Peter Wemm edc31306f7 Fix pci-pci bridges (I hope). ...

In the nexus case, there are no ivars for children of nexus devices,
and we were passing data in from before the device existed, hence ivars
are convenient as the softc doesn't really exist yet.
However, for pci->pci bridges, the pcib occupies a pci device itself,
which *does* already have ivars.  However, softc is available and stable
at this point since we've been identified and are locating the bus during
attach.  So, use softc for this version of pcib devices for storing the
physical bus number in.

2000-09-03 08:30:10 +00:00

..

agp_ali.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_amd.c

Release resources properly in detach.

2000-06-10 17:53:20 +00:00

agp_i810.c

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agp_if.m

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_intel.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_sis.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp_via.c

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

agp.c

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agppriv.h

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agpreg.h

Add support for Intel's i810 chipset with integrated graphics. An

2000-07-12 10:13:07 +00:00

agpvar.h

A driver for programming the AGP hardware. This is only very lightly

2000-06-09 16:04:30 +00:00

alpm.c

Remove ~25 unneeded #include <sys/conf.h>

2000-04-19 14:58:28 +00:00

amd.c

Remove ~25 unneeded #include <sys/conf.h>

2000-04-19 14:58:28 +00:00

amd.h

Back out the previous change to the queue(3) interface.

2000-05-26 02:09:24 +00:00

cy_pci.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

cy_pcireg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

dc21040reg.h

s/Id/FreeBSD/

1999-08-09 12:52:49 +00:00

ide_pcireg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

if_ar_p.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

if_dc.c

Make the blinkylights on non-MII 21143 cards work. We need to enable

2000-09-01 23:59:54 +00:00

if_dcreg.h

Define some more bits in CSR15 needed for previous change.

2000-09-02 00:02:51 +00:00

if_de.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_devar.h

Use bus_space for all register accesses.

2000-05-13 18:47:24 +00:00

if_en_pci.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

if_fxp.c

Fix a bug brought to light by the people working on SMPng. I don't quite

2000-08-11 17:47:55 +00:00

if_fxpreg.h

Added support for the i82559ER (10/100Mbps NIC for embedded applications).

2000-06-18 10:26:09 +00:00

if_fxpvar.h

Added support for cards and on-motherboard NICs that use an SEEPROM

2000-03-28 04:41:42 +00:00

if_mn.c

Newbusify this driver at an expense of 40 extra lines of code.

2000-07-10 19:33:41 +00:00

if_rl.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_rlreg.h

Make some tweaks to the RealTek driver:

1999-10-21 19:42:03 +00:00

if_sf.c

Close PR# 19904: remember to call sf_setmulti() when initializing the

2000-07-14 19:11:02 +00:00

if_sfreg.h

Modify the Adaptec "starfire" driver to reset the PHY on the MII bus

1999-12-05 20:02:45 +00:00

if_sis.c

Fix up the sis driver, largely to improve the NatSemi DP83815 support:

2000-08-22 23:26:51 +00:00

if_sisreg.h

Fix up the sis driver, largely to improve the NatSemi DP83815 support:

2000-08-22 23:26:51 +00:00

if_sk.c

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_skreg.h

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_sr_p.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

if_ste.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_stereg.h

Spruce up the Sundance ST201 driver:

1999-12-07 20:14:42 +00:00

if_ti.c

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

if_tireg.h

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_tl.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_tlreg.h

Make some small performance tweaks to the tl driver. This should hopefully

1999-09-19 22:39:24 +00:00

if_tx.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_txvar.h

Added support for SMC9432BTX cards.

2000-06-21 19:19:49 +00:00

if_vr.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_vrreg.h

Close PR# 19617: add support for VIA VT6102 NICs to VIA Rhine driver.

2000-07-05 21:37:21 +00:00

if_wb.c

Replace the mbuf external reference counting code with something

2000-08-19 08:32:59 +00:00

if_wbreg.h

Convert the Adaptec and Winbond drivers to miibus.

1999-08-30 23:08:32 +00:00

if_wx.c

Make all Ethernet drivers attach using ether_ifattach() and detach using

2000-07-13 22:54:34 +00:00

if_wxreg.h

Fix this driver to (finally) work with switches. Some more black

2000-06-16 06:28:31 +00:00

if_wxvar.h

Fix this driver to (finally) work with switches. Some more black

2000-06-16 06:28:31 +00:00

if_xl.c

Add support for the 3Com 556 and 556B mini-pci adapters used on some

2000-08-28 20:40:03 +00:00

if_xlreg.h

Add support for the 3Com 556 and 556B mini-pci adapters used on some

2000-08-28 20:40:03 +00:00

intpm.c

Fix some leakage from inside #ifdef PCI_COMPAT (the FreeBSD 2.2 compat

2000-05-28 16:17:18 +00:00

intpmreg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

isp_pci.c

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

locate.pl

use warnings

2000-06-27 22:41:12 +00:00

meteor_reg.h

Add $FreeBSD$

2000-05-01 20:32:07 +00:00

meteor.c

Ahhrggg. Put the test for the compat shims AFTER the file that includes

2000-03-27 20:24:02 +00:00

ncr.c

ncr.c is no longer a COMPAT_OLDPCI device - remove the warning.

2000-05-28 10:45:06 +00:00

ncrreg.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

ohci_pci.c

Only display the 'Disable PNP-OS BIOS option' message on the i386 arch.

2000-05-11 20:17:28 +00:00

pccbb.c

Initial import of cardbus bridge driver (cbb) from the latest

1999-11-18 07:14:54 +00:00

pccbbreg.h

Initial import of cardbus bridge driver (cbb) from the latest

1999-11-18 07:14:54 +00:00

pccbbvar.h

Initial import of cardbus bridge driver (cbb) from the latest

1999-11-18 07:14:54 +00:00

pci_compat.c

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

pci_if.m

* Factor out the object system from new-bus so that it can be used by

2000-04-08 14:17:18 +00:00

pci.c

If a base address register has been set up by the BIOS, but the relevant

2000-09-01 23:09:02 +00:00

pcib_if.m

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

pcic_p.c

Add a detach method to allow this device to be unloaded.

2000-08-30 06:57:38 +00:00

pcic_p.h

Add TI-1031 id. It doesn't work yet, but it is nice to have it.

2000-08-29 04:40:17 +00:00

pcireg.h

Encapsulate the old PCI compatability support and APIs completely under

2000-05-28 16:35:57 +00:00

pcisupport.c

Fix pci-pci bridges (I hope).

2000-09-03 08:30:10 +00:00

pcivar.h

* Completely rewrite the alpha busspace to hide the implementation from

2000-08-28 21:48:13 +00:00

scsiiom.c

Add $FreeBSD$

2000-05-01 20:32:07 +00:00

simos.c

Separate the struct bio related stuff out of <sys/buf.h> into

2000-05-05 09:59:14 +00:00

simos.h

$Id$ -> $FreeBSD$

1999-08-28 01:08:13 +00:00

ti_fw2.h

Use a custom Tigon 2 firmware image, hopefully temporarily. This is

2000-07-26 23:55:34 +00:00

ti_fw.h

Update the Tigon driver to support 1000baseTX gigE over copper AceNIC

2000-07-20 22:24:43 +00:00

uhci_pci.c

Add 440MX chipset.

2000-05-24 02:24:38 +00:00

xmaciireg.h

Reoganize/update the SysKonnect driver:

2000-04-22 02:16:41 +00:00

xrpu.c

Do not depend on FreeBSD 2.2 compatability defines.

2000-05-28 16:18:58 +00:00