adrian ef169546ae Disable WEP hardware encryption on the AR5210, in order to allow other ... encryption types. The AR5210 only has four WEP key slots, in contrast to what the later MACs have (ie, the keycache.) So there's no way to store a "clear" key. Even if the driver is taught to not allocate CLR key entries for the AR5210, the hardware will actually attempt to decode the encrypted frames with the (likely all 0!) WEP keys. So for now, disable the hardware encryption entirely and just so it all in software. That allows both WEP -and- WPA to actually work. If someone wishes to try and make hardware WEP _but_ software WPA work, they'll have to create a HAL capability to enable/disable hardware encryption based on the current STA/Hostap mode. However, making multi-vap work with one WEP and one WPA VAP will require hardware encryption to be disabled anyway.		2012-11-19 23:42:46 +00:00
..
ath_dfs/null	Disable strong signal diversity when enabling radar pulse detection	2012-09-02 05:01:10 +00:00
ath_hal	Disable WEP hardware encryption on the AR5210, in order to allow other	2012-11-19 23:42:46 +00:00
ath_rate	I've had some feedback that CCK rates are more reliable than MCS 0	2012-10-31 06:35:50 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_alq.c	ath(4) ALQ logging improvements.	2012-11-16 19:39:29 +00:00
if_ath_alq.h	ath(4) ALQ logging improvements.	2012-11-16 19:39:29 +00:00
if_ath_beacon.c	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_pci.c	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_rx_edma.c	Add some hooks into the driver to attach, detach and record EDMA descriptor	2012-11-08 18:11:31 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_sysctl.c	Place 'dev.ath.X.debug' back under ATH_DEBUG, rather than ATH_DEBUG_ALQ.	2012-11-13 19:45:13 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c	* Remove a duplicate TX ALQ post routine!	2012-11-16 19:58:15 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	For AR9380 NICs - the non-enterprise versions don't support RTS protection	2012-11-03 22:13:42 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_ath_tx.c	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath_tx.h	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath.c	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_athdfs.h	Change the ath_dfs_process_phy_err() method to take an mbuf rather than	2012-06-24 08:09:06 +00:00
if_athioctl.h	Implement my first cut at filtered frames in aggregation sessions.	2012-09-18 10:14:17 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Fix the build.	2012-11-10 08:34:40 +00:00