freebsd-skq/sys/dev/syscons/sysmouse.c
Oleksandr Tymoshenko 4af79d4f2b [evdev] Adds evdev support to sysmouse(4) driver
For horizontal (T-axis) wheel reporting which is not supported by
sysmouse protocol kern.evdev.sysmouse_t_axis sysctl is introduced.
It can take following values:

0 - no T-axis events (default)
1 - T-axis events are originated in ums(4) driver.
2 - T-axis events are originated in psm(4) driver.

Submitted by:	Vladimir Kondratiev <wulf@cicgroup.ru>
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D8597
2016-12-10 18:07:16 +00:00

336 lines
8.8 KiB
C

/*-
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_evdev.h"
#include "opt_syscons.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/priv.h>
#include <sys/serial.h>
#include <sys/tty.h>
#include <sys/ttydefaults.h>
#include <sys/kernel.h>
#include <sys/cons.h>
#include <sys/consio.h>
#include <sys/mouse.h>
#include <dev/syscons/syscons.h>
#ifdef EVDEV_SUPPORT
#include <dev/evdev/input.h>
#include <dev/evdev/evdev.h>
#endif
#ifndef SC_NO_SYSMOUSE
/* local variables */
static struct tty *sysmouse_tty;
static int mouse_level; /* sysmouse protocol level */
static mousestatus_t mouse_status;
#ifdef EVDEV_SUPPORT
static struct evdev_dev *sysmouse_evdev;
static void
smdev_evdev_init(void)
{
int i;
sysmouse_evdev = evdev_alloc();
evdev_set_name(sysmouse_evdev, "System mouse");
evdev_set_phys(sysmouse_evdev, "sysmouse");
evdev_set_id(sysmouse_evdev, BUS_VIRTUAL, 0, 0, 0);
evdev_support_prop(sysmouse_evdev, INPUT_PROP_POINTER);
evdev_support_event(sysmouse_evdev, EV_SYN);
evdev_support_event(sysmouse_evdev, EV_REL);
evdev_support_event(sysmouse_evdev, EV_KEY);
evdev_support_rel(sysmouse_evdev, REL_X);
evdev_support_rel(sysmouse_evdev, REL_Y);
evdev_support_rel(sysmouse_evdev, REL_WHEEL);
evdev_support_rel(sysmouse_evdev, REL_HWHEEL);
for (i = 0; i < 8; i++)
evdev_support_key(sysmouse_evdev, BTN_MOUSE + i);
if (evdev_register(sysmouse_evdev)) {
evdev_free(sysmouse_evdev);
sysmouse_evdev = NULL;
}
}
static void
smdev_evdev_write(int x, int y, int z, int buttons)
{
if (sysmouse_evdev == NULL || !(evdev_rcpt_mask & EVDEV_RCPT_SYSMOUSE))
return;
evdev_push_event(sysmouse_evdev, EV_REL, REL_X, x);
evdev_push_event(sysmouse_evdev, EV_REL, REL_Y, y);
switch (evdev_sysmouse_t_axis) {
case EVDEV_SYSMOUSE_T_AXIS_PSM:
switch (z) {
case 1:
case -1:
evdev_push_rel(sysmouse_evdev, REL_WHEEL, -z);
break;
case 2:
case -2:
evdev_push_rel(sysmouse_evdev, REL_HWHEEL, z / 2);
break;
}
break;
case EVDEV_SYSMOUSE_T_AXIS_UMS:
/* XXX: Edge triggering should be used here */
if (buttons & (1 << 5))
evdev_push_rel(sysmouse_evdev, REL_HWHEEL, 1);
else if (buttons & (1 << 6))
evdev_push_rel(sysmouse_evdev, REL_HWHEEL, -1);
/* PASSTHROUGH */
case EVDEV_SYSMOUSE_T_AXIS_NONE:
default:
evdev_push_rel(sysmouse_evdev, REL_WHEEL, -z);
}
evdev_push_mouse_btn(sysmouse_evdev, buttons);
evdev_sync(sysmouse_evdev);
}
#endif
static void
smdev_close(struct tty *tp)
{
mouse_level = 0;
}
static int
smdev_ioctl(struct tty *tp, u_long cmd, caddr_t data, struct thread *td)
{
mousehw_t *hw;
mousemode_t *mode;
switch (cmd) {
case MOUSE_GETHWINFO: /* get device information */
hw = (mousehw_t *)data;
hw->buttons = 10; /* XXX unknown */
hw->iftype = MOUSE_IF_SYSMOUSE;
hw->type = MOUSE_MOUSE;
hw->model = MOUSE_MODEL_GENERIC;
hw->hwid = 0;
return 0;
case MOUSE_GETMODE: /* get protocol/mode */
mode = (mousemode_t *)data;
mode->level = mouse_level;
switch (mode->level) {
case 0: /* emulate MouseSystems protocol */
mode->protocol = MOUSE_PROTO_MSC;
mode->rate = -1; /* unknown */
mode->resolution = -1; /* unknown */
mode->accelfactor = 0; /* disabled */
mode->packetsize = MOUSE_MSC_PACKETSIZE;
mode->syncmask[0] = MOUSE_MSC_SYNCMASK;
mode->syncmask[1] = MOUSE_MSC_SYNC;
