freebsd-skq/sys/cam/ctl/ctl_backend.h
Edward Tomasz Napierala 811772950f Add LUN resizing to CTL. Also make it possible to explicitly set
size when creating file-backed or device-backed LUN.

Reviewed by:	ken (earlier version)
Sponsored by:	The FreeBSD Foundation
2012-03-06 13:43:57 +00:00

294 lines
11 KiB
C

/*-
* Copyright (c) 2003 Silicon Graphics International Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_backend.h#2 $
* $FreeBSD$
*/
/*
* CTL backend driver definitions
*
* Author: Ken Merry <ken@FreeBSD.org>
*/
#ifndef _CTL_BACKEND_H_
#define _CTL_BACKEND_H_
/*
* XXX KDM move this to another header file?
*/
#define CTL_BE_NAME_LEN 32
/*
* The ID_REQ flag is used to say that the caller has requested a
* particular LUN ID in the req_lun_id field. If we cannot allocate that
* LUN ID, the ctl_add_lun() call will fail.
*
* The POWERED_OFF flag tells us that the LUN should default to the powered
* off state. It will return 0x04,0x02 until it is powered up. ("Logical
* unit not ready, initializing command required.")
*
* The INOPERABLE flag tells us that this LUN is not operable for whatever
* reason. This means that user data may have been (or has been?) lost.
* We will return 0x31,0x00 ("Medium format corrupted") until the host
* issues a FORMAT UNIT command to clear the error.
*
* The PRIMARY flag tells us that this LUN is registered as a Primary LUN
* which is accessible via the Master shelf controller in an HA. This flag
* being set indicates a Primary LUN. This flag being reset represents a
* Secondary LUN controlled by the Secondary controller in an HA
* configuration. Flag is applicable at this time to T_DIRECT types.
*
* The SERIAL_NUM flag tells us that the serial_num field is filled in and
* valid for use in SCSI INQUIRY VPD page 0x80.
*
* The DEVID flag tells us that the device_id field is filled in and
* valid for use in SCSI INQUIRY VPD page 0x83.
*
* The DEV_TYPE flag tells us that the device_type field is filled in.
*/
typedef enum {
CTL_LUN_FLAG_ID_REQ = 0x01,
CTL_LUN_FLAG_POWERED_OFF = 0x02,
CTL_LUN_FLAG_INOPERABLE = 0x04,
CTL_LUN_FLAG_PRIMARY = 0x08,
CTL_LUN_FLAG_SERIAL_NUM = 0x10,
CTL_LUN_FLAG_DEVID = 0x20,
CTL_LUN_FLAG_DEV_TYPE = 0x40
} ctl_backend_lun_flags;
#ifdef _KERNEL
#define CTL_BACKEND_DECLARE(name, driver) \
static int name ## _modevent(module_t mod, int type, void *data) \
{ \
switch (type) { \
case MOD_LOAD: \
ctl_backend_register( \
(struct ctl_backend_driver *)data); \
break; \
case MOD_UNLOAD: \
printf(#name " module unload - not possible for this module type\n"); \
return EINVAL; \
default: \
return EOPNOTSUPP; \
} \
return 0; \
} \
static moduledata_t name ## _mod = { \
#name, \
name ## _modevent, \
(void *)&driver \
}; \
DECLARE_MODULE(name, name ## _mod, SI_SUB_CONFIGURE, SI_ORDER_FOURTH); \
MODULE_DEPEND(name, ctl, 1, 1, 1); \
MODULE_DEPEND(name, cam, 1, 1, 1)
typedef enum {
CTL_LUN_CONFIG_OK,
CTL_LUN_CONFIG_FAILURE
} ctl_lun_config_status;
typedef void (*be_callback_t)(void *be_lun);
typedef void (*be_lun_config_t)(void *be_lun,
ctl_lun_config_status status);
/*
* The lun_type field is the SCSI device type of this particular LUN. In
* general, this should be T_DIRECT, although backends will want to create
* a processor LUN, typically at LUN 0. See scsi_all.h for the defines for
* the various SCSI device types.
*
* The flags are described above.
*
* The be_lun field is the backend driver's own context that will get
* passsed back so that it can tell which LUN CTL is referencing.
*
* maxlba is the maximum accessible LBA on the LUN. Note that this is
* different from the capacity of the array. capacity = maxlba + 1
*
* blocksize is the size, in bytes, of each LBA on the LUN. In general
* this should be 512. In theory CTL should be able to handle other block
* sizes. Host application software may not deal with it very well, though.
*
* req_lun_id is the requested LUN ID. CTL only pays attention to this
* field if the CTL_LUN_FLAG_ID_REQ flag is set. If the requested LUN ID is
* not available, the LUN addition will fail. If a particular LUN ID isn't
* requested, the first available LUN ID will be allocated.
*
* serial_num is the device serial number returned in the SCSI INQUIRY VPD
* page 0x80. This should be a unique, per-shelf value. The data inside
* this field should be ASCII only, left aligned, and any unused space
* should be padded out with ASCII spaces. This field should NOT be NULL
* terminated.
*
* device_id is the T10 device identifier returned in the SCSI INQUIRY VPD
* page 0x83. This should be a unique, per-LUN value. The data inside
* this field should be ASCII only, left aligned, and any unused space
* should be padded with ASCII spaces. This field should NOT be NULL
* terminated.
*
* The lun_shutdown() method is the callback for the ctl_invalidate_lun()
* call. It is called when all outstanding I/O for that LUN has been
