e507a852ee
Previously, this worked right if both AUTO_EOI_1 and AUTO_EOI_2 are defined, but not if AUTO_EOI_1 is defined and AUTO_EOI_2 is not defined. The latter case should be the default. DUMMY_NOPS should be the default too. Currently there are only two NOPs slowing down rtcin() (although there are no delays in writertc()) and several FASTER_NOPs slowing down interrupt handling in vector.s. Fix stack offsets for the (previously) unused untested FAST_INTR_HANDLER_USES_ES case.
299 lines
9.2 KiB
ArmAsm
299 lines
9.2 KiB
ArmAsm
/*
|
|
* from: vector.s, 386BSD 0.1 unknown origin
|
|
* $Id: vector.s,v 1.11 1994/12/03 10:03:19 bde Exp $
|
|
*/
|
|
|
|
#include <i386/isa/icu.h>
|
|
#include <i386/isa/isa.h>
|
|
|
|
#define ICU_EOI 0x20 /* XXX - define elsewhere */
|
|
|
|
#define IRQ_BIT(irq_num) (1 << ((irq_num) % 8))
|
|
#define IRQ_BYTE(irq_num) ((irq_num) / 8)
|
|
|
|
#ifdef AUTO_EOI_1
|
|
#define ENABLE_ICU1 /* use auto-EOI to reduce i/o */
|
|
#define OUTB_ICU1
|
|
#else
|
|
#define ENABLE_ICU1 \
|
|
movb $ICU_EOI,%al ; /* as soon as possible send EOI ... */ \
|
|
OUTB_ICU1 /* ... to clear in service bit */
|
|
#define OUTB_ICU1 \
|
|
FASTER_NOP ; \
|
|
outb %al,$IO_ICU1
|
|
#endif
|
|
|
|
#ifdef AUTO_EOI_2
|
|
/*
|
|
* The data sheet says no auto-EOI on slave, but it sometimes works.
|
|
*/
|
|
#define ENABLE_ICU1_AND_2 ENABLE_ICU1
|
|
#else
|
|
#define ENABLE_ICU1_AND_2 \
|
|
movb $ICU_EOI,%al ; /* as above */ \
|
|
FASTER_NOP ; \
|
|
outb %al,$IO_ICU2 ; /* but do second icu first ... */ \
|
|
OUTB_ICU1 /* ... then first icu (if !AUTO_EOI_1) */
|
|
#endif
|
|
|
|
#ifdef FAST_INTR_HANDLER_USES_ES
|
|
#define ACTUALLY_PUSHED 1
|
|
#define MAYBE_MOVW_AX_ES movl %ax,%es
|
|
#define MAYBE_POPL_ES popl %es
|
|
#define MAYBE_PUSHL_ES pushl %es
|
|
#else
|
|
/*
|
|
* We can usually skip loading %es for fastintr handlers. %es should
|
|
* only be used for string instructions, and fastintr handlers shouldn't
|
|
* do anything slow enough to justify using a string instruction.
|
|
*/
|
|
#define ACTUALLY_PUSHED 0
|
|
#define MAYBE_MOVW_AX_ES
|
|
#define MAYBE_POPL_ES
|
|
#define MAYBE_PUSHL_ES
|
|
#endif
|
|
|
|
/*
|
|
* Macros for interrupt interrupt entry, call to handler, and exit.
|
|
*
|
|
* XXX - the interrupt frame is set up to look like a trap frame. This is
|
|
* usually a waste of time. The only interrupt handlers that want a frame
|
|
* are the clock handler (it wants a clock frame), the npx handler (it's
|
|
* easier to do right all in assembler). The interrupt return routine
|
|
* needs a trap frame for rare AST's (it could easily convert the frame).
|
|
* The direct costs of setting up a trap frame are two pushl's (error
|
|
* code and trap number), an addl to get rid of these, and pushing and
|
|
* popping the call-saved regs %esi, %edi and %ebp twice, The indirect
|
|
* costs are making the driver interface nonuniform so unpending of
|
|
* interrupts is more complicated and slower (call_driver(unit) would
|
|
* be easier than ensuring an interrupt frame for all handlers. Finally,
|
|
* there are some struct copies in the npx handler and maybe in the clock
|
|
* handler that could be avoided by working more with pointers to frames
|
|
* instead of frames.
|
|
*
|
|
* XXX - should we do a cld on every system entry to avoid the requirement
|
|
* for scattered cld's?
|
|
*
|
|
* Coding notes for *.s:
|
|
*
|
|
* If possible, avoid operations that involve an operand size override.
|
|
* Word-sized operations might be smaller, but the operand size override
|
|
* makes them slower on on 486's and no faster on 386's unless perhaps
|
|
* the instruction pipeline is depleted. E.g.,
|
|
*
|
|
* Use movl to seg regs instead of the equivalent but more descriptive
|
|
* movw - gas generates an irelevant (slower) operand size override.
|
|
*
|
|
* Use movl to ordinary regs in preference to movw and especially
|
|
* in preference to movz[bw]l. Use unsigned (long) variables with the
|
|
* top bits clear instead of unsigned short variables to provide more
|
|
* opportunities for movl.
