d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ef8e539e8d
freebsd-skq/sys/net80211/ieee80211_freebsd.h
adrian 291b1e2469 Bring over my initial work from the net80211 TX locking branch. 
This patchset implements a new TX lock, covering both the per-VAP (and
thus per-node) TX locking and the serialisation through to the underlying
physical device.

This implements the hard requirement that frames to the underlying physical
device are scheduled to the underlying device in the same order that they
are processed at the VAP layer.  This includes adding extra encapsulation
state (such as sequence numbers and CCMP IV numbers.)  Any order mismatch
here will result in dropped packets at the receiver.

There are multiple transmit contexts from the upper protocol layers as well
as the "raw" interface via the management and BPF transmit paths.
All of these need to be correctly serialised or bad behaviour will result
under load.

The specifics:

* add a new TX IC lock - it will eventually just be used for serialisation
  to the underlying physical device but for now it's used for both the
  VAP encapsulation/serialisation and the physical device dispatch.

  This lock is specifically non-recursive.

* Methodize the parent transmit, vap transmit and ic_raw_xmit function
  pointers; use lock assertions in the parent/vap transmit routines.

* Add a lock assertion in ieee80211_encap() - the TX lock must be held
  here to guarantee sensible behaviour.

* Refactor out the packet sending code from ieee80211_start() - now
  ieee80211_start() is just a loop over the ifnet queue and it dispatches
  each VAP packet send through ieee80211_start_pkt().

  Yes, I will likely rename ieee80211_start_pkt() to something that
  better reflects its status as a VAP packet transmit path.  More on
  that later.

* Add locking around the management and BAR TX sending - to ensure that
  encapsulation and TX are done hand-in-hand.

* Add locking in the mesh code - again, to ensure that encapsulation
  and mesh transmit are done hand-in-hand.

* Add locking around the power save queue and ageq handling, when
  dispatching to the parent interface.

* Add locking around the WDS handoff.

* Add a note in the mesh dispatch code that the TX path needs to be
  re-thought-out - right now it's doing a direct parent device transmit
  rather than going via the vap layer.  It may "work", but it's likely
  incorrect (as it bypasses any possible per-node power save and
  aggregation handling.)

Why not a per-VAP or per-node lock?

Because in order to ensure per-VAP ordering, we'd have to hold the
VAP lock across parent->if_transmit().  There are a few problems
with this:

* There's some state being setup during each driver transmit - specifically,
  the encryption encap / CCMP IV setup.  That should eventually be dragged
  back into the encapsulation phase but for now it lives in the driver TX path.
  This should be locked.

* Two drivers (ath, iwn) re-use the node->ni_txseqs array in order to
  allocate sequence numbers when doing transmit aggregation.  This should
  also be locked.

* Drivers may have multiple frames queued already - so when one calls
  if_transmit(), it may end up dispatching multiple frames for different
  VAPs/nodes, each needing a different lock when handling that particular
  end destination.

So to be "correct" locking-wise, we'd end up needing to grab a VAP or
node lock inside the driver TX path when setting up crypto / AMPDU sequence
numbers, and we may already _have_ a TX lock held - mostly for the same
destination vap/node, but sometimes it'll be for others.  That could lead
to LORs and thus deadlocks.

So for now, I'm sticking with an IC TX lock.  It has the advantage of
papering over the above and it also has the added advantage that I can
assert that it's being held when doing a parent device transmit.
I'll look at splitting the locks out a bit more later on.

General outstanding net80211 TX path issues / TODO:

* Look into separating out the VAP serialisation and the IC handoff.
  It's going to be tricky as parent->if_transmit() doesn't give me the
  opportunity to split queuing from driver dispatch.  See above.

* Work with monthadar to fix up the mesh transmit path so it doesn't go via
  the parent interface when retransmitting frames.

* Push the encryption handling back into the driver, if it's at all
  architectually sane to do so.  I know it's possible - it's what mac80211
  in Linux does.

* Make ieee80211_raw_xmit() queue a frame into VAP or parent queue rather
  than doing a short-cut direct into the driver.  There are QoS issues
  here - you do want your management frames to be encapsulated and pushed
  onto the stack sooner than the (large, bursty) amount of data frames
  that are queued.  But there has to be a saner way to do this.