* completed and CTL has deleted the resources for that LUN. When the CTL
* backend gets this call, it can safely free its per-LUN resources.
*
* The lun_config_status() method is the callback for the ctl_add_lun()
* call. It is called when the LUN is successfully added, or when LUN
* addition fails. If the LUN is successfully added, the backend may call
* the ctl_enable_lun() method to enable the LUN.
*
* The be field is a pointer to the ctl_backend_driver structure, which
* contains the backend methods to be called by CTL.
*
* The ctl_lun field is for CTL internal use only, and should not be used
* by the backend.
*
* The links field is for CTL internal use only, and should not be used by
* the backend.
*/
struct ctl_be_lun {
uint8_t lun_type; /* passed to CTL */
ctl_backend_lun_flags flags; /* passed to CTL */
void *be_lun; /* passed to CTL */
uint64_t maxlba; /* passed to CTL */
uint32_t blocksize; /* passed to CTL */
uint32_t req_lun_id; /* passed to CTL */
uint32_t lun_id; /* returned from CTL */
uint8_t serial_num[CTL_SN_LEN]; /* passed to CTL */
uint8_t device_id[CTL_DEVID_LEN];/* passed to CTL */
be_callback_t lun_shutdown; /* passed to CTL */
be_lun_config_t lun_config_status; /* passed to CTL */
struct ctl_backend_driver *be; /* passed to CTL */
void *ctl_lun; /* used by CTL */
STAILQ_ENTRY(ctl_be_lun) links; /* used by CTL */
};
typedef enum {
CTL_BE_FLAG_NONE = 0x00, /* no flags */
CTL_BE_FLAG_HAS_CONFIG = 0x01, /* can do config reads, writes */
CTL_BE_FLAG_INTERNAL = 0x02 /* don't inc mod refcount */
} ctl_backend_flags;
typedef int (*be_init_t)(void);
typedef int (*be_func_t)(union ctl_io *io);
typedef void (*be_vfunc_t)(union ctl_io *io);
typedef int (*be_ioctl_t)(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
struct thread *td);
typedef int (*be_luninfo_t)(void *be_lun, struct sbuf *sb);
struct ctl_backend_driver {
char name[CTL_BE_NAME_LEN]; /* passed to CTL */
ctl_backend_flags flags; /* passed to CTL */
be_init_t init; /* passed to CTL */
be_func_t data_submit; /* passed to CTL */
be_func_t data_move_done; /* passed to CTL */
be_func_t config_read; /* passed to CTL */
be_func_t config_write; /* passed to CTL */
be_ioctl_t ioctl; /* passed to CTL */
be_luninfo_t lun_info; /* passed to CTL */
#ifdef CS_BE_CONFIG_MOVE_DONE_IS_NOT_USED
be_func_t config_move_done; /* passed to backend */
#endif
#if 0
be_vfunc_t config_write_done; /* passed to backend */
#endif
u_int num_luns; /* used by CTL */
STAILQ_ENTRY(ctl_backend_driver) links; /* used by CTL */
};
int ctl_backend_register(struct ctl_backend_driver *be);
int ctl_backend_deregister(struct ctl_backend_driver *be);
struct ctl_backend_driver *ctl_backend_find(char *backend_name);
/*
* To add a LUN, first call ctl_add_lun(). You will get the lun_config_status()
* callback when the LUN addition has either succeeded or failed.
*
* Once you get that callback, you can then call ctl_enable_lun() to enable
* the LUN.
*/
int ctl_add_lun(struct ctl_be_lun *be_lun);
int ctl_enable_lun(struct ctl_be_lun *be_lun);
/*
* To delete a LUN, first call ctl_disable_lun(), then
* ctl_invalidate_lun(). You will get the lun_shutdown() callback when all
* I/O to the LUN has completed and the LUN has been deleted.
*/
int ctl_disable_lun(struct ctl_be_lun *be_lun);
int ctl_invalidate_lun(struct ctl_be_lun *be_lun);
/*
* To start a LUN (transition from powered off to powered on state) call
* ctl_start_lun(). To stop a LUN (transition from powered on to powered
* off state) call ctl_stop_lun().
*/
int ctl_start_lun(struct ctl_be_lun *be_lun);
int ctl_stop_lun(struct ctl_be_lun *be_lun);
/*
* If a LUN is inoperable, call ctl_lun_inoperable(). Generally the LUN
* will become operable once again when the user issues the SCSI FORMAT UNIT
* command. (CTL will automatically clear the inoperable flag.) If we
* need to re-enable the LUN, we can call ctl_lun_operable() to enable it
* without a SCSI command.
*/
int ctl_lun_inoperable(struct ctl_be_lun *be_lun);
int ctl_lun_operable(struct ctl_be_lun *be_lun);
/*
* If a LUN is locked on or unlocked from a power/APS standpoint, call
* ctl_lun_power_lock() to update the current status in CTL's APS subpage.
* Set the lock flag to 1 to lock the LUN, set it to 0 to unlock the LUN.
*/
int ctl_lun_power_lock(struct ctl_be_lun *be_lun, struct ctl_nexus *nexus,
int lock);
/*
* To take a LUN offline, call ctl_lun_offline(). Generally the LUN will
* be online again once the user sends a SCSI START STOP UNIT command with
* the start and on/offline bits set. The backend can bring the LUN back
* online via the ctl_lun_online() function, if necessary.
*/
int ctl_lun_offline(struct ctl_be_lun *be_lun);
int ctl_lun_online(struct ctl_be_lun *be_lun);
/*
* Let the backend notify the initiator about changed capacity.
*/
void ctl_lun_capacity_changed(struct ctl_be_lun *be_lun);
#endif /* _KERNEL */
#endif /* _CTL_BACKEND_H_ */
/*
* vim: ts=8
*/