|
|
*
|
|
* If possible, use byte-sized operations. They are smaller and no slower.
|
|
*
|
|
* Use (%reg) instead of 0(%reg) - gas generates larger code for the latter.
|
|
*
|
|
* If the interrupt frame is made more flexible, INTR can push %eax first
|
|
* and decide the ipending case with less overhead, e.g., by avoiding
|
|
* loading segregs.
|
|
*/
|
|
|
|
#define FAST_INTR(irq_num, enable_icus) \
|
|
.text ; \
|
|
SUPERALIGN_TEXT ; \
|
|
IDTVEC(fastintr/**/irq_num) ; \
|
|
pushl %eax ; /* save only call-used registers */ \
|
|
pushl %ecx ; \
|
|
pushl %edx ; \
|
|
pushl %ds ; \
|
|
MAYBE_PUSHL_ES ; \
|
|
movl $KDSEL,%eax ; \
|
|
movl %ax,%ds ; \
|
|
MAYBE_MOVW_AX_ES ; \
|
|
FAKE_MCOUNT((4+ACTUALLY_PUSHED)*4(%esp)) ; \
|
|
pushl _intr_unit + (irq_num) * 4 ; \
|
|
call *_intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
|
|
enable_icus ; /* (re)enable ASAP (helps edge trigger?) */ \
|
|
addl $4,%esp ; \
|
|
incl _cnt+V_INTR ; /* book-keeping can wait */ \
|
|
movl _intr_countp + (irq_num) * 4,%eax ; \
|
|
incl (%eax) ; \
|
|
movl _cpl,%eax ; /* are we unmasking pending HWIs or SWIs? */ \
|
|
notl %eax ; \
|
|
andl _ipending,%eax ; \
|
|
jne 1f ; /* yes, handle them */ \
|
|
MEXITCOUNT ; \
|
|
MAYBE_POPL_ES ; \
|
|
popl %ds ; \
|
|
popl %edx ; \
|
|
popl %ecx ; \
|
|
popl %eax ; \
|
|
iret ; \
|
|
; \
|
|
ALIGN_TEXT ; \
|
|
1: ; \
|
|
movl _cpl,%eax ; \
|
|
movl $HWI_MASK|SWI_MASK,_cpl ; /* limit nesting ... */ \
|
|
sti ; /* ... to do this as early as possible */ \
|
|
MAYBE_POPL_ES ; /* discard most of thin frame ... */ \
|
|
popl %ecx ; /* ... original %ds ... */ \
|
|
popl %edx ; \
|
|
xchgl %eax,4(%esp) ; /* orig %eax; save cpl */ \
|
|
pushal ; /* build fat frame (grrr) ... */ \
|
|
pushl %ecx ; /* ... actually %ds ... */ \
|
|
pushl %es ; \
|
|
movl $KDSEL,%eax ; \
|
|
movl %ax,%es ; \
|
|
movl (2+8+0)*4(%esp),%ecx ; /* ... %ecx from thin frame ... */ \
|
|
movl %ecx,(2+6)*4(%esp) ; /* ... to fat frame ... */ \
|
|
movl (2+8+1)*4(%esp),%eax ; /* ... cpl from thin frame */ \
|
|
pushl %eax ; \
|
|
subl $4,%esp ; /* junk for unit number */ \
|
|
incb _intr_nesting_level ; \
|
|
MEXITCOUNT ; \
|
|
jmp _doreti
|
|
|
|
#define INTR(irq_num, icu, enable_icus, reg) \
|
|
.text ; \
|
|
SUPERALIGN_TEXT ; \
|
|
IDTVEC(intr/**/irq_num) ; \
|
|
pushl $0 ; /* dumby error code */ \
|
|
pushl $0 ; /* dumby trap type */ \
|
|
pushal ; \
|
|
pushl %ds ; /* save our data and extra segments ... */ \
|
|
pushl %es ; \
|
|
movl $KDSEL,%eax ; /* ... and reload with kernel's own ... */ \
|
|
movl %ax,%ds ; /* ... early for obsolete reasons */ \
|
|
movl %ax,%es ; \
|
|
movb _imen + IRQ_BYTE(irq_num),%al ; \
|
|
orb $IRQ_BIT(irq_num),%al ; \
|
|
movb %al,_imen + IRQ_BYTE(irq_num) ; \
|
|
FASTER_NOP ; \
|
|
outb %al,$icu+1 ; \
|
|
enable_icus ; \
|
|
incl _cnt+V_INTR ; /* tally interrupts */ \
|
|
movl _cpl,%eax ; \
|
|
testb $IRQ_BIT(irq_num),%reg ; \
|
|
jne 2f ; \
|
|
incb _intr_nesting_level ; \
|
|
Xresume/**/irq_num: ; \
|
|
FAKE_MCOUNT(12*4(%esp)) ; /* XXX late to avoid double count */ \
|
|
movl _intr_countp + (irq_num) * 4,%eax ; \
|
|
incl (%eax) ; \
|
|
movl _cpl,%eax ; \
|
|
pushl %eax ; \
|
|
pushl _intr_unit + (irq_num) * 4 ; \
|
|
orl _intr_mask + (irq_num) * 4,%eax ; \
|
|
movl %eax,_cpl ; \
|
|
sti ; \
|
|
call *_intr_handler + (irq_num) * 4 ; \
|
|
cli ; /* must unmask _imen and icu atomically */ \
|
|
movb _imen + IRQ_BYTE(irq_num),%al ; \
|
|
andb $~IRQ_BIT(irq_num),%al ; \
|
|
movb %al,_imen + IRQ_BYTE(irq_num) ; \
|
|
FASTER_NOP ; \
|
|
outb %al,$icu+1 ; \
|
|
sti ; /* XXX _doreti repeats the cli/sti */ \
|
|
MEXITCOUNT ; \
