of a driver for the 3ware Escalade family of ATA RAID
2000-05-24 23:35:23 +00:00
tx
Avoid double-call to bpf_mtap(). This is now handled in ether_input().
2000-05-24 00:05:44 +00:00
usb
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
vinum
Don't forget 'stripe' and 'mirror' commands when we turn off
2000-05-20 03:21:50 +00:00
vn
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
vr
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
vx
Warn that this as an oldpci device..
2000-05-28 15:59:52 +00:00
wi
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
wl
Mass update of isa drivers using compatability shims to use
2000-05-28 13:40:48 +00:00
xe
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00