* Fragments are still broken - drivers need to be upgraded to an if_transmit()
  implementation and then fragmentation handling needs to be properly fixed.

Tested:

* STA - AR5416, AR9280, Intel 5300 abgn wifi
* Hostap - AR5416, AR9160, AR9280
* Mesh - some testing by monthadar@, more to come.
2013-03-08 20:23:55 +00:00

579 lines
20 KiB
C
Raw Blame History

/*-
* Copyright (c) 2003-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_FREEBSD_H_
#define _NET80211_IEEE80211_FREEBSD_H_
#ifdef _KERNEL
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/rwlock.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
/*
* Common state locking definitions.
*/
typedef struct {
char name[16]; /* e.g. "ath0_com_lock" */
struct mtx mtx;
} ieee80211_com_lock_t;
#define IEEE80211_LOCK_INIT(_ic, _name) do { \
ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \
snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \
mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF | MTX_RECURSE); \
} while (0)
#define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx)
#define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_LOCK_OBJ(_ic))
#define IEEE80211_LOCK(_ic) mtx_lock(IEEE80211_LOCK_OBJ(_ic))
#define IEEE80211_UNLOCK(_ic) mtx_unlock(IEEE80211_LOCK_OBJ(_ic))
#define IEEE80211_LOCK_ASSERT(_ic) \
mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_OWNED)
#define IEEE80211_UNLOCK_ASSERT(_ic) \
mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_NOTOWNED)
/*
* Transmit lock.
*
* This is a (mostly) temporary lock designed to serialise all of the
* transmission operations throughout the stack.
*/
typedef struct {
char name[16]; /* e.g. "ath0_com_lock" */
struct mtx mtx;
} ieee80211_tx_lock_t;
#define IEEE80211_TX_LOCK_INIT(_ic, _name) do { \
ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock; \
snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name); \
mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF); \
} while (0)
#define IEEE80211_TX_LOCK_OBJ(_ic) (&(_ic)->ic_txlock.mtx)
#define IEEE80211_TX_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_TX_LOCK_OBJ(_ic))
#define IEEE80211_TX_LOCK(_ic) mtx_lock(IEEE80211_TX_LOCK_OBJ(_ic))
#define IEEE80211_TX_UNLOCK(_ic) mtx_unlock(IEEE80211_TX_LOCK_OBJ(_ic))
#define IEEE80211_TX_LOCK_ASSERT(_ic) \
mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_OWNED)
#define IEEE80211_TX_UNLOCK_ASSERT(_ic) \
mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_NOTOWNED)
/*
* Node locking definitions.
*/
typedef struct {
char name[16]; /* e.g. "ath0_node_lock" */
struct mtx mtx;
} ieee80211_node_lock_t;
#define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \
ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \
snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \
mtx_init(&nl->mtx, nl->name, NULL, MTX_DEF | MTX_RECURSE); \
} while (0)
#define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx)
#define IEEE80211_NODE_LOCK_DESTROY(_nt) \
mtx_destroy(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_LOCK(_nt) \
mtx_lock(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_IS_LOCKED(_nt) \
mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_UNLOCK(_nt) \
mtx_unlock(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_LOCK_ASSERT(_nt) \
mtx_assert(IEEE80211_NODE_LOCK_OBJ(_nt), MA_OWNED)
/*
* Node table iteration locking definitions; this protects the
* scan generation # used to iterate over the station table
* while grabbing+releasing the node lock.
*/
typedef struct {
char name[16]; /* e.g. "ath0_scan_lock" */
struct mtx mtx;
} ieee80211_scan_lock_t;
#define IEEE80211_NODE_ITERATE_LOCK_INIT(_nt, _name) do { \
ieee80211_scan_lock_t *sl = &(_nt)->nt_scanlock; \
snprintf(sl->name, sizeof(sl->name), "%s_scan_lock", _name); \