break;
case 1: /* sysmouse protocol */
mode->protocol = MOUSE_PROTO_SYSMOUSE;
mode->rate = -1;
mode->resolution = -1;
mode->accelfactor = 0;
mode->packetsize = MOUSE_SYS_PACKETSIZE;
mode->syncmask[0] = MOUSE_SYS_SYNCMASK;
mode->syncmask[1] = MOUSE_SYS_SYNC;
break;
}
return 0;
case MOUSE_SETMODE: /* set protocol/mode */
mode = (mousemode_t *)data;
if (mode->level == -1)
; /* don't change the current setting */
else if ((mode->level < 0) || (mode->level > 1))
return EINVAL;
else
mouse_level = mode->level;
return 0;
case MOUSE_GETLEVEL: /* get operation level */
*(int *)data = mouse_level;
return 0;
case MOUSE_SETLEVEL: /* set operation level */
if ((*(int *)data < 0) || (*(int *)data > 1))
return EINVAL;
mouse_level = *(int *)data;
return 0;
case MOUSE_GETSTATUS: /* get accumulated mouse events */
*(mousestatus_t *)data = mouse_status;
mouse_status.flags = 0;
mouse_status.obutton = mouse_status.button;
mouse_status.dx = 0;
mouse_status.dy = 0;
mouse_status.dz = 0;
return 0;
#ifdef notyet
case MOUSE_GETVARS: /* get internal mouse variables */
case MOUSE_SETVARS: /* set internal mouse variables */
return ENODEV;
#endif
case MOUSE_READSTATE: /* read status from the device */
case MOUSE_READDATA: /* read data from the device */
return ENODEV;
}
return (ENOIOCTL);
}
static int
smdev_param(struct tty *tp, struct termios *t)
{
/*
* Set the output baud rate to zero. The mouse device supports
* no output, so we don't want to waste buffers.
*/
t->c_ispeed = TTYDEF_SPEED;
t->c_ospeed = B0;
return (0);
}
static struct ttydevsw smdev_ttydevsw = {
.tsw_flags = TF_NOPREFIX,
.tsw_close = smdev_close,
.tsw_ioctl = smdev_ioctl,
.tsw_param = smdev_param,
};
static void
sm_attach_mouse(void *unused)
{
if (!vty_enabled(VTY_SC))
return;
sysmouse_tty = tty_alloc(&smdev_ttydevsw, NULL);
tty_makedev(sysmouse_tty, NULL, "sysmouse");
#ifdef EVDEV_SUPPORT
smdev_evdev_init();
#endif
}
SYSINIT(sysmouse, SI_SUB_DRIVERS, SI_ORDER_MIDDLE, sm_attach_mouse, NULL);
int
sysmouse_event(mouse_info_t *info)
{
/* MOUSE_BUTTON?DOWN -> MOUSE_MSC_BUTTON?UP */
static int butmap[8] = {
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON1UP,
0,
};
u_char buf[8];
int x, y, z;
int i, flags = 0;
tty_lock(sysmouse_tty);
switch (info->operation) {
case MOUSE_ACTION:
mouse_status.button = info->u.data.buttons;
/* FALL THROUGH */
case MOUSE_MOTION_EVENT:
x = info->u.data.x;
y = info->u.data.y;
z = info->u.data.z;
break;
case MOUSE_BUTTON_EVENT:
x = y = z = 0;
if (info->u.event.value > 0)
mouse_status.button |= info->u.event.id;
else
mouse_status.button &= ~info->u.event.id;
break;
default:
goto done;
}
mouse_status.dx += x;
mouse_status.dy += y;
mouse_status.dz += z;
mouse_status.flags |= ((x || y || z) ? MOUSE_POSCHANGED : 0)
| (mouse_status.obutton ^ mouse_status.button);
flags = mouse_status.flags;
if (flags == 0)
goto done;
#ifdef EVDEV_SUPPORT
smdev_evdev_write(x, y, z, mouse_status.button);
#endif
if (!tty_opened(sysmouse_tty))
goto done;
/* the first five bytes are compatible with MouseSystems' */
buf[0] = MOUSE_MSC_SYNC
| butmap[mouse_status.button & MOUSE_STDBUTTONS];
x = imax(imin(x, 255), -256);
buf[1] = x >> 1;
buf[3] = x - buf[1];
y = -imax(imin(y, 255), -256);
buf[2] = y >> 1;
buf[4] = y - buf[2];
for (i = 0; i < MOUSE_MSC_PACKETSIZE; ++i)
ttydisc_rint(sysmouse_tty, buf[i], 0);
if (mouse_level >= 1) {
/* extended part */
z = imax(imin(z, 127), -128);
buf[5] = (z >> 1) & 0x7f;
buf[6] = (z - (z >> 1)) & 0x7f;
/* buttons 4-10 */
buf[7] = (~mouse_status.button >> 3) & 0x7f;
for (i = MOUSE_MSC_PACKETSIZE; i < MOUSE_SYS_PACKETSIZE; ++i)
ttydisc_rint(sysmouse_tty, buf[i], 0);
}
ttydisc_rint_done(sysmouse_tty);
done: tty_unlock(sysmouse_tty);
return (flags);
}
#endif /* !SC_NO_SYSMOUSE */