freebsd-skq/sys/dev/usb/controller/ehci_ixp4xx.c
thompsa 410f2a9fd7 ehci_init() will do reset and set the usbrev flag. Fix problem where
ehci_reset() was called before ehci_init().

PR:		usb/140242
Submitted by:	Sebastian Huber
2009-11-08 20:44:55 +00:00

366 lines
9.2 KiB
C

/*-
* Copyright (c) 2008 Sam Leffler. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* IXP435 attachment driver for the USB Enhanced Host Controller.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_bus.h"
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/linker_set.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/ehci.h>
#include <dev/usb/controller/ehcireg.h>
#include <arm/xscale/ixp425/ixp425reg.h>
#include <arm/xscale/ixp425/ixp425var.h>
#define EHCI_VENDORID_IXP4XX 0x42fa05
#define EHCI_HC_DEVSTR "IXP4XX Integrated USB 2.0 controller"
struct ixp_ehci_softc {
ehci_softc_t base; /* storage for EHCI code */
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct bus_space tag; /* tag for private bus space ops */
};
static device_attach_t ehci_ixp_attach;
static device_detach_t ehci_ixp_detach;
static device_shutdown_t ehci_ixp_shutdown;
static device_suspend_t ehci_ixp_suspend;
static device_resume_t ehci_ixp_resume;
static uint8_t ehci_bs_r_1(void *, bus_space_handle_t, bus_size_t);
static void ehci_bs_w_1(void *, bus_space_handle_t, bus_size_t, u_int8_t);
static uint16_t ehci_bs_r_2(void *, bus_space_handle_t, bus_size_t);
static void ehci_bs_w_2(void *, bus_space_handle_t, bus_size_t, uint16_t);
static uint32_t ehci_bs_r_4(void *, bus_space_handle_t, bus_size_t);
static void ehci_bs_w_4(void *, bus_space_handle_t, bus_size_t, uint32_t);
static int
ehci_ixp_suspend(device_t self)
{
ehci_softc_t *sc = device_get_softc(self);
int err;
err = bus_generic_suspend(self);
if (err)
return (err);
ehci_suspend(sc);
return (0);
}
static int
ehci_ixp_resume(device_t self)
{
ehci_softc_t *sc = device_get_softc(self);
ehci_resume(sc);
bus_generic_resume(self);
return (0);
}
static int
ehci_ixp_shutdown(device_t self)
{
ehci_softc_t *sc = device_get_softc(self);
int err;
err = bus_generic_shutdown(self);
if (err)
return (err);
ehci_shutdown(sc);
return (0);
}
static int
ehci_ixp_probe(device_t self)
{
device_set_desc(self, EHCI_HC_DEVSTR);
return (BUS_PROBE_DEFAULT);
}
static int
ehci_ixp_attach(device_t self)
{
struct ixp_ehci_softc *isc = device_get_softc(self);
ehci_softc_t *sc = &isc->base;
int err;
int rid;
/* initialise some bus fields */
sc->sc_bus.parent = self;
sc->sc_bus.devices = sc->sc_devices;
sc->sc_bus.devices_max = EHCI_MAX_DEVICES;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_bus,
USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) {
return (ENOMEM);
}
/* NB: hints fix the memory location and irq */
rid = 0;
sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (!sc->sc_io_res) {
device_printf(self, "Could not map memory\n");
goto error;
}
/*
* Craft special resource for bus space ops that handle
* byte-alignment of non-word addresses. Also, since
* we're already intercepting bus space ops we handle
* the register window offset that could otherwise be
* done with bus_space_subregion.
*/
isc->iot = rman_get_bustag(sc->sc_io_res);
isc->tag.bs_cookie = isc->iot;
/* read single */
isc->tag.bs_r_1 = ehci_bs_r_1,
isc->tag.bs_r_2 = ehci_bs_r_2,
isc->tag.bs_r_4 = ehci_bs_r_4,
/* write (single) */
isc->tag.bs_w_1 = ehci_bs_w_1,
isc->tag.bs_w_2 = ehci_bs_w_2,
isc->tag.bs_w_4 = ehci_bs_w_4,
sc->sc_io_tag = &isc->tag;
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = IXP435_USB1_SIZE - 0x100;
rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(self, "Could not allocate irq\n");