mtx_init(&sl->mtx, sl->name, NULL, MTX_DEF); \
} while (0)
#define IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt) (&(_nt)->nt_scanlock.mtx)
#define IEEE80211_NODE_ITERATE_LOCK_DESTROY(_nt) \
mtx_destroy(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_ITERATE_LOCK(_nt) \
mtx_lock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_ITERATE_UNLOCK(_nt) \
mtx_unlock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt))
/*
* Power-save queue definitions.
*/
typedef struct mtx ieee80211_psq_lock_t;
#define IEEE80211_PSQ_INIT(_psq, _name) \
mtx_init(&(_psq)->psq_lock, _name, "802.11 ps q", MTX_DEF)
#define IEEE80211_PSQ_DESTROY(_psq) mtx_destroy(&(_psq)->psq_lock)
#define IEEE80211_PSQ_LOCK(_psq) mtx_lock(&(_psq)->psq_lock)
#define IEEE80211_PSQ_UNLOCK(_psq) mtx_unlock(&(_psq)->psq_lock)
#ifndef IF_PREPEND_LIST
#define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
(mtail)->m_nextpkt = (ifq)->ifq_head; \
if ((ifq)->ifq_tail == NULL) \
(ifq)->ifq_tail = (mtail); \
(ifq)->ifq_head = (mhead); \
(ifq)->ifq_len += (mcount); \
} while (0)
#define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
IF_LOCK(ifq); \
_IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \
IF_UNLOCK(ifq); \
} while (0)
#endif /* IF_PREPEND_LIST */
/*
* Age queue definitions.
*/
typedef struct mtx ieee80211_ageq_lock_t;
#define IEEE80211_AGEQ_INIT(_aq, _name) \
mtx_init(&(_aq)->aq_lock, _name, "802.11 age q", MTX_DEF)
#define IEEE80211_AGEQ_DESTROY(_aq) mtx_destroy(&(_aq)->aq_lock)
#define IEEE80211_AGEQ_LOCK(_aq) mtx_lock(&(_aq)->aq_lock)
#define IEEE80211_AGEQ_UNLOCK(_aq) mtx_unlock(&(_aq)->aq_lock)
/*
* 802.1x MAC ACL database locking definitions.
*/
typedef struct mtx acl_lock_t;
#define ACL_LOCK_INIT(_as, _name) \
mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF)
#define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock)
#define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock)
#define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock)
#define ACL_LOCK_ASSERT(_as) \
mtx_assert((&(_as)->as_lock), MA_OWNED)
/*
* Scan table definitions.
*/
typedef struct mtx ieee80211_scan_table_lock_t;
#define IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \
mtx_init(&(_st)->st_lock, _name, "802.11 scan table", MTX_DEF)
#define IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_lock)
#define IEEE80211_SCAN_TABLE_LOCK(_st) mtx_lock(&(_st)->st_lock)
#define IEEE80211_SCAN_TABLE_UNLOCK(_st) mtx_unlock(&(_st)->st_lock)
/*
* Node reference counting definitions.
*
* ieee80211_node_initref initialize the reference count to 1
* ieee80211_node_incref add a reference
* ieee80211_node_decref remove a reference
* ieee80211_node_dectestref remove a reference and return 1 if this
* is the last reference, otherwise 0
* ieee80211_node_refcnt reference count for printing (only)
*/
#include <machine/atomic.h>
#define ieee80211_node_initref(_ni) \
do { ((_ni)->ni_refcnt = 1); } while (0)
#define ieee80211_node_incref(_ni) \
atomic_add_int(&(_ni)->ni_refcnt, 1)
#define ieee80211_node_decref(_ni) \
atomic_subtract_int(&(_ni)->ni_refcnt, 1)
struct ieee80211_node;
int ieee80211_node_dectestref(struct ieee80211_node *ni);
#define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt
struct ifqueue;
struct ieee80211vap;
void ieee80211_drain_ifq(struct ifqueue *);
void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *);
void ieee80211_vap_destroy(struct ieee80211vap *);
#define IFNET_IS_UP_RUNNING(_ifp) \
(((_ifp)->if_flags & IFF_UP) && \
((_ifp)->if_drv_flags & IFF_DRV_RUNNING))
#define msecs_to_ticks(ms) (((ms)*hz)/1000)
#define ticks_to_msecs(t) (1000*(t) / hz)
#define ticks_to_secs(t) ((t) / hz)
#define time_after(a,b) ((long)(b) - (long)(a) < 0)
#define time_before(a,b) time_after(b,a)
#define time_after_eq(a,b) ((long)(a) - (long)(b) >= 0)
#define time_before_eq(a,b) time_after_eq(b,a)
struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen);
/* tx path usage */
#define M_ENCAP M_PROTO1 /* 802.11 encap done */
#define M_EAPOL M_PROTO3 /* PAE/EAPOL frame */
#define M_PWR_SAV M_PROTO4 /* bypass PS handling */
#define M_MORE_DATA M_PROTO5 /* more data frames to follow */
#define M_FF M_PROTO6 /* fast frame */
#define M_TXCB M_PROTO7 /* do tx complete callback */
#define M_AMPDU_MPDU M_PROTO8 /* ok for A-MPDU aggregation */
#define M_80211_TX \
(M_FRAG|M_FIRSTFRAG|M_LASTFRAG|M_ENCAP|M_EAPOL|M_PWR_SAV|\
M_MORE_DATA|M_FF|M_TXCB|M_AMPDU_MPDU)
/* rx path usage */
#define M_AMPDU M_PROTO1 /* A-MPDU subframe */
#define M_WEP M_PROTO2 /* WEP done by hardware */
#if 0
#define M_AMPDU_MPDU M_PROTO8 /* A-MPDU re-order done */
#endif
#define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU)
#define IEEE80211_MBUF_TX_FLAG_BITS \
"\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY\5M_ENCAP\6M_WEP\7M_EAPOL" \
"\10M_PWR_SAV\11M_MORE_DATA\12M_BCAST\13M_MCAST\14M_FRAG\15M_FIRSTFRAG" \
"\16M_LASTFRAG\17M_SKIP_FIREWALL\20M_FREELIST\21M_VLANTAG\22M_PROMISC" \
"\23M_NOFREE\24M_FF\25M_TXCB\26M_AMPDU_MPDU\27M_FLOWID"
#define IEEE80211_MBUF_RX_FLAG_BITS \
"\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY\5M_AMPDU\6M_WEP\7M_PROTO3" \
"\10M_PROTO4\11M_PROTO5\12M_BCAST\13M_MCAST\14M_FRAG\15M_FIRSTFRAG" \
"\16M_LASTFRAG\17M_SKIP_FIREWALL\20M_FREELIST\21M_VLANTAG\22M_PROMISC" \
"\23M_NOFREE\24M_PROTO6\25M_PROTO7\26M_AMPDU_MPDU\27M_FLOWID"
/*
* Store WME access control bits in the vlan tag.
* This is safe since it's done after the packet is classified
* (where we use any previous tag) and because it's passed
* directly in to the driver and there's no chance someone
* else will clobber them on us.
*/
#define M_WME_SETAC(m, ac) \
((m)->m_pkthdr.ether_vtag = (ac))
#define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag)
/*
* Mbufs on the power save queue are tagged with an age and
* timed out. We reuse the hardware checksum field in the
* mbuf packet header to store this data.
*/
#define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v)
#define M_AGE_GET(m) (m->m_pkthdr.csum_data)
#define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj)
/*
* Store the sequence number.
*/
#define M_SEQNO_SET(m, seqno) \
((m)->m_pkthdr.tso_segsz = (seqno))
#define M_SEQNO_GET(m) ((m)->m_pkthdr.tso_segsz)
#define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */
struct ieee80211_cb {
void (*func)(struct ieee80211_node *, void *, int status);
void *arg;
};
#define NET80211_TAG_CALLBACK 0 /* xmit complete callback */
int ieee80211_add_callback(struct mbuf *m,
void (*func)(struct ieee80211_node *, void *, int), void *arg);
void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int);
struct ieee80211com;
int ieee80211_parent_transmit(struct ieee80211com *, struct mbuf *);
int ieee80211_vap_transmit(struct ieee80211vap *, struct mbuf *);
void get_random_bytes(void *, size_t);
void ieee80211_sysctl_attach(struct ieee80211com *);
void ieee80211_sysctl_detach(struct ieee80211com *);
void ieee80211_sysctl_vattach(struct ieee80211vap *);
void ieee80211_sysctl_vdetach(struct ieee80211vap *);
SYSCTL_DECL(_net_wlan);
int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS);
void ieee80211_load_module(const char *);
/*
* A "policy module" is an adjunct module to net80211 that provides
* functionality that typically includes policy decisions. This
* modularity enables extensibility and vendor-supplied functionality.
*/
#define _IEEE80211_POLICY_MODULE(policy, name, version) \
typedef void (*policy##_setup)(int); \
SET_DECLARE(policy##_set, policy##_setup); \
static int \
wlan_##name##_modevent(module_t mod, int type, void *unused) \
{ \
policy##_setup * const *iter, f; \
switch (type) { \
case MOD_LOAD: \
SET_FOREACH(iter, policy##_set) { \
f = (void*) *iter; \
f(type); \
} \
return 0; \
case MOD_UNLOAD: \
case MOD_QUIESCE: \
if (nrefs) { \
printf("wlan_##name: still in use (%u dynamic refs)\n",\
nrefs); \
return EBUSY; \
} \
if (type == MOD_UNLOAD) { \
SET_FOREACH(iter, policy##_set) { \
f = (void*) *iter; \
f(type); \
} \
} \
return 0; \
} \
return EINVAL; \
} \
static moduledata_t name##_mod = { \
"wlan_" #name, \
wlan_##name##_modevent, \
0 \
}; \
DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\
MODULE_VERSION(wlan_##name, version); \
MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1)
/*
* Crypto modules implement cipher support.
*/
#define IEEE80211_CRYPTO_MODULE(name, version) \
_IEEE80211_POLICY_MODULE(crypto, name, version); \
static void \
name##_modevent(int type) \
{ \
if (type == MOD_LOAD) \
ieee80211_crypto_register(&name); \
else \
ieee80211_crypto_unregister(&name); \
} \
TEXT_SET(crypto##_set, name##_modevent)
/*
* Scanner modules provide scanning policy.
*/
#define IEEE80211_SCANNER_MODULE(name, version) \
_IEEE80211_POLICY_MODULE(scanner, name, version)
#define IEEE80211_SCANNER_ALG(name, alg, v) \
static void \
name##_modevent(int type) \
{ \
if (type == MOD_LOAD) \
ieee80211_scanner_register(alg, &v); \
else \
ieee80211_scanner_unregister(alg, &v); \
} \
TEXT_SET(scanner_set, name##_modevent); \
/*
* ACL modules implement acl policy.
*/
#define IEEE80211_ACL_MODULE(name, alg, version) \
_IEEE80211_POLICY_MODULE(acl, name, version); \
static void \
alg##_modevent(int type) \
{ \
if (type == MOD_LOAD) \
ieee80211_aclator_register(&alg); \
else \
ieee80211_aclator_unregister(&alg); \
} \
TEXT_SET(acl_set, alg##_modevent); \
/*
* Authenticator modules handle 802.1x/WPA authentication.
*/
#define IEEE80211_AUTH_MODULE(name, version) \
_IEEE80211_POLICY_MODULE(auth, name, version)
#define IEEE80211_AUTH_ALG(name, alg, v) \
static void \
name##_modevent(int type) \
{ \
if (type == MOD_LOAD) \
ieee80211_authenticator_register(alg, &v); \
else \
ieee80211_authenticator_unregister(alg); \
} \
TEXT_SET(auth_set, name##_modevent)
/*
* Rate control modules provide tx rate control support.
*/
#define IEEE80211_RATECTL_MODULE(alg, version) \
_IEEE80211_POLICY_MODULE(ratectl, alg, version); \
#define IEEE80211_RATECTL_ALG(name, alg, v) \
static void \
alg##_modevent(int type) \
{ \
if (type == MOD_LOAD) \
ieee80211_ratectl_register(alg, &v); \
else \
ieee80211_ratectl_unregister(alg); \
} \
TEXT_SET(ratectl##_set, alg##_modevent)
struct ieee80211req;
typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *,
struct ieee80211req *);
SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc);
#define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get)
typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *,
struct ieee80211req *);
SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc);
#define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set)
#endif /* _KERNEL */
/* XXX this stuff belongs elsewhere */
/*
* Message formats for messages from the net80211 layer to user
* applications via the routing socket. These messages are appended
* to an if_announcemsghdr structure.
*/
struct ieee80211_join_event {
uint8_t iev_addr[6];
};
struct ieee80211_leave_event {
uint8_t iev_addr[6];
};
struct ieee80211_replay_event {
uint8_t iev_src[6]; /* src MAC */
uint8_t iev_dst[6]; /* dst MAC */
uint8_t iev_cipher; /* cipher type */
uint8_t iev_keyix; /* key id/index */
uint64_t iev_keyrsc; /* RSC from key */
uint64_t iev_rsc; /* RSC from frame */
};
struct ieee80211_michael_event {
