Navdeep Parhar 2a857082dc cxgbe(4): Allow negative values in hw.cxgbe.fw_install and take them to ... mean that the driver should taste the firmware in the KLD and use that firmware's version for all its fw_install checks. The driver gets firmware version information from compiled-in values by default and this change allows custom (or older/newer) firmware modules to be used with the stock driver. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications		2019-01-21 18:42:16 +00:00
..
common	cxgbe(4): Clear FW_OK if the firmware reports an error.	2019-01-04 04:15:17 +00:00
crypto	Reject new sessions if the necessary queues aren't initialized.	2019-01-15 18:53:45 +00:00
cudbg	cxgbe(4): Fix unsafe mailbox access in cudbg.	2017-11-21 01:18:58 +00:00
cxgbei	Check for an allocation failure before dereferencing the pointer.	2018-11-26 22:42:52 +00:00
firmware	cxgbe(4): Update T4/5/6 firmwares to 1.22.0.3.	2018-11-19 21:59:07 +00:00
iw_cxgbe	cxgbe/iw_cxgbe: Remove redundant CTRs from c4iw_alloc/c4iw_rdev_open.	2018-12-20 22:39:58 +00:00
tom	Remove unused macros from t4_tom.h.	2018-12-21 20:46:45 +00:00
adapter.h	cxgbe(4): Fall back to a basic configuration in case of any error during	2018-12-06 06:18:21 +00:00
if_cc.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_ccv.c	cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will	2016-09-16 00:08:37 +00:00
if_cxl.c
if_cxlv.c	Chelsio T4/T5 VF driver.	2016-09-07 18:13:57 +00:00
offload.h	cxgbe(4): Use two hashes instead of a table to keep track of	2018-08-15 03:03:01 +00:00
osdep.h	cxgbe(4): Link related changes.	2018-09-25 05:52:42 +00:00
t4_clip.c	cxgbe(4): Do not issue mbox commands after t4_fw_bye.	2018-12-19 19:21:29 +00:00
t4_clip.h	Move CLIP table handling out of TOM and into the base driver.	2018-11-29 01:15:53 +00:00
t4_filter.c	cxgbe(4): Clear the reply-pending status of a hashfilter when the reply	2019-01-20 23:30:16 +00:00
t4_if.m	Use the port device name for the iov device for Chelsio T4/T5 cards.	2016-08-03 17:11:08 +00:00
t4_ioctl.h	cxgbe(4): Allow "pass" filters to distribute matching traffic using a	2018-10-25 14:37:26 +00:00
t4_iov.c	cxgbe(4): Update the VF device ids too. This should have been part	2017-05-05 16:52:25 +00:00
t4_l2t.c	cxgbe(4): Reuse existing "switching" L2T entries when possible.	2018-09-22 01:24:30 +00:00
t4_l2t.h	cxgbe(4): Reuse existing "switching" L2T entries when possible.	2018-09-22 01:24:30 +00:00
t4_main.c	cxgbe(4): Allow negative values in hw.cxgbe.fw_install and take them to	2019-01-21 18:42:16 +00:00
t4_mp_ring.c	cxgbe(4): Use fcmpset instead of cmpset when appropriate.	2018-08-23 16:24:27 +00:00
t4_mp_ring.h
t4_netmap.c	cxgbe: revert r309725	2018-11-28 15:29:58 +00:00
t4_sched.c	cxgbe(4): Make it clear that VI_INIT_DONE implies vi->ntxq > 0, and so	2018-08-21 21:42:17 +00:00
t4_sge.c	cxgbe(4): Move some INTx specific code to a more appropriate place.	2019-01-12 04:44:25 +00:00
t4_smt.c	cxgbe(4): Move all control queues to the adapter.	2018-08-11 21:10:08 +00:00
t4_smt.h	cxgbe(4): Retire an old check.	2018-06-01 01:05:34 +00:00
t4_tracer.c	sys/dev: further adoption of SPDX licensing ID tags.	2017-11-27 14:52:40 +00:00
t4_vf.c	cxgbev(4): Updates to the VF driver to cope with recent ifmedia and	2018-08-23 00:58:10 +00:00