goto error;
}
sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
if (!sc->sc_bus.bdev) {
device_printf(self, "Could not add USB device\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
device_set_desc(sc->sc_bus.bdev, EHCI_HC_DEVSTR);
sprintf(sc->sc_vendor, "Intel");
err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
if (err) {
device_printf(self, "Could not setup irq, %d\n", err);
sc->sc_intr_hdl = NULL;
goto error;
}
/*
* Arrange to force Host mode, select big-endian byte alignment,
* and arrange to not terminate reset operations (the adapter
* will ignore it if we do but might as well save a reg write).
* Also, the controller has an embedded Transaction Translator
* which means port speed must be read from the Port Status
* register following a port enable.
*/
sc->sc_flags |= EHCI_SCFLG_TT
| EHCI_SCFLG_SETMODE
| EHCI_SCFLG_BIGEDESC
| EHCI_SCFLG_BIGEMMIO
| EHCI_SCFLG_NORESTERM
;
err = ehci_init(sc);
if (!err) {
err = device_probe_and_attach(sc->sc_bus.bdev);
}
if (err) {
device_printf(self, "USB init failed err=%d\n", err);
goto error;
}
return (0);
error:
ehci_ixp_detach(self);
return (ENXIO);
}
static int
ehci_ixp_detach(device_t self)
{
struct ixp_ehci_softc *isc = device_get_softc(self);
ehci_softc_t *sc = &isc->base;
device_t bdev;
int err;
if (sc->sc_bus.bdev) {
bdev = sc->sc_bus.bdev;
device_detach(bdev);
device_delete_child(self, bdev);
}
/* during module unload there are lots of children leftover */
device_delete_all_children(self);
/*
* disable interrupts that might have been switched on in ehci_init
*/
if (sc->sc_io_res) {
EWRITE4(sc, EHCI_USBINTR, 0);
}
if (sc->sc_irq_res && sc->sc_intr_hdl) {
/*
* only call ehci_detach() after ehci_init()
*/
ehci_detach(sc);
err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
if (err)
/* XXX or should we panic? */
device_printf(self, "Could not tear down irq, %d\n",
err);
sc->sc_intr_hdl = NULL;
}
if (sc->sc_irq_res) {
bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
sc->sc_irq_res = NULL;
}
if (sc->sc_io_res) {
bus_release_resource(self, SYS_RES_MEMORY, 0,
sc->sc_io_res);
sc->sc_io_res = NULL;
}
usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);
return (0);
}
/*
* Bus space accessors for PIO operations.
*/
static uint8_t
ehci_bs_r_1(void *t, bus_space_handle_t h, bus_size_t o)
{
return bus_space_read_1((bus_space_tag_t) t, h,
0x100 + (o &~ 3) + (3 - (o & 3)));
}
static void
ehci_bs_w_1(void *t, bus_space_handle_t h, bus_size_t o, u_int8_t v)
{
panic("%s", __func__);
}
static uint16_t
ehci_bs_r_2(void *t, bus_space_handle_t h, bus_size_t o)
{
return bus_space_read_2((bus_space_tag_t) t, h,
0x100 + (o &~ 3) + (2 - (o & 3)));
}
static void
ehci_bs_w_2(void *t, bus_space_handle_t h, bus_size_t o, uint16_t v)
{
panic("%s", __func__);
}
static uint32_t
ehci_bs_r_4(void *t, bus_space_handle_t h, bus_size_t o)
{
return bus_space_read_4((bus_space_tag_t) t, h, 0x100 + o);
}
static void
ehci_bs_w_4(void *t, bus_space_handle_t h, bus_size_t o, uint32_t v)
{
bus_space_write_4((bus_space_tag_t) t, h, 0x100 + o, v);
}
static device_method_t ehci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ehci_ixp_probe),
DEVMETHOD(device_attach, ehci_ixp_attach),
DEVMETHOD(device_detach, ehci_ixp_detach),
DEVMETHOD(device_suspend, ehci_ixp_suspend),
DEVMETHOD(device_resume, ehci_ixp_resume),
DEVMETHOD(device_shutdown, ehci_ixp_shutdown),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
{0, 0}
};
static driver_t ehci_driver = {
"ehci",
ehci_methods,
sizeof(struct ixp_ehci_softc),
};
static devclass_t ehci_devclass;
DRIVER_MODULE(ehci, ixp, ehci_driver, ehci_devclass, 0, 0);
MODULE_DEPEND(ehci, usb, 1, 1, 1);