uint8_t iev_src[6]; /* src MAC */
uint8_t iev_dst[6]; /* dst MAC */
uint8_t iev_cipher; /* cipher type */
uint8_t iev_keyix; /* key id/index */
};
struct ieee80211_wds_event {
uint8_t iev_addr[6];
};
struct ieee80211_csa_event {
uint32_t iev_flags; /* channel flags */
uint16_t iev_freq; /* setting in Mhz */
uint8_t iev_ieee; /* IEEE channel number */
uint8_t iev_mode; /* CSA mode */
uint8_t iev_count; /* CSA count */
};
struct ieee80211_cac_event {
uint32_t iev_flags; /* channel flags */
uint16_t iev_freq; /* setting in Mhz */
uint8_t iev_ieee; /* IEEE channel number */
/* XXX timestamp? */
uint8_t iev_type; /* IEEE80211_NOTIFY_CAC_* */
};
struct ieee80211_radar_event {
uint32_t iev_flags; /* channel flags */
uint16_t iev_freq; /* setting in Mhz */
uint8_t iev_ieee; /* IEEE channel number */
/* XXX timestamp? */
};
struct ieee80211_auth_event {
uint8_t iev_addr[6];
};
struct ieee80211_deauth_event {
uint8_t iev_addr[6];
};
struct ieee80211_country_event {
uint8_t iev_addr[6];
uint8_t iev_cc[2]; /* ISO country code */
};
struct ieee80211_radio_event {
uint8_t iev_state; /* 1 on, 0 off */
};
#define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */
#define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */
#define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */
#define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */
#define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */
#define RTM_IEEE80211_SCAN 105 /* scan complete, results available */
#define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */
#define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */
#define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */
#define RTM_IEEE80211_WDS 109 /* WDS discovery (ap mode) */
#define RTM_IEEE80211_CSA 110 /* Channel Switch Announcement event */
#define RTM_IEEE80211_RADAR 111 /* radar event */
#define RTM_IEEE80211_CAC 112 /* Channel Availability Check event */
#define RTM_IEEE80211_DEAUTH 113 /* station deauthenticate */
#define RTM_IEEE80211_AUTH 114 /* station authenticate (ap mode) */
#define RTM_IEEE80211_COUNTRY 115 /* discovered country code (sta mode) */
#define RTM_IEEE80211_RADIO 116 /* RF kill switch state change */
/*
* Structure prepended to raw packets sent through the bpf
* interface when set to DLT_IEEE802_11_RADIO. This allows
* user applications to specify pretty much everything in
* an Atheros tx descriptor. XXX need to generalize.
*
* XXX cannot be more than 14 bytes as it is copied to a sockaddr's
* XXX sa_data area.
*/
struct ieee80211_bpf_params {
uint8_t ibp_vers; /* version */
#define IEEE80211_BPF_VERSION 0
uint8_t ibp_len; /* header length in bytes */
uint8_t ibp_flags;
#define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */
#define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */
#define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */
#define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */
#define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */
#define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */
#define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */
uint8_t ibp_pri; /* WME/WMM AC+tx antenna */
uint8_t ibp_try0; /* series 1 try count */
uint8_t ibp_rate0; /* series 1 IEEE tx rate */
uint8_t ibp_power; /* tx power (device units) */
uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */
uint8_t ibp_try1; /* series 2 try count */
uint8_t ibp_rate1; /* series 2 IEEE tx rate */
uint8_t ibp_try2; /* series 3 try count */
uint8_t ibp_rate2; /* series 3 IEEE tx rate */
uint8_t ibp_try3; /* series 4 try count */
uint8_t ibp_rate3; /* series 4 IEEE tx rate */
};
#endif /* _NET80211_IEEE80211_FREEBSD_H_ */
Reference in New Issue View Git Blame Copy Permalink