|
|
/* We could usually avoid the following jmp by inlining some of */ \
|
|
/* _doreti, but it's probably better to use less cache. */ \
|
|
jmp _doreti ; \
|
|
; \
|
|
ALIGN_TEXT ; \
|
|
2: ; \
|
|
/* XXX skip mcounting here to avoid double count */ \
|
|
orb $IRQ_BIT(irq_num),_ipending + IRQ_BYTE(irq_num) ; \
|
|
popl %es ; \
|
|
popl %ds ; \
|
|
popal ; \
|
|
addl $4+4,%esp ; \
|
|
iret
|
|
|
|
MCOUNT_LABEL(bintr)
|
|
FAST_INTR(0, ENABLE_ICU1)
|
|
FAST_INTR(1, ENABLE_ICU1)
|
|
FAST_INTR(2, ENABLE_ICU1)
|
|
FAST_INTR(3, ENABLE_ICU1)
|
|
FAST_INTR(4, ENABLE_ICU1)
|
|
FAST_INTR(5, ENABLE_ICU1)
|
|
FAST_INTR(6, ENABLE_ICU1)
|
|
FAST_INTR(7, ENABLE_ICU1)
|
|
FAST_INTR(8, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(9, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(10, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(11, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(12, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(13, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(14, ENABLE_ICU1_AND_2)
|
|
FAST_INTR(15, ENABLE_ICU1_AND_2)
|
|
INTR(0, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(1, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(2, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(3, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(4, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(5, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(6, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(7, IO_ICU1, ENABLE_ICU1, al)
|
|
INTR(8, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
INTR(9, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
INTR(10, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
INTR(11, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
INTR(12, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
INTR(13, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
INTR(14, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
INTR(15, IO_ICU2, ENABLE_ICU1_AND_2, ah)
|
|
MCOUNT_LABEL(eintr)
|
|
|
|
.data
|
|
ihandlers: /* addresses of interrupt handlers */
|
|
/* actually resumption addresses for HWI's */
|
|
.long Xresume0, Xresume1, Xresume2, Xresume3
|
|
.long Xresume4, Xresume5, Xresume6, Xresume7
|
|
.long Xresume8, Xresume9, Xresume10, Xresume11
|
|
.long Xresume12, Xresume13, Xresume14, Xresume15
|
|
.long swi_tty, swi_net, 0, 0, 0, 0, 0, 0
|
|
.long 0, 0, 0, 0, 0, 0, _softclock, swi_ast
|
|
imasks: /* masks for interrupt handlers */
|
|
.space NHWI*4 /* padding; HWI masks are elsewhere */
|
|
.long SWI_TTY_MASK, SWI_NET_MASK, 0, 0, 0, 0, 0, 0
|
|
.long 0, 0, 0, 0, 0, 0, SWI_CLOCK_MASK, SWI_AST_MASK
|
|
.globl _intr_nesting_level
|
|
_intr_nesting_level:
|
|
.byte 0
|
|
.space 3
|
|
|
|
/*
|
|
* Interrupt counters and names. The format of these and the label names
|
|
* must agree with what vmstat expects. The tables are indexed by device
|
|
* ids so that we don't have to move the names around as devices are
|
|
* attached.
|
|
*/
|
|
#include "vector.h"
|
|
.globl _intrcnt, _eintrcnt
|
|
_intrcnt:
|
|
.space (NR_DEVICES + ICU_LEN) * 4
|
|
_eintrcnt:
|
|
|
|
.globl _intrnames, _eintrnames
|
|
_intrnames:
|
|
.ascii DEVICE_NAMES
|
|
.asciz "stray irq0"
|
|
.asciz "stray irq1"
|
|
.asciz "stray irq2"
|
|
.asciz "stray irq3"
|
|
.asciz "stray irq4"
|
|
.asciz "stray irq5"
|
|
.asciz "stray irq6"
|
|
.asciz "stray irq7"
|
|
.asciz "stray irq8"
|
|
.asciz "stray irq9"
|
|
.asciz "stray irq10"
|
|
.asciz "stray irq11"
|
|
.asciz "stray irq12"
|
|
.asciz "stray irq13"
|
|
.asciz "stray irq14"
|
|
.asciz "stray irq15"
|
|
_eintrnames:
|
|
|
|